PXE Boot with UEFI. WDS not sending WinPE wim

I am trying to test PXE booting on devices that only have UEFI and no CSM support.
We are running Windows Server 2008 R2 in our environment.
On the DHCP server, we have option 66 and 67 set. If I change option 67 to SMSBoot\x86\wdsnbp.com and boot a traditional BIOS system (non UEFI) the SCCM server responds and gives me the option to hit F12 and PXE boot. This works without issue and can deploy
images.
I then change option 67 to SMSBoot\x64\wdsmgfw.efi and use a machine that is pure UEFI (meaning UEFI without any legacy support / CSM). The system appears to successfully download the wdsmgfw.efi and font file via TFTP as shown in the WDS logs. However, it
then goes to the next sreen where it is trying to contact the WDS server. AFter retrying for a while it will error out with error 0x102 which I believe translates to ERROR_TIMEOUT
The SMSPXE.log repeats the following:
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName="" ServerRemoteName=""><Machine><ClientID>8908f9c4-c345-49ba-b137-af7b0b983584</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="GAS20043" OfferIDTime="7/24/2013 3:12:00 PM" PkgID="GAS00037" PackageVersion="" PackagePath="<a href="http:///SMS_DP_SMSPKG$/GAS00038">http://<IVE
REMOVED THIS>/SMS_DP_SMSPKG$/GAS00038" BootImageID="GAS00038" Mandatory="0"/></ClientIDReply>
SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
00:50:56:01:00:82, DF6A0C42-F909-B518-7B44-3150B662200B: found optional advertisement GAS20043 SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
Looking for bootImage GAS00038 SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
Any idea what may be going on?

Hey,
I am having the following situation:
DP1 = Windows Server 2008 R2 SP1 (Standalone Primary Site Server SCCM 2012 SP1 CU2)
DP2 = Windows Server 2012
UEFI Client: Microsoft Surface Pro (with Microsoft Surface Network Adapter)
BIOS Client: HyperV Virtual machine with Legacy network adapert
DP1; DP2 and DHCPServer all in Subnet1.
(IP Helper is set for DHCPServer for DHCP and for DP1 & DP2 for DHCP and BootP - I checked serveral times if everything is right here)
UEFI Client and BIOS Client in Subnet2.
Situation1 -- Using no DHCP Options and both DPs(DP1 and DP2) WDS running:
UEFI Client - Boots perfectly (contacting Server DP2)
BIOS Client - Boots perfectly (contacting Server DP2)
Situaion2 -- Using no DHCP Options and WDS just running on DP1:
UEFI Client - Does not boot (no error information is provided)
BIOS Client - Does not boot (no Bootfilename recieved)
Situation3 -- Using DHCP Options(Option 66="IP of DP1" Option 67="SMSBoot\x86\wdsnbp.com") and WDS just running on DP1:
UEFI Client - Does not boot (no error information is provided)
BIOS Client - Boots perfectly (contacting Server DP1)
Situation4 -- Using DHCP Options(Option 60="PXEClient" Option 66="IP of DP1" Option 67="SMSBoot\x86\wdsnbp.com") and WDS just running on DP1:
UEFI Client - Boots perfectly (contacting Server DP1)
BIOS Client - Does not boot (taking hours to recieve dhcp options..)
My problem is i am having a lot of location with 2008 R2 SP1 server only (this is why situation 1 is not enough for me :-( ).
Based on this article:
http://ccmexec.com/2013/05/configmgr-2012-uefi-and-pxe-boot-support/
x64 UEFI Devices should work with Server 2008 R2 SP1 (not only Server 2012).
Interesting is I am having ALL files on Server 2008 R2 SP1 like they are on Server 2012 (in SMSBoot\x86 folder, too!)??
Some more ideas?
Thank you for help

Similar Messages

PXE boot with UEFI

I get this everytime I try to PXE a UEFI device. I have even moved my PXE to server 2012. Changed to IP helpers.
Windows failed to start. A recent hardware or software change might be the cause. To fix it... <blahblah>
File:\Windows\System32\boot\winload.efi
Status: 0xc0000359
Any ideas?
Thanks,
Jason

