Purpose of "with"

Hi Everyone,
i have one small doubt, usually we use to write some sql programs start with, "with" what it means exactly,
what it will do, can i apply with for all of my sql blocks in sql query.
can you please help me on this.
Thanks
sarath.

Hi,
Thanks for the reply, i have one more doubt, in a sql query i have 3 sql blocks with parallel hints so, if i execute the query its not working, if i remove one parallel hint its working fine.
Is there any restriction by using "with", I mean only two parallel hints allowed or more could you please tell me.
Thanks

Similar Messages

General Purpose Signaling with LabVIEW 7

I need LabVIEW 7 to handle the following situation. I have 3 concurrent VI's - A, B and C. A and B want to hear different sets of "signals" from C. Specifically, A wants to hear only signals 2, 4 and 6 while B wants to hear only signals 1, 3 and 5. These sets are arbitrary and NOT known at compile-time. Furthermore, A and B can listen for their signals one or more at a time, service any received signals, and loop to listen for one or more additional signals. Neither A or B want to poll and both must hear all their respective signals regardless of the order they are generated by C and regardless of the order A and B choose to listen for them.
LabVIEW 7 Notifiers almost solve this problem except for the timestamp feature that
prevents notifications from being received out of order. For example, if C sends notifier 1 to B while B is waiting on notifier 3, and then C sends notifier 3, notifier 1 will NEVER be heard by B (unless, of course, B has a Wait on Notification icon on his diagram for each possible notification he is to receive).
User defined events look very promising for solving this problem but I am not sure how to get the event structure to hear different sets of events (not known until run-time) at different times. For example, A may first want to listen for signals 2 and 4, say with a timeout, and then listen for signals 4 and 6.
Any insights into solving this problem would be appreciated.
W. Brown

Attached is a workaround that answers this problem.
W. Brown
Attachments:
Notifier_Problem.llb ‏91 KB

Special Purpose ledger integration with COPA

Dear all,
Please help me to understand the config tasks for integration of Special Purpose ledger with COPA. Explain in detail what are different setting to be maintained.
Thanks,
Mary.

Hi,
now i am send it special purpose ledger configuration steps you can follow that your problem will be solued.
Special purpose ledger
Steps for cofig.
- Define Table Group
Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Tables -> Definition -> Define Table Group (T.CODE:GCIN)
- Maintain Field Movement
T.CODE:GCF2
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Master Data -> Maintain Field Movements
- Maintain Ledger for statutory ledger
T.CODE:GCL2
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Master Data -> Maintain Ledgers -> Copy Ledger
Assign Co Code
Assign Activities
- Define Versions
GCW1
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Periodic Processing -> Currency Translation -> Define Versions
- Set Up Exchange Rate Type
OC47
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger ® Periodic Processing -> Currency Translation -> Set Up Exchange Rate Type
- Create Number ranges
GC04
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Number Ranges -> Maintain Local Number Ranges
- Create Currency Translation document type
GCBX
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Maintain Valid Document Type
- Create Posting period variant
GCP1
IMG Menu Path :
Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Posting Period -> Maintain Local Posting Period
Don't forget abt reward points
Regards
gvr

Trouble with Creative Mediasource

I'm using the latest driver (2.0.00) And Firmware (2.0.03), and CMS5 5.0.38, with the plugins for Zen and the PlaysForSure. My system us Windows XP, SP2, and I meet the minimum system reqs for the program.
Since "upgrading" to Creative MEdiasource 5, I've run into several problems, perhaps all interconnected.
--Mediasource takes an incredibly long time to load my Zen (40 GB Zen Xtra), upwards of 3 minutes. This took only a few seconds in previous versions. This is present when connected through my front, back and USB hub ports.
--Mediasource will rip a CD incredibly slowly. If I try to transfer more than one CD (That is, one, the procedure ends, and then start up another), I will get an error message and MEdiacsource will shut down.
--Sometimes, the window itself will disappear, and I will be unable to access it. This has happened a couple of times instead of the previous problem. The process will still run, but I will be unable to reload it, and trying to forcibly end the process (Task Manager) seems not to work. This also happens sometimes when I browse away from my Zen (Say, to a CD or file on my computer), and come back to my Zen.
I tried using my prior version, but it doesn't recognise my Playsforsure device at present, and I'm not sure if it's even possible to alter it.
Is anyone else having a similar problem? I loved Mediasource prior to this version: It was a sleek, easy and intuiti've interface and covered almost all of my Organisation needs. I did check the boards, but I may have missed a similar problem. I'm wondering if this is an issue that people have a solution to.
Any help's appreciated.

