SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

I am having a situation with SSRS 2012 (SP-integrated) report rendered on SP 2013 PerformancePoint Dashboard using linked PerformancePoint (PP) filters.
The report works fine as long as too many PP filter items are not selected at the same time. When gradually selecting more items from the filter, the report updates itself until more than a sepecific numer of filter items are selected - the report simply
does not update itself anymore. This "specific number of filter items", when hit, generates the following error in ULS:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: System.UriFormatException: Invalid URI: The hostname could not be parsed.
at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
at System.UriBuilder..ctor(String uri)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.ReportUrl(SqlReportViewData sqlReportViewData)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderSqlReport(TextWriter writer, ReportView sqlReportView)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderReportViewControl(HtmlTextWriter writer, ReportView rv) PerformancePoint Services error code 20700.
I already know that the cause of the issue is in the length of the query (perhapse RDL or MDX) that the browser is supposed to pass on to the instance of SSAS.
Some people had suggested a workaround that was suitable for older versions or non-integrated SSRS (see here: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object).
Knowing this, have already done the changes suggested (adding the lines suggested to SP's web.config for Reporting and the web.config of the site on which report is rendred) at no avail, just to make sure.
I have rednered the same report on the same dashboard using SSRS filters and there is no problem; it just works fine. This has to be a bug in PP that is causing this.
Has anyone had the same problem with SSRS 2012 (SP-integrated) report rendered on SP 2013 PP dashboard using PP filter? Any fixes or workarounds?
thnx!

Hello everybody.
I confirm the issue in Service Pack 1 Release 2.
Poor workaround is to remove the repeated infromation from the member keys (in SSAS they can be really long).
The issue seems to be specific to SSRS: Excel Services works well with the same filter.
Sergey Vdovin

Similar Messages

CO 1SRJ-001: Too many line items selected via report interface

Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,

Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine.

I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore. Any advice/solution?

I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore.v Any advice/solution?

How to completely remove Office for Mac 2011
Do it per these instructions, don't just put the apps in the trash.

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

Export to PDF Issue (SSRS 2012 with Integration SharePoint 2013)

