PV00 and PA40,20,30 conflict

hi all thanks for all for replyng me previously..
but i need some deep explanation from you , my reqirment is pv00 has to have all PA access and pa20,pa40,pa30 should only have one PA area(JKSB)..
so what shall i do , theese two sets of T-codes has to assign to one user..
truly appricjiate your expertice
regards
buddhike

Buddhike,
Why does PV00 have to have all PA* access (I am assuming you mean infotypes?). Looking at what PV00 requires it should only need access to the following infotypes 0000, 0001, 0002, 0007, 2001, 2002 and 1000, 10001 with subtypes of A020, A025, A040, B020, B025, B040.
Can you be more specific of what it is you are trying to do?

Similar Messages

Problem with PA20, PA30, and PA40

Hi!
I cannot use transactions PA20, PA30, or PA40 in our development system. When I try, I crash and get a dump. It fails here:
IF NOT pernr_tab[] IS INITIAL.
SELECT pernr ename AS name begda endda FROM pa0001
    INTO CORRESPONDING FIELDS OF TABLE l_pernr_date_tab
      FOR ALL ENTRIES IN pernr_tab
        WHERE pernr = pernr_tab-pernr AND
              sprps EQ space.
This is the error:
Error analysis
    An entry was to be entered into the table
     "\FUNCTION=HR_GET_TEXT_FOR_OBJECTS\DATA=L_PERNR_DATE_TAB" (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
    The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
     initial lines into a table with a unique key.
Nobody else has this problem. My guess is that I had done a search of EE's at one time, and something or someone in the list is causing the crash.
Is there a way for me to clear something out so that I can run PA20, PA30, or PA40without this list?
Or - If you now of another reason why I may be having this issue and nobody else is, can you suggest a fix?
Thanks!
Jo

I was able to find a solution to this problem through OSS note 416695.
There is an SAP program named RH_DELETE_COL_USER_SETTINGS. I ran it, entered my Logon ID, and had it delete "last object selection" and "search variants."
Once I did that, I was able to get into pa20, pa30, and pa40 again. (I.e., my hit list with the "bad employee" was gone.)

[solved] pacman -Su fails ("openntpd and ntp are in conflict")