Hello:
I have formatted the player using the recovery menu as well as with WMP, because both are the recommended and "only" ways to format, depending on who you listen to. No difference, however in the way WMP behaves. When I get to the point where WMP can only sync a small few files, if I do a Cleanup (from rescue mode), let the Nomad rebuild the library, I can usually get more files in before it clogs up again. Every time I do a fresh format, I lose a couple of days worth of work, so I'm not doing it again.
I don't have any way to control how much of the library to synchronize once it has gotten past my playlists, unless I spend time creating more playlists for this purpose. With a 60 G Nomad, and a library suitable for that storage, that's a TON of music to deal with.
I'm still trying to figure out whether this is a Windows Media Player issue, a driver issue, or a Nomad firmware issue. Since I have to reset the Nomad between each sync attempt, and occasionally do a cleanup, I'm guessing it's the Nomad, and since I've seen it on more than one unit, I'm guessing it's a firmware bug.
I'm hoping someone else has seen this issue and has a better idea. I hate all my choices: Notmad is frustrating because I can't get my playlists to come across. Creative Media Source is less reliable than WMP, so that leaves WMP as the least aggravating way to sync, and it works flawlessly with my smaller sized Sansa Clip from the same library.
Dan

Ios8 photos with edit and lte

Hello, sorry to ask but I have 3 questions. In order of importance.
My Phone is Iphone 5S
1. I updated my phone to iOS 8.02, which deleted all of my photos from the phone. it was not synced, it updated while disconnected. Restoring from a back up file before update didnt change anything (it had me go through initial setting after update again, and photos were missing. I updated 10/13 and back up file was from 10/12). I pulled the photos out to a separate folder, so I have recovered 2000 photos.
Problem is that these photos have lost all of the edits, which I have most of my photos cropped.
photo tab which lists all the photos ive taken since 2005 have those edits in but i can only move about 6 at a time so this is troubling.
Q: Is there a way to restore photos back in to an album with an edits?
Thank you.
2. Since iOS7 my phone would loose reception in schools and streets etc. I would understand high mountain forested area but in middle of the street in city (near bus stop etc) loosing an entire connection where my phone call would stop until I travel quite a distance is weird. LTE and 4G both loose connection in random locations and it is very slow. (It takes about an hour to load a 30 min video. through safari.) However youtube is perfectly fast and smooth. (But can't use HD cuz its not wifi.) If I access youtube through a web for HD, it is slow as mentioned above. Loading images from deviant art or tumblr(in app) takes 30-60 sec per image as well. Sometimes they fail to show up which I have to refresh the page, or they show up in low res, where I can see chunk of pixels and can't read. Thankfully sometimes when I zoom in the image gets rendered to higher res, but its so far random luck.
Q: Is LTE and 4G supposed to be so slow that loading an image online takes 30-60 sec or is my phone broken?
3. When I updated to iOS7, my song library was wiped so my songs which were listed in order is now alphabetical order which itunes have done it without permission. iOS8 have done this with a photo.
Q: Is there something that window user needs to fix in setting to prevent a data loss?
Thank you for your time.

Ian
iPhoto always works on a copy of the file. It does this as a failsafe, allowing you to use the Photos -> Revert To Original command, should you find you've gone too far in an edit.
When you edit a pic in iPhoto, or via iPhoto with another editor, iPhoto shows you the altered pic, and to all intents and purposes works with the altered pic in the future, inless you use the Revert command.
So, unless you choose otherwise if you email, share, export a pic, it will be the edited version that is used.
Hope this is clear, if not, write back and we can try clarify more.
Regards
TD

Can I download my sons apple id purchases onto my iphone with a different id from icloud?

my son has an ipod touch with a different apple id. all of his songs are in icloud. can I transfer them to my iphone via the pc?

04sporty wrote:
My wife has just received an iphone for use from her employer for work purposes only with a new apple id pertaining to her job. I bought her an ipad mini for Christmas and would like to know if she can set up the ipad for personal use with a different apple id unrelated to her work phone.
Did you get her an LTE mini?

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Encoding 320 kpbs vbr = 320? what's wrong with this picture

Hi,
I notice something peculiar about encoding with iTunes at 320 kbps vbr.
When getting info in iTunes on the converted mp3 file, it shows as 320 kbps. What’s peculiar about this is, setting the bit rate to 320 means 320 is the highest possible rate - when needed. The more silent parts of the audio file are going to be less; therefore I should be getting an average number, say 276. This occured with a batch of different songs, so it's not the audio files.
As a test, I also use BarbaBatch and do not have this problem. I encoded at 320, and ended up with 276.
Is there a utility to do an analysis on the existing 320 files to determine what the actual encoding is? Perhaps iTunes doesn't correctly display the actual bit rate, but rather what my custom setting was. That would be consistent with itunes get info not even showing VBR in the get info window too.
Thanks,
Jeff
G4, 1.4 GHZ, Mac OS X (10.3.9)

