"PWC6317: The attributes for a standard action or an uninterpreted tag cann

I recently added the following to my project pom.xml file:
<dependency>
<groupId>teamdev</groupId>
<artifactId>quipukit</artifactId>
<version>1.5</version>
</dependency>
<dependency>
<groupId>teamdev.temp</groupId>
<artifactId>license</artifactId>
<version>1.5</version>
</dependency>
<dependency>
<groupId>teamdev.lib</groupId>
<artifactId>jfreeChart</artifactId>
<version>1.5</version>
</dependency>
<dependency>
<groupId>teamdev.lib</groupId>
<artifactId>jCommon</artifactId>
<version>1.5</version>
</dependency>
After doing so, when I try to start up the app, I get the following error:
"PWC6317: The attributes for a standard action or an uninterpreted tag cannot be deferred expressions"
The web.xml header is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.5" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd">
I am using FireFox 3. I also use Jetty as my web container.
Any help on this matter would be appreciated.
Thanks.
JDev1

BalusC,
I am trying to use quipukit, which provides JSF components.
I have a jsf page with no quipukit components. However, when I add the quipukit dependency to the pom file, the jsf page does not display, but instead shows that error.
I did go through the google links you posted, however, to no avail.
It may be a quipukit issue or configuration problem. Could be JSF as well, not sure.
Any ideas would be appreciated.
Thanks.
JDev1

Similar Messages

  • The attributes for user could not be determined --

    Hi,
    Our is extended classic scenario:srm5.0 & ECC6.0
    we are getting the following error in the org plan:
    "The attributes for user could not be determined "
    The error is occuring , when we log into the web browser.
    we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
    when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
    Thanks in advance,
    RK.

    Hi All,
    Thanks for your support...
    I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
    I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
    The solution:
    The CP has been deleted from the org plan.
    Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
    Thanks and Regards,
    RK.

  • Error - The attributes for user could not be determined

    When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
    The attributes for user could not be determined
    It does not happen on other transactions (like Sourcing or Issue POs).
    The buyer is in the org. plan and I have checked the attributes and they seem ok.
    What could be the issue ???
    Thanks
    -Bakulesh

    Hi
    <b>Please go through these links -></b>
    The attributes for user could not be determined --
    'Error in writing attributes' when using function tab
    Company code for system missing in user attributes
    BBP_POC not working in SRM 5.0
    Re: urgent: regarding ATTRIBUTES
    Regards
    - Atul

  • Where is the download for Acrobat Standard 9?

    I can't find a download for Acrobat Standard 9.  Acrobat Pro 9 is on the direct download site but not the standard version.  I have a valid serial number but it doesn't work on the Pro download.

    This is correct there is a separate Acrobat 9 Standard installer.  If you choose the download option at the time of purchase then please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ for information on how to download Acrobat 9 Standard from your account.

  • How can I get the attributes for this tag?

    THis is the tag:
    <InvoiceQueryRs requestID="1" statusCode="0" statusSeverity="Info" statusMessage="Status OK">
    But when I do a nodeType() is returns a "1" which is Element. Shouldn't it return Attribute type?
    org.w3c.dom.Document xDoc = xml.parseXML(false);
    Element el = xDoc.getDocumentElement(); //Using DOM API
    NodeList nl = el.getElementsByTagName("InvoiceQueryRs");
    NodeList nl = el.getChildNodes();
    for(int c = 0; c < nl.getLength(); c++) {
    System.out.println(nl.item(c).getAttributes());
    This code returns a "com.ibm.xml.dom.NamedNodeMapImpl@88f03c" for the attributes. I also tried a NamedNodeMap with similar results. Please help if you can!
    THanks
    Bill

    Nevermind, I got it. Thanks.

