Putting calculation of different Similer Requests in other Request

Hi Experts,
In my Answeres i have more than one similar requests, eg.
1st Request: Col1=A,Col2=100
2nd Request: Col3=B,Col4=200
3rd Request: Col5=C,Col6=300
*4th Request:Col7=D,Col8=col2*col4*
*5th Request:Col9=E,Col10=col2/col4+col8*
Plz let me know how to do calculation of two requests and show that output in other request.
Thanks in advance....
Regards,
Avi

Hi Avi,
cannot get you.
what's your business model about the request? can you use the case when...then... sql in the business layer to get the col8 and col10. and use union the five row?
BinKing

Similar Messages

  • Response status has number of values different from request

    Hi,
    I'm getting the following message when I try to refresh a worksheet from a workbook.
    "Response status has number of values different from request"
    Has anyone encountered this message? what does this mean?
    I'm using SmartView 11.1.2.1.103 on HFM 11.1.2.1.103 environment.
    Thanks in advance,
    Ram

    Try removing external calculations (/$C$1) and see if the error message changes.

  • Apple TV worked until today. Message says unsupported signal check your output device.  I have checked hdmi cable with another device and it's fine. Put on a different tv and same message.  Went out yesterday and bought a new Apple TV and same problem.

    Apple TV worked until today. Message says unsupported signal check your output device.  I have checked hdmi cable with another device and it's fine. Put on a different tv and same message.  Went out yesterday and bought a new Apple TV and same problem.

    Which TV do you have.
    You may wish to try the following:
    Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

  • HT4527 My laptop that currently has my itunes library on it is broken and so I can not access it. Is there a way of getting my whole music library put onto a different laptop?

    My laptop that currently has my itunes library on it is broken and so I can not access it. Is there a way of getting my whole music library put onto a different laptop?

    You can have two separate libraries, just do not put them into the same location on the computer. You could also create a new user on the laptop, you, and then you would start out with a blank iTunes library, then just add yours to that. It would also prevent you and your girlfriend from mixing content up unless you share an Apple ID.

  • Captive Network Assistant checks 249 different airport, hotel and other misc WiFi hotspots adding a good 3 minutes to my startup time.