Hi NoName,
Thanks again. Okay, I looked at the properties and it’s the same as the status bar, 320 k. I appreciate your continued insight and effort and will have to defer trying to figure this out. Only because in the past month I went ahead and migrated much of my CD library onto disk using the iTunes custom settings.
I was decisive about using VBR, rather then CBR, for compatibility reasons. BarbaBatch, if you’re not already aware has a robust conversion set offering both VBR and CBR. My decision was based on using 320 because it sounds warmer to me then 192 or 256 at times.
I also decided to use iTunes for workflow purposes. With iTunes, all I have to do is insert the CD and wait for it to Eject. Not bad for ripping 200 CDs to disc. Knowing there are actually better converters out there, well they don’t ‘get track names’ and compile everything into organized folders, and eject the CD, like iTunes. So it was a workflow over quality conversion, which I’m still happy with. Contrary to common concerns, I’m not the least bit concerned about disc space. I would just purchase another Drive!. Also, I used VBR knowing it creates smaller file sizes and found anomalies when not using VBR on 320. At times I would get a compressed sound without VBR. So it worked to some advantage. I realize this is the point in our thread where things become subjective too. If I had a couple of terabyte discs, and was picky enough, I’d keep the audio files in their native 16 bit format.
Back to the original concern, I’m just wondering if what I’m experiencing is normal, and it’s all about how iTunes creates tags. They’re just too general, not showing me what the ‘actual’ bit rate is.
Thanks and good luck with your work over there. It’s sounds like we are both Mac and PC’s users, so your recommendation about foobar is helpful and when I get more time I’ll obtain some of the other plugins that might be helpful in analyzing the files.
Jeff
G4, 1.4 GHZ, Mac OS X (10.3.9)

Using Business Area and Profit Center Accounting with New GL functionality

Hello,
We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
-     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
-     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you

Hi Sachin,
Thank you for the reply, we want to know that
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
-     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
-     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you
Tipu Khan

"North America General Purpose 2"-color setting back on every start : PS CS5, Win 8.1 HELP

Hi,
have a problem with my Photoshop CS5 Color Settings on Windows 8.1. Maybe there's already a thread but haven't found.
If I close and reopen PS my color settings are gone and back on "North America General Purpose 2" with sRGB. Have to change every time I open PS doesn't matter if I'm admin or user. Why doesn't PS leave my settings as the default the next time it opens?
Any ideas? Cause this is very annoying ...

Could be a problem with the Color Settings. Open it up and press the Alt key. The Cancel button will change to Reset. Click on that and it should place it to default. The Custom settings should hold.
If not, you can use the Save button, give your Custom setting a name, add some notes and Save it.
Gene

Site made with iWeb using personal domain name

I have created a web site on iWeb 08 and have a personal domain name through Network Solutions.
The website was published to Mobile Me after "set up personal domain" was done. The C Name record was changed at Network Solutions to web.me.com. When I write the domain name in the browser a box comes down asking "idisk.mac.com" wants user name and password.
1. Why is it asking for this?
2. every ID and Password I put in, it tells me is incorrect? Ahhhhhhhh What does it want from me?
Please help - I've waisted so much time on this (since last week).
The website name is www.theplazarealty.com is you want to take a look.
Thank you

This relates to a problem I can't find in the iWeb manual. Where is my iWeb site actually published to, so I can accurately update it using FTP software, and which method to use for publishing it to domain names?
I have created two websites for two different purposes each with a personal domain (one hosted, the other with webforwarding), and through ignorance have done all three options Publish to MobileMe / Publish All to MobileMe / and Publish to a folder (my home computer user Sites folder). As a result I have three Sites folders each containing both 'mysites'- Computer/user/Sites/sitename, or iDisk/user/Sites/sitename, or iDisk/user/Web/Sites/sitename - all different sizes, worryingly, leaving me unclear which is doing what. What is the diff between Publish All to MMe and Publish to MMe - they both seem to entail both sites totally republishing even if only one page has changed. Each time, of course, it takes several minutes or more to clear through the publishing process, and then some 20-30mins more to synchronise with FTP before I find out whether I've only used the duff old version after all. What is the difference between the three Sites destination folders? Can the difference be used productively? Should I, eg, ensure my sites exist both on my computer and iDisk as backup?
Further confusing factor is that when I log into MMe and look at my folders icon on my iDisk, which are Sites and Web/Sites, the contents of the two 'mysites' folders listed under both areas are different from the SITES/iWeb display listed below them, which seems to be a truncated sort of merger of the 'mysites' contents without their separation into two. Is that iWeb item under SITES on the folders page listing a fourth set of the contents,or what?
Now to synchronising/updating: which Sites folder to use to synchronise the websites with. Can I get updating in sync with republishing? My domain host UKcentric does not provide the CNAME options you have all talked about and they are unobtainable on my hosted domain page. I sent him the web.me.com message as described in the iWeb Personal Domain instrux, but he has persistently instructed me to use FTP software to upload and update the sites. He is not Mac-friendly, he admits. I have now used three programs, ClassicFTP, FileZilla and Cyberduck, all of which seem to be rather different and none of them has told me the sync has completed (the connection drops out, etc - it does take a long time, say 30-40mins to do, and I never know when I "resume" whether it'll pick up where it was or go back to zero start). If I am stuck with this laborious method of regular manual updating, I want to know I am using the correct Sites folder to synchronise the website with. None of this is clarified in the iWeb manual. Can anyone help?