I have ntp installed. Today when I tried to do a full upgrade I got:
# pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: openntpd and ntp are in conflict. Remove ntp? [y/N]
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: openntpd and ntp are in conflict
If I accept to remove ntp, pacman tells me that the following packages will be upgraded:
# pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: openntpd and ntp are in conflict. Remove ntp? [y/N] y
Targets (155): archlinux-keyring-20121113-1 at-spi2-atk-2.6.2-1
at-spi2-core-2.6.2-1 aurvote-1.5-1 automake-1.12.5-1
binutils-multilib-2.23.1-1 bison-2.6.5-1 blas-3.4.2-1
boost-1.50.0-3 boost-libs-1.50.0-3 brasero-3.6.1-1
ca-certificates-20121105-1 colord-0.1.24-3 cronie-1.4.8-4
emacs-24.2-3 evolution-data-server-3.6.2-1 farstream-0.2.2-1
ffmpeg-1:1.0-2 ffmpeg-compat-20120509-2 firefox-17.0-1
fontforge-20120731_b-2 fuse-2.9.2-1 gcr-3.6.2-2 gedit-3.6.2-1
glib-networking-2.34.2-1 glib2-2.34.2-1 glpk-4.47-2
gnome-desktop-1:3.6.2-1 gnome-icon-theme-3.6.2-1
gnome-icon-theme-symbolic-3.6.2-1 gnome-keyring-3.6.2-1
gnome-menus-3.6.1-1 gnome-mplayer-1.0.7-2
gnome-online-accounts-3.6.2-1 gnome-panel-3.6.2-1
gnutls-3.1.4-1 gobject-introspection-1.34.2-1
gsettings-desktop-schemas-3.6.1-1 gst-plugins-bad-1.0.3-1
gst-plugins-base-1.0.3-1 gst-plugins-base-libs-1.0.3-1
gst-plugins-good-1.0.3-1 gstreamer-1.0.3-1
gstreamer0.10-ugly-0.10.19-3
gstreamer0.10-ugly-plugins-0.10.19-3 gucharmap-3.6.1-1
gvfs-1.14.2-1 harfbuzz-0.9.6-1 icu-50.1-2 intel-dri-9.0.1-1
iputils-20121114-1 khrplatform-devel-9.0.1-1 kmod-11-2
lapack-3.4.2-1 ldns-1.6.16-1 lib32-cairo-1.12.8-1
lib32-gdk-pixbuf2-2.26.5-1 lib32-glib2-2.34.2-1
lib32-gnutls-3.1.4-1 lib32-harfbuzz-0.9.6-1 lib32-icu-50.1-1
lib32-intel-dri-9.0.1-1 lib32-libdrm-2.4.40-1
lib32-libgl-9.0.1-1 lib32-libglapi-9.0.1-1 lib32-mesa-9.0.1-1
lib32-nspr-4.9.3-2 lib32-nss-3.14-2 lib32-pango-1.32.2-1
lib32-pixman-0.28.0-1 lib32-qt-4.8.3-3 libcap-ng-0.7.3-1
libegl-9.0.1-1 libgbm-9.0.1-1 libgl-9.0.1-1 libglapi-9.0.1-1
libgles-9.0.1-1 libgsf-1.14.25-1 libgweather-3.6.2-1
libpng12-1.2.50-2 libquicktime-1.2.4-3
libreoffice-base-3.6.3-3 libreoffice-calc-3.6.3-3
libreoffice-common-3.6.3-3 libreoffice-draw-3.6.3-3
libreoffice-extension-nlpsolver-3.6.3-3
libreoffice-extension-pdfimport-3.6.3-3
libreoffice-extension-presentation-minimizer-3.6.3-3
libreoffice-extension-presenter-screen-3.6.3-3
libreoffice-extension-report-builder-3.6.3-3
libreoffice-extension-wiki-publisher-3.6.3-3
libreoffice-impress-3.6.3-3 libreoffice-math-3.6.3-3
libreoffice-sdk-3.6.3-3 libreoffice-writer-3.6.3-3
libsecret-0.12-2 libsoup-2.40.2-1 libsoup-gnome-2.40.2-1
libtracker-sparql-0.14.4-2 libwnck3-3.4.4-1
live-media-2012.11.08-1 logrotate-3.8.2-2 ltrace-0.7.0-1
lv2-1.2.0-1 maxima-5.28.0-4 mesa-9.0.1-1 mkinitcpio-0.11.2-1
mplayer-35421-1 nautilus-3.6.3-1 ntp-4.2.6.p5-11 [removal]
openntpd-3.9p1-21 openssh-6.1p1-4 opera-12.11.1661-1
pango-1.32.2-1 pkgfile-7-2 plotutils-2.6-3
pygobject-devel-3.4.2-1 python-distribute-0.6.30-1
python-pytz-2012h-1 python2-distribute-0.6.30-1
python2-gobject-3.4.2-1 python2-logilab-astng-0.24.1-2
python2-logilab-common-0.58.3-2 python2-matplotlib-1.2.0-3
python2-opengl-3.0.2-2 python2-pytz-2012h-1 qjson-0.8.0-1
qt-4.8.3-6 raptor-2.0.8-2 rfkill-0.4-6 sbcl-1.1.1-2
sdl_mixer-1.2.12-3 shadow-4.1.5.1-2 skype-4.1.0.20-2
sord-0.10.4-1 suil-0.6.6-1 telepathy-glib-0.20.1-1
texmacs-1.0.7.16-1 thunderbird-17.0-1 tzdata-2012j-1
util-linux-2.22.1-3 vi-1:050325-3 vlc-2.0.4-4
vte-common-0.34.2-1 webkitgtk2-1.10.1-3 webkitgtk3-1.10.1-3
wine-1.5.17-1 wxgtk-2.8.12.1-4 wxmaxima-12.09.0-1
x264-20121113-1 xf86-video-intel-2.20.13-1 xmms-1.2.11-6
xulrunner-17.0-1 yelp-3.6.2-1 zsh-5.0.0-3
Total Download Size: 495.69 MiB
Total Installed Size: 2334.87 MiB
Net Upgrade Size: 61.25 MiB
Proceed with installation? [Y/n] n
How can I investigate what's the source of the problem? Is there a way to get pacman to tell me which package it is that is trying to pull in openntpd? (Or does anybody know right away how to resolve this issue?)
Oh, by the way: "pacman -Sii openntpd" says
Required By : networkmanager-dispatcher-openntpd
but I don't use networkmanager.
Last edited by halun (2012-11-23 07:54:51)

