Push function is not working
Hi
The Mail push function is not working properly. Sometimes it works for a couple of day, sometimes it is not working anymore. Do anybody know a solution for this?
Thanks,
Make sure you have ticked the Tap to Click option under Trackpad in your System Preferences. There you can also choose how right-clicking should work (default is click, actually push down on, Bottom Right Corner of the Trackpad I think).
Did that answer your question?
Similar Messages
-
The download function is not working....!! I don't use any add-ons like idm or dap,etc.... When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads... I am currently using Firefox 7.0.1....... Nothing is being downloaded, and I am forced to use IE8 for everything... I even tried re-installing, but doesn't help... I am using Windows 7
TonyE is correct the plugin version comes with Adobe's Reader X.
The failure in communication is two parted:
1. Reader X is not Acrobat (Mozilla Plugin Checker)
2. Acrobat is not mentioned in the Reader X download Page (Adobe)
therefore confused clients.
For readers '''CAUTION''' check the minimum requirements for Reader X.
Here: [http://www.adobe.com/products/reader/tech-specs.html Adobe's Reader X requirements link]
Do not waste the time to download (80+MB and Site is Slow) if your machine does not have the resources to execute it. ie. '''aging''' Hardware
Unfortunately the Adobe DLM only checks the requirements after it has
downloaded BEFORE the install occurs.
This is '''very expensive''' for both the sender and receiver
It might be why they called it READER X and READER 9 will not sense an update...
Another Software company pushing Hardware antiquity... -
'Create' Push button is not working in BDC and LSMW while uploading G/L master data
Hello Experts:
I am facing the following problem:
While uploading G/L master data with the BDC program, 'create' push button is not working even after executing following lines.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ACC_CRE'.
Create G/L account screen is not coming in BDC. Please suggest me what to do.
Thanks !!Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
Hi Glen Anthony
Thank you for the reply Glen Anthony please take a look at the following code.
REPORT ZFI_BDC_FS00
NO STANDARD PAGE HEADING LINE-SIZE 255.
*INCLUDE BDCRECX1.
TYPES : BEGIN OF STR,
BUKRS TYPE GLACCOUNT_SCREEN_KEY-BUKRS, "Company Code
SAKNR TYPE GLACCOUNT_SCREEN_KEY-SAKNR, "G/L Account Number
KTOKS TYPE GLACCOUNT_SCREEN_COA-KTOKS, "G/L Account Group
XPLACCT TYPE GLACCOUNT_SCREEN_COA-XPLACCT, "P&L statement account
XBILK TYPE GLACCOUNT_SCREEN_COA-XBILK, "Indicator: Account is a balance sheet account?
TXT20_ML TYPE GLACCOUNT_SCREEN_COA-TXT20_ML, "G/L account short text
TXT50_ML TYPE GLACCOUNT_SCREEN_COA-TXT50_ML, "G/L account short text
WAERS TYPE GLACCOUNT_SCREEN_CCODE-WAERS, "Account currency
XSALH TYPE GLACCOUNT_SCREEN_CCODE-XSALH, "Indicator: Only Manage Balances in Local Currency
MWSKZ TYPE GLACCOUNT_SCREEN_CCODE-MWSKZ, "Tax Category in Account Master Record
XMWNO TYPE GLACCOUNT_SCREEN_CCODE-XMWNO, "Indicator: Tax code is not a required field
MITKZ TYPE GLACCOUNT_SCREEN_CCODE-MITKZ, "Account is reconciliation account
XOPVW TYPE GLACCOUNT_SCREEN_CCODE-XOPVW, "Indicator: Open item management?
XKRES TYPE GLACCOUNT_SCREEN_CCODE-XKRES, "Indicator: Can Line Items Be Displayed by Account?
ZUAWA TYPE GLACCOUNT_SCREEN_CCODE-ZUAWA, "Key for sorting according to assignment numbers
FSTAG TYPE GLACCOUNT_SCREEN_CCODE-FSTAG, "Field status group
XINTB TYPE GLACCOUNT_SCREEN_CCODE-XINTB, "Indicator: Is account only posted to automatically?
END OF STR.
DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
IT_BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE,
TXT(4096) TYPE C OCCURS 0,
MSG TYPE STRING,
COUNT(5) TYPE N.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : MY_FILE TYPE RLGRAP-FILENAME.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MY_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
* FIELD_NAME = ' '
IMPORTING
FILE_NAME = MY_FILE
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* I_LINE_HEADER =
I_TAB_RAW_DATA = TXT
I_FILENAME = MY_FILE
TABLES
I_TAB_CONVERTED_DATA = ITAB[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* IMPLEMENT SUITABLE ERROR HANDLING HERE
ENDIF.
START-OF-SELECTION.
COUNT = 0.
LOOP AT ITAB.