    Hey there,
    During startup of my MacBook Pro, Captive Network Assistant checks 249 different airport, hotel and other misc. WiFi hotspots. Proabaly adding a good 3 minutes to my startup time. ***? This all started while I was on extended layover at Amsterdam Schiphol Airport.
    I thought Captive Network Assistant was an iOS thing. No iOS devices in my home or office. Here's a portion of the console log during startup.
    2/20/12 4:34:13.000 PM kernel: en1: 802.11d country code set to 'US'.
    2/20/12 4:34:13.000 PM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    2/20/12 4:34:15.000 PM kernel: MacAuthEvent en1   Auth result for: 00:26:0a:ee:8f:b3  MAC AUTH succeeded
    2/20/12 4:34:15.000 PM kernel: wlEvent: en1 en1 Link UP
    2/20/12 4:34:15.000 PM kernel: AirPort: Link Up on en1
    2/20/12 4:34:15.000 PM kernel: en1: BSSID changed to 00:26:0a:ee:8f:b3
    2/20/12 4:34:16.386 PM genatsdb: *GENATSDB* FontObjects generated = 495
    2/20/12 4:34:16.426 PM ntpd: bind(26) AF_INET6 fe80::fa1e:dfff:fed8:2f6d%5#123 flags 0x11 failed: Can't assign requested address
    2/20/12 4:34:16.426 PM ntpd: unable to create socket on en1 (5) for fe80::fa1e:dfff:fed8:2f6d#123
    2/20/12 4:34:23.308 PM configd: network configuration changed.
    2/20/12 4:34:23.425 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
    2/20/12 4:34:23.552 PM UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
    2/20/12 4:34:23.552 PM UserEventAgent:   Estancia La Jolla
    2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.552 PM UserEventAgent:   PatientInternet
    2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.552 PM UserEventAgent:   MONZOON
    2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.553 PM UserEventAgent:   !Blue Peaks Public Wireless*~
    2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.554 PM UserEventAgent:   AIELKHORN
    2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.554 PM UserEventAgent:   Goldies341
    2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.555 PM UserEventAgent:   Royal on the Park Brisbane Pub
    2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.555 PM UserEventAgent:   hcc
    2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.555 PM UserEventAgent:   wireless_yokum
    2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   Picospot
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   bytelynk
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   Lynmar
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   WEBbeams-Argo Tea
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   ETHOSTREAM
    Several hunderd lines of the same omitted..........
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   bigwireless
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   ParkInn-ethostream
    2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.556 PM UserEventAgent:   High Speed Internet
    2/20/12 4:34:23.581 PM UserEventAgent:   OBC_wireless
    2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.581 PM UserEventAgent:   BTOpenzone-CaffeNero
    2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.581 PM UserEventAgent:   Airport View
    2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.581 PM UserEventAgent:   Telefonica
    2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.581 PM UserEventAgent:   Oaks Calypso Public Wireless
    2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.582 PM UserEventAgent:   White Sands Beach Resort
    2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.582 PM UserEventAgent:   public-supsi
    2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.582 PM UserEventAgent:   La Quinta Inn
    2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.582 PM UserEventAgent:   radisson
    2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
    2/20/12 4:34:23.582 PM UserEventAgent: *** process 11 exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    2/20/12 4:34:23.910 PM UserEventAgent: CaptiveUserAgent:doLaunchWebsheet:119 can't run websheet, -43
    2/20/12 4:34:23.926 PM configd: network configuration changed.
    2/20/12 4:34:24.016 PM com.apple.launchd: (com.apple.xprotectupdater[51]) Exited with code: 253
    Looking at the times, I see this only takes a fraction of a second but my startup time is still much much longer than it ever was or should.
    Does anyone have any idea on how to get rid of this? I deleted the Captive Network Assistant.app from my computer but the checking continues. It seems to be a rarely mentioned issue doing a web search, and nothing like this, although  it's referred to in certain articles.
    Really weird.
    Gregg

    I'd take another look at your startup log.
    If you look closely, you'll see that all those log messages occurred in the space of 30 milliseconds - by comparison, a human blink takes about 150 milliseconds.
    So while I don't doubt you're seeing slow startup time, I don't think CaptiveNetworkSupport is the culprit, per se.
    Fortunately, since every startup event is timestamped, it should be easy enough to determine what task is taking the most time.
    As for CNS, it's not just an iOS thing - it's standard in Mac OS X, too. I'm also under the impression (but can't confirm) that it only checks the networks that you've previously connected to, so check System Preferences -> Network -> AirPort -> Advanced -> WiFi and delete any networks you no longer use or expect to connect to.

  • Putting lots of different pictures into different pdf-files together

    hi there,
    my boss gave me a tricky task and I dont know how to solve the problem without some help. It's about putting lots of different pictures into different pdf-files together. May be you have some ideas how to succeed. Please excuse my german-laced english.
    My task is to merge (or put together) about 4-5 pictures into one pdf. the problem: i have 4.000 pictures. the advantage: the pictures that i have to merge are named pretty similar, it looks like:
    ab_pictures 1
    ab_pictures 2
    ab_pictures 3
    ab_pictures 4
    ab_pictures 5
    cd_pictures 1
    cd_pictures 2
    cd_pictures 3
    cd_pictures 4
    ef_pictu...etc.
    i have to merge ab-picuteres 1-5 to one pdf called "ab_pictures 1", cd_pictures to one pdf called "cd_pictures 1"...
    because there are so many picture-groups that i have to merge i was wondering if there is a possibility to automate this task by just telling the programm once what it has to, so it can do it without me sitting next to it, telling it each time what it should do next.
    this would safe me a lot (!) of time. Here at my working place there is adobe acrobat reader 9 running, there is also distiller available (I dont know what this appclication is used for).
    my question: is it possible to "programm" acrobat that i could do such a task automatically? Or do I have to buy other programms (may be a database-programm or something like that) to be able to it?
    thank you very much in advance for your expertise and please excuse my german-laced english.
    regards,
    scoutee1

