Purchase transfer issues for Garageband or other inapp purchase

Can I purchase Garage band inapp collection from one account and sync it to a different apple account after downloading the app to my ipad?

What happens if i put one apple ID which has credit card and make the garageband inapp purchase and then sign out and sign in to my apple id which does not have credit card aand back the app up in my account....Any possibility???

Similar Messages

Bass amp recommendations for Garageband or other software I can use?

Hi folks. I would like my bass dynamics in my recordings to be a bit better than they are. Using Apogee Jam for recordings and latest GB for iOS. Any way to do this? Physical bass amp pedal I can hook up? Something better than playing through the software GUITAR amps that are offered? Thanks.

Not that I know of, but you definitely need a relational database for this, and FileMaker is the best there is.
It might be worth asking them if they already have a template for your purpose.
Of course, they also make a simpler and cheaper version called Bento:
http://www.filemaker.co.uk/products/bento/
I have never used it but it might be worth a look?

InApp purchase issue for my newsstand app

Hi,
I am having a strange issue while subscribing for auto renewable product.
I have created a test user account and which works fine for non renewable product and restoration. In the case of auto renewable subscription, it is asking for test account verification and couldn't test the auto renewable subscription. Why it's required for test account. Following is getting me
Verification Required
Before you can make purchases, you must tap Continue to verify your payment info.
[Environment: Sandbox]
I have created almost many test user accounts in itunesconnect now with no luck, i always sign out of the app store on the device before running the app for test, then use the test user log in when testing the iap in the app itself, but keeps saying the same thing.
I tried all the ways mentioned in many posts for the similar issue, like not logging in to itunes account from settings page. But no luck. The strange thing is that non renewable purchase and the restoration process works fine with the same account. Any ideas? I am facing this issue for the last week and I could release the app because of this bloody issue.
Thanks and regards,
Sree

Well, what happens now when you try to purchase a gem with your new card info?

Issue at the time of creation of transfer order for inbound delivery

Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
Nikhil

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Date difference issue for Purchase order in R/3 and APO

Hi,
I am sending the purchase order from APO to R/3. When I transfer the data through CIF and see the curresponding entries in stock requirement list in R/3, purchase order is 1 day earlier than in SCM.
However, when this purchase order is CIFed back to SCM, date appears correct in SCM ( as what it was before). Is this something because of timezone that difference in date appears in SCM and R/3.
Can someone who came across date issues for transaction data transfer between SCM and R/3 elaborate in more detail please.
Thanks,
Sanjay

Hello Somnath ,
I am also facing the same issue which sanju was facing earlier in PRs .
In APO I am not able to understand how system calculates the opening , start and end date .In my case the transportation time is 48 hrs , planned delivery time is 1 day and all calenders are 5*24 , GR proceeeing time .01 day . When I am creating PR at destination location on 06/06/2008 , 24:00:00 Hrs . System calculates the dates as follows :-
Start date -06/05/2008 , 00:45:00 , end date -06/06/2008, 24:00:00 , opening date -05/20/2008 ,23:25:00 Hrs . I tried to understand the formula given by you in your reply as Opening Date = Requirement Due Date - GR Time - Planned Delivery Time
Start Date = Requirement Due Date - GR time - Transportation Duration
End date = Requirement Date.
But I am not getting the desired results.
Could you let me know why the system is behaving in such way.I also want to know does system can create orders in such a way the opening date lies in past. If yes then can we restrict that ?
Regards ,
Mukesh
Edited by: Mukesh Kumar on Mar 9, 2008 1:59 PM

TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

HT201209 Can I purchase iTunes gift cards for people in other countries to use?

Can I purchase iTunes gift cards for people in other countries to use? I have a brother that lives in Vietnam and I want to buy him a gift card that he can use there. I've read the iTunes gift cards are country specific.

What you have read is correct; gift cards are country specific. So only if iTunes cards are issued in Vietnam, and if they are if you can find a retailer there that sells such cards and would accept an out-of-country credit card, would you be able to purchase a gift card for your brother. The same would apply to any other country.
Regards.