Ha, how stupid of me...
I thought openntpd was being pulled in, but it was already installed (by me, apparently) although I've never used it. Removing it by hand before upgrading resolved the problem. Thanks!

"eclipse and xulrunner are in conflict"?

I was trying to install Eclipse from extra, but I ran into the following problem:
➜ ~ sudo pacman -S eclipse
resolving dependencies...
looking for inter-conflicts...
:: eclipse and xulrunner are in conflict. Remove xulrunner? [y/N] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: eclipse and xulrunner are in conflict
I have a few programs installed that depend on xulrunner, so removing it doesn't work.
Is pacman's local database corrupted or is there really a conflict here? I can't figure out how to get pacman to tell me why xulrunner and Eclipse are in conflict.

wonder wrote:
skunktrader wrote:Please search before posting
https://bbs.archlinux.org/viewtopic.php?id=136845
that's the most stupidest solution ever . the best solution is to report on the tracker and drop xulrunner from monodevelop dependency chain
The best solution, imho, would be to wait for the fix in "testing"... I've not reported in the tracker because someone else had already done and warned about the removal of xulrunner... without effect.
And, sorry, i'm not qualified to drop xulrunner from Monodevelop dependancy chain.
Anyway, i prefer using a old version of Eclipse AND Monodevelop than the brand new shiny version of Eclipse without Monodevelop.
Last edited by jaco (2012-03-02 10:58:12)

[Solved] binutils-multilib and binutils are in conflict

Just enabled [multilib] repository and upgraded my system except for anything that depends on binutils-multilib because pacman thinks that "binutils-multilib and binutils are in conflict." How does one go about resolving the conflict?
Last edited by matkam (2010-08-28 17:53:39)

binutils-multilib should provide binutils as well, so this is the expected behaviour.
$ pacman -Qi binutils-multilib
Name : binutils-multilib
Version : 2.20.1-4
URL : http://www.gnu.org/software/binutils/
Licenses : GPL
Groups : None
Provides : binutils=2.20.1-4
Depends On : glibc>=2.12-1 zlib
Optional Deps : None
Required By : gcc-multilib
Conflicts With : binutils
Replaces : None
Installed Size : 13248.00 K
Packager : Jan "heftig" Steffens <[email protected]>
Architecture : x86_64
Build Date : Wed 25 Aug 2010 10:23:26 AM EEST
Install Date : Fri 27 Aug 2010 01:37:18 PM EEST
Install Reason : Explicitly installed
Install Script : Yes
Description : A set of programs to assemble and manipulate binary and object
files for multilib