Problem Description: We have an operational report that returns around 43,000 records, based on a stored procedure. The Stored Procedure itself runs pretty quickly (under ~15 seconds).The report renders in 20 seconds.
However, we get an error like “Sorry, something went wrong” (see below) approximately 2 minutes after we choose/select the PDF as a rendering extension for export. The download of the .PDF never starts.
Sorry, something went wrong
An unexpected error has occurred.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: b66ebd9c-adf0-407e-892e-00d1e37c4feb
Date and Time: 9/29/2014 11:10:20 PM
The 2 minutes is what I get from the execution log... it is actually 122 seconds for timerendering. As for the rs trace log from the web server, see below...
"w3wp!library!471!09/29/2014-23:10:20:: e ERROR: Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException:
An error occurred during rendering of the report. ---> System.ServiceModel.CommunicationException: The remote host closed the connection. The error code is 0x800704CD. ---> System.Web.HttpException: The remote host closed the connection. The error code
is 0x800704CD.
   at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)
   at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()
   at System.Web.HttpResponse.Flush(Boolean finalFlush, Boolean async)
   at System.ServiceModel.Channels.BytesReadPositionStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at System.ServiceModel.Activation.HostedHttpContext.HostedRequestHttpOutput.HostedResponseOutputStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   --- End of inner exception stack trace ---
   at System.ServiceModel.Activation.HostedHttpContext.HostedRequestHttpOutput.HostedResponseOutputStream.CheckWrapThrow(Exception e)
   at System.ServiceModel.Activation.HostedHttpContext.HostedRequestHttpOutput.HostedResponseOutputStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at System.IO.BufferedStream.Write(Byte[] array, Int32 offset, Int32 count)
   at System.Xml.XmlStreamNodeWriter.WriteBytes(Byte[] byteBuffer, Int32 byteOffset, Int32 byteCount)
   at System.Xml.XmlBinaryNodeWriter.WriteBase64Text(Byte[] trailBytes, Int32 trailByteCount, Byte[] base64Buffer, Int32 base64Offset, Int32 base64Count)
   at System.Xml.XmlBaseWriter.WriteBase64(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.ReportingServices.ServiceRuntime.WcfResponseData.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.ReportingServices.ServiceRuntime.WcfResponseStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.ReportingServices.Library.BufferAndOutputStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.ReportingServices.Library.RSStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at System.IO.BufferedStream.Write(Byte[] array, Int32 offset, Int32 count)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.Write(String text)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.EndPage()
   at Microsoft.ReportingServices.Rendering.ImageRenderer.Renderer.ProcessPage(RPLReport rplReport, Int32 pageNumber, FontCache sharedFontCache, List`1 glyphCache)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer.Render(Report report, NameValueCollection deviceInfo, Hashtable renderProperties, CreateAndRegisterStream createAndRegisterStream)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCap
w3wp!wcfruntime!471!09/29/2014-23:10:20:: e ERROR: Reporting Services fault exception System.ServiceModel.FaultException`1[Microsoft.ReportingServices.ServiceContract.RsExceptionInfo]: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException:
An error occurred during rendering of the report. ---> System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo)."
Things Also Done
1) I also tried exporting the report through excel and found no issues (it exports successfully and no issue when i open the file). The size of the exported excel (.xlsx) is 4.28MB. The timerendering value for export to excel is approx. 77 seconds.
2) I also tried creating email subscription (PDF as the rendering format) for that report and it works successfully. The size of the attached PDF from the email is approx. 1.43 MB. I can also open that PDF file with no issue. And the size of the email with
the attached PDF file is approx. 1.48 MB.
That all said, we would like to seek for your assistance to determine what is causing the failure of exporting the report to PDF issue directly from the reporting site. (Let me remind you that the email subscription for the same report with attached
PDF works with no issue)

Hi roel2000,
According to your description, you get error when exporting the report into PDF. It works properly when exporting in excel or PDF format within E-mail subscription. Right?
In Reporting Services, the Excel and MHTML(e-mail subscription) render extensions are soft page break renderers. The PDF render extension is hard page break renderer. It has different render behavior between these two kind of renders. This might cause the
error. Since we are not clear about your report structure, please refer to rules in the link below and do the troubleshooting.
Rendering Behaviors (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS 2012 SP integrated only allows Anonymous Access

We are building a SP2013 farm with SQL2012 and the SSRS 2012 add in , looking at the rsreportserver.config we have added the parameter RSWindowsNegotiate as listed below.
<Authentication>
    <AuthenticationTypes>
      <RSWindowsNegotiate/>
</AuthenticationTypes>
We have followed this article (http://technet.microsoft.com/en-us/library/cc281253.aspx) where the following is listed:
ASP.NET must be configured for Windows Authentication. By default, the Web.config files for the Report Server Web service and Report Manager include the <authentication mode="Windows"> .
However looking at the web.config of the report server the following parameters * (see below)are present but
not the authentication mode='windows', only <windowsAuthentication enabled="true" /> is listed.
* <security>
      <authentication>
        <anonymousAuthentication enabled="false" />
        <windowsAuthentication enabled="true" />
      </authentication>
    </security>
The report server is operational as long as we use datasources located on the same farm but as soon as try to utilize a datasource outside the farm the report server uses anonymous to access the datasource. We have configure the c2wt services and have
the proper spn's in place on the domain , so we should not be suffering from the double hop issue.
How do we configure the reportserver to accept windows authentication?
Any help is welcome.
Regards,
Jim