  • Recover from checking Hidden in the attributes for a HD user folder

    I am in the process of setting up a new "wonderful" Windows 8.1 laptop.  I managed to check the hidden box in an attributes section for my personal user folder.  Now, i cannot even get t "My PC" to look at any of my files in my own account. 
    I need to know how to recover from this stupid error.  I am just stating the setup so I can als re-initialize the hard drive if that is te best way to recover.
    Please provde me with some assistance.
    Very Frustrated

    Hi,
    Open windows Control Panel and in the top right, next to View by: select 'Large Icons'.  From the new layout, select Folder Options and then select the View tab.
    Click the 'Restore Defaults' button towards the bottom right and then click Apply and Ok to save this change.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Maintain the attributes for the master data-InfoSource

    Hi All,
    I got the error in the Schedule Process chain were one of my Delta Load-Master Data is not taking data from the source system.For rectifing the error is tried to check the Master data attribute (InfoPackage) in InfoSource. But I am getting the error message as "Attributes are not yet maintained" RSM006. Please provide the solution to the problem. As I want to run the scheduled Process Chain.
    Regards,
    Rajesh Giribuwa.

    Hi,
    Welcome to SDN!
    In the error message do you see a question mark (or help/explanation button)? Clcick on it and see the system explanation and proposed remedy.
    Best regards,
    Eugene

  • Can a ReadOnly-JTextField get the Focus for a Copy action?

    Until JDK 1.3 a JTextField can be focusable and selectable, also the JTextField
    is not editable. So the user can Copy (with Ctrl-C) the displayed text to an other application.
    With JDK 1.4 the user cannot select the JTextField, if the Field is not editable.
    How I can the JTextField set to selectable (or focusable) in not editable state?
    thanks for suggestions
    Roland

    I suppose a workaround would be to make the JTextField editable, and to assign a DocumentListener that throws away all attempted updates to the content. Look in the API documentation for JTextField for an example of a DocumentListener that controls the content (you would just override insertString and deleteString (?) to do nothing).

  • Attributes for the sys event EC_DEVICE_ADD

    Hi,
    There are some changes in the Solaris 11 sysevent Attributes. How to know what are the attributes for the event EC_DEVICE_ADD. Earlier these were listed in dev.h now I do not find that header file on Solaris 11.
    -Sachin

    Hi Reetesh,
    I have written following code into the ADD ROW button
    System.out.println("Coming in Click Event");
    OAApplicationModuleImpl am = (OAApplicationModuleImpl) pageContext.getApplicationModule(webBean);
    OAWebBean innerTablebean = (OAWebBean)webBean.findChildRecursive("region12");
    OATableBean innerTable = (OATableBean)webBean.findChildRecursive("innerTablebean");
    OAInnerDataObjectEnumerator enum = new OAInnerDataObjectEnumerator(pageContext,innerTablebean);
    while(enum.hasMoreElements())
    RowSet innerRowSet = (RowSet) enum.nextElement();
    Row []rowsInRange = innerRowSet.getAllRowsInRange();
    OARow newRow = (OARow) innerRowSet.createRow();
    OADBTransaction dbt = am.getOADBTransaction();
    Number b = dbt.getSequenceValue("PK_XX_BATCH_PROGRAM_PARAMETERS");
    newRow.setAttribute("ProgramId", b);
    newRow.setAttribute("ProgramParmId",b);
    newRow.setAttribute("ParameterName",new String(""));
    newRow.setAttribute("ParameterDataType",new String(""));
    newRow.setAttribute("ParameterInOutType",new String(""));
    innerRowSet.insertRow(newRow);
    Now the problem occurs only when there are more than one rows in parent table... As many rows are there in parent table that many times the rows are being added.
    With Regards,
    Sandip

  • How to find the Attribute Tab for 0MOVETYPE?

    Hi All,
    I am trying to create the Attributes for 0MOVETYPE as per T156HT table. I am not able to find the Attribute tab. Please can you suggest me how to get T156HT data using Generic Datasource structure in BW or Is there any way to get R/3 structure in BW?
    Regards,
    Kiran

    T156HT is text table.
    You need to load only text ? It doesnt have any attibute.
    Go to RSD1
    Give your infoobject name.Check under master data/text tab if you have ticked "Text".
    You can create generic text datasource using table RSO2.
    Hope this helps.

  • Report on document based on document attributes (custom or standard)

    Hi All,
    Got a requirement to create a custom report in Solman to display document details under a project based upon the attributes (Custom or standard) of the document eg- Doc attribte phase 1 would result in a set of documents, phase 2 in another set.
    Please help me from where I can get the required data.
    Regards,

    I think i should have asked my question in a seperate thread...since it is considered as a reply to this thread....No indication/tool bar for rewardings points is found.....
    May be next time will reward more than expected..
    Thanks for all your service.
    Regards,
    Murali.S

  • How to change the color for HTML words in JEditorPane?

