PXIe-8101 Unable To Compile Code
Hello,
My system is a PXIe-1065 chassis (I've also had the same issue in the PXIe-1082 chassis), PXIe-8101 controller with Windows 7 installed by NI, and the following instruments:
DMM PXI-4071, Power Supply PXI-4110, DAQ PXIe-6356, Timing Card PXIe-6674T, and Motion Control PXI-7332.
I also have a PXIe-8361 which I will use on occasion and will be what I use in the long term.
Now for the actual problem. What happens is I'll put together some code in labview using the instrument driver VI's and everything will work fine. I can make VI's that call subVI's that call the instrument VI's and it works great, but if I double click on an instruments VI and then try to look at the block diagram, for example, opening "DAQmx Create Channel (AI-Voltage-Basic).vi" it seems to break the code. Initially it won't say anything but once I hit the run button the arrow will change to the broken gray arrow and will state that the code failed to compile (this is without actually changing anything with the VI, I open it and look at what it is doing).
Also any code I've written that called that VI will now get the same error, if I click show error it will bring up whatever window I was looking at last, so if I was looking at the front panel, then clicked show error it would just bring up the front panel again without highlighting anything. If I create a new file and build a small vi that uses the instrument drivers it works fine, if I copy the vi's from the broken code and paste it into the new file it will fail with the same error.
It doesn't have this behavior with all the instrument VI's but will happen with some. I mentioned it happens with "DAQmx Create Channel (AI-Voltage-Basic).vi" but then it doesn't happen with "DAQmx Timing(Sample Clock).vi". I haven't gone through and checked exactly which VI's it happens with but it seems to happen with other instruments drivers as well, not just for the DAQ. It also only seems to happen when using the PXIe-8101. If I connect it to a computer this issue doesn't pop up. My company primarily controls the chassis using MXI cards so we don't have any available embedded controllers I could swap in to see if it still happens.
It's not a big issue as looking into the instrument vi's isn't necessary for me to do my job, I just do it to try to better understand what exactly is happening but it is something I'm curious about.
DISCLAIMER: I'm a hardware engineer so I may not be familiar with some concepts/terminology/best practices so... patience is appreciated
Solved!
Go to Solution.
At the time I first noticed this error I was just starting to use labview, so I simply avoided opening that vi, now I've been working with labview for about 9 months. I haven't been working with it consistently, not all my projects require it, but I would say I've spent at least half my time working with it.
Well I seem to have recorded it slightly off. So when I looked into the DAQmx vi it gave an error and when I clicked show details it gave the following:
When I tried to exit it asked me if I wanted to save the changes, I chose defer decision and eventually chose do not save. I closed labview and reopened the VI, tried to run it and it gave the error:
I selected show error and it gave:
Then where it said it failed to compile was within another vi in the same project. When I first opened it it said SubVI is not executable. When I clicked show error it took me to a VI that had the DAQmx vi in it and it was saying VI failed to compile.
I've attached the SubVI from which I opened the DAQmx. It's a basic vi to read analog data. Is that what you meant for screenshots?
DISCLAIMER: I'm a hardware engineer so I may not be familiar with some concepts/terminology/best practices so... patience is appreciated
Attachments:
DAQaread.vi 27 KB
Similar Messages
-
Unable to compile code referencing GV$AQ view
I am unable to compile code which has a select from the view GV$AQ. I have the AQ_ADMINISTRATOR_ROLE granted for myself, but this isn't being granted to the stored procedure. How do I go about granting select privileges on the GV$AQ view? My attempt follows:
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.0.1.1.0 - 64bit Production
PL/SQL Release 9.0.1.1.0 - Production
CORE 9.0.1.1.0 Production
TNS for Solaris: Version 9.0.1.1.0 - Production
NLSRTL Version 9.0.1.1.0 - Production
SQL> @queue_statistics_s
Package created.
SQL> @queue_statistics_b
Warning: Package Body created with compilation errors.
SQL> sho err
Errors for PACKAGE BODY QUEUE_STATISTICS:
LINE/COL ERROR
814/9 PL/SQL: SQL Statement ignored
821/16 PL/SQL: ORA-00942: table or view does not exist
SQL> l 813 824
813 -- Query the statistics view
814 SELECT v.waiting
815 ,v.ready
816 ,v.expired
817 INTO p_waiting
818 ,p_ready
819 ,p_expired
820 FROM dba_queues q
821 ,GV$AQ v
822 WHERE v.qid = q.qid
823 AND q.name = UPPER(p_q_name);
824*
SQL> SELECT v.waiting
2 ,v.ready
3 ,v.expired
4 FROM dba_queues q
5 ,GV$AQ v
6 WHERE v.qid = q.qid
7 AND q.name = UPPER ('test_queue');
WAITING READY EXPIRED
0 7 0
SQL> connect system
Enter password:
Connected.
SQL> grant select on gv$aq to queue_user;
grant select on gv$aq to queue_user
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> grant select on dba_queues to queue_user;
grant select on dba_queues to queue_user
ERROR at line 1:
ORA-01031: insufficient privileges
SQL>manyal wrote:
You are right, if we are giving priviledges explicitly , it works .
can't we do anything else because in this way at start of the financial year we have to grant so many explicitly priviledges .Yes, don't create database objects that are named based on data (e.g. names with months and years in them).
