Push button on pop up screen

Hi all,
for displaying some information to the user i gave one information message.
and now can i give one push button on this pop up screen.
regards,
siri.

HI,
use popup_to_confirm FM
to display just information .... use this FM POPUP_TO_DISPLAY_TEXT with default continue button.
                     CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
                       EXPORTING
                       TITEL              = ' '
                         textline1          = 'Your Information'
                       TEXTLINE2          = ' '
                       START_COLUMN       = 25
                       START_ROW          = 6
Regards
SAB

Similar Messages

How to suppress the Push button in a custom screen

Hi,
   Is there any procedure to suppress a Push button in a custom Screen based on a condition.
For eg: If Material is not initial.
            then display the Continue button.
         else not.
          endif.

Hi,
If the push button is not on the application toolbar, then follow the below procedure...
1. Assign the MODIF-ID for the button in the screen. Assume that MODIF-ID for the button is SC1.
2. In the PBO of the screen add the below code...
IF not MATERIAL is INITIAL.
LOOP AT SCREEN.
   IF SCREEN-GROUP1 = 'SC1'
    SCREEN-OUTPUT = 1.
    SCREEN-ACTIVE = 1.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
   IF SCREEN-GROUP1 = 'SC1'
    SCREEN-OUTPUT = 0.
    SCREEN-ACTIVE = 0.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Vara

Prob with Push Buttons in the selection screen

Hi All,
1) I have 6 push buttons in the selection screen(Normal Report), 3 in a first row(P11, P12, P13) and 3 in the second row(P21, P22, P23). If I press one push button(for ex P11) the other two Push buttons(P12 P13) should grey out(Inactive mode). If I press P22, P21 & P23 shoul grey out.
2) I need color change for the Inactive push buttons.
Thanks
Kris

Can you please post your selection screen definition? I don't understand what you want to achieve by greying out the other pushbuttons when one is pressed.
Does that mean pushing one button will do nothing except greying out the buttons?
Typically when you push a button, you want to continue to execute the required processing for that button not just grey out other pushbuttons and stay in the selection screen.
Anyway, you can achieve that using the following logic. I am not sure how and if you can achieve the color change.
TABLES: sscrfields.
DATA: v_button_pushed(5).
SELECTION-SCREEN PUSHBUTTON /1(10) p11 USER-COMMAND push1.
SELECTION-SCREEN PUSHBUTTON 12(10) p12 USER-COMMAND push2.
SELECTION-SCREEN PUSHBUTTON 23(10) p13 USER-COMMAND push3.
SELECTION-SCREEN PUSHBUTTON /1(10) p21 USER-COMMAND push4.
SELECTION-SCREEN PUSHBUTTON 12(10) p22 USER-COMMAND push5.
SELECTION-SCREEN PUSHBUTTON 23(10) p23 USER-COMMAND push6.
INITIALIZATION.
p11 = 'Push11'.
p12 = 'Push12'.
p13 = 'Push13'.
p21 = 'Push21'.
p22 = 'Push22'.
p23 = 'Push23'.
AT SELECTION-SCREEN OUTPUT.
CASE v_button_pushed.
 WHEN 'PUSH1'.
 LOOP AT SCREEN.
 CHECK screen-name <> 'P11'.
 screen-input = 0.
 MODIFY SCREEN.
 ENDLOOP.
 WHEN 'PUSH2'.
 WHEN 'PUSH3'.
 WHEN 'PUSH4'.
 WHEN 'PUSH5'.
 WHEN 'PUSH6'.
 WHEN OTHERS.
ENDCASE.
AT SELECTION-SCREEN.
v_button_pushed = sscrfields-ucomm.

How to add push buttons in out put screen of ALV

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

Hi Kiran,
Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = v_repid
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 i_structure_name = 'QMEL'
TABLES
 t_outtab = i_qmel
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'TEST'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
 selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
 WHEN 'BUTTON'. "Double Click line Item
 call transaction 'MM01'.
endcase.
endform.