[SOLVED] baloo-frameworks and baloo4 are in conflict

Hi together,
i just wanted to do an update after quite a long time (few months) but i cannot do the update because of the conflict of baloo-frameworks and baloo4 (translated from german):
# pacman -Syu
:: Synchronize package database...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Start update...
:: attica by extra/attica-qt4? [J/n]
:: ca-certificates-java by core/ca-certificates-utils? [J/n]
:: dirmngr by core/gnupg? [J/n]
:: intel-dri by extra/mesa? [J/n]
:: java-common by extra/java-runtime-common? [J/n]
:: kdebase-katepart by extra/katepart4? [J/n]
:: kdebase-konsole by extra/konsole? [J/n]
:: kdebase-kwrite by extra/kwrite? [J/n]
:: kdeedu-kalgebra by extra/kalgebra? [J/n]
:: kdeedu-kanagram by extra/kanagram? [J/n]
:: kdeedu-khangman by extra/khangman? [J/n]
:: kdeedu-kig by extra/kig? [J/n]
:: kdeedu-parley by extra/parley? [J/n]
:: kdegraphics-gwenview by extra/gwenview? [J/n]
:: kdesdk-kapptemplate by extra/kapptemplate? [J/n]
:: kdesdk-kate by extra/kate? [J/n]
:: kdesdk-okteta by extra/okteta? [J/n]
:: lib32-intel-dri by multilib/lib32-mesa? [J/n]
:: libaccounts-qt by extra/libaccounts-qt4? [J/n]
:: libltdl by core/libtool? [J/n]
:: lirc-utils by extra/lirc? [J/n]
:: qtkeychain by community/qtkeychain-qt4? [J/n]
:: signon by extra/signon-qt4? [J/n]
:: telepathy-qt by extra/telepathy-qt4? [J/n]
Check dependencies...
:: There are 4 providers for libgl:
:: Repositorium extra
1) mesa-libgl 2) nvidia-304xx-libgl 3) nvidia-340xx-libgl 4) nvidia-libgl
Select (Default=1): 4
:: There are 4 providers for lib32-libgl:
:: Repositorium multilib
1) lib32-mesa-libgl 2) lib32-nvidia-304xx-libgl 3) lib32-nvidia-340xx-libgl 4) lib32-nvidia-libgl
Select (Default=1): 4
Warning: Detected dependency cycle:
Warning: xorg-server will be installed before nvidia-libgl
Warning: Detected dependency cycle:
Warning: harfbuzz will be installed freetype2
Warning: Detected dependency cycle:
Warning: lib32-harfbuzz will be installed lib32-freetype2
Searching for conflicts...
Error: Not solveable conflict
:: baloo-frameworks and baloo4 remain in conflict
I tried already to search for an solution but i couldn't find any for that case.
Thanks for your help.
Best regards
Werzi
Last edited by Werzi2001 (2015-01-30 23:45:51)

I think Werzi2001 needs to read this news :
https://www.archlinux.org/news/transiti … -and-qt-5/
he probably doesn't know the news about the decision to mix KF5 applications and KDE4
if you want to use the KF5 version of these applications ( kate, baloo etc... ) simply answer "Yes" to all questions
check this thread for more information :
https://bbs.archlinux.org/viewtopic.php?id=192657
Last edited by Potomac (2015-01-30 19:41:37)

BadIi / exits for PA20, PA30 and PA40

Can someone help me know BadIi / exits for PA20, PA30 and PA40 transaction.

Hi Megha..
                 Please refer this BADI ... HRPAD00INFTYDB this may fulfill your needs
Or try this..
Go to SE18 and search for the BADI names starting with HR*
There you'll see that HRBEN BADIs refer to benefits, HRHAP BADIs refer to appraisals, HRPAY BADIs refer to payroll.
For OM BADIs please search as RH*
For userexits there is a zprogram code I written below thru which u can find userexits for particular transaction codes..
*& Report ZFIND_USEREXIT
REPORT ZFIND_USEREXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                   AND OBJECT = 'PROG'
                   AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
      SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
      SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
      TFDIR-FUNCNAME.
      SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                         AND OBJECT = 'FUGR'
                         AND OBJ_NAME EQ ENLFDIR-AREA.
      MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
                WHERE PGMID = 'R3TR'
                  AND OBJECT = 'SMOD'
                  AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
                                   TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
       20(20) P_TCODE,
       45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
           2 'Exit Name',
          21 SY-VLINE ,
          22 'Description',
          95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
      SELECT SINGLE * FROM MODSAPT
             WHERE SPRSL = SY-LANGU AND
                    NAME = JTAB-OBJ_NAME.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 SY-VLINE,
             2 JTAB-OBJ_NAME HOTSPOT ON,
            21 SY-VLINE ,
            22 MODSAPT-MODTEXT,
            95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
This will surely help u.
Edited by: Jhings on Jan 29, 2011 11:35 AM

