Purchase Order Item deleted; purchase requsition quantity not update

Hello,
We have PR-20025224 item 130 the quantity ordered is 200 on 2 PO 4200039509 and 4200083799 (100 each)
One of the PO (4200083799) is deleted (No GR)so the quantity ordered should be 100 only in the purchase requisition u201CStatusu201D tab.
Normally the program RM06HL04 should correct the quantity ordered but it does not.
In the status tab in purchase requistion details are as below
Proc Status:- B PO Created
Block ID - Not Blocked
Ord Qty - 200
             - 05 Relese Completed
Thanks to help me in this issue.

Hello Jurgen,
Thanks a lot for the reply.
I checked the deleted PO, in "Delivery Schedule" tab at right end the last column is "PReq Closed" and it is blanked.
Actually the client need is, once the PO deleted, in the purchase requistion "Status" tab "Ord Qty" gets changed (In this case it should reduce by 100 no from 200 nos, because other PO is for 100 nos)
But PR Ord Qty does not changed.
Is it possible that, the PR quantity gets changed once PO deleted?
Thanks for the reply and hep.
Hemant

Similar Messages

  • Last Purchase price is not updated

    Hi
    The last purchase price is not updated when posting a GRPO.
    Any Ideas?
    Its 2005 A SP01 PL48
    Thanks
    Franz

    Check this WIKI
    [Does a Goods Receipt PO update the Last Purchase Price List?|https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=36438427]

  • PO Partial confirmation Quantity not updated for non-catalog items in SRM

    Hi Experts,
    Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
    Steps to Reproduce:
    1) Create a purchase order.
    2) Confirm some part of the quauntity and reject the balance part in Ariba.
    3) Open the link in SRM and click Copy push button.
    4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
    Expected Result:
    PO should update the changes done in Ariba.
    Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as  in the Catalog items partially confirmed POR is copied onto PO.
    kindly give your valuable inputs to poceed furthur.
    Regards,
    Chandu

    Hi,
    I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
    BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
    Regards,
    Masa

  • Sales Order item Delete

    Hi gyes,
        in va02 when i delete the sales order item,is any user exit is fiaring.please help me
    Thanks Jinna

    Hi,
    The following are the User_Exits in Va01/Va02:-
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    <u>Place a breakpoint in these user exit.
    Delete a sales order item and see which exits are called and in which order.</u>
    Regards,
    Sameena

  • Actual Cost & Quantity not update in Process Order

    HI,
    Process order confirmed from Production person before maintain the actity price rate.
    hence those confirmation are gone in to the error & found in t.code COFC
    afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
    but still actual quantity & cost not updated.

    Hi Ajay
    'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
    You may need to raise an OSS message incase the program is not available to download
    BR,Ajay M

  • Sales Order Items Deletion

    We had a LO Extraction problem and the LO queues got deleted from R/3.
    So, we lost some Sales Order Items. We recovered from that by doing a manual setup of those documents and we loaded all the missing documents.
    However, there was another problem which was overlooked. Those Sales Order Items that were deleted at time when queues were deleted, are no longer existing in R/3 but are present in BW.
    We identified those documents and items to be deleted as 14 in number, which isn't that bad, but which is the best way to delete them in BW?
    1) Selective Deletion - doesn't work as we dont have Document number at Cube level.
    All helpful inputs will be rewarded.

    > dear Venky,
    > i think ...
    > try 'export' these 14 docs to text file (csv)
    > and add 0recordmode or 0storno with value 'X',
    > then assign the infosource with new source system
    > 'flat file' and create transfer structure with
    > fields/infoobjects sequence as downloaded file,
    > if you are using ods, i think you may try just the
    > keyfieds.
    > try simulate this in development, first without
    > 0recordmode/0storno = X to add the records to
    > ods/infocube, then give 0recordmode/0storno = x, and
    > see if they are deleted smoothly.
    > hope this helps.
    AHP:
    I was working on last week doing the same, What ended up happening was that The record still existed with all key figures ended up becoming zeroes.
    My flat file had this:
    X;0106662496;X;40
    X;0106662547;X;10
    I tried, X, R & D for the reversal Indicator and the result was same, record still existed and key figures became zeroes in ODS.
    Updating to cube(which doesn't have Doc number) is still another long way to go for me.