    Hi Sir,
    In the JTextPane , we could change the word's color by using:
    Style style = doc.addStyle("test",null);
    StyleConstants.setForeground(style, Color.red);
    doc.setCharacterAttributes(10,20,syle,true);
    we can change the text into red color,which range is from 10 to 30.
    But how to change the color for HTML words in JEditorPane?

    Hi,
    you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
    doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by   /**
       * set the attributes for a given editor. If a range of
       * text is selected, the attributes are applied to the selection.
       * If nothing is selected, the input attributes of the given
       * editor are set thus applying the given attributes to future
       * inputs.
       * @param editor  the editor pane to apply the attributes to
       * @param a  the set of attributes to apply
      public void applyAttributes(JEditorPane editor, AttributeSet a) {
        ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
        editor.requestFocus();
        int start = editor.getSelectionStart();
        int end = editor.getSelectionEnd();
        if(end != start) {
          doc.setCharacterAttributes(start, end - start, a, false);
        else {
          MutableAttributeSet inputAttributes =
            ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
          inputAttributes.addAttributes(a);
      } Ulrich

  • Looking for a reference manual that actually describes in detail all attributes for a command

    I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book".
    Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they give the student specific settings for the Refine Edge dialog bog under the Quick Selection tool. They say, "To prepare the edge for a drop shadow, set Smooth to 24, Feather to 0.5, Contrast to 12, and Shift Edge to -21". Note: I am calling things like Smooth, Feather, Contrast, etc command attributes.
    My question is not about this specific example, but all these attribute values for all the commands. For example, what does Shift Edge really do when negative or positive. My question is: does a reference, either a book, pdf, or a non-Adobe product (probably a book) exist that actually explains when each attribute actually does for every command? Basically looking for a boring detailed reference guide so when I am using a specific command, I can read about the attributes for the specific command and understand what the values really mean and not guess my trial and error.
    Thanks in Advance,
    LouF