[SOLVED]Cannot upgrade pacman because gnupg and gnupg2 are in conflict

I have tried a system update with "pacman -Syu". Pacman says that pacman needs to be upgraded first. I let this happen. Then I get the conflict. Both paths (remove gnupg2 and not remove gnupg2) fail.
:: gnupg and gnupg2 are in conflict. Remove gnupg2? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: gcc: requires gcc-libs=4.6.2-7
:: gnupg and gnupg2 are in conflict. Remove gnupg2? [y/N] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
Has anybody an idea how to proceed. An atempt to upgrade gcc fails as well
pacman -S gcc
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] n
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: libtool: requires gcc=4.6.2
Since any incosistency between gcc and its related libraries are usual fatal, I prefer not to experiment.
Thanks in advance for any hint.
Helmut
Last edited by helmut (2012-05-30 19:49:59)

Covered extensively over the last couple of months, eg:
https://bbs.archlinux.org/viewtopic.php?id=139412
https://bbs.archlinux.org/viewtopic.php?pid=1057709
et al...

[SOLVED] libbaloo4 and baloo are in conflict

Hello. I tried to upgrade my x86 arch installation this morning by running "sudo pacman -Syu". Here is the output:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace glamor-egl with extra/xorg-server? [Y/n]
:: Replace kactivities with extra/kactivities4? [Y/n]
:: Replace kdenetwork-kdnssd with extra/kdenetwork-zeroconf-ioslave? [Y/n]
:: Replace kdeutils-kwallet with extra/kdeutils-kwalletmanager? [Y/n]
:: Replace libusbx with core/libusb? [Y/n]
:: Replace lzo2 with core/lzo? [Y/n]
:: Replace phonon-vlc with extra/phonon-qt4-vlc? [Y/n]
:: Replace polkit-qt with extra/polkit-qt4? [Y/n]
:: Replace shared-color-profiles with extra/colord? [Y/n]
:: Replace twisted with extra/python2-twisted? [Y/n]
resolving dependencies...
warning: dependency cycle detected:
warning: harfbuzz will be installed before its freetype2 dependency
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: libbaloo4 and baloo are in conflict (baloo<=4.14.0-1)
So does anyone know how I can fix this problem so that I can update all the packages on my system?
I don't have any baloo packages installed right now. I ran "pacman -Q | grep baloo" and it showed nothing.
I looked into it a little bit:
I'm using KDE, and some of their packages depend on baloo-widgets (which must be a recent change), so that is probably the root cause of my problem.
baloo-widgets is at 4.14.0-1.
baloo is at version 4.14.0-1.
baloo4-widgets is at version 4.14.0-1, provides replaces and conflicts with baloo-widgets,
libbaloo4 is at version 4.14.0-3, and conflicts with baloo<=4.14.0-1
baloo4 is at version 4.14.0-3, conflicts with baloo<=4.14.0-1, and is supposed to provide and replace baloo.
The three baloo4 packages were updated less than 24 hours ago by Andrea Scarpino (2014-09-13 07:35 UTC). I'm not sure when they were created.
This thread from 11 hours ago seems to be related: baloo4 update and not more necessary.
I don't update my Arch system very often. It's possible that the last time I updated was before 2014-08-20, which was the last time the old baloo packages were updated.
I tried to install baloo4-widgets manually but got a weird error:
$ sudo pacman -S baloo4-widgets
resolving dependencies...
looking for inter-conflicts...
Packages (4): kfilemetadata-4.14.0-1 libbaloo4-4.14.0-3 xapian-core-1:1.2.18-1 baloo4-widgets-4.14.0-1
Total Download Size: 0.38 MiB
Total Installed Size: 9.30 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
kfilemetadata-4.14.0-1-x86_64 68.0 KiB 267K/s 00:00 [############################################] 100%
libbaloo4-4.14.0-3-x86_64 262.7 KiB 535K/s 00:00 [############################################] 100%
baloo4-widgets-4.14.0-1-x86_64 57.3 KiB 9.33M/s 00:00 [############################################] 100%
(4/4) checking keys in keyring [############################################] 100%
(4/4) checking package integrity [############################################] 100%
(4/4) loading package files [############################################] 100%
(4/4) checking for file conflicts [############################################] 100%
error: failed to commit transaction (conflicting files)
libbaloo4: /usr/lib/kde4/kio_tags.so exists in filesystem
libbaloo4: /usr/lib/kde4/kio_timeline.so exists in filesystem
libbaloo4: /usr/share/kde4/services/tags.protocol exists in filesystem
libbaloo4: /usr/share/kde4/services/timeline.protocol exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by DavidEGrayson (2014-09-13 21:41:14)

