Purchase Order Pricing Condition and Withholding Tax
Hi
We have investigated Extended Withholding Tax functionality, which appears to be FI specific.
The problem is that we want to have the Purchase Order pricing conditions reflect that some amount is being withheld for tax purposes.
At invoice time, the vendor would invoice for the entire amount (i guess) (ie. 100$) but we would pay the vendor only 80$ and 20$ would go to a withholding tax account...or something like this would happen ...
I have some pricing config knowledge...but limited
Can anyone tell me
a) if this is possible?
b) any hints on how to go about this?
Also noticed a 'withholding tax code' field on MEK1 - Create Condition Records. .... which appears as display only depending on how i configure my condition type - haven't figured out how to use this field or what is means...
Thank-you !!!
Hi,
If you are using the standard PO Print then check in M/08 and check for that Condition Type whether Print Indicator is "X"? If it is is Z-Print Program then take help of ABAPer.
Similar Messages
-
Purchase Order:Pricing condition report
Hello Experts,
Greetings.
I would like to know that is thair any such report avaible by executing particular pricing condition we may know how many purchase order have been created against that particualr condition.(i.e purchase order list - pricing condition wise)
Any help would be highly appriciated.
Best Rgds
NitinHi
I dont think so there any report which you will give condition against Po
but we can check this in table or develop with help of ABAp consultant
in se16n t-code give table EKKO AND GET CONDITION number field KNUMV and pass this number
Now pass this into table KONV and find condition against PO
Regards
Kailas Ugale -
Regarding purchase order pricing conditions using exits or badi
Hi friends can anybody help me and let me know the solution.
Please explain how the change in the pricing condition amount value should update the cost in PO.
and which EXITS or BADI use for .
if anybody have the solution send me reply AS SOON AS
Thanks,
srinivasOK
But the problem is pricing conditions like transport cost. Because when I do a new purchase order the system use last transport cost and i don´t want it.
What I want (if possible) with infoupdate is:
- Update ( PBXX & PB00)
- Don´t update (other conditions like transport).
Thanks.... -
Purchase order pricing condition
Hi,
we have a item level condition of octroi value in my purchase order. even though user is maintaining during po creation it's not impacting total po value.
how to check this and configure to have impact on total po?
what is the meaning and impact of 'Group condition' in condition type details?Hi,
Please check if the octroi condition is ticked as statistical in calculation schema
Remove the tick and it will add to the netpr
The condition cat should be freight if u dont want separate line item at the time of GR
else it should be B delivery costs and you have to assign account key in calculation schema
Group conditions are created for inter dependency of conditions
BR
Diwakar -
Developed a report which gives PO(Purchase Order) Pricing details.
hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report which gives PO(Purchase Order) Pricing details.
thanks in advance,
radhakrishnaHello Radhakrishna,
you can use the function module
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = wa_komk
LANGUAGE = ' '
IMPORTING
COMM_HEAD_E =
COMM_MWSKZ =
TABLES
tkomv = gi_komv
tkomvd = gi_komvd.
in wa_komk pass the condition record number.
this you will get from your vbak table
reward points if helpful -
Purchase order print priview and spool print output are different.
Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards, -
Purchase Order Pricing Procedure
Can someone send me the path to maintain and enhance the purchase order pricing procedure.
Will reward
Thanks,
RichardSpro -> Materials Management - >Purchasing -> Conditions -> Pricing conditions
Thanks,
MV -
VAT and Withholding tax setup for Philippine
Hi ,
Anyone is familiar with the VAT and Withholding tax setup for Philippine.
What is the VAT and WHT config in order to fuilfil the following example.
Appreciate if someone is able to provide me some help on this. Thank you.
Invoice Amount of P 1,120.00 gross of VAT
Services Sales to Private
ENTRY TO RECORD REVENUE Debit Credit
Accounts Receivable 1,120.00
Vat Consultancy Set-Up 120.00
Revenue 1,000.00
ENTRY UPON COLLECTION
Cash in Bank 1,100.00
Taxes Payable - BIR ITR 20.00
Vat Consultancy Set-up 120.00
VAT Consultancy Payable 120.00
Accounts Receivable 1,120.00Additional Information
Value Added Tax Reporting:
Advance Return for Tax on Sales/Purchases (VAT Reporting)
Use
In the Philippines, companies are required to submit Bureau of Internal Revenue (BIR) forms 2550M for the monthly (value-added tax) report and 2550Q for the quarterly VAT report. However, these forms also include information not provided by the SAP System, such as advance payments. Using the Advance Return for Tax on Sales and Purchases report, you can print the relevant VAT data and enter it in forms 2550M and 2550Q.