Here it is...
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE 1/13/2014 12:28:09 PM 732 (0x02DC)
78:45:C4:C6:B1:74, 4C4C4544-0037-5210-8047-C7C04F525431: device is not in the database. SMSPXE 1/13/2014 12:28:09 PM 732 (0x02DC)
Getting boot action for unknown machine: item key: 2046820352 SMSPXE 1/13/2014 12:28:09 PM 732 (0x02DC)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>8f2e8c16-543f-4204-a65a-701cc4c40f3f</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="BSD200F7" OfferIDTime="1/9/2014 1:11:00 PM" PkgID="BSD000AB" PackageVersion="" PackagePath="http://sccm-dp04.HIDDEN/SMS_DP_SMSPKG$/BSD00001"
BootImageID="BSD00001" Mandatory="0"/></ClientIDReply>
SMSPXE 1/13/2014 12:28:09 PM 732 (0x02DC)
78:45:C4:C6:B1:74, 4C4C4544-0037-5210-8047-C7C04F525431: found optional advertisement BSD200F7 SMSPXE 1/13/2014 12:28:09 PM 732 (0x02DC)
Getting boot action for unknown machine: item key: 2046820352 SMSPXE 1/13/2014 12:28:12 PM 732 (0x02DC)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>8f2e8c16-543f-4204-a65a-701cc4c40f3f</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="BSD200F7" OfferIDTime="1/9/2014 1:11:00 PM" PkgID="BSD000AB" PackageVersion="" PackagePath="http://sccm-dp04.HIDDEEN/SMS_DP_SMSPKG$/BSD00001"
BootImageID="BSD00001" Mandatory="0"/></ClientIDReply>
SMSPXE 1/13/2014 12:28:13 PM 732 (0x02DC)
78:45:C4:C6:B1:74, 4C4C4544-0037-5210-8047-C7C04F525431: found optional advertisement BSD200F7 SMSPXE 1/13/2014 12:28:13 PM 732 (0x02DC)
Looking for bootImage BSD00001 SMSPXE 1/13/2014 12:28:13 PM 732 (0x02DC)
Looking for bootImage BSD00001 SMSPXE 1/13/2014 12:28:16 PM 732 (0x02DC)
Looking for bootImage BSD00001 SMSPXE 1/13/2014 12:28:16 PM 732 (0x02DC)

PXE-Boot with Hyper-V based on W2K12 R2 with Gen2-VMs

Dear Community,
as you probably know the new R2-Version was advertised with the ability of PxE-booting with the synthetic instead of the legacy-nic which works with poor 100 mbit/s.
Here´s the problem:
When I create a new virtual machine with Gen2 without the option "Secure Boot" and PxE-boot it, I get the following error:
Boot failed. EFI Network.
Boot failed. EFI SCSI Device.
No Operating System was Loaded. Press a key to retry the boot sequence
When I create another new virtual machine with Gen2 but with the option "Secure Boot" and PxE-boot it, I get this error:
Station IP address is x.x.x.x
Server IP address is x.x.x.x
NBP filename is pxelinux.0
NBP filesize is 15888 Bytes
Downloading NBP file...
Successfully downloaded NBP file.
Boot Failed. EFI Network. Failed Secure Boot Verification.
Boot Failed. EFI SCSI Device
No Operating System was Loaded. Press a key to retry the boot sequence
When taking a look at the log of the TFTP-Server (TFTPD32) I get the same information regardless which way I do it. The only interesting thing it says is:
"Peer returns ERROR <User aborted the transfer> ->aborting transfer"
I have also tried to use another tool called Serva as TFTP/PXE-Server -> The error still occurs.
Before anybody wants me to try to do it as Gen1 -> I know that this works, but I want to get it running under Gen2 since the synthetic one works (should work) much faster than the legacy-one.
Really looking forward to get some useful information here.
Thanks in advance !