Removing a package from a repository doesn't seem like a very nice thing to do, but is that how things are done in the Arch world? Does it need to be removed so that all the packages listing a dependency on "baloo" will use "baloo4" instead? I would prefer if packages never got deleted so I could restore my system to any arbitrary point in the past.

Regarding Transactions(pv00 and pv02)

Hai Experts,
I need to know for what purpose we are using the transaction PV00 AND PV02 and what are all the inputs we need to give for that transactions and in which infotypes the information are stored?.
With Regards,
R.Dhineshraj.

HI Dhinesh
PV00 Book Attendance see [example|Attendence Booking Event - How to Intervene through Workflow;
PV02 Prebook Attendance see [example|doubt on finding table;
s@chin

[SOLVED]libgl and nvidia-173xx-utils conflicts

sudo pacman -Syu
:: Синхронизируются базы данных пакетов...
core up to date
extra up to date
community up to date
archlinuxfr up to date
:: System full update...
Dependencies...
проверка на взаимную несовместимость...
:: libgl и nvidia-173xx-utils conflicts. Delete nvidia-173xx-utils? [y/N] n
error: обнаружен неразрешимый конфликт пакетов
error: не удалось подготовить запрос (конфликтующие зависимости)
:: libgl and nvidia-173xx-utils conflicts
(Sorry, original log is on russian, but I translated main words)
But!
pacman -Rns libgl
error: 'libgl': not found
How to fix it?
Last edited by Dr.X (2010-11-10 18:41:30)

Solved the problem is very simple - removing the nouveau. I have it was because I was in one blog/forum read that no problem with containing both nvidia and nouveau, but that one of them will be in Blacklist. But he interrupted me to upgrade. But the strangest thing - when I last updated, they do not conflict, but now whoop.
Thanks TigTex and wonder for your help!

Another account user is using my apple id as their rescue email. Apple know this but expect me to contact him directly rather that let lim know his error. Seem strange and a recipe for conflict. What do you think?

Another apple account user has put my apple id as their rescue email. Apple know this but expect me to contact him directly rather that let lim know his error. Seem strange and a recipe for conflict. What do you think?

Primary and alternate email addresses need to be verified but a rescue email address doesn't, it can be added to an account and used without being verified (you will get a verify button when adding/changing it, but the system doesn't force it to be verified). I would hope that the person using the email address as their rescue email address will notice that they aren't getting reset emails and that after contacting Support to get their security questions / password reset he/she will check what they've set it to and change it. The OP won't be able to log into the other account as he/she won't know its primary or alternate ids.

I can no longer sync iphone and ipad - 'cannot access conflicts' unable to retrieve conflict info from sync server' - any ideas please? Previous enquirer with this didn't seem to find an answer?

anybody found this and got the answer? both ipad and iphone used to be ok, just started happening last couple of months.
See from communities question that I'm not the only one, but don't seem to be able to find solution posted anywhere.
It's really annoying cos now ipad, iphone and outlook are all saying they don't match appointments and contacts - aaaarrrgghhhh!