    Lou Fuchs wrote:
    For example, I just happen to have my book open to page 113 and it is showing me (at the bottom of the page) the dialog box for Layer Style.  I was hoping for a reference manual that explains every option in the that dialog box in detail and tells you what each option means and how it effects the image.
    I hope this clarifies what I am looking for.
    Here's a little snippet from the info about Layer Styles in the Adobe manual.
    Layer style options
    To the top
    Altitude For the Bevel and Emboss effect, sets the height of the light source. A setting of 0 is equivalent to ground level, 90 is directly above the layer. Angle Determines the lighting angle at which the effect is applied to the layer. You can drag in the document window to adjust the angle of a Drop Shadow, Inner Shadow, or Satin effect.
    Anti-alias Blends the edge pixels of a contour or gloss contour. This option is most useful on small shadows with complicated contours. Blend Mode Determines how the layer style blends with the underlying layers, which may or may not include the active layer. For example, an inner shadow blends with the active layer because the effect is drawn on top of that layer, but a drop shadow blends only with the layers beneath the active layer. In most cases, the default mode for each effect produces the best results. See Blending modes. Choke Shrinks the boundaries of the matte of an Inner Shadow or Inner Glow prior to blurring. Color Specifies the color of a shadow, glow, or highlight. You can click the color box and choose a color. Contour With solid-color glows, Contour allows you to create rings of transparency. With gradient-filled glows, Contour allows you to create variations in the repetition of the gradient color and opacity. In beveling and embossing, Contour allows you to sculpt the ridges, valleys, and bumps that are shaded in the embossing process. With shadows, Contour allows you to specify the fade. For more information, see Modify layer effects with contours. Distance Specifies the offset distance for a shadow or satin effect. You can drag in the document window to adjust the offset distance. Depth Specifies the depth of a bevel. It also specifies the depth of a pattern. Use Global Light This setting allows you to set one “master” lighting angle that is then available in all the layer effects that use shading: Drop Shadow, Inner Shadow, and Bevel and Emboss. In any of these effects, if Use Global Light is selected and you set a lighting angle, that angle becomes the global lighting angle. Any other effect that has Use Global Light selected automatically inherits the same angle setting. If Use Global Light is deselected, the lighting angle you set is “local” and applies only to that effect. You can also set the global lighting angle by choosing Layer Style > Global Light. Gloss Contour Creates a glossy, metallic appearance. Gloss Contour is applied after shading a bevel or emboss. Gradient Specifies the gradient of a layer effect. Click the gradient to display the Gradient Editor, or click the inverted arrow and choose a gradient from the pop-up panel. You can edit a gradient or create a new gradient using the Gradient Editor. You can edit the color or opacity in the Gradient Overlay panel the same way you edit them in the Gradient Editor. For some effects, you can specify additional gradient options. Reverse flips the orientation of the gradient, Align With Layer uses the bounding box of the layer to calculate the gradient fill, and Scale scales the application of the gradient. You can also move the center of the gradient by clicking and dragging in the image window. Style specifies the shape of the gradient. Highlight or Shadow Mode Specifies the blending mode of a bevel or emboss highlight or shadow. Jitter Varies the application of a gradient’s color and opacity. Layer Knocks Out Drop Shadow Controls the drop shadow’s visibility in a semitransparent layer. Noise Specifies the number of random elements in the opacity of a glow or shadow. Enter a value or drag the slider. Opacity Sets the opacity of the layer effect. Enter a value or drag the slider. Pattern Specifies the pattern of a layer effect. Click the pop-up panel and choose a pattern. Click the New Preset button          to create a new preset pattern based on the current settings. Click Snap To Origin to make the origin of the pattern the same as the origin of the document (when Link With Layer is selected), or to place the origin at the upper-left corner of the layer (if Link With Layer is deselected). Select Link With Layer if you want the pattern to move along with the layer as the layer moves. Drag the Scale slider or enter a value to specify the size of the pattern. Drag a pattern to position it in the layer; reset the position by using the Snap To Origin button. The Pattern option is not available if no patterns are loaded. Position Specifies the position of a stroke effect as Outside, Inside, or Center. Range Controls which portion or range of the glow is targeted for the contour. Size Specifies the radius and size of blur or the size of the shadow. Soften Blurs the results of shading to reduce unwanted artifacts. Source Specifies the source for an inner glow. Choose Center to apply a glow that emanates from the center of the layer’s content, or Edge toapply a glow that emanates from the inside edges of the layer’s content. Spread Expands the boundaries of the matte prior to blurring.
    Style Specifies the style of a bevel: Inner Bevel creates a bevel on the inside edges of the layer contents; Outer Bevel creates a bevel on the outside edges of the layer contents; Emboss simulates the effect of embossing the layer contents against the underlying layers; Pillow Emboss simulates the effect of stamping the edges of the layer contents into the underlying layers; and Stroke Emboss confines embossing to the boundaries of a stroke effect applied to the layer. (The Stroke Emboss effect is not visible if no stroke is applied to the layer.)
    Technique Smooth, Chisel Hard, and Chisel Soft are available for bevel and emboss effects; Softer and Precise apply to Inner Glow and Outer Glow effects.
    Smooth Blurs the edges of a matte slightly and is useful for all types of mattes, whether their edges are soft or hard. It does not preserve detailed features at larger sizes. Chisel Hard Uses a distance measurement technique and is primarily useful on hard-edged mattes from anti-aliased shapes such as type. It preserves detailed features better than the Smooth technique.
    Chisel Soft Uses a modified distance measurement technique and, although not as accurate as Chisel Hard, is more useful on a larger range of mattes. It preserves features better than the Smooth technique. Softer Applies a blur and is useful on all types of mattes, whether their edges are soft or hard. At larger sizes, Softer does not preserve detailed features.
    Precise Uses a distance measurement technique to create a glow and is primarily useful on hard-edged mattes from anti-aliased shapes
    such as type. It preserves features better than the Softer technique. Texture Applies a texture. Use Scale to scale the size of the texture. Select Link With Layer if you want the texture to move along with the layer as the layer moves. Invert inverts the texture. Depth varies the degree and direction (up/down) to which the texturing is applied. Snap To Origin makes the origin of the pattern the same as the origin of the document (if Link With Layer is deselected) or places the origin in the upper-left corner of the layer (if Link With Layer is selected). Drag the texture to position it in the layer.