Integration
The report is based on the SAP List Viewer (ALV), which enables you to define your own display variants, according to the BIR requirements listed below.
Activities
To access the report, from the SAP Easy Access screen, choose Accounting --> Financial Accounting --> General Ledger --> Reporting --> Tax Reports --> General --> Advance Return for Tax on Sales/Purchases --> Advance Return for Tax on Sales/Purchases.
You need to make the following settings, in addition to your specific selection criteria:
Under Set the following indicator(s)
Output control Read address data
Output lists Output tax: Line items
Input tax: Line items
You need to define your SAP List Viewer display variant to include the following data on the VAT report, as required by the BIR:
u2022 Reporting company's name and TIN
u2022 Vendor or customer name
u2022 Vendor or customer TIN
u2022 Vendor or customer address
u2022 Document date
u2022 Document number
u2022 Reference number
u2022 Invoice amount
u2022 VAT amount
Withholding tax reports
Generic Withholding Tax Reporting
Use
You use the Generic Withholding Tax Reporting tool to generate withholding tax data for withholding tax reports submitted to the Philippine Bureau of Internal Revenue (BIR) and vendor certificates, as follows:
u2022 BIR form 1601 u2013 Monthly Remittance Return of Income Taxes Withheld
u2022 BIR form 2307 u2013 Certificate of Creditable Tax Withheld at Source
u2022 BIR form 1604 u2013 Annual Information Return of Income Tax Withheld on Compensation, Expanded and Final Withholding Taxes
Features
SAP delivers standard report variants and Smart Forms for each of the reports and the certificate, which are listed below.
SAP also provides a display variant for the output lists, 1SAP, which you can specify under Output control and lists in the Display variant column.
BIR 1601
SAP provides withholding tax data for page 3 of the form. The form comprises three sections u2013 expanded withholding tax, final tax based on the regular rate, and final tax based on treaty rates. Within each of these sections, the data is summarized according to the nature of the income payment (ATC code). For more information, see Withholding Tax Code.
The predefined report variant for BIR 1601 is SAP&PH_1601, and the Smart Form is IDWTCERT_PH_1601.
BIR 2307
The predefined report variant for BIR 2307 is SAP&PH_2307, and the Smart Form is IDWTCERT_PH_2307.
BIR 1604
You use BIR form 1604 to report expanded and final withholding tax for all nonemployee transactions.
SAP provides the three required sections of form 1604: alphalists 3, 4 and 5 (schedules):
Section of BIR 1604 -DESCRIPTION - Predefined report variant - Smart Form
Alphalist 3 Payables subject to expanded withholding tax SAP&PH_1604-3 IDWTCERT_PH_1604_SCHEDULE3
Alphalist 4 Payees subject to final withholding tax SAP&PH_1604-4 IDWTCERT_PH_1604_SCHEDULE4
Alphalist 5 Other payees whose income payments are exempt from withholding tax issued but subject to income tax SAP&PH_1604_5 IDWTCERT_PH_1604_SCHEDULE5
Prerequisites
For each withholding tax report, note the required Customizing settings for the corresponding output group.
Activities
To access the report, from the SAP Easy Access screen, choose Accounting --> Financial Accounting -->Accounts Receivable --> Withholding Tax --> Generic Withholding Tax Reporting.
The Generic Withholding Tax Report has several options for reporting.
The report can be run without the Output Group field populated, or it can be run with one of the PH1 to PH5 options as it relates to the reporting forms/requirements
Hope this piece of information is helpful to you. -
Change the Purchase Order : Item - Conditions value
Hi,
How to change the Purchase Order : Item - Conditions value.
In my PO, Item conditions shows the SKTO - Cash Discount value is 0. I want to change the Discount value 10.