Hi Jim,
In your scenario, you need to configure the SharePoint mode report server to use Kerberos authentication. Since SQL Server 2012, Reporting Services SharePoint Integrated mode has been changed from a Windows Service to be a SharePoint Shared Service. In this
way, the SharePoint mode report server has its own RSreportserver.config file located in the following directory (SharePoint 2013):
C:\Program Files\common files\Microsoft Shared\Web Server Extentions\15\Web Services\Reporting
So, the document you referred to applies to native mode report server. For SharePoint mode report server, what you need to do is set the Authentication elements in its corresponding configuration file as follows:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate/>
</AuthenticationTypes>
After that, we need to reset the IIS. When creating the SQL Server Reporting Services Service Application, we need to check the “Enable Windows Authentication” option, and select the Integrated Windows authentication type to “Negotiate (Kerberos)”.
Besides, we must register SPNs for both the SharePoint mode and the SQL Server service to which the report data source establish a connection.
Here is an excellent blog about this topic that you can walk through:
http://blogs.technet.com/b/sharepoint_-_inside_the_lines/archive/2013/05/28/sharepoint-2013-with-ssrs-2012-and-constrained-delegation.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

HT1933 How are you supposed to do this when it DOESN'T EVEN WORK!!!! you press report problem and it comes up saying " too many http redirects". Total useless !

How are you supposed to REPORT THE PROBLEM when it DOESN'T EVEN WORK!!
I clicked it as I got a receipt for something that HAS NOT EVEN BEEN BOUGHT ! (It's funny how apple try to charge me twice for something when I work nightshift and my phones switched off!)
and all that happened was it came up saying "too many HTTP redirects" .
And it won't let me report it ! X

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards.

Exclaimer manager signature does not update sent items for outlook 2013 clients when using cached mode

Hi
I have Signature Manager Exchange Edition 2.0.3.0 installed on the hub servers.
I have enabled Sent Items update.
some clients are not getting signature update in the sent items of outlook while using cached mode.
from OWA, and MS Outlook when connected online, the signature is updated in the sent items.
I have two CAS servers and two mailbox servers. all with Exchange 2013 SP1
I tested each CAS server for the URLs of Autodiscover and EWS, with no errors or warnings.
I also test Autodiscover through
https://testconnectivity.microsoft.com . I go successful result.
Outlook clients are updated to the latest version 15.0.4701.1000
for outlook clients; I deleted outlook profile, deleted outlook folder in the user profile, re-created the outlook profile, with no luck.
from Exclaimer event logs on the Hub servers. the sent items update is successfully updating clients. below is the screenshot of an event for one email message which is successfully updated from exclaimer but it did not update on the client outlook while
using cached mode.
Since the issue is with multiple users, I am searching for a centralized solution
Mashhour Faraj

Dear Mashhour
Here you go
Employees can see their email signatures and disclaimers
With Exchange 2013, a Microsoft Outlook user can’t see any added email signatures or disclaimers as they are added to an email when it passes through the Exchange server.
Signature Manager Exchange Edition lets email users see their email signature and corporate disclaimer within the Sent Items of their inbox, giving them visual confirmation of the processed email
Source -
http://blog.exclaimer.com/exclaimer-signature-manager-vs-microsoft-exchange-2013/
Updating to the latest version of signature manager exchange edition will help you to resolve this problem for sure
Or you need to contact them to find a solution on this .
I'm pretty much sure that this problem is related with some version mismatch on their s/w on exchange 2013 which is causing this issue.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Reports in BIDS does not update when stored procedure is modified

Hi,
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have
found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
However, I would like to find a better, and permanent solution. Please comment.
Thank you!