Data should be inside the table and not used to distinguish the table. -
Unable to compile class for JSP
Please can anyone help me to solve this.
Actually,this is the condition.
In my db,there is a table called UserPassword, which has 4
fields(empNo,UserName,password,level). Now I want to do these things:
When the user submits the data to create a new account via HTML form, it submits the data to the file called CreateAcc.jsp. In this file it perform some logic,here are they.
1)To check the empNo,if it is already exist in the DB,
if empNo =exist then display error.(record already exist)
if empNo =notexist then do task 2).
2)check the UserName,if it is already exist in the db,
if UserName=exist then display error.(because it's a primary key)
if UserName=notexist then do task 3).
3)Create a new user account and save it to the db.
To do these tasks,I never create a new objects for the tasks 1) and 2).
only for task 3)create an object.
Is it the right way?
Here is the file CreateAcc.jsp
<%@ page language="java" %>
<%@ page import="core.UserAccManager" %>
<%@ page import="data.UserPassword" %>
<jsp:useBean id="UserAccManager" class="core.UserAccManager" scope="session"/>
<jsp:setProperty name="UserAccManager" property="*"/>
<jsp:useBean id="UserPassword" class="data.UserPassword" scope="session"/>
<jsp:setProperty name="UserPassword" property="*"/>
<%
String nextPage ="MainForm.jsp";
if(UserPassword.verifyEmpno()){
if(UserPassword.verifyUsername()){
if(UserPassword.createAcc()) nextPage ="MsgAcc.jsp";
}else{
nextPage="UserNameExist.jsp";
else{
nextPage="UserAccError.jsp";
%>
<jsp:forward page="<%=nextPage%>"/>The directory structure:
UserPassword.java- F:/Project/core/data/UserPassword.java
UserAccManager.java - F:/Project/core/UserAccManager.java
Now both are compiling.I put the class files into the TOMCAT,as follows.
UserAccManager.class - webapps/mySystemName/WEB-INF/classes/core/
UserPassword.class - webapps/mySystemName/WEB-INF/classes/core/data/
Here is the full code of the file UserAccManager.java.
package core; //Is this right?
import data.UserPassword; //Is this right?
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public final class UserAccManager{
private static final String DRIVER = "com.mysql.jdbc.Driver";
private static final String URL = "jdbc:mysql://localhost:3306/superfine";
private static Connection connection;
private static PreparedStatement pstmt1;
private static PreparedStatement pstmt2;
private static PreparedStatement pstmt3;
private UserAccManager(){
// Initializes the connection and statements
public static void initConnection() {
if (connection == null) {
try {
String sql;
// Open the database
Class.forName(DRIVER).newInstance();
connection = DriverManager.getConnection(URL);
// Prepare the statements
sql = "SELECT * FROM UserPassword where empNo= ?";
pstmt1 = connection.prepareStatement(sql);
sql = "SELECT UserName FROM UserPassword where UserName= ?";
pstmt2 = connection.prepareStatement(sql);
sql ="INSERT INTO UserPassword VALUES(?,?,?,?)";
pstmt3 = connection.prepareStatement(sql);
catch (Exception ex) {
System.err.println(ex.getMessage());
// Closes the connection and statements
// Method to be called by main class when finished with DB
public void closeConnection() {
//same as previous
public static boolean verifyEmpno(int empno) {
boolean emp_no_select_ok = false;
int emp = -1;
initConnection();
try {
pstmt1.setInt(1, empno);
ResultSet rs1 = pstmt1.executeQuery();
while(rs1.next()){
emp=rs1.getInt("empNo");
if(emp>0)
emp_no_select_ok = false;
} else{
emp_no_select_ok = true;
rs1.close();
pstmt1.close();
catch (Exception ex) {
System.err.println(ex.getMessage());
return emp_no_select_ok;
public static boolean verifyUsername(String username) {
boolean user_name_select_ok = false;
String user = "xxxx";
initConnection();
try {
pstmt2.setString(1, username);
ResultSet rs2 = pstmt2.executeQuery();
while(rs2.next()){
user=rs2.getString("UserName");
if(!user.equals("xxxx"))
user_name_select_ok = false;
} else{
user_name_select_ok = true;
rs2.close();
catch (Exception ex) {
System.err.println(ex.getMessage());
return user_name_select_ok;
public static boolean createAcc(int empno, String username, String password, int
level){
boolean create_acc_ok = false;
initConnection();
try{
//create a new object,from the UserPassword table.
UserPassword useraccount = new UserPassword();
useraccount.setEmpno(empno);
useraccount.setUsername(username);
useraccount.setPassword(password);
useraccount.setLevel(level);
//assign value for ???
pstmt3.setInt(1, useraccount.getEmpno());
pstmt3.setString(2, useraccount.getUsername());
pstmt3.setString(3, useraccount.getPassword());
pstmt3.setInt(4, useraccount.getLevel());
if(pstmt3.executeUpdate()==1) create_acc_ok=true;
pstmt3.close();
//con.close();
catch(SQLException e2){
System.err.println(e2.getMessage());
return create_acc_ok;
}here is the bean (part of it)
package data; //is it right?