How can i change it??Hi,
Goto the Transaction code MN05 and give the CONDITION TYPE SKTO and change the value
MN05 is the Transaction code for Purchase order condition types.
Please check and revert back if you need more details.
regards,
santosh -
Sales order pricing conditions
Can any one let me know what are the tables that are updated while working with sales order pricing conditions ....... r sales order conditions
Hi Ali,
VBRK Billing document :header data
VBRP Billing document :Item data
KONH Conditions header
KONP Conditions items
KONV Procedure ( billing doc or sales order)
KOND Conditions (data)
These tables will give sufficient information on Sales order pricing and its billing conditions etc.
best regards
Ramakrishna -
Table for special G/L indicator and withholding tax?
Hi experts,
Iu2019m trying to post a vendor invoice on F-02. When I use vendor invoice posting key the system brings withholding tax automatically but when I use special G/L indicator (incoming credit posting ) withholding tax is not coming.
Is there any connection between posting key and withholding tax or special G/L indicator? Where should I correct this error?
Thanks by now
Edited by: Hande Yaman on May 31, 2011 5:01 PMDear,
You can check out relationship between posting key and wht by checking Field status group of posting key in OB41. Now comming to the problem with your special GL indicator with no WHT posting, you need to check FSG of Special Gl indictator in OBYR and special GL in OBC4. Look if its suppressed there.
Regards -
Third Party Order pricing conditions copy to PO
Hello,
I have few pricing conditions in the 3rd party sales order. I want those conditions to be reflected in the 3rd party PO.
Is there anyway to copy third party sales order pricing condition types to the PO?
Cheers
Anand.Dear Anand,
Try with,
T. Code: ME11 - Create Info Records
Maintain the same condition in the info-record. The price shall be picked up in the PO by the inforecord.
Best Regards,
Amit -
How to create AP payment terms and withholding tax from backend ?
Hi All,
I have a requirement to create the AP Payment terms and withholding tax from backend as the data is going to be uploaded into 15 different instances therefore for the convenience i am looking for any API or Interface to create these from backend.
Thanks & Regards,
MayurHi Gurus,
Please give me some information on this.
Thanks,
Mayur -
SRM: "Purchase Order Change Approval " and "Invoice Approval"
Hi,
I would like to know the availability and details of the backend services for "Purchase Order Change Approval " and "Invoice Approval".
Any pointers ?
regards
SachinI want to know what are the Backend services exposed for the following processes :
Purchase Order Change Approval in MM
and Invoice Approval. -
Product type 55c rupee term loan tds and withholding tax deducted
Dear team
any one guide me while posting intrest by using t code tbb1 systen calculates tds and withholding tax but i want only tds how can i remove withholding tax . Pls respond urgently
sarathHi,
...in case you get the Witholding Tax flow in Treasury-module already (-> check cashflow;), the flow comes from "Derived Flows" setting. the flow then already exists before running TBB1...
Regards,
Lorenz
Maybe you are looking for
-
Error when preview the crystal report
Hi All, When i am click on preview button in crystal report it show an error: error:- could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=12.0.2000.0, Culture=nutral, PublicKeyTocken=,culture= neutral,publickeytoken692fbea5521e13
-
How do I find firmware upgrades for a 1.66 Mac mini, or any mac
We have a Mac Mini 1.66 processor. I have updated all of the software, but notice that there are no firmware updates. How do you find applicable firmware updates? I looked at my son's Macbook Pro and see that there is a Mac Mini firmware update liste
-
Notes field in Add Bk not syncing on mobileme
I sync my Add Bk using mobileme. While on a trip, I put together a smart group from my entire address book (on my MacBook). The smart group is based on a note that I added to the Notes field on particular cards. This is not syncing over to my desktop
-
Hashmap,objectoutputstream,CPU usage
hi java gurus , i am developing a appln which will constantly write a hashmap to a file through objectoutput stream through serialisation.so by this approach when i need to add a new record i need to read the whole file store it in a hashmap and then
-
What software is bundled with CS5.5?
My company is requiring each site verify that all software installed on every computer has been properly licensed (or does not require a license). I have CS5.5 Suite installed on two computers that are reporting having Creative Dynamic Link CS(1.0),