Problem With Push buttons on the selection screen

Hi All,
I've taken 3 push buttons on the selection-screen with the following syntax
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2,
                  FUNCTION KEY 3.
and have removed the F8 execute button using FM RS_SET_SELSCREEN_STATUS
Now, the problem is i'm able to perform validations using At selection screen but the code after the Start-of-selection is not being triggered.
I mean the processing is being terminated after the at selection-screen.could anyone please tell me how do i trigger some code after the event start-of-selection when a user presses a push button with sy-ucomm = FC01.

Check the below sample program :
REPORT ZLPRWINSPC_TMP .
tables : mara,
         sscrfields.
select-options s_matnr for mara-matnr.
initialization.
sscrfields-functxt_01 = 'Clear Selection'.
selection-screen function key 1.
AT SELECTION-SCREEN.
case sscrfields-ucomm.
when 'Clear Selection' or 'FC01'.
clear s_matnr.
refresh s_matnr.
endcase.
Thanks
Seshu

Customer Push Button on Process Bid screen

Hi Expert.
I need to add a new customer Push Button on "Proces Bid screen" .There are any BADI or user exit which
I can use for addition the new button.
waiting your suggestion.
Sayan.

hi,
Please let me know if you have a solution for this thread.
Regards,
Neelima

Push button in the selection screen

Hi folks,
          I need to display a push button the selection screen.its not on the application tool bar..but in one of the selection block in the selection screen..could anybody guide how to do this...
           Thanks in advance,
           shyam.
Edited by: shyam prasad on Jan 15, 2009 7:34 AM

Hi Shyam,
Try the following code..
TABLES sscrfields.
TYPE-POOLS icon.
*SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE title,
    PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
    PUSHBUTTON 28(30) but2 USER-COMMAND cli2
                           VISIBLE LENGTH 10.
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE sscrfields.
    WHEN 'CLI1'.
    WHEN 'CLI2'.
ENDCASE.
START-OF-SELECTION.
title = 'Push button'.
but1 = 'Button 1'.
CALL FUNCTION 'ICON_CREATE'
    EXPORTING
      name   = icon_information
      text   = 'Button 2'
      info   = 'My Quickinfo'
    IMPORTING
      RESULT = but2
   EXCEPTIONS
     OTHERS = 0.
Hope it will be useful..
Regards,
Lakshman.
Edited by: Lakshman N on Jan 15, 2009 7:39 AM

Push Button Problem in Custom screen

Hi All..
Hi All..
In my custom screen, i have 2 (A1, A2) input boxes with F4 option and a Push Button..
When i select the data in these input boxes, i will click Push Button (COPY) to transfer the data from these (A1, A2) to other two input Boxes (B1, B2)..
But data are displaying in (B1, B2), if and only if i click the Push Button 2 times..
How to make the code to display those data from A1-A2 to B1-B2 by Single click..???

In PAI, I have coded the lines as follow..
Still i need to click 2 times to get the data displayed in B1,B2..
****PAI*****
when 'COPY'.
select bezei from tka01 into (it_sap-name) where kokrs = A1.
endselect.
select msehi from tka03 into (it_sap-unit_of_meas)
where kokrs = A2 and STAGR = A1.
endselect.
B1 = it_sap-name.
B2 = it_sap-unit_of_meas.

How to ijntroduce PUSH Button in KD_GET_FILENAME_ON_F4

Dear Experts,
I am new to ABAP.
I know how to use push button in Sel-Screen. But my requirement is:
1)How can I use a push button in "KD_GET_FILENAME_ON_F4" so that on hitting the push button a PopUp screen appears.
2) This Pop up screen should be a file directory screen from which I can select a file.
3) This file on one click should get considered as "file_name" of the call function "KD_GET_FILENAME_ON_F4."
Looking forward for advise from experts.
Regards
Chandan Kumar