Hi AmirBabazadeh,
Base on my research, this issue is caused by data caching in the Business Intelligence Development Studio (BIDS). When we modify the stored procedure in Management Studio, but the data of the report doesn’t change, then it will try to cached data when reprocessing
the report. In this scenario, we should try to refresh the report/dataset, or delete the .rdl.data file to avoid this issue as you are now doing.
In order to refresh the data of the report, the following two methods are for your reference:
Manual refresh: Re-run the stored procedure with Query Designer in Dataset Properties dialog box.
Auto refresh: Set the AutoRefresh property of report to an appropriate value in the Properties window.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Updated SET but does not update in GR55 report

Hi,
I add few accounts under a new node in Account group hierarchy using transaction KDH2. However when I run GR55 report that uses the SET(hierarchy), the node and accounts does not show.
Kindly advise i am missing a step in the process.
Umang

Check whether any amounts have been posted to the mentioned GL codes. If no postings have been made then ensure that the layout has a settings to display zero rows.
Also try generating the report.
Regards
Rakesh Pawaskar

Report Designer is slow and does not update info.

I am working with Report Designer.
It is running very slow. For first few minutes it runs fine and after that it slows down.
It is only Report Designer which is slow- Query Designer, BEx Analyzer and other applications are running fine.
Does anyone have any idea please?
I also have some other issue with Report Designer.
I created queries in Query Designer and then formatted in report Designer. Now they want to add one more column or row in query. I add that in Query designer but it does not show in report designer.
It does show under Query Element but I donu2019t how to populate whole row and column.
Can someone assist me that how to bring in report designer?
Thanks

Bashir,
make sure that you have the latest SP of SAP GUI installed - it is available in
service.sap.com/swdc under frontend components.
Arun

HT1933 When I try to report a problem, it says "too many http redirects". The page will not open, so I can't report the problem!

How can I get to the report a problem page? The song I bought will not play! It just says "too many http redirects"

Susiebwb wrote:
Can any one please assist me.... I paid twice for an app by mistake.... ...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Turning off VM in guest does not update status in VMM 2012 R2 Update Rollup 2 console

I am seeing an issue with a few VMs where if you turn the VM off from within the guest OS, the status does not change in the VMM console.
Details about the environment:
Six node cluster running Server 2012 R2 Datacenter Core
Cluster validate completed successfully. Only warnings due to some VMs being offline
Virtual Machine Manager 2012 R2 with UR2
251 VMs in cluster used for Citrix XenDesktop and XenApp
I've read a few articles similar to this one that refer to a change in the VM Light Refresher schedule from RTM to SP1. (http://blogs.technet.com/b/chengw/archive/2012/09/17/update-on-vmm-refreshers-what-has-changed-and-what-this-means-to-you.aspx).
Basically it looks like the light VM refresher was turned off and now we depend upon WMI if the environment support WCF 3.0.
Does this mean that we're looking at the WMI on the Host or the Guest? Or, is it possible that I just have WMI corruption in a few guest VMs?
If I want to turn it back on, it seems like I should be able to create a registry DWORD key in HKLM\SOFTWARE\Microsoft\Microsoft System Center Virtual Machine Manager\Settings called VMPropertiesUpdateInterval and set the value. Does this seem plausible?
Would it be supported?

I specifically asked the product team about that.
And this has actually been the behavior all along. However, it was never my experience until after applying UR2.
And this is an experience vs. Product behavior thing. Somewhere in the process something changed with how the one is decided upon when vmm gets more than one match.
I am going to add this to my discussion with them.
Glad we have your issue resolved.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Migo (Movement type 101) does not update quntity in the report.

Dear experts,
I have a custome report for goods receipt (ABAP Query).
In this report, quntity (unrestricted stock) is not updated when I do MIGO (mType 101). The quntity however, is updated in MMBE unrestricted stock columm after MIGO.
Could you please help me how to make quntity updated in the report when I do MIGO with movement type 101?
I thank in advance for all replies.
Jaan
Edited by: Bhajan Singh on Feb 9, 2010 10:19 AM

Thanks R.S. Nambi for your rpely.
The question is solved.
I went to query, then Additional fields and picked movement tyep-quntity field, went to Local fields and added complex calculation for mtype 101.
I am going to close this thread.

SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

Similar Messages

Maybe you are looking for