Put the right host and port in notification emails

I just got a email confirming the creation of an APEX workspace, but the URL shown is this:
URL: http://localhost:8080/apex/
Is there a way to tell APEX that it really resides at http://myapexmachine/apex?
Thanks

Hi,
As I understand it take url where you have connected to Apex.
So if you connect from http://myapexmachine/apex then url in email should be same.
When you did create workspace did you connect using http://localhost:8080/apex/ ?
Br, Jari

Similar Messages

HT1420 I can't use the new I pad on I store its asking for job questions which I don't no the answer I put the right answer and its sayin wrong

I bought a new I pad I want to download some movies I am going away tonight and its asking for job security questions at which I put the answers and it says wrong I can't remember what I put years ago what do I do I just bought a $100 I tunes card

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551

BPM Worklist Problem After Setting Frontend Host and Port

Hi all,
I was following the EDG for SOA 11.1.1.5 and was encountering a problem with the BPM Worklist after setting the Frontend Host and Port. We have a topology that includes a load balancer that terminates SSL, two OHS instances, and two SOA instances on separate VMs. When BPM Worklist was loading, it was calling webservices internally through the load balancer, but WebLogic was expecting them as http://. It was not able to resolve the HTTPS port that was being sent from the load balancer through the 80 to 443 redirect.
What the current EDG does not tell you, is that you have to also turn on "Enable Weblogic Plug-In" for WebLogic to use the OHS plug-in. I did it at the domain level, as all traffic will go through the load balancer. This essentially tells WebLogic that all URLs are https://
Here is an exerpt from the SOA.out log file:
<Sep 8, 2011 9:32:06 PM PDT> <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
Caused By: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
What it is also missing, is that you should also set the SOA Infrastructure ServerURL mbean for the load balancer, to match the frontend host and port. Do this through Fusion Middleware Contol. Otherwise, you could encounter URL mismatches.
I hope this helps someone else.
I've asked Oracle to add this to the EDG for SOA. It's in the IDM guide, but not in any other EDGs.

Thanks Josh. It helped me infact in 11.1.1.4 Enable Weblogic Plug-In is not required. But 11.1.1.5 I thing it is mandatory. Oracle should have a clear documentaion.

Change/Configure Host and Port for the Web Service Proxy with Server

Hi,
Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
Scenario:
We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
and Port details.
Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
based on server.
I am a bit new to this web service .. will appreciate if someone could provide an example.
Thanks.

Are you using Web Service Proxy or Web Service Data Control?
If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
Venkat

I can't sign into my iMessage I am putting in the right password and everything but it says thee was an error try again.....???? Can anyone help me.......

I can't sign into my iMessage I am putting in the right password and email address but very time I want to sign in it says
" iMessage Activation
An error occurred Try Again"
This is really frustrating and I need it fixed if you can help me please tell me!!!!
Thanks

Here is a solution that worked for me, after nothing else would. Log out and back in to iTunes on your Mac/PC.
I had exactly the same problems as above, and no amount of network changes or even a full restore would help.
Finally, I went back to my PC, launched iTunes, logged OUT of that, then signed in again, this time with the new password.
Then I had to go back, and properly close Facetime and iMessages and sign in. It worked fine after that.
(To properly close an application, double click the home button, then hold down on the facetime app logo in the multitasking bar at the bottom, then press the tiny symbol.)
Best of luck.

HTTP Proxy: My grogram runs even I put a wrong proxy host and port

I'm new to network programming, so I just use System.setProperty() for easy. But I don't know why this piece of code runs with whatever proxy I set:
(I download a file and display in a in JTextArea, this is the ActionListener for 'Download' button)
     private class GetFileListener implements ActionListener
          public void actionPerformed(ActionEvent event)
               if (completeRadioButton.isSelected())
                   try
                        viewFileTextArea.setText("");
                    System.setProperty("http.proxyHost", "http://123.123.123.123");
                    System.setProperty("http.proxyPort", "123");
                    System.setProperty("proxySet", "true");
                       URL url = new URL(completeURLTextField.getText());
                       BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
                       String str;
                       while ((str = in.readLine()) != null)
                           viewFileTextArea.append(str + "\n");
                       in.close();
                   catch (MalformedURLException e)
                        viewFileTextArea.setText("URL not found!");
                   catch (IOException e)
     }Please help! Thank you very much!