*PERFORM OPEN_GROUP.
REFRESH IT_BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_KEY-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ACC_CRE'.
*PERFORM BDC_FIELD USING 'BDC_CURSOR'
* 'GLACCOUNT_SCREEN_KEY-BUKRS'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_KEY-SAKNR'
ITAB-SAKNR. "'5'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_KEY-BUKRS'
ITAB-BUKRS. "'TATA'.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=2102_GROUP'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-KTOKS'
ITAB-KTOKS. "'GL'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
ITAB-XPLACCT. "'X'.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=2102_BS_PL'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-XBILK'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-KTOKS'
ITAB-KTOKS. "'GL'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
ITAB-XPLACCT. "''.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-XBILK'
ITAB-XBILK. "'X'.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-KTOKS'
ITAB-KTOKS. "'GL'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-XBILK'
ITAB-XBILK. "'X'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-TXT50_ML'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
ITAB-TXT20_ML. "'G/L ACCOUNT'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
ITAB-TXT50_ML. "'G/L ACCOUNT'.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
ITAB-WAERS. "'INR'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-XSALH'
ITAB-XSALH. "'X'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
ITAB-MWSKZ. "'*'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-XMWNO'
ITAB-XMWNO. "'X'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
ITAB-MITKZ. "''.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-ZUAWA'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
ITAB-XOPVW. "'X'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
ITAB-XKRES. "'X'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
ITAB-ZUAWA. "'1'.
PERFORM BDC_DYNPRO USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SAVE'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-XINTB'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
ITAB-FSTAG. "'G019'.
PERFORM BDC_FIELD USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
ITAB-XINTB. "'X'.
*PERFORM BDC_TRANSACTION USING 'FS00'.
CALL TRANSACTION 'FS00' USING IT_BDCDATA MODE 'E' UPDATE 'S'.
COUNT = COUNT + 1.
*PERFORM CLOSE_GROUP.
ENDLOOP.
CONCATENATE COUNT ' RECORDS UPDATED SUCCESSFULLY' INTO MSG.
MESSAGE MSG TYPE 'I'.
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
* INSERT FIELD *
FORM BDC_FIELD USING FNAM FVAL.
* IF FVAL <> NODATA.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
* ENDIF.
ENDFORM. -
9iAS java functions are not working
Dear All.
Im using oracle 9iAS Release 9.2.0.1.0 and JServer Release 9.2.0.1.0. Im using java functions (eg. Array, pop, push method and trim function) in my JavaScript section.
But these functions are not working. When run the page it work up to that function and stuck. Functions are written properly.
I would be much-appreciated .if you could help me to solve this problem..
Regards,
NishAre you sure you uncommented and changed jvm.include.CLASSPATH=1
in the jvm12.conf when you added your classpath there?
The preferred way to do this would be to create a .war and deploy it instead. Then you can put your beans in the WEB-INF/classes directory and the application wont have conflict problems if you decide to create virtual servers later. -
The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?
You don't swipe but actually press, hold and push up.
-
IOS 6.1.4 - Apple Native Email Client - Push Notification is not working
Hi, I just upgraded to IOS 6.1.4 this morning no issues Upgrade went well.
Now My Email Push Notfication is not working.
1. Bussiness Gmail Account - Configured as Exchange
2. Hotmail Account - Configured as Exchange
Both Account - Push is ON
if some one send email i am not getting it. I have to manually open the Native Email client then i can see.
Restarted the IPhone Twice.
Any one facing similar issue?1. Removed the Email Account and Added again - Problem Presist.
2. Erase All Content - Restored from previous Backup - No Luck
3. Again Erased All Content - Setup as New Phone - Just add Gmail Enterprise Email Account - Not Working.
Surprisingly - Icloud / Hotmail PUSH Notifications works Fine.
I have removed all My Devices from the Google Apps Administrator page and re-requeste for new deivce and then tried all the above still same Issues.
Now what?
Any one experiencing this issue? -
Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..
I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand
-
"Open In.." function is not working
Hi, "Open In.. " function is not working on my iPad since the first time I recieve it..
it once worked twice, and it took a long time to load PDF file, but never worked again
the apps list is there, but when I click the app, nothing happened.
please do help,
thanksTry clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
Also close all apps completely : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Copy Function is Not Working properly In Order Management
Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinnahaisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
9 sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
tv_sec = -4198732
tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul -
Select() function is not working properly in solaris 10.
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
9 sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
tv_sec = -4198732
tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul -
I just got an iphone 4s. Now the search iphone function is not working. When I swipe the start screen, the search box shows up. But when I type what I want to search, there is no action. Please help.
Try this...
You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On... -
Push notifications WhatsApp not work.
Push notifications WhatsApp not work. I only receive them when I open the app. I've checked the settings on iOs and Whatsapp and all is ok. I've also updated to the latest versions. Can you help me?