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class UserPassword
private int empno;
private String username;
private String password;
private int level;
// Constructor
public UserPassword()
this.empno = empno;
this.username = username;
this.password = password;
this.level = level;
// setters and getters are here.
// public boolean verifyEmpno() {
// return UserAccManager.verifyEmpno(empno);
// public boolean verifyUsername(String username) {
// return UserAccManager.verifyUsername(username);
// These 2 methods not compile with or without para's.So I leave that job for the
//controll class UserAccManager.java.
Now my problem is this: When I submit data, there is an error;org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\Program Files\Apache Group\Tomcat 4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:8:
cannot access core.data.UserPassword
bad class file: C:\Program Files\Apache Group\Tomcat
4.1\webapps\HRM\WEB-INF\classes\core\data\UserPassword.class
class file contains wrong class: data.UserPassword
Please remove or make sure it appears in the correct subdirectory of the classpath.
import core.data.UserPassword;
^
1 error
Are there any mistakes? If so tell me where is it and how to change them.Please help.I try it that way, but it don't compile.
Error:core\data\UserPassword.java:package javax.servlet does not exist
import javax.servlet.*;
core\data\UserPassword.java:package javax.servlet.http does not exist
import javax.servlet.http.*;
So,I comment them only in the UserPassword.java file,and compile it again.
Then it compile well.I goto the directory to get the .class files.
But there is only UserPassword.class inside the data folder. There is not
UserAccManager.class in the core folder.
Then I try this way,I put my 2 java files in to a new folder,
F:\SystemName\com
When I try it that way, but it don't compile.
javac -classpath . -d . com\*.javaError:com\UserPassword.java:package javax.servlet does not exist
import javax.servlet.*;
com\UserPassword.java:package javax.servlet.http does not exist
import javax.servlet.http.*;
So,I comment them only in the UserPassword.java file,and compile it again.
Now both are compiling well.There was 2 class files.
I put them in to the WEB-INF/classes/com directory.
Start the server.But it gave errors:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:68: cannot resolve symbol
symbol : variable empno
location: class org.apache.jsp.CreateAcc_jsp
if(UserPassword.verifyEmpno(empno)){
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:69: cannot resolve symbol
symbol : variable username
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.verifyUsername(username)){
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:69: non-static method
verifyUsername(java.lang.String) cannot be referenced from a static context
if(UserAccManager.verifyUsername(username)){
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable empno
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable username
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable password
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable level
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: non-static method
createAcc(int,java.lang.String,java.lang.String,int) cannot be referenced from a static
context
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
8 errorsTo solve the problem non-static method,I goto the UserAccManager.java file and do these
things.
package com;
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.sql.*;
//import javax.servlet.*; //otherwise it tells an error.(package
//javax.servlet does not exist)
//import javax.servlet.http.*;
public class UserAccManager {
private static final String DRIVER = "com.mysql.jdbc.Driver";
private static final String URL = "jdbc:mysql://localhost:3306/superfine";
private static Connection connection;
private static PreparedStatement pstmt1;
private static PreparedStatement pstmt2;
private static PreparedStatement pstmt3;
private UserAccManager() {
// Initializes the connection and statements
private static void initConnection() {
//same
// Closes the connection and statements
// Method to be called by main class when finished with DB
public static void closeConnection() {
//same
public static boolean verifyEmpno(int empno) {
// same.
public static boolean verifyUsername(String username) {
//same.
public static boolean createAcc(int empno, String username, String password, int
level){
//same
package com;
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.sql.*;
//import javax.servlet.*;
//import javax.servlet.http.*;
public class UserPassword {
// same
Again compile those files and put .class filses into the WEB-INF/classes/com directory.
When i submits the data via the form it generates an error:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
[javac] Compiling 1 source file
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:68: cannot resolve symbol
symbol : variable empno
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.verifyEmpno(empno)){
^
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:69: cannot resolve symbol
symbol : variable username
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.verifyUsername(username)){
^
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable empno
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable username
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable password
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
An error occurred at line: 9 in the jsp file: /CreateAcc.jsp
Generated servlet error:
C:\Program Files\Apache Group\Tomcat
4.1\work\Standalone\localhost\HRM\CreateAcc_jsp.java:70: cannot resolve symbol
symbol : variable level
location: class org.apache.jsp.CreateAcc_jsp
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
^
6 errorshere is the CreateAcc.jsp file
<%@ page language="java" %>
<%@ page import="com.UserAccManager" %>
<%@ page import="com.UserPassword" %>
<jsp:useBean id="userPassword" class="com.UserPassword" scope="request"/>
<jsp:setProperty name="userPassword" property="*" />
<%
String nextPage ="MainForm.jsp";
if(UserAccManager.verifyEmpno(empno)){
if(UserAccManager.verifyUsername(username)){
if(UserAccManager.createAcc(empno, username,password,level)) nextPage
="MsgAcc.jsp";
}else{
nextPage="UserNameExist.jsp";
else{
nextPage="UserAccError.jsp";
%>
<jsp:forward page="<%=nextPage%>"/>Please, anyone know how to send these parameters to the java file.
Thanks. -
Error during distribution for compiled code generation-Reply
Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a® -
Unable to compile the java class in the SQL PLUS
Hi Team,
I am unable to compile the java class in the SQL PLUS in dev1 and dev2. It is giving the following error.