This question was completely answered by Andy here:
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/4098e57f-c6da-493a-a772-87d60ee1d0a1/#b2808adb-a79e-49e6-8a00-2c324c3e41d1
He wrote:
"Apparently, there is an issue in WDS that causes it to use legacy NetBIOS name resolution instead of DNS to find a domain controller, and it impedes domain controller connectivity. The solution is simple - go to TCP advanced properties on WDS server,
and on WINS tab disable NetBIOS over TCP/IP. This forces WDS to use the right name resolution, and everything works perfectly."
I can confirm it. Works perfectly! Thanks to Andy!
Vadim

PXE-Boot with Linux

I have an IBM Machine (8193-75G) with Intel 10/100/1000 LAN. Is it
possible to do an PXE-Boot with Linux? Do I need a special driver?
Thanx

[email protected]
> I have an IBM Machine (8193-75G) with Intel 10/100/1000 LAN. Is it > possible to do an PXE-Boot with Linux? Do I need a special driver?
> Thanx
You might get an answer in the imaging forum
Jared L Jennings, CNE
Novell Support Forums SysOp.
http://support.novell.com/forums/faq_nntp.html
Posting with XanaNews Reader 1.15.7.4
Geek by Nature, NetWare by Choice.

PXE Boot With intel Based IMAC

Hello,
I am trying to boot my IMAC from the network with PXE Boot with no success.
I found some documents (very little) about how to boot mac from network using diffrent mac with app called netboot, but i assume that because my imac is intel based it should be able to boot from PXE.
Are there any documents information you could point me to ?
Thanks.

U.S. websites for those companies don't show those models on their product lists or at support. If your iMac recognizes your printer, don't worry about the driver, it's there.

Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Hi
Bit of a wierd scenario this but I'm doing a bit of a lab experiment kind of thing. The setup is as follows:
VMWare Workstation 10 with Windows Server 2012 R2 running as a virtual machine. In VMW10 I have a NAT network interface and a Bridging interface set to load with the virtual machine. These seem to work fine (although the NAT doesn't seem to want to connect
to the internet but that's why the bridging one is there in addition).
Server 2012 is configured with the following roles:
ADDS, DHCP, DNS, Hyper-V, Printer, WDS
I have correctly configured WDS to work on the same machine as DHCP and I can get PXE boot working with WDS on a Type1 Virtual Machine in Hyper-V using the Legacy Network adapter. My problem is when I try and PXE boot on a Type2 Virtual Machine (this type
is new in R2 and should eliminate the need for a legacy network adapter) using the same network interface that I used for the Type1 machine, I get an IP address from DHCP but WDS doesn't seem to respond. Instead I get the "PXE-E16: No Offer Received"
message. I have tried just about everything I can think of and spent the whole day trying to figure out why this is the case but came up with nothing. Has anyone else encountered this or can anyone shed any light on the matter?
Many thanks in advance

"VMWare Workstation 10 with Windows Server 2012 R2"and "Server 2012 is configured with the following roles: ADDS, DHCP, DNS, Hyper-V, Printer, WDS"
Hyper-V is not supported to be run as a VM. It is a Type 1 hypervisor, which means it works on the bare metal. You have it running as a VM on a Type-2 hypervisor, so it has no access to the bare metal. Yes, VMware may have made it so some
things work in that environment, but it is not a supported (or tested) environment for Hyper-V.
.:|:.:|:. tim

Server 2008 configured for PXE boot with UIU and GhostCast

Right now, I am in the process of switching over from UIU 4, to UIU 5, and the implementation is completely different. We used GhostCast to push images out before, but the new UIU uses WIM files to pull the drivers off the server. I had a few
questions about reconfiguring the new server.
Currently, we have a server 2003 machine running ghost cast. It pulls its images off of a server 2008 machine. The server 2008 machine can be accessed remotely. So my first question is, can this be configured to allow remote connections
with the new setup?
The things I have been reading have said that you need to enable DNS, AD, and DHCP, however if we connect this to a WAN, will it conflict with that? Or can we configure only one of the ethernet ports to see this? Sorry kind of new to this.
I guess my main concern is, can we set up a separate domain for GhostCasting, while still being connected to an external domain?

Hi,
I’m not sure what you really want to do. For PXE boot, I think DHCP is always required just like Microsoft deployment solution WDS and MDT.
The two products are third products, so I don’t know the detail information about how they work. Based on my experience, they should be based on broadcast or multicast.
If so it could be a bad idea if you install it on a server facing the internet.
I think you can also ask in the third party forums that provide the products.
Thanks for understanding.