Dear Mr Klaus,
Thanks for your reply. The method suggested by you will definitely help the user to directly open a file dialogue box. But I want the code to make it more simpler for the user. After I execute the code The use should get a Push Button. On hitting this push button a POP UP screen should appear. This pop up screen should lear us to the target folder.
In your suggestion it was possible to open a folder path pop up screen. just I want to intriduce a PUSH button there. Also I want multi selection to be possible. In your suggestion above when I wrote the code as:
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
 lw_file LIKE LINE OF it_tab,
 gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
*F4 input file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
READ TABLE it_tab INTO lw_file INDEX 1.
p_file = lw_file-FILENAME.
Start-of-Selection.
file_str1 = P_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 filename = file_str1
* filename = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
tables
 data_tab = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the above code when I use Multiselection = 'X' then in the folder pop up multiselection is possible but the multiselection deosn't
gets selected for upload.
Looking forward for your suggestions.
That is my requirement.
Regards,
Chandan

I want push button on output screen

Hi friends,
 I want push button on toolbar output screen. After choosing this push button it will display one screen it having data below like this.
 .Division channel
 .Division
 .Sales organization
 .Sales Document
 .Sales Document Type
 .Sales Group
 .Sales office
 .Month
Plz help me

hi sreerama,
to have a push button in ur report, u have to create a GUI status with command.
u can create gui status using command SET PF-STATUS 'XXXX'.
Create a button in GUI status, assign the function code for that button. Example FCODE.
After creating GUI status, u have to use AT USER-COMMAND event for button of GUI status in report program.
Then in ur report program, write like this.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'FCODE'.
........................... " Your Logic to display what ever u want
ENDCASE.
sy-ucomm catches all the function codes of the system.
For further reference, check these links.
To create GUI status:
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801d43454211d189710000e8322d00/frameset.htm
For List Events:
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba3ae35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba2c435c111d1829f0000e829fbfe/frameset.htm
<REMOVED BY MODERATOR>
Harimanjesh AN
Message was edited by:
 Alvaro Tejada Galindo

Display output list by pressing a push button on selection screen.

Hi All,
Is there any possibility of displaying the output list by pressing a push button on the selection screen.
Thanks,
Neslin.

Hi,
Just write the code like this
Case sy-ucomm.
when 'PRE'.
Here write the output list
" leave to list-processing. Write this statement
endcase.
Regards
Sarves

Edit a selected row in an alv report after pressing a push button ?

hi all ,
I want to edit a selected row in an alv report but that too after i press a push button . After pressing the push button , a pop up shud *** showing all the entries of the selected row which shud be editable and after editing it shud be saved into the database table.
How can i do this please help asap ???