But the same class get Compiled in the Toad(Tool) without any error and working fine. Could someone help me
What to do for this for your reference ,Attaching the java class file.
“ORA-29536: badly formed source: Encountered "<EOF>" at line 1, column 28.
Was expecting one of:
----------------------Here is the Java class Code.....................
create or replace and compile java source named "XXVM_ZipFileUtil_Ela"
as
import java.math.BigDecimal;
import java.util.zip.Deflater;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
import oracle.sql.*;
import oracle.jdbc.*;
import java.sql.*;
import java.io.*;
public class XXVM_ZipFileUtil_Ela
public static oracle.sql.BLOB getZipFile(
oracle.sql.CHAR zipFilePathCHAR, oracle.sql.CHAR zipFileNameCHAR,
int fileBufferSize, int zipFileBufferSize,
boolean deleteZipFile, java.sql.Array fileNames, java.sql.Array fileContents, java.sql.Array fileContentsLength)
throws IllegalArgumentException, FileNotFoundException, IOException, java.sql.SQLException
String zipFilePath = (zipFilePathCHAR == null) ? null : zipFilePathCHAR.stringValue();
String zipFileName = (zipFileNameCHAR == null) ? null : zipFileNameCHAR.stringValue();
String zipPathAndFileName = new String(
new String(zipFilePath == null || zipFilePath == "" ? "/tmp/" : zipFilePath) +
new String(zipFileName == null || zipFileName == "" ? System.currentTimeMillis() + ".zip" : zipFileName));
byte[] buffer = new byte[fileBufferSize == 0 ? 100000000 : fileBufferSize];
try
Connection conn = DriverManager.getConnection("jdbc:default:connection:");
oracle.sql.CLOB[] fileContentsCLOB = (oracle.sql.CLOB[])fileContents.getArray();
String[] fileNamesString = (String[])fileNames.getArray();
BigDecimal[] fileContentsLengthNumber = (BigDecimal[])fileContentsLength.getArray();
ZipOutputStream zipOut = new ZipOutputStream(new FileOutputStream(zipPathAndFileName));
zipOut.setLevel(Deflater.DEFAULT_COMPRESSION);
for (int i = 0; i < fileNamesString.length; i++) {
System.out.println(i);
zipOut.putNextEntry(new ZipEntry(fileNamesString));
InputStream asciiStream = fileContentsCLOB[i].getAsciiStream(1L);
int asciiReadCount = asciiStream.read(buffer,0,fileContentsLengthNumber[i].intValue());
zipOut.write(buffer, 0, fileContentsLengthNumber[i].intValue());
zipOut.closeEntry();
zipOut.close();
byte zipFileContents[] = new byte[zipFileBufferSize == 0 ? 100000000 : zipFileBufferSize];
FileInputStream zipIn = new FileInputStream(zipPathAndFileName);
int byteCount = zipIn.read(zipFileContents);
zipIn.close();
byte returnFileContents[] = new byte[byteCount];
System.arraycopy(zipFileContents,0,returnFileContents,0,byteCount);
String returnFileContentsString = new String(returnFileContents);
if (deleteZipFile)
boolean deletedFile = (new File(zipPathAndFileName)).delete();
oracle.sql.BLOB returnFileContentsBLOB = null;
returnFileContentsBLOB = BLOB.createTemporary(conn, true, BLOB.DURATION_SESSION);
returnFileContentsBLOB.open(BLOB.MODE_READWRITE);
//OutputStream tempBlobWriter = returnFileContentsBLOB.getBinaryOutputStream();
OutputStream tempBlobWriter = returnFileContentsBLOB.setBinaryStream(1);
tempBlobWriter.write(returnFileContents);
tempBlobWriter.flush();
tempBlobWriter.close();
returnFileContentsBLOB.close();
return returnFileContentsBLOB;
catch (IllegalArgumentException ex) {
ex.printStackTrace();
throw ex;
catch (FileNotFoundException ex) {
ex.printStackTrace();
throw ex;
catch (IOException ex)
ex.printStackTrace();
throw ex;
catch (java.sql.SQLException ex)
ex.printStackTrace();
throw ex;860411 wrote:
Hi Team,
I am unable to compile the java class in the SQL PLUS in dev1 and dev2. It is giving the following error.
But the same class get Compiled in the Toad(Tool) without any error and working fine. Could someone help me
What to do for this for your reference ,Attaching the java class file.
“ORA-29536: badly formed source: Encountered "<EOF>" at line 1, column 28.
Was expecting one of:
I believe the error message is clear and self-explanatory.