Unable to boot with UEFI by bootable windows 8.1 DVD

Hi guysUnfortunately when I want to install windows with UEFI from bios, there is no choice for choosing boot from DVD, while my DVD is bootable and it is in my DVD Rom. On the other, by changing UEFI to Legacy support, it can recognize my bootable DVD of windows 8.1. I really cant understand what is the problem. Please help to install new windows through UEFI (((((((((Thanks

I think this is a problem with new laptops (as far as I know), you cannot boot into UEFI using DVD.
(Try disabling / enabling SecureBoot but I dont think that will help either)
You can however create a bootable USB and boot into UEFI.

Is anyone else having an issue with iPhone 4 not sending iMessages?

Our iPhone 4S will not send iMessages now, only text messages. It may have happened in the latest update.

No problems here.
Edit...
My IOS-7 is on an iPod Touch.

E7250 will not PXE Boot with SCCM 2012 R2

Just received our new version Dell laptop the E7250. We are using SCCM 2012 R2 OSD to build our computers. We currently have 6 Dell computers (2 desktops 7010 and 790 and 4 laptops 6410, 6420, 6430 and 5440) that are using the same WIM file. Never had a problem with the network drivers until now with the E7250. It loads the WIM file but as soon as it says "preparing network connection" it fails. I hit F8 and try an IPCONFIG and I don;t see an IP address. So I'm thinking Network Driver issue, so I add the network driver to the Boot image and still can't get past "Preparing Network Connections". Any ideas?
Thanks

I got the same issue, both the Dell and Intel drivers only have Intel L217-LM drivers, the Latitude E7250s I've got need L218-LM drivers. I've tried older versions of the family driver package from Intel, but no good.
Perhaps its not the driver packages but rather SCCM 2012 R2 that doesn't pick up the 218 drivers in the packages, but I'm stuck.

Linux-3.10.10 fails silently when booting with UEFI

This problem has occured for me on several occasions in the past (with 3.10.2 and 3.10.8) but that has been with kernels in [testing]. With 3.10.10 dropping to [core], this is the first time this has happened for me with an official release.
Though the linked-to thread is marked as "Solved", the only solution found was downgrading and waiting for a new kernel to be released that did not have the issue (3.10.3 and 3.10.9). I am using UEFI with gummiboot, but I have no idea why this is happening (and since the boot fails silently it's rather difficult for me to provide helpful logs). Is anyone else experiencing this issue? Have you found any workable solution that isn't just waiting? Can anyone else guide me in some troubleshooting?
All the best,
-HG

srs5694 wrote:
Booting directly from the firmware and via gummiboot are basically the same, in the sense that they both rely on the EFI stub loader. The problem under discussion in the thread to which I linked appears to be a bug in the EFI stub loader that interacts with the firmware version -- it affects many Lenovo computers, but few others. It appears when using the EFI stub loader directly, from rEFInd, or from gummiboot; but it's a highly inconsistent bug. It can go away by switching from gummiboot to rEFInd, from rEFInd to gummiboot, from one version of rEFInd to another, from either of these to a direct boot from the firmware, etc. It also comes and goes with the exact kernel version, with different people reporting problems with different kernels.
As I said, there's no real fix. The precise cause hasn't been nailed down; if it had been, chances are there'd be a fix by now.
Fascinating. I wonder what's going wrong with it.
If SYSLINUX is getting you further into the boot process, then I recommend you try to debug what's happening with SYSLINUX. Try posting details of any error messages you see.
Fair enough. Then, here's my plan. Given that this thread appears to be a duplicate of the thread srs5694 linked to, it should probably either be merged in or closed (I don't necessarily have any preference, and since there has been no new discovery made in it, it doesn't seem as though there is any inherent advantage one way or another). And, I will shortly open a new thread on troubleshooting syslinux.
Thank you for your guidance srs! You've been a huge help.
All the best,
-HG