Using Special purpose ledger for CIN

We are in the process of SAP Roll out for India. For our Company codes in Europe, we are following Calendar year as Fiscal year where as, as per Country India requirement, Fiscal year needs to be defined from April - March (V3).
We are planning to use Special purpose ledger with Fiscal year as V3 for Country India reporting. We observe that in several SAP Transaction Fiscal Year is a feild to be entered for executing the transaction.
SAP solution for Excise Duty, Service tax and Tax deduction at source are based on Fiscal year as per standard ledger or Special Purpose ledger?
Kinldy confirm, if we can use SAP CIN Transaction based on Special Purpose Ledger ?
BR - Dwijendra

Hi Dwijendra ,
It depands upon what kind of business your implementing. If it is a manufacturing then we need to have lot
of CIN functionaility from the logistics side. Excise invoice and lot of tax specific.
As such from FI side we need to have the vendor/customer TDS cycle that needs to be run and this is covered by withholding tax functionality for India specific. Which is inherited as part of ECC versions.
If your requirement of implementing is purely for reportiing in march-april then you can try the options with special ledger.
regards
pbb

COMPLTE CYCLE OF NRGP PROCESS WITH EXCISABLE PO

HI
DEAR ALL
Can anybody help me nrgp process
My problem is basically excisable Po order against subcontract
any process when to revere or clear excisable payment against subcontract
process
1 .Create PO with item category as "L" .
2. Issue material to vendor with movement type 541
3. J1iex for excisable (part case of excise)
4. (Migo) Receive the material against the PO with movement type 101.
5. j1iex (post)
6 Miro invoice verification
7 Miro credit memos
i have not understood completly process of nrfp
can anybody tell me complte process of nrgp

Hi,
I missed to mention the process.
the exciseable goods or even the goods that are leaving the premises requires a gate pass. in case of goods that are not coming back NRGP is issued. these are tracked in NRGP registers.
the typical example can be if the material is send from one plant to another and it is not going to come back then, STO will have NRGP slip.
same NRGP slip is issued when the goods are sold/or send to dealers from the manufacturing plant.
for disposal of scrap.
say if excise authorities inspect the vehicle on the way, NRGP servers the purpose along with the bills.
NRGP is menat for tracking goods movement thats it.
Regards
Rajesh

Multilevel routing report (with planned price data)

Hi Experts,
Could any of You pls support me with a basic idea how to build a multilevel routing report?
I am not happy with the existing / standard reports related to routings, I actually need one with all subassemblies and also planned price included from CO.
So I have found out the following way:
1.     I build a report, using standard FM CS_BOM_EXPL_MAT_V2, to get a hierarchical BOM all components,
2.     only select top level and components which has subassemblies
3.     run my own written FM to get routing data for subassemblies (using mapl, plas, plko, plpo, crhd, crco) already created
4.     add planned price data (using CO-tables cssl, cost)
It is rather a by-pass; so does a better / nicer solution could be used for the purpose, possibly with some existing FMs (which I have not found up till now)?
Answers will be appreciated

Well it all depends on what this Z report which you're building should output at the end of it. Also the format in which it should be displayed.
Since there is no info on that in your query or what is the exact issue faced, just putting across some FM/Bapi which might be of interest
For routing you can use -
CARO_ROUTING_READ
Some BAPI's which are relevant for costing:
BAPI_COSTESTIMATE_GETEXPLOSION
BAPI_COSTESTIMATE_GETDETAIL
BAPI_COSTESTIMATE_ITEMIZATION

Tranposrt - Purchase Requisition Release Strategy with Classification

Gurus!
Tell me if I want to Transport the Purchase Requisition release strategy with classification. The Data in each charisteristics in each PR Strategy that I have set in Dev is not getting transported to Quality.
Do I have to enter the data in characteristics again in Quality and the same procedure I have to apply for Production.
If yes, in this scenario, Can I make Production modifiable.
Regards
Sajid

Hello,
Create a special ID in PRD with access to change characteristics. This ID should be released for specific purposes and with approval (project manager/SAP support manager). You can also turn on auditing so that all activites performed are logged which can be used to satify auditors.
Cheers !

Purpose of "with"

Similar Messages

Maybe you are looking for