  • APO - Retrieval of Order items with Zero confirmed quantity

    Hi all,
    I am developing a report in APO that fetches the sales orders in APO system for a given Product allocation group, Material & Sales organization.
    The retrieval process I use is as follows:
    1. I retrive the list of PLUIDs from table /SAPAPO/QTCHA against the above selection criteria.
    2. Then from table /SAPAPO/SDQTVB I retrive a list of POSIDs which I then pass into table /SAPAPO/POSMAPN to get the orders & their line item numbers.
    But I notice that I am missing those orders line numbers that are having Zero confirmed quantities. Could anyone suggest me the tables from which I can retrive these Zero confirmed order item numbers in APO.
    Regards
    Murthy

    Hi Ahasan,
    I am not using any BAPI, only SELECT logic. Let me know if you have any BAPIs in mind.
    Regards
    Murthy

  • Account Based CO-PA Quantity Not updated in COEP-MEGBTR

    Hello,
    We use account based CO-PA. For  certain Billing transactions, the quantity is not coming to the BW.
    On analysis, we notice that the line item document created in COEP table is not updating the quantity field MEGBTR but only the field MBGBTR.
    Not sure what is cuasing these transactions to post differently.
    Thanks for your help. Murali

    Could you please check note 105747, 911203, 353643 or 188724, This does not pertain to ECC6 but possibly earlier releases.

  • Picked Quantity not updated while using FM in background

    Hi All,
    We have a requirement to update the picking quantity in a delivery order (VL02N) through a custom screen.
    Inorder to do the above operation we are using the  Function Module SD_DELIVERY_UPDATE_PICKING_1. We find a strange behaviour while using this FM.
    The FM updates the picking quantity when executed online, but when called in the program (By passing exactly the same parameters) it does not update the picking quantity even after using a COMMIT WORK command after the function module. While debugging it was found that the XLIPS intl. table and LIPS structure was not being populated when the FM was executed through a function call in program.
    We tried using the WS_DELIVERY_UPDATE, but even this FM behaves in the
    same way.
    Please let us know as to how to over come this issue.
    regards,
    Sandeep

    Hi Babul,
    Thanks for your reply. I actually tried using even the above mentioned FM. But I am faced with the same error. The problem is that in one of the includes LV50LF01 (Subroutine READ_DELIVERY) of the FM, the internal table XLIPS gets refreshed. This happens only when the FM is called in our program.
    regards,
    Sandeep

  • Quantity not updated in EDI Vendor posting

    Hi experts,
    We've observed that Quantity (MENGE) is not getting updated on the FI document (Segment 'E1EDP01'). Idoc type 'INVOIC01' and message we using is 'INVOIC01'.
    Any idea or has anyone come across this issue?
    Thanks for your time.

    Hi,
    Segment E1EDP01, quantity and unit of measure the quantity and the unit of measure are transferred if the corresponding fields in the billing document are filled. If the corresponding fields in the billing document are filled, but MENGE is still not updated into FI document, Maybe you have used the user exit EXIT_SAPLVEDF_002 on SD side to suppress the values.
    Best Regards,
    Gladys

  • SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

    I am having a situation with SSRS 2012 (SP-integrated) report rendered on SP 2013 PerformancePoint Dashboard using linked PerformancePoint (PP) filters.
    The report works fine as long as too many PP filter items are not selected at the same time. When gradually selecting more items from the filter, the report updates itself until more than a sepecific numer of filter items are selected - the report simply
    does not update itself anymore. This "specific number of filter items", when hit, generates the following error in ULS:
    An exception  occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:  System.UriFormatException: Invalid URI: The hostname could not be parsed.    
     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)    
     at System.UriBuilder..ctor(String uri)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.ReportUrl(SqlReportViewData sqlReportViewData)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderSqlReport(TextWriter writer, ReportView sqlReportView)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderReportViewControl(HtmlTextWriter writer, ReportView rv)  PerformancePoint Services error code 20700.
    I already know that the cause of the issue is in the length of the query (perhapse RDL or MDX) that the browser is supposed to pass on to the instance of SSAS.
    Some people had suggested a workaround that was suitable for older versions or non-integrated SSRS (see here: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object).
    Knowing this, have already done the changes suggested (adding the lines suggested to SP's web.config for Reporting and the web.config of the site on which report is rendred) at no avail, just to make sure.
    I have rednered the same report on the same dashboard using SSRS filters and there is no problem; it just works fine. This has to be a bug in PP that is causing this.
    Has anyone had the same problem with SSRS 2012 (SP-integrated) report rendered on SP 2013 PP dashboard using PP filter? Any fixes or workarounds?
    thnx!