Purchase all content for Garageband 10.0.1 doesn't work.

Purchase all content for Garageband 10.0.1 doesn't work.
From the App I choose the purchase option, it leads me to my account.
After loggin the App Store Screen remains white (no information at all)
How to solve this problem?

surched the internet and it seems you have to puchase an App (not an in-App) first
You'll get a message saying its your first purchase after installing Maverick.
It solves the problem and other purchases in-App like Gragaband will work

Goods issue for API DI transfer

hi experts, I have SAP BO and I want to make a goods issue for API DI transfer with excel macro, is that possible??

Hi,
I think for UOM KG ,decimal places are not defined in CUNI transaction.
Please refer the link for UOM related settings
http://wiki.sdn.sap.com/wiki/x/E4zjBw
here in CUNI no of decimal places for KG its its 0,that y system is not allowing you to maintain in decimals.but it will allow you to maintain in BOM(it will give only warning message)
Hope it helps

Stereo Bluetooth - no support for controls and other issues

I have tried 2 stereo headsets now and both have the same issue. No controls other than Vol +/- are supported. Pause/Play doesn't work and >| and |< don't work. It's pretty clear that the 3.0 software doesn't support these functions.
One Headset is the new Sony BT100CX. The other is Insignia.
Are others getting the same results?
I also get some bizarre results with the Stereo Headset, like no audio in one direction on a phone call. Then when I switched to iPhone from Bluetooth and hung up, the call actually stayed open! Another time I connected to the Sony BT and got constant static.
I spent a long time talking to a nice but not very knowledgeable gentleman at Apple Support who consulted an "specialist." The specialist did not seem to know whether these controls are supported or not. It is bizarre that Apple is paying so little attention to bluetooth. Having waited years for decent bluetooth support, you would would think they would want to get it right when they finally put it in, but they leave out VERY valuable features. And they don't even seem to know that they left out these features. A simple pause in the iPhone in Ipod mode is a PITA. With the Bluetooth stereo profile it should be easy.

Thanks. That page says the 3G supports the AVRCP profile, http://en.wikipedia.org/wiki/Bluetoothprofile#Audio.2FVideo_Remote_Control_Profile.28AVRCP.29. Version 1.0 of the profile includes pause/play etc. It is clear that although they claim support, it does not work.
Are others not having this issue?

Issue during Transfer Order for Process Order

Hello,
Can anyone tell me how can I create a Transfer Order for picking items once the Process Order is created.
I have created a Process order and released it abd trying to create a Transfer Order via LB13 but it says " No data available for criteria specified:
I am missing some steps before I create the TO or something is missed in the configuration.
Can someone tell me the steps after creation of Process Order until the confirmation mainly the WM steps.
Please let me know ASAP
Thank you
SAP FAN....

Hi,
As far as I know in case of PrdOrds you can:
1. Book GI (mvt 261) and after that start to process the TR from LB10.
2. Set up WM-PP interface (http://help.sap.com/saphelp_47x200/helpdata/en/c6/f840fb4afa11d182b90000e829fbfe/frameset.htm)
2a) Set SAP to create TR when releasing and saving the PrdOrd
2b) LP10
(In case of pick parts...)
Regards,
Csaba

HT2518 After using Migrate Assistant, I made several accounts for every attempt to migrate files from PC to Mac. How can I put all accounts together into one? How can I transfer the files from the other accounts to my primary account?

Okay, so I did the entire Migrate Assistant process to transfer all my files and what not to my MacBook. Problem is that I did it on seperate occasions and now I have several accounts.
How can I transfer my files from the other accounts to my primary account and delete the other accounts?