----------------------Here is the Java class Code.....................
create or replace and compile java source named "XXVM_ZipFileUtil_Ela"
as
import java.math.BigDecimal;
import java.util.zip.Deflater;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
import oracle.sql.*;
import oracle.jdbc.*;
import java.sql.*;
import java.io.*;
public class XXVM_ZipFileUtil_Ela
public static oracle.sql.BLOB getZipFile(
oracle.sql.CHAR zipFilePathCHAR, oracle.sql.CHAR zipFileNameCHAR,
int fileBufferSize, int zipFileBufferSize,
boolean deleteZipFile, java.sql.Array fileNames, java.sql.Array fileContents, java.sql.Array fileContentsLength)
throws IllegalArgumentException, FileNotFoundException, IOException, java.sql.SQLException
String zipFilePath = (zipFilePathCHAR == null) ? null : zipFilePathCHAR.stringValue();
String zipFileName = (zipFileNameCHAR == null) ? null : zipFileNameCHAR.stringValue();
String zipPathAndFileName = new String(
new String(zipFilePath == null || zipFilePath == "" ? "/tmp/" : zipFilePath) +
new String(zipFileName == null || zipFileName == "" ? System.currentTimeMillis() + ".zip" : zipFileName));
byte[] buffer = new byte[fileBufferSize == 0 ? 100000000 : fileBufferSize];
try
Connection conn = DriverManager.getConnection("jdbc:default:connection:");
oracle.sql.CLOB[] fileContentsCLOB = (oracle.sql.CLOB[])fileContents.getArray();
String[] fileNamesString = (String[])fileNames.getArray();
BigDecimal[] fileContentsLengthNumber = (BigDecimal[])fileContentsLength.getArray();
ZipOutputStream zipOut = new ZipOutputStream(new FileOutputStream(zipPathAndFileName));
zipOut.setLevel(Deflater.DEFAULT_COMPRESSION);
for (int i = 0; i < fileNamesString.length; i++) {
System.out.println(i);
zipOut.putNextEntry(new ZipEntry(fileNamesString));
InputStream asciiStream = fileContentsCLOB[i].getAsciiStream(1L);
int asciiReadCount = asciiStream.read(buffer,0,fileContentsLengthNumber[i].intValue());
zipOut.write(buffer, 0, fileContentsLengthNumber[i].intValue());
zipOut.closeEntry();
zipOut.close();
byte zipFileContents[] = new byte[zipFileBufferSize == 0 ? 100000000 : zipFileBufferSize];
FileInputStream zipIn = new FileInputStream(zipPathAndFileName);
int byteCount = zipIn.read(zipFileContents);
zipIn.close();
byte returnFileContents[] = new byte[byteCount];
System.arraycopy(zipFileContents,0,returnFileContents,0,byteCount);
String returnFileContentsString = new String(returnFileContents);
if (deleteZipFile)
boolean deletedFile = (new File(zipPathAndFileName)).delete();
oracle.sql.BLOB returnFileContentsBLOB = null;
returnFileContentsBLOB = BLOB.createTemporary(conn, true, BLOB.DURATION_SESSION);
returnFileContentsBLOB.open(BLOB.MODE_READWRITE);
//OutputStream tempBlobWriter = returnFileContentsBLOB.getBinaryOutputStream();
OutputStream tempBlobWriter = returnFileContentsBLOB.setBinaryStream(1);
tempBlobWriter.write(returnFileContents);
tempBlobWriter.flush();
tempBlobWriter.close();
returnFileContentsBLOB.close();
return returnFileContentsBLOB;
catch (IllegalArgumentException ex) {
ex.printStackTrace();
throw ex;
catch (FileNotFoundException ex) {
ex.printStackTrace();
throw ex;
catch (IOException ex)
ex.printStackTrace();
throw ex;
catch (java.sql.SQLException ex)
ex.printStackTrace();
throw ex;
The last two lines above should be
/Srini -
Tomcat 4.1 Bean error (Unable to compile class for JSP)
Help,
I am using Tomcat 4.1 with with JDK1.3.1_01. I have a JSP page in which I try to use a Bean, but I get the following error from Tomcat.
The JSP page is very simple. I am using package names in the import statement. Code below.
I've put the class files under
<TOMCAT>\webapps\projectname\WEB-INF\classes under the appropriate packages. What else is missing? I can not figure out what I am doing wrong.
***************** START JSP CODE *********************
<html>
<head>
<title>User Information</title>
</head>
<%@ page session="true" %>
<%@ page import="com.xxx.yyy.data.*" %>
<body>
<P> </P>
<P> </P>
<P> </P>
<!--
<jsp:useBean id="user" class="com.xxx.yyy.data.User" scope="session"/>
-->
<%
User user = (User) session.getAttribute("user");
%>
UserID = <%= user.getUserID() %><BR>
User Name = <%= user.getUserName() %><BR>
Password = <%= user.getPassword() %><BR>
Password Hint = <%= user.getPasswordHint() %><BR>
</body>
</html>
***************** END JSP CODE *********************
***************** START TOMCAT ERROR MESSAGE *********************
org.apache.jasper.JasperException: Unable to compile class for JSP
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:477)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:182)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2397)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:171)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:536)
root cause
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 20 in the jsp file: /userInfo.jsp
Generated servlet error:
[javac] Compiling 1 source file
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:7: package com.xxx.yyy.data does not exist
import com.xxx.yyy.data.*;
^
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:61: package com.xxx.yyy.data does not exist
com.xxx.yyy.data.User user = null;
^
An error occurred at line: 20 in the jsp file: /userInfo.jsp
Generated servlet error:
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:63: package com.xxx.yyy.data does not exist
user = (com.xxx.yyy.data.User) pageContext.getAttribute("user", PageContext.SESSION_SCOPE);
^
An error occurred at line: 20 in the jsp file: /userInfo.jsp
Generated servlet error:
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:66: package com.xxx.yyy.data does not exist
user = (com.xxx.yyy.data.User) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "com.xxx.yyy.data.User");
^
An error occurred at line: 25 in the jsp file: /userInfo.jsp
Generated servlet error:
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:77: cannot resolve symbol
symbol : class User
location: class org.apache.jsp.userInfo_jsp
User user = (User) session.getAttribute("user");
^
An error occurred at line: 25 in the jsp file: /userInfo.jsp
Generated servlet error:
D:\Apache_Group\Tomcat_4.1\work\Standalone\localhost\PALBO\userInfo_jsp.java:77: cannot resolve symbol
symbol : class User
location: class org.apache.jsp.userInfo_jsp
User user = (User) session.getAttribute("user");
^
6 errors
at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:120)
at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:315)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:326)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:474)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:182)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2397)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:171)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:536)
***************** END TOMCAT ERROR MESSAGE *********************Hi
I am running my Tomcat apps (on a Windows dev machine) in an alternate location (ie. not default webapps). The same crap comes to me every time. Unable to install etc. I have tried every trick in the book regarding classpath settings etc.