May this prog. of mine can solve your requirement.
REPORT z_demo_alv_jg.
TYPE-POOLS *
TYPE-POOLS: slis.
INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
 i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
 w_field TYPE slis_fieldcat_alv,
 p_table LIKE dd02l-tabname,
 dy_table TYPE REF TO data,
 dy_tab TYPE REF TO data,
 dy_line TYPE REF TO data.
FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa> TYPE ANY,
 <dyn_field> TYPE ANY,
 <dyn_tab_temp> TYPE STANDARD TABLE.
SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
 lines(5) TYPE n.
START-OF-SELECTION *
START-OF-SELECTION.
Storing table name
p_table = tabname.
Create internal table dynamically with the stucture of table name
entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
 MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
 LEAVE TO LIST-PROCESSING.
ENDIF.
Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_structure_name = p_table
 i_callback_user_command = 'USER_COMMAND'
 i_callback_pf_status_set = 'SET_PF_STATUS'
 TABLES
 t_outtab = <dyn_table>
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
 Setting custom PF-Status
 -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'Z_STANDARD'.
ENDFORM. "SET_PF_STATUS
*& Form user_command
 Handling custom function codes
 -->R_UCOMM Function code value
 -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
Local data declaration
DATA: li_tab TYPE REF TO data,
 l_line TYPE REF TO data.
Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
 <l_wa> TYPE ANY.
Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
When a record is selected
 WHEN '&IC1'.
 Read the selected record
 READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
 rs_selfield-tabindex.
 IF sy-subrc = 0.
 Store the record in an internal table
 APPEND <dyn_wa> TO <l_tab>.
 Fetch the field catalog info
 CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 i_program_name = 'Z_DEMO_PDF_JG'
 i_structure_name = p_table
 CHANGING
 ct_fieldcat = i_fieldcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
 IF sy-subrc = 0.
 Make all the fields input enabled except key fields
 w_field-input = 'X'.
 MODIFY i_fieldcat FROM w_field TRANSPORTING input
 WHERE key IS INITIAL.
 ENDIF.
 Display the record for editing purpose
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_structure_name = p_table
 it_fieldcat = i_fieldcat
 i_screen_start_column = 10
 i_screen_start_line = 15
 i_screen_end_column = 200
 i_screen_end_line = 20
 TABLES
 t_outtab = <l_tab>
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc = 0.
 Read the modified data
 READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
 If the record is changed then track its index no.
 and populate it in an internal table for future
 action
 IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
 <dyn_wa> = <l_wa>.
 i_index = rs_selfield-tabindex.
 APPEND i_index.
 ENDIF.
 ENDIF.
 ENDIF.
When save button is pressed
 WHEN 'SAVE'.
 Sort the index table
 SORT i_index.
 Delete all duplicate records
 DELETE ADJACENT DUPLICATES FROM i_index.
 LOOP AT i_index.
 Find out the changes in the internal table
 and populate these changes in another internal table
 READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
 IF sy-subrc = 0.
 APPEND <dyn_wa> TO <dyn_tab_temp>.
 ENDIF.
 ENDLOOP.
 Lock the table
 CALL FUNCTION 'ENQUEUE_E_TABLE'
 EXPORTING
 mode_rstable = 'E'
 tabname = p_table
 EXCEPTIONS
 foreign_lock = 1
 system_failure = 2
 OTHERS = 3.
 IF sy-subrc = 0.
 Modify the database table with these changes
 MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
 REFRESH <dyn_tab_temp>.
 Unlock the table
 CALL FUNCTION 'DEQUEUE_E_TABLE'
 EXPORTING
 mode_rstable = 'E'
 tabname = p_table.
 ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command
Regards,
Joy.

Push button and Popup

Hi All,
I have an ALV output. Now i have to put a push button on the application toolbar of this output and when i click on the button have to display a pop up. in that pop up i need to put 4 parameters , 3 check boxes and two push buttons.
Can anybody help me in this regard. It will be helpful to me if anybody have a piece of code for my requirement. or else suggest me how to full fill this requirement.
Thanks in advance.
Regards
g.s.naidu

hi
check this thread
Re: How to add push buttons in out put screen of ALV
hope it helps
regards
Aakash Banga

How to generage pop up screen on selection screen of report program?

Hi Guys,
 I am having a requirement to generate the pop up screen on the selection screen of the report program.
 Suggest me the best one with model program

Hi Chakradhar,
 Refer this code :
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
SELECTION-SCREEN END OF BLOCK BL2.
AT SELECTION-SCREEN OUTPUT.
CALL SCREEN 100.
when user will click on this radio button , a pop up screen will appear dynamically.
Reward points if helpful.
Regards,
Hemant

Need to add push botton in my selection screen

Hi
I am doing a report program . I need to add PUSH BUTTON in my selection screen can u give me any code or suggestions for this.
IF i press this push button i should get the basic list.
Regards
Rasheed.

Hi Here is a another example.
U can place a Push button on selection screen by using the satatement..
SELECTION-SCREEN PUSHBUTTON 2(10) butt USER-COMMAND cli3.
The push button will start from second character position on Selection screen and of length 10 characters !!
check this program...
TABLES sscrfields.
DATA flag(1) TYPE c.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE tit,
BEGIN OF LINE,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 12(10) text-020 USER-COMMAND cli2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) but3 USER-COMMAND cli3,
PUSHBUTTON 12(10) text-040 USER-COMMAND cli4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
MESSAGE i888(sabapdocu) WITH text-001 sscrfields-ucomm.
CASE sscrfields-ucomm.
WHEN 'CLI1'.
flag = '1'.
WHEN 'CLI2'.
flag = '2'.
WHEN 'CLI3'.
flag = '3'.
WHEN 'CLI4'.
flag = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
Reward me if its helpful.
Regards
Ravi

Push button on pop up screen

Similar Messages

Maybe you are looking for