Problem is that I did it on seperate occasions and now I have several accounts.
If you had read carefully, Migration Assistant asks what you want to do in this event. That would have precluded the redundancy.
Part of the fundamental design of OS X is to separate user accounts so that one user can't interfere with another. It's not possible to directly merge an account with another, but you can copy whatever you need to the Shared folder - it is in your Users folder.
Log in to one account, prefereably a smaller one, and drag the files and folders into Shared. Log out, log into the account you want to be "primary" and drag the files from Shared into their appropriate locations. When you have copied everything you need delete the redundant account.
Do this for each of them.
Or, you can just run Migration Assistant again and follow the prompts that address the situation you described. It involves creating a secondary, temporary account from which you can administer the transfer. When it is complete you delete the temporary account(s).

How to execute 261 goods issue for REM order items other than with MFBF?

Our users are looking for an easy way to post a 261 goods issue for a single component of a repetitive manufacturing order without using the MFBF transaction where they have to deselect all other components of the order.
The ideal situation would be to use a transaction similar to MB1C or MB11 to simply enter the planned REM order, component material id, and its respective quantitiy and then post.
Any information you can provide will be helpful.

Strat,
Thank you for your response but LT01 does not seem to provide the functionality that I am looking for.
To clarify, our users would like to complete a 261 movement for a single component within a particular repetitive manufacturing, without going into the MFBF transaction and having to deselect all of the unnecessary components just to single out one.
So ideally we would like to use the MB1C transaction for a 261 movement. Enter in a REM order, the material id, and the quantity to be issued and simply post a single material. Currently when we attempt to do this with MB1C we receive the error M7162 that our order, which is a product cost collector, cannot be processed with this transaction.
Hope this helps clear it up and thanks again for your response.
- Nick

IChat for inter office comm. issues with seeing any other buddies on the sa

Hello Apple Forums!
I have a question regarding my ichat service running on a 10.6.2 machine (x-serve)
I had 1 user today that I set up on our ichat, and when I added her, logged in to the server, however no buddy list. My experience with all other users is when they are added, they immediately see all the other users who are logged in. Im not sure how to resolve this. I know have to add buddies to all the internal employees in order for them to see her. Can someone please tell me what I am doing wrong?
Please let me know what other information you need.
Thanks,
Originally posted in wrong 10.5 forum, reposting responses here:
tibor.moldovan
If the service is running OK for the other users, it is possible that that user's iChat program needs to have its preferences cleared.
username/Library/Preferences/com.apple.iChat...
and then set up that iChat account again.
If you try to set up a test account does the same thing happen?
Tim Harris
Hello,
This is the iChat 10.5 server forum. There is a 10.6 forum which is perhaps a better place to post your question.
I know have to add buddies to all the internal employees in order for them to see her. Can someone please tell me what I am doing wrong?
Are you saying you HAVE added them, and none show?
And finally my response to the above 2 Q's:
cpguru21
tibor.moldovan:
I have researched this issue for a while now. I have cleared all the local preferences on the end users machine. I have not set up a test user, however I will. All other clients I have added recently, the entire "workgroup" (everyone part of the same workgroup) show up. Come to think of it, this particular user is in more than one workgroup. Hmmm. Maybe this is related to what is going on? If the "workgroup" group is not primary, then she wouldn't necessarily see everyone else?
Tim:
Adding (or sending buddy requests) to the other users in the ichat server (this is a local ichat for interoffice comm only) when accepted, those "added" buddies show up fine and can communicate.

Thanks for reply Tim.
The "issue" may not be an issue. the issue may be my understanding of workgroups and how they come into play for iChat.
My initial problem/issue:
when I added a particular user to ichat, from our internal jabber (ichat) server, the account added fine, however there were no other users in the list.
all other users that I added:
when adding to our internal ichat server, all of the other users showed up.
The difference between the users that had everyone show up and the one that had no other users show up:
all users are part of workgroup "workgroup". The user I added that had no "buddies" in her ichat list, was also part of a 2 other groups "workgroup", "fin", and "acctpay".
So i guess my question is, how can I make the user with no buddies, show all the other users on the ichat server?
thanks!

Purchase transfer issues for Garageband or other inapp purchase

Similar Messages

Maybe you are looking for