When I use 'javap' to check the classpath from any location on my machine, its works and javap returns the signature of my class.
When I use it though Tomcat (with the import set to include the filename), it get the error. I have heard rumors that using JDK 1.3 in stead of 1.4 helps, but I just want it to work with 1.4 :)
So if any of you can help me on this, please.
PS. On my linux server it works just fine, as does every other thing on that machine ;)
Chris (chris.schuit <at> euronet.nl) -
Release 12.0.4 "ego" pages: unable to compile standard .java
Hi All,
I have downloaded all the necessary files and was able to build a local copy of particular set of pages. I even ran those pages in my local setup.
Then to understnad the flow I decompiled few controller CLASS files using JAD. Now I am unable to compile the java files (i have just added few System.out.println's) .
I get errors for the following piece of standard code:
oaapplicationmodule.invokeMethod("getTrainStationsContent", new Serializable[] {
key
, new Class[] {
oracle/jbo/Key ---> Cause of error
I also tried rephrasing "oracle/jbo/Key" as "(Class)oracle.jbo.Key" but no luck.
The error which is displayed is
Error(732,13): field oracle not found in class oracle.apps.ego.item.eu.webui.EgoCreateItemPageLayoutCO
Error(732,20): field jbo not found in class oracle.apps.ego.item.eu.webui.EgoCreateItemPageLayoutCO
Error(732,24): field Key not found in class oracle.apps.ego.item.eu.webui.EgoCreateItemPageLayoutCO
I have checked the import section and it looks fine to me.
Please let me know if any of you have faced this issue before? Am a bit lost here.
Thanks in advance.,
JayI tried with almost every other decompiler available... but nothing resolves this issue. Please let me know if you have anyother alternative.
Thanks again! -
Using javabean in tomcat(unable to compile class)
Hello, I am using jakarta-tomcat-5.0.28, OS:WinXP
I am getting the following error when i use javabean in tomcat (the example is executed just fine in another web server:Blazix)
I am very new to this (JSP, Servlets and tomcat) so any help would be greatly appreciate.
THE ERROR IS:
==============================================================
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /SaveName.jsp
Generated servlet error:
C:\Programs\internet\jakarta-tomcat-5.0.28\work\Catalina\localhost\JSPSession\org\apache\jsp\SaveName_jsp.java:42: cannot resolve symbol
symbol : class UserData
location: class org.apache.jsp.SaveName_jsp
UserData user = null;
^
An error occurred at line: 1 in the jsp file: /SaveName.jsp
Generated servlet error:
C:\Programs\internet\jakarta-tomcat-5.0.28\work\Catalina\localhost\JSPSession\org\apache\jsp\SaveName_jsp.java:44: cannot resolve symbol
symbol : class UserData
location: class org.apache.jsp.SaveName_jsp
user = (UserData) jspxpage_context.getAttribute("user", PageContext.SESSION_SCOPE);
^
An error occurred at line: 1 in the jsp file: /SaveName.jsp
Generated servlet error:
C:\Programs\internet\jakarta-tomcat-5.0.28\work\Catalina\localhost\JSPSession\org\apache\jsp\SaveName_jsp.java:46: cannot resolve symbol
symbol : class UserData
location: class org.apache.jsp.SaveName_jsp
user = new UserData();
^
3 errors
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:332)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:412)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
===============================================================
ERROR END
I use the folowing files:
GetName.html
SaveName.jsp
NextPage.jsp
UserData.java
My Dir Structure is:
/JSPSession
GetName.html
SaveName.jsp
NextPage.jsp
/WEB-INF
/classes
UserData.java
UserData.class
/libThe Code for the files is:
GetName.html
<HTML>
<BODY>
<FORM METHOD=POST ACTION="SaveName.jsp">
What's your name? <INPUT TYPE=TEXT NAME=username SIZE=20><BR>
What's your e-mail address? <INPUT TYPE=TEXT NAME=email SIZE=20><BR>
What's your age? <INPUT TYPE=TEXT NAME=age SIZE=4>
<P><INPUT TYPE=SUBMIT>
</FORM>
</BODY>
</HTML>---------------------------------------------------------------------------------------------------
SaveName.jsp
<jsp:useBean id="user" class="UserData" scope="session"/>
<jsp:setProperty name="user" property="*"/>
<HTML>
<BODY>
<A HREF="NextPage.jsp">Continue</A>
</BODY>
</HTML>-----------------------------------------------------------------------------------------------------
NextPage.jsp
<jsp:useBean id="user" class="UserData" scope="session"/>
<HTML>
<BODY>
You entered<BR>
Name: <%= user.getUsername() %><BR>
Email: <%= user.getEmail() %><BR>
Age: <%= user.getAge() %><BR>
</BODY>
</HTML>------------------------------------------------------------------------------------------------------------
UserData.java
public class UserData {
String username;
String email;
int age;
public void setUsername( String value ) {
username = value;
public void setEmail( String value ) {
email = value;
public void setAge( int value ) {
age = value;
public String getUsername() { return username; }
public String getEmail() { return email; }
public int getAge() { return age; }
}A very common question. Tomcat dislikes classes which are not packaged. So, add a package statement in your UserBean.java
package beans; // or something like thatand then place the compiled class file UserBean.class into WEB-INF/classes/beans.