    Two locations, for Acrobat Scripting, that may be helpful.
    #1. Acrobat Scripting here in the Adobe Forums.
    http://forums.adobe.com/community/acrobat/acrobat_scripting
    #2. Acrobat User Community's JavaScript Forum.
    http://acrobatusers.com/topics/javascript
    edit: above link is to AUC Learning Center content.
    The forum is at:
    http://acrobatusers.com/forums/acrobat-discussions-topic/javascript
    Be well...
    Message was edited by: CtDave

  • Completely different AMF request packets for same remote service call from Flex to PHP using ZendAMF

    I was trying to debug why one of the remote-services in our Flex application was failing randomly. What I found was interesting. Completely different AMF request packets were sent for same remote service call from Flex to PHP.
    When the service call succeeds the AMF request packet looks like the following:
    POST /video/flex/bin-debug/gateway.php HTTP/1.1
    Host: localhost
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
    Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 115
    Cookie: PHPSESSID=j6u30i8uu6c3cvp8f4kipcpf05
    Referer: http://localhost/video/flex/bin-debug/main.swf/[[DYNAMIC]]/5
    Content-type: application/x-amf
    C    ontent-length: 305
    Flex Message (flex.messaging.messages.RemotingMessage)     operation = getMemberFromEvent    clientId = 2F997CD0-7D08-8D09-1A9B-0000422676C8    destination = MembereventService    messageId = B46AB58D-2241-83F0-41E4-9FE745565492    timestamp = 0    timeToLive = 0    body =     [      280    ]    hdr(DSId) = nil
    And when the service fails the AMF request packet looks like this:
    ServiceRequest: getMemberFromEvent; RemoteService; getMemberFromEvent
    (mx.messaging.messages::RemotingMessage)#0
      body = (Array)#1
        [0] 250
      clientId = "1AA4FAAB-AEA5-8109-4B0D-000002B3A9A1"
      destination = "MembereventService"
      headers = (Object)#2
        DSEndpoint = (null)
        DSId = "nil"
      messageId = "2F92E6C0-FE92-A09B-B150-9FE2F28D9738"
      operation = "getMemberFromEvent"
      source = "MembereventService"
      timestamp = 0
      timeToLive = 0
    Also, following is the error message on Flex when the service fails:
    {Fault code=Channel.Call.Failed, Fault string=error, Fault detail=NetConnection.Call.Failed: HTTP: Failed, Destination=MembereventService}
    We are using Swiz as the micro-architecture for Flex development and Zend AMF for remoting between Flex and PHP.
    Any ideas what is wrong here, what is causing Flex to send different request packets for the same service & what I can do to fix it?

    Hi, I know that your post is almost 5 years ago, but have you found the solution to this issue?
    Thanks.

  • Manually putting a message in the request

    Hello,
    How do I put a message in the request (being in the action class), manually , so that the tag <h:messages displays it?
    Thanks, regards,
    Javo

    Got it:
    facesContext.addMessage("mess1", new FacesMessage("Hello World"));

  • Calculated column of a request from Column Selector View.

    hi,
    A user wants to select the calculated column of a request from Column Selector View.
    But he is able to select only those columns which are available in Selection Pane.
    How can he fulfill this request

    Hi,
    Take a column in your request criteria and change the name of the column and forumala to f(x)=qty* amount which is your calculated column and using column selector use this column as your user wish too.
    UPDATED POST
    I dont know how your proceeding,the solution i gave will definately work .Here are the steps
    1)pull a column into the request criteria
    2)rename the name of the column
    3)go to formula in f(x) change according to your requirement for example:- quantity*unitprice
    4) run the report and in results you would see the column.
    5)From compound layout select column selector and see what you want is getting displayed.
    Hope helps you.Award points.
    Cheers,
    KK
    Edited by: Kranthi on Jan 19, 2011 7:23 AM

  • Assigning the object to a Different transport request number.

    Hi all,
    I have assigned a object to a different transport request  number and i now i want to assign it to a new one..can any one tell me some procedure to change it.
    Tnx,
    Joe.