This is the new version:
     private class GetFileListener implements ActionListener
          public void actionPerformed(ActionEvent event)
               if (completeRadioButton.isSelected())
                   try
                        viewFileTextArea.setText("");
                    SocketAddress addr = new InetSocketAddress("123.123.123.123", 123);
                    Proxy proxy = new Proxy(Proxy.Type.HTTP, addr);
                    URL url = new URL(completeURLTextField.getText());
                    URLConnection conn = url.openConnection(proxy);
                       BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
                       String str;
                       while ((str = in.readLine()) != null)
                           viewFileTextArea.append(str + "\n");
                       in.close();
                   catch (MalformedURLException e)
                        viewFileTextArea.setText("URL not found!");
                   catch (IOException e)
     }but it still runs regardless of what proxy host and port I set in InetSocketAddress. Did I wrongly use Proxy class in the code above?

HT4623 Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but i get the message that this cannot be done "unknown error 1604" . What

Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but I get the message that this cannot be done: "unknown error 1604" . What to do now, please?

Thanks, good suggestion, but after trying recommendationsthere I still have the problem of error 1604 happening and no progess.

Error establishing socket to host and port: EPM11:1433

Hi Planning Experts,
I am trying to configure EPM 11.1.2.1 (Planning)
RDBMS: SQL server 2005 (Express Edition)
OS: 2008 R2 x64
i am getting error after providing RDBMS credentials "error establishing socket to host and port: EPM11:1433 Reson: connection refused: connect"
Please help....
Regards
Kumar

You may need to enable tcp/ip
SQL Server Express listens on local named pipes and shared memory. With a default installation, you cannot remotely connect to SQL Server Express. You will need to enable TCP/IP and check if the firewall is enabled.
To enable TCP/IP:
From the Start menu, choose All Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Configuration Manager.
Optionally, you can open Computer Manager by right-clicking My Computer and choosing Manage. In Computer Management, expand Services and Applications, expand SQL Server Configuration Manager.
Expand SQL Server 2005 Network Configuration, and then click Protocols for InstanceName.
In the list of protocols, right-click the protocol you want to enable, and then click Enable.
The icon for the protocol will change to show that the protocol is enabled.
Cheers
John
http://john-goodwin.blogspot.com/

Determining Message Server Host and Port information

Hi,
I am working on the NWDS creating a Java WD application and I was told which Netweaver system I should work on but I was not told the Message Server Host information neither the Port information. I ran transaction SM51 (right click->details)in the Netweaver system but the information it is not working. Even though I can telnet this server port if I go to the J2EE Engine window within the NWDS I do not see the green light. I just see "N/A". I also tried to deploy my application but I keep getting this message: "Cannot determine sdm host (is empty). Please configure your engine/sdm correctly".
Please advice,
Diego.

Hi Diego,
in order to see Message Server Host information and Port information go to SAP J2EE Engine start page: e.g. http://system-name:57100/index.html (use administrator pws).
Then click on System Information, here on the top you can read the Message Server Host and Port.
Hope this help you.
Bye,
Vito

Hi i would like to know why when i put my serial number of lightroom, i have a message who say me this serial is not correct. I m sure i put the right serial

Hi when i put my serial number of Lightroom, i have a message which say it's not correct
i m sure i put the right number

Without posting private information in a public forum, are you sure you have a serial and not a redemption code?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504

My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Host and Port

Hi
WHere can I get the Host and Port no of the PI Server
Thanks
PR

Hi,
In addition to above, Just FYI that in PI 7.1 the Http and J2ee port are same..
The discussion about same can be found [here|Re: Architecture of PI 7.1] and [here|Re: ABAP & Java ports in PI 7.1?]
and to check all the info @ single place:
Login to XI ABAP stack -> Run tcode SXMB_IFR -> Choose Option Administration -> Properties Administration ->All properties
Sachin
Edited by: Sachin Dhingra on Apr 2, 2009 10:01 AM

TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

This user talked to Apple Support personnel and confirms what Larry is suggesting:
crowland1066
Re: book upload fails
Nov 30, 2013 3:02 PM (in response to pablo123)
Just got off the phone with apple support. If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
Happy Holidays

Smtp and pop3 host and port name of gmail server?????

can any body give me smtp and pop3 host and port name of gmail server?????to send a mail......

Just do a new initial context and lookup the datasource, in case you need other info like host name and port you can use MBEans like:
          InitialContext ctx = null;
               // fetch managed server name by accessing the
               // RuntimeServerMBean using the
               // MBeanServer interface
               ctx = new InitialContext();
               MBeanServer server = (MBeanServer) ctx
                         .lookup("java:comp/env/jmx/runtime");
               ObjectName service = new ObjectName(
                         "com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean");
               managedServerName = (String) server.getAttribute(service,
                         "ServerName");

Find portal oracle database host and port

HI ,
We have EP 7.0 sp15 with oracle database,
Is there a way to find the host and port of oracle database programatically

Hello namit,
I'm the same problem, do you solved it ?
Tks,
best regards.

Put the right host and port in notification emails

Similar Messages

Maybe you are looking for