Exchange 2013 co-existence with 2007 can not send from 2013 - receives OK

2013 SP1 -separate servers for MBX and CAS - 4 of each. Exchange 2007 configured as a CCR
I am in co-existence mode but have not yet switched on the legacy.domainname.com. I have a new certificate installed on all servers - 2007 and 2013 with the legacy namespace included
I can receive on the exchange 2013 servers and can send to exchange 2013 users but cannot send to 2007 users or externally. I have enabled protocol logging and I'm seeing:
2014-04-02T00:57:31.476Z,Outbound Primary,08D1120CF8FEEDBA,0,,10.0.9.1:25,*,,attempting to connect
2014-04-02T00:57:52.521Z,Outbound Primary,08D1120CF8FEEDBA,1,,10.0.9.1:25,*,,"Failed to connect. Winsock error code: 10060, Win32 error code: 10060, Error Message: A connection attempt failed because the connected party did not properly respond after a
period of time, or established connection failed because connected host has failed to respond 10.0.9.1:25"
The client has a pair of Axway mailgateway appliances (Tumbleweed). We can Telnet between the exchange 2013 servers and the Axways. There is a firewall between these mail gateways and the exchange servers and the following ports were opened - 25,443,465,995,110
I used the existing send connectors from 2007 and just added the mailbox servers to them. I created 2 new receive connectors to match 2 specialist 2007 connectors.
But I still can't send mail. Any suggestions where next to check?

Hi Tony
Based on the protocol logs error looks like there is connectivity problem between Ex2007 and Ex2013
First you can try dropping an email through Telnet from Exchange 2013 to Exchange 2007 to see the message failure happens at which transit.
You can add the IP address of Exchange 2013 in Exchange 2007 default receive connector and vice versa.
Restart the transport service and try sending an email from exchange 2013 to Exchange 2007 and see the results
Also you can try creating a dedicated receive connector for Exchange 2007 in Exchange 2013 and vice versa if the above step does not work
Also try disabling the firewall and see if it helps.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Create Project trough enterprise project type with templates does not send notification to team member(email) when published

Hi All,
I encountered this issue in my client site when implementing project server 2013.
At First I thought that this issue occurred intermittently , sometimes project creation (create project from PWA- assign resources with team member -save and publish) trigger email notification to the assigned team member and sometimes not. (new task notification)
I have checked with our infrastructure team and verify that I use the right SMTP server address and port , and cross check with them for their side configuration (exchange) , we did not find anything wrong on both settings.
and then we found out that the failed notification email comes from project creation using defined project templates in an enterprise project type, even from a project that consist of template schedule , we added new task on that project and assign a team
member on that task that resulted with notification sent to the team member, but not with task that comes from templates.
can someone help us on this issue, or is there any CU on this?
I appreciate any comments and feedback, Thanks for your attention!
Regards,
Nugroho
EPM implementator

Kirteshtiw,
Yes we did create the template from project professional and as far as i know,
the only way to create template is just to save it, no option to publish the template.
When you create a new project from template for some of the task you remove the resources then assign resource to those tasks then save and publish the project.
<--there are no resources assigned from the template, when i assign resources (new assignment) this will not trigger notification
Or create a new task under summary task assign resource then save and publish the task you notification sent to the resource means it is working.
<--new task (not from template ) also trigger the notification

Anyone have any solution to problems with iphone 3G not sending or receiving email after the recent upgrade?

Uprgaed yesterday & now can't send or receive emails.
My account is set up using mobile me and was working fine until I installed the recent upgrade last night.
It doesn't make any difference if I have wi-fi enabled or disabled.
I have checked the stmp and inputted all the correct info i.e. username/password. No joy.
Very, very frustrating

try deleting the account and re-adding it.

Mail with jpg attachments not sending

I've tried repeatedly sending jpg photos in Mail, but they are never successfully sent. The Send icon keeps spinning and spinning and never stops. I end up having to go into the Outbox and deleting the message, then doing a Force Quit Mail before I can reopen Mail. This is something new since updating to Lion.

Hmm that sounds convenient.
Maybe try Attachment tamer, a Mail plug-in, and see if you can tweek a work around. A few bugs in Mail.
http://lokiware.info/Attachment-Tamer

PXE Boot with UEFI. WDS not sending WinPE wim

Similar Messages

Maybe you are looking for