    Hi Joe
    In SE09 tcode click on display icon and enter the transport number in which the object was already assigned and click on display.
    Now delete the object from the task of the main request number.
    Now its ready to lock in some other transport request. Just goto the workbench object, try to save or activate, it will automatically ask for transport request afresh. You can now assign the request at this step.
    Rgds,
    Sripal

  • How do you put calculator on dock

    How do you put calculator on dock so it's there all the time?

    Care to share which OS you are using?
    Calculator has always been pre-installed in my Dock ever since Apple invented the Dock.  The original calculator app is inside the Application folder.  Drag the original app to the Dock.  The original app will move back to the App folder & a duplicate calculator app will be sitting in your Dock.

  • How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

    Hi everyone,  : )
    I am creating a website using FGL in DW CS6, v12.0 build 5808.  I do not have Creative Cloud (do you have to pay to use this service?).
    I have created one layout for my home page.
    I would like to create several more pages, but I want them to use different layouts (as well as different content).
    I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
    I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
    I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
    Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above?  *scared*  ; )
    If anyone can help me with this query I would be very grateful.  Thank you!  : )

    Thanks David.
    I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div.  I'm aware of how to turn visual aids on and off), so it seems broken.  This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited.  Do you know anything about this?  Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention?  Am I doing something wrong?
    I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js.  Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.).  Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files.  Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css.  I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
    Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here.  I think I will make one layout for all pages and go with that.  I have a couple of questions about that though:
    1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs.  If I only fill e.g. 8 divs on one page, will the other ones be sat there empty?  I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
    2. If the amount of content in each div is different, e.g.  let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future).  Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
    Thanks so much for your help!

  • How can I make a link a different color than the other links according to the current page?

    Hello.  I have created a navigation bar.  And I would like to style the links to have the current page link a different color than the other links.  For example, if all of the links have a black background, I would like to have the current page link to have a white background.  The reason that I would like to style them this way is so that the visitor knows what page is being visitied.
    I tried different ways but all of them did not show to make any change to the links.  This is what I have so far.  The links work, but all of them have the same color and background.  When on the home page, I would like to have the home page link to have a white background with black letters.  I would appreciate your advice.
    <head>
    ul {
        list-style-type: none;
        text-align: right;
        padding-top: 10px;
        padding-bottom: 6px;
        padding-right: 10px;
    li {
        display: inline;
    a:link {
        color: #FFF;
        background-color: #000;
        text-align: center;
        padding-top: 8px;
        padding-right: 8px;
        padding-bottom: 8px;
        padding-left: 7px;
        text-decoration: none;
    a:visited {
        color: #FFF;
        background-color: #000;
        text-decoration: none;
    a:hover {
        color: #000;
        background-color: #FFF;
        text-decoration: none;   
    a:active {
        color: #FFF;
        background-color: #000;
        text-decoration: none;   
    a.menu:link {
         color: #000   
         background-color: #FFF;
         text-decoration: none;
    </head>
    <body>
    <div class="navigation">
        <ul>
            <li class="menu"><a href="index.html" target="_self">HOME</a></li>
    </body>
    Thank you very much.

    http://www.itworld.com/development/351097/setting-active-menu-item-based-current-url-jquer y

  • How do I put a link for one of my other pages I've created on the same site

    How do I put a link for one of my other pages I've created on the same site

    If it's a text based link select the text and go to the Inspector/Link/Hyperlink pane and select One of my pages option:
    Click to view full size
    Or use the navbar that iWeb creates at the top of each page.  Go to the Inspector/Page/Page pane and make sure the navbar is activated for each page.
    Click to view full size
    OT

  • How to update a column with different values but all other row values r sam

    Hi,
    I have a table like this.
    Col1 col2 col3 col4
    10 20 30
    10 20 30
    10 20 30
    i need to update col4 with different values coming from other table like this
    Col1 col2 col3 col4
    10 20 30 xxxx
    10 20 30 yyyy
    10 20 30 zzzz
    how can i update the table. pls let me know how to use the where condition in the update stmt.
    thanks,
    jay
    Edited by: user2558790 on Nov 20, 2009 12:26 PM

    what is the logic for this kind of update...????
    Greetings,
    Sim

Maybe you are looking for