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

How to restrict the PA30 and PA40.

Dear Experts,
Need so help to resolve the below issue.
Through the ABAP-HR program we are sending an email to the particular mail ID.
FOR HIRING A NEW EMPLOYEE:
while performing PA40 it has give authorization to user to update 0000,0001 and 0002 and it has to block the user not to update further any info type and a mail has to be sent to the mail ID( EX: Superior) which is maintained.
FOR EXISTING EMPLOYEE:
When ever the user want's to update the master data thru PA30 an email has to be sent to the mail id which is maintained to get the approval.
Is it possible to do this with out workflow.
Thanks in Advance.
Regards,
Prasad

Hi,
Means when ever User want to change the Master data through PA30 mail has to send to his superior and after getting the approval user has to change. is your query ?
have you maintained any workflow ? how the system configuration has done can you explain the configuration.

Cisco 3850 Switch and Windows 7 IP Conflicts

Team,
Last evening (Christmas eve) we setup a pair of Cisco 3850 with IP Base version 3.3.35SE (recommended) and 3.7.0E (very latest).
We got these to replace a very old switch that had died. Attached to this network are windows 7 PC's with all the standard patches, service packs, etc.
with standard port configs - no PC would work - and in fact on each screen we got the windows 7 IP Conflict pop up box.
This seemed very odd to us, as we know these IP's are all static (no dhcp on this segment at all)
we went with a very vanilla config on each port
interface g1/0/1
switchport host
that is it - nothing special at all.
well, after hours of research we found the 3850 has a problem where its "ip device tracking" (even though disabled, by way of NOT being enabled on any interface) will effect the windows 7 PC's ip address in use detection port start up phase!
This is a very big problem. I am frankly SHOCKED Cisco would release a major switch that is going to not work when connected to the average network with windows 7 PC's.
we tried 3+ hours of prescribed work-arounds found when researching this issue -
ip device tracking probe delay 10 (global config)
ip device tracking max 0 (disabed, on interface)
finally,
nmsp attach suppress (interface, however this appears to be a default command in all IOS-XE versions we tried, as the command did NOT show in the show run) . this effected many different nic card vendors (laptops, desktops) and nic card drivers levels from old to very recent.
Finally,
we compared a 3850 in another location to this one - and we never got HIT by this problem before because that 3850 only as TRUNK ports and no windows 7 hosts directly attached.
Doing more research, I found out this also can effect vmware guests running windows SERVER.
this is now a huge issue as we have a scheduled deployment of 3850's throughout our network which is going to be put on hold.
the work-around I came up with which is not great is -
Make ALL the "access" ports connected to PC TRUNK ports and leave the NATIVE vlan (untagged) as the vlan you want the PC's to be in
interface g1/0/1
switchport mode trunk
switchport trunk native vlan 1
this is NOT an acceptable workaround as this presents security issues even with
switchport trunk allowed vlan 1, etc. as the only allowed vlan.
Note: this issue manifested itself and windows 7 PC's were UNABLE to use the network. if you do "ipconfig /all | more" you would see
192.168.0.140(duplicate) and the interface would actually use 169.254.0.239(duplicate) so the duplicate message appeared twice in the output.
1) With and without an SVI interface on each 3850 for the vlan where the windows 7 machines had a duplicate
2) when we had an SVI and the command ip device tracking probe use-svi (or whatever the hidden command is I forget now, but it took it)
3) when we had aaa new-model configured - and not configured - thinking this was some artifact of having aaa turn on something like 802.1x port state
4) when could confirm NO DHCP SNOOPING
5) when we DID not use static IP's - and had the switch assign DHCP addresses - the Windows 7 PC's STILL had duplicates and didnt work for their "Just leased" ip's.
6) when we could confirm ios-xe ip device tracking = disabled with show ip device tracking status, etc.
This is a major problem for this 3850 and unless we get a definitive answer on why this is happening and how we can rectify we are going to have to return our 3850's and get HP Procurve's something I would rather avoid doing. There is NO REASON I can imagine other than older switches who's ports default to ROUTED ports (i.e.. no ip switchport) where a switch should not at least function as a bare switch with essentially a default configuration out of the box.
Any ideas? I'm working well now with the ports ALL in trunking mode with vlan 1 native, but this is not a scalable workaround we can live with as we have security risks of a port not blocking certain vlans from going out ports to pc's, etc. that attackers could send tags on at that point, etc.
thanks,
Joe Brunner
#19366