    Hello everybody.
    I confirm the issue in Service Pack 1 Release 2.
    Poor workaround is to remove the repeated infromation from the member keys (in SSAS they can be really long).
    The issue seems to be specific to SSRS: Excel Services works well with the same filter.
    Sergey Vdovin

  • In Sales Order form  Freight Charges  form is not updating Freight

    Hi,
    In SAP BusinessOne(8.82) sales order form -> freight charges form  not updating(filling)  the  freight  in amount field.
    It is working on 2007 version .  can  any one  tell which tables to use to update the  Feight .
    Thanks,
    Y.

    Hi Yugandar.....
    Update Freight means what?
    Are you not able to put the freight charges manually?
    Or you are trying to fill it programatically?
    Regards,
    Rahul

  • Purchase order item text version management is not creating.

    Dear sap professionals,
    I have an issue in item text as per customer need I created item text type as drawing number, the problem is when ever an user change drawing number review in text area system should create new version number,  but in present case instead of creating new version number the data is updating in existed version number.
    Same time I am not able to trace field name and table used for this specific drawing number type, do I need to do any new configuration for that or I missed any  thing in this process.
    Did any one experienced same issue?
    With Regards,
    Ranganath

    ranganath.kakarla wrote:
    Dear sap professionals,
    >
    > I have an issue in item text as per customer need I created item text type as drawing number, the problem is when ever an user change drawing number review in text area system should create new version number,  but in present case instead of creating new version number the data is updating in existed version number.
    > Same time I am not able to trace field name and table used for this specific drawing number type, do I need to do any new configuration for that or I missed any  thing in this process.
    > Did any one experienced same issue?
    >
    > With Regards,
    > Ranganath
    Hi,
    path:mm-purchasing-version management-Set Up Version Management for External Purchasing Documents
    Doc.cat will be F means po, Doc type will be NB & p.org of ur client
    in control data active both version acrive & version 0 ok.
    in field selection reason, shorttext& requestor is required option & save
    give the reason for ur inputs
    in Set Up Change Displays category willbe f for all doc types
    Regards
    Raj.

  • Purchase Requsition is not closing automatically During ME59 PO creation

    Hi,
    We are using PO creation through ME59,
    In ME59 we have set the indicator 1 Set reqs. to "closed"
    In PR we have 1 qty and in PO was created for 1 qty. But the PR was not closed.
    When we check the F1 help for the filed it say it will work with respect to the rounding value. as for my concer the PR qty 1 was fulfilled by po with 1 qty creation.  I dont know why the PR was not set to Closed automatically.
    If we try 2 Set reqs. to "closed" It is working
    Can any once explaing why it is not wroking for indicator 1
    Regards
    Palani

    Is your order unit and requisition unit same ?

  • PPDS purchase requisitions are not updated

    Hi,
    I have one Production plant and DC. When i run the PPDS heuristics in production plant and DC for a finished product,system is creating Stocktransport purchase requisition in DC to Plant and a planned order in production plant. Stocktransport purchase requisition needs to be transferred immediately to R/3 and get the number range in R/3 and needs to be updated in APO. But this is not happening.when i run the /n/sapapo/ccr transaction,it shows error that no integration model is active in R/3. But i maintained the integration model for this material for POsand PRs,Sales orders,stocks and all are active.
    When i created STOs directly in R/3 for test,they are updating in APO.Maintained all the settings like publications etc.
    Thanks
    Aktar

    Hi Akhtar,
    Please check the following whether
    1) Quota is maintained
    2) Integration models are active for plants,  material, purchase requisition, stock transport purchase requistion, purchase orders, etc.,
    3) Check whether any struck queues in R/3 and in APO using t-codes like smq1 and smq2
    4) Check sysfails if any and take necessary actions
    5) Check application logs using cfg1 and slg1 t-codes in R/3 and /n/sapapo/c3 and slg1 t-codes in APO
    6) Check whether publication is maintained as immediate transfer
    7) Try using /n/sapapo/c5 t-code to send change pointer manually and check.
    Please confirm
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for