Put the import statement into the JSP accordingly and try again.
***Annie*** -
Generated servlet error - unable to compile class for JSP - using NB5.5/SS9
I am using NB5.5 beta2 and Sun server 9.0 with JSF 1.1 - all is OK when I am creating firts JSF application - welcomeJSF.jsp page is rendered normally - but when I am adding one more jsp with JSP view and so on - then - I am getting errors in both JSF pages - both - in original welcomeJSF and the new invoice.jsp page
here is code for typical error
org.apache.jasper.JasperException: Unable to compile class for JSP
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
[javac] E:\Sun\AppServer\domains\domain1\generated\jsp\j2ee-modules\ERPSolution\org\apache\jsp\welcomeJSF_jsp.java:99: cannot find symbol
[javac] symbol : method setJspId(java.lang.String)
[javac] location: class com.sun.faces.taglib.jsf_core.ViewTag
[javac] jspxth_f_view_0.setJspId("id7");
[javac] ^
Generated servlet error:
[javac] E:\Sun\AppServer\domains\domain1\generated\jsp\j2ee-modules\ERPSolution\org\apache\jsp\welcomeJSF_jsp.java:144: cannot find symbol
[javac] symbol : method setJspId(java.lang.String)
[javac] location: class com.sun.faces.taglib.html_basic.OutputTextTag
[javac] jspxth_h_outputText_0.setJspId("id17");
[javac] ^
Generated servlet error:
[javac] E:\Sun\AppServer\domains\domain1\generated\jsp\j2ee-modules\ERPSolution\org\apache\jsp\welcomeJSF_jsp.java:145: setValue(java.lang.String) in com.sun.faces.taglib.html_basic.OutputTextTag cannot be applied to (javax.el.ValueExpression)
[javac] jspxth_h_outputText_0.setValue(org.apache.jasper.runtime.PageContextImpl.getValueExpression("Java Server Faces", (PageContext)_jspx_page_context, java.lang.Object.class, null));
[javac] ^
[javac] 3 errors
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:94)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:384)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:461)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:528)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:507)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:495)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:530)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:409)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:317)
javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:414)
com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:455)
com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:139)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:108)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:266)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:159)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
note The full stack trace of the root cause is available in the Sun Java System Application Server Platform Edition 9.0 logs.
and there is output for another error:
Generated servlet error:
[javac] E:\Sun\AppServer\domains\domain1\generated\jsp\j2ee-modules\ERPSolution\org\apache\jsp\welcomeJSF_jsp.java:144: cannot find symbol
[javac] symbol : method setJspId(java.lang.String)
[javac] location: class com.sun.faces.taglib.html_basic.OutputTextTag
[javac] jspxth_h_outputText_0.setJspId("id17");
[javac] ^
Generated servlet error:
[javac] E:\Sun\AppServer\domains\domain1\generated\jsp\j2ee-modules\ERPSolution\org\apache\jsp\welcomeJSF_jsp.java:145: setValue(java.lang.String) in com.sun.faces.taglib.html_basic.OutputTextTag cannot be applied to (javax.el.ValueExpression)
[javac] jspxth_h_outputText_0.setValue(org.apache.jasper.runtime.PageContextImpl.getValueExpression("Java Server Faces", (PageContext)_jspx_page_context, java.lang.Object.class, null));
[javac] ^
[javac] 3 errors
and here is code of my new invoice.jsp page:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<%--
The taglib directive below imports the JSTL library. If you uncomment it,
you must also add the JSTL library to the project. The Add Library... action
on Libraries node in Projects view can be used to add the JSTL 1.1 library.