I actually did, and here is the answer I received:
"When you are sent a message in WhatsApp, but are not online to receive it, WhatsApp will automatically send your message to the Apple Push Notification Service (APNS). This allows an alert containing the message to be displayed, even when WhatsApp is closed or your phone's display is off. Most often, all that is needed to resolve notification issues is to ensure that all notification settings are enabled. Review these FAQ pages for troubleshooting steps:
Notifications Troubleshooting
Connection Troubleshooting
Sending your message to APNS typically takes only a few milliseconds. Once your message is sent to APNS, any delays or failure to deliver the message as a push notification to your device are usually caused by issues with your phone or network connection. Currently, all of our systems are operating normally.
If you are using iOS 7, and are confident that you have all push notification settings enabled in WhatsApp and the iPhone Notification Center, then there is likely an issue with your phone that WhatsApp cannot resolve for you. In this case, I recommend the following steps:
Backup your entire phone to iCloud.
After the backup is complete, Erase all content and settings.
Continue setting up your phone as a new device (do not restore from the iCloud backup).
Install WhatsApp and verify that push notifications are working correctly (have someone send you a few test messages while your phone's display is turned off).
Erase all content and settings and restore from the iCloud backup. "
I tried to delete everything from my iPhone and then restore my data with the backup on my computer but it did not change anything, I still can't receive any notification, unless I open the application... However, I restored immediatly my backup cause I was afraid it wouldn't work after, but I don't really think it would change something to first start as a new device and then erase all content again and restore it. -
How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?
Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.
-
Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7
I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium. I synchronize with a Palm Tx PDA. HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application. I now find that the address look up function does not work (although it worked fine when I was running Vista). Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall). I would appreciate any help or suggestions to fix?
Post relates to: Palm TXHi,
844869 wrote:
CREATE TABLE TEST_EMPLOYEES
FIRST_NAME VARCHAR2(26 CHAR),
GRADE VARCHAR2(5 CHAR)
INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
William&45 1
Robin 43 1
Raymond 43 1
Richard 43 1
Karen 28 1
Michelle 1
Jonathan 1
Mark 1
Ann 1You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
This is one of the many helpful things found in the forum FAQ {message:id=9360002}
Are the results above what you're getting with some existing query, or are they the results you want?
If those are your current results, post your query. In that case, what are the results you want? Do you want this?FIRST_NAME GRADE RNK
William 45 1
Robin 43 2
Raymond 43 2
Richard 43 2
Karen 28 5
Michelle 6
Jonathan 6
Mark 6
Ann 6
Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
I see you've added the desired results to your original message.
Here's one way to do that:SELECT first_name
, grade
, RANK () OVER (ORDER BY grade NULLS FIRST) AS rnk
FROM test_employees
ORDER BY grade DESC NULLS LAST -
Recently upgraded to a new iMac running 10.9.4. Printing works well from this computer and all other devices (iPad, iPhone, etc.). However, the "scan to computer" function does not work. In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
Of course I have done this... twice... still no luck. Also ran Software Update and there was an update, but it made no difference.Yes, did all that... in order. It did not resolve the problem. However, I did find what appears to be the answer. After re-installing the driver software DO NOT immediately follow the prescribed steps. Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart. Install that software update, and even though the computer and software do not call for it, restart the Mac again. Only then add the printer and follow the balance of the steps. It works! Thank you for your help.
Maybe you are looking for
-
How to insert message in OC4J JMS from standalone java client.
Hi, I have been following available examples for creating standalone java clients to insert messages in JMS queues. I am able to insert using java client when the SOA suite and the standalone java code are on same machine. package producerconsumerinj
-
hi all I AM FACING SIMILAR PROBLEM I.E I CREATED NEW QUERY UNDER ONE CUBE AS PER REQ, AND PREVIOUSLY WHILE I WAS CREATING NEW QUERY IT ASKED FOR NEW REQUEST SO I ASSIGNEd THAT QUERY TO NwE PARTICULAR REQUEST.SO IT WORKED. NOW AGAIN WHEN CREATING NE
-
Saving a CSV report output as TXT file
Hi, We are generating reports on the web using Intenet Explorer. The report is a CSV report, i.e. the data displayed is comma separated. After generating the report, we need to save it as TXT file. If the length of a line is long (let us say more tha
-
I am new to the EBS though I have worked on forms before. We have Apps 12.1.1 and I am working on Forms 10.1.2 I have some custom changes to be made in PO form (POXPOEPO). So I grabbed the FMB and opened it. Without any changes, I tried to re-compile
-
I realize Aperture was designed primarily to archive photos, but how well does it too with videos. I have thousand of video clips. Since I am very familiar with Aperture and just upgraded to Aperture 3, it would be nice if I could use it too manage a