thanks for replying - i'm not onsite (its a standalone network) - but here is what it is -
Answers in line -
This all stems from a switch replacement correct?
yes a 10 year old Allied Telesyn switch was replaced that had no config - like a hub, just used for connectivity.
Are these 3850's in a stack?
>yes, tested all aspects of the stack many times.
Does it have a managment ip address -If so, is it using the old switch ip address
>old switch had no ip - i made a "management interface" on vlan 1 - BUT no ip on the built-in management interface on the switch.
What are they connecting to? (a router/L3 switch/anohter switch- cisco-HP etc..)
>various other devices - only 1 link back to a single 3750x stack. that switch is "hardened" so to speak to reveal or propagate very little by design.
How are they connected( L3 interface/L2 trunk/access port)
>all ports are left in trunk mode with vlan 1 as the active and untagged port. this was the workaround done to ever get the switch going. in "out of the box" or default mode as we initially wanted (no config) links to windows 7 PC's didnt work. links to linux or other devices non-windows did work!
Are thse switches performing inter-vlan routing or just acting as host switches?
>dumb flat network, no routing.
Is ip routing enabled?
>not unless enabled on 3850 by default. I didnt type "ip routing"
Do you have multiple vlans in your network and if so ar ethe being propergated to these new switches?
Your 7 pcs = are they just client pcs not servers?
client PC's - no servers OS per say.
can you confirm something like ICS isnt enabled (Internet connection sharing) on any of them?
>yes not enabled.
Are the just using one NIC each?
> one machine is dual homed - but we know where its "second nic" goes - to another cisco network which is NOT connected back to this one. we traced all our ports a few times thinking even perhaps some small hub was "reflecting" traffic back to us - like a blackbox. Strangest thing -
default config out of the box - with ALL ports SHUTDOWN EXCEPT the single windows 7 facing port - the windows 7 machine STILL registered an IP CONFLICT when connected to the 3850 - even when it had NO SVI's!!! (i know mind numbing). if you disconnected the pc and connected it to an old cisco switch - it worked fine!!! wow.
sh switch
2 identical 3850's in working stack. power and network stacked. both at same version, etc - upgraded each time with "software install file flash:<long ios name>.bin
tested all power and general 3850 stacking. saw no issues.
sh int trunk
>all ports are now trunks (hence the workaround used to get it up).
has 20 trunks to PC's and some single connected switches (far away on fiber) - all allow only vlan 1 - no other vlans were created - very very simple network. vlan 1 is native
sh vlan brief
>just vlan 1 - no vlans created, checked this many times - had vlan 100 at one point - made sure it was gone over a period of hours.
sh vtp status
not setup - left complete default; no vtp domain set - connected to all switches in transparent model if a switch connection exists.
sh cdp neighbours
cant post (for god and country LOL) but there is one link back to our "core" so to speak - that switch is hardened not to allow any settings to slip over to new switches so hence no vtp, cdp is one to help troubleshooting.
sh ip route
just the L and C routes for the vlan 1 ip address 192.168.17.1/24
no static routes
no vlan interfaces other than int vlan 1
no ip address on g0/0/0 -> the default 3850 management interface hard assigned to the 3850 VRF you cant remove.
int g0/0/0
ip vrf forwarding Switch_Mgmt
i can get over there if you think of anything else key to show the group.
thanks,
Joe

PV00 and PA40,20,30 conflict

Similar Messages

Maybe you are looking for