  • Master data maintenance and attributes for GTIN/EAN

    A review of the SAP documentation indicates that  "You can use the consistency report to change the attributes (for example, quantity, length, height, and so on) of certain materials". The "and so on" seems to imply that the attributes can be user defined. If this correct, where is this data kept? Or do the attributes only include the fields from the Basic data 1 Dimensions/EAN data and Plant Data storage General data?
    I would expect we can use LSWM to mass update the GTIN for our existing material numbers. However, for new material master creation is there a function module that would be able to pull the next available GTIN number from the internal number range? Please note that we use LSWM to create all our material numbers. We would like to have the LSWM insert the next available GTIN number.
    Thank you for your response
    Brian

    Hi
    I had tried all sorts - attribute change run and manually activating the master data.  Still doesnt work.
    Anthony

  • Making changes for a standard report

    Hi all,
    can any one tell me how toi make the changes for a standard report as per the client requirment.
    This is a report for RFQ price comparision,there is a SAP standard report available with tarnsaction code ME49.But some modificatios are required in the format.
    How should I do this.

    >
    Siva Rama Anne wrote:
    > Hi all,
    >
    > can any one tell me how toi make the changes for a standard report as per the client requirment.
    > This is a report for RFQ price comparision,there is a SAP standard report available with tarnsaction code ME49.But some modificatios are required in the format.
    >
    > How should I do this.
    Hi Shiv,
      I checked the transaction ME49 and found that it is based on a executable report called RM06EPS0. Also it is very much possible to make changes to this repor using the enhancement points. I found that already the report provides a lot of enhancement points. Here have a look:-
    1) ENHANCEMENT-POINT RM06EPS0_G4 SPOTS ES_RM06EPS0
    2) ENHANCEMENT-POINT RM06EPS0_01 SPOTS ES_RM06EPS0
    3) ENHANCEMENT-POINT RM06EPS0_G5 SPOTS ES_RM06EPS0.
    4) ENHANCEMENT-POINT RM06EPS0_G6 SPOTS ES_RM06EPS0.
    5) ENHANCEMENT-POINT RM06EPS0_G7 SPOTS ES_RM06EPS0.
    6) ENHANCEMENT-POINT RM06EPS0_02 SPOTS ES_RM06EPS0.
    7) ENHANCEMENT-POINT RM06EPS0_06 SPOTS ES_RM06EPS0 .
    Please refer to link below for more information about enhancement spots:-
    http://help.sap.com/saphelp_nw04s/helpdata/en/91/f1e540f8648431e10000000a1550b0/frameset.htm
    Many regards,
    Ravi.

Maybe you are looking for

  • Hp officejet 4500 adf only scans one page at a time

    When I try to scan multiple pages with the adf, it will scan one page and stop - have to tell it each time to scan another page. I want separate files - but use to be able to scan several pages without stopping. Have downloaded the latest driver and

  • Query Reiqnred

    Hi All I have a data in the below format. PROJ_ID PRNT_V 27575 2-5 27576 2-5,8,13 27577 2-10,19,27-30 The above table data i want to convert from row to column as Proj ID Prnt_v 27575 2 27575 3 27575 4 27575 5 27576 2 27576 3 27576 4 27576 5 27576 8

  • Public request to Apple about the WiFi mess

    As a faithful Apple user I am deeply disappointed by the lack of response by Apple about the wifi problems many users (including myself) are experiencing. What makes the whole issue worse is the lack of a public statement by the company over this mes

  • HT4993 how do i set phone to ONLY download songs that ive selected in itunes

    how do i set up my iphone to ONLY synch songs that ive selected in itunes. Currently have all icloud songs on my phone.

  • Query in Background scheduling job...

    Hi friends,          Is it posiible to schedule a report which has additional screen developed by me(i.e SCREEN 1000 which is standard + SCREEN 9000 which is developed by me to  get the input from user) in background mode.         When i tried to do