--%>
<%--
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
--%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h1><h:outputText value="Java Server Faces" /></h1>
<h:inputText value="#{managerBean.currentInvoice.id}"/>
<h:inputText value="#{managerBean.currentInvoice.description}"/>
<h:inputText value="#{managerBean.currentInvoice.total}"/>
<h:commandButton value="new_invoice"
type="submit"
actionListener="#{managerBean.createNewInvoice}"/>
</body>
</f:view>and faces-config.xml file:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config>
<managed-bean>
<managed-bean-name>managerBean</managed-bean-name>
<managed-bean-class>com.brl.ERPSolution.ui.ManagerBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>managerBean was intended to be backing beans which will call the facaed beans of EJB 3.0 entity beans - but at presnet - almost empty methods are declared there:
package com.brl.ERPSolution.ui;
import javax.faces.event.ActionEvent;
import com.brl.solutions.EJB3.*;
* @author Administrator
public class ManagerBean {
protected int currentInvoiceId;
protected Invoices currentInvoice;
protected InvoicesFacade invoicesFacade;
/** Creates a new instance of ManagerBean */
public ManagerBean() {
/* business methods */
public void createNewInvoice(ActionEvent actionEvent)
invoicesFacade.create(this.currentInvoice);
public Invoices getCurrentInvoice()
return this.currentInvoice;
public void setCurrentInvoice(Invoices currentInvoice)
this.currentInvoice=currentInvoice;
}I read in one blog (actually - the only page which was returned by yahoo - so - this should be very rare error!!!) to try to use Sun server's verifier.bat - and - it reported 0 errors and 0 warning. Build was succesfull as well and also - deployment was without errors - but - above mentioned error appeared during the automatic compilation of jsp pages/servlet when newly deployed jsps are first accessed from remote browser.
So - is it possible, please, to receive some advice - what to do further? I feel that my invoice.jsp page can be with errors, - however - the original welcomeJSF.jsp should be working without errors even the erronwous JFS jsp page is added to web application.
Thans for any adice or hint in advance!!!OK - I have made 'clean and build main project' from NB menu and the deployed the resulting *.war and the error messages have disappeared... So - it seems to be bug...
-
Error:Unable to compile class for JSP
Hi all,
I am new at jsp,just started to learn a week ago :) Anyway I'm having troubles with using a compiled java class in jsp code.I use tomcat 4.1.31 and java 1.4.2.I have compiled the following programm and put the class into tomcats' webapps\ch06\WEB-INF\classes directory
public class ch06_01
public ch06_01()
public String msg()
return "Hello from JSP!";
Then I have the following jsp file in the webapps\ch06 dir as well:
<%@ page import="ch06_01" %>
<HTML>
<HEAD>
<TITLE>Using a JavaBean</TITLE>
</HEAD>
<BODY>
<H1>Using a JavaBean</H1>
<% ch06_01 messager = new ch06_01(); %>
The message is: <%= messager.msg() %>
</BODY>
</HTML>
But when I try to ran the jsp page following error occures:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\jakarta-tomcat-4.1.31\work\Standalone\localhost\ch06\ch06_02_jsp.java:7: '.' expected
import ch06_01;
^
1 error
Can anybody help me,please!I appreciate your help a lot!
Thank you verry much!
Best regards DaisyIts not a Tomcat issue per se, but a change in the J2SE.
Its been the case since the release of Java 1.4, when they disabled access to the "default" package. Quite a few of the books written before Java1.4 was released are still around, and there are endless examples around the net that no longer work as a result of this change. -
Unable to compile due to the unavailability of com.sun.rave.designtime pkg
Hi ,
I'm developing the design time jar for a custom component.
But I'm unable to compile my BeanInfo base class( which is given below) because of the unavilability of com.sun.rave.designtime package.
mport com.sun.rave.designtime.CategoryDescriptor;
import com.sun.rave.designtime.faces.FacetDescriptor;
import com.sun.rave.designtime.markup.AttributeDescriptor;
public class TypeAheadBeanInfo extends SimpleBeanInfo
In this code, the classes CategoryDescriptor;FacetDescriptor & AttributeDescriptor are in the com.sun.rave.designtime package.
I could not get this jar eventhough I searched for this jar for more than 3 hrs in the internet. So, it would be great if anybody could please help me to get this jar. PLease Help me!!!!
Thanks
RafiqueThis is just a guess...but it might be in the
openide.jar undre Creator\lib.Hmmm...on second thought take a look at the jar files under Creator Modules. Open the jars and see if you can find it there. I don't think it is in the openide.jar after giving it a quick glance. -
Setup was unable to compile the file ccmclasses.mof
First i have a access denied problem with push installation ;
MSI: Setup was unable to create the WMI namespace CCM
The error code is 80070005
MSI: Warning 25101. Setup was unable to delete WMI namespace ccm\dcm
The error code is 80070005
Installation failed with error code 1603
I've tried many actions include deleting repository directory and rebuilding dll and mof files ...
Finally i've added LOCAL SERVICE, NETWORK SERVICE, and SYSTEM accounts to Local administrators group and now there is no 80070005 error.
But i ve got a new error :)
MSI: Setup was unable to compile the file ccmclasses.mof
The error code is 8004402F
MSI: Warning 25002. Failed to delete CCM_Service_ErrorHandlerRegistration.Clsid="{0F95BCE5-2209-488a-B4BC-4396AD233C8D}" from CCM
The error code is 80041010
Installation failed with error code 1603
i ve almost 2000 clients with this situation and i think i lost my mind very soon.
Any help is appreciated.Hi Bulent,
Very glad to hear the issue resolved and thanks for sharing your experience, which can help other community members facing similar problems. Also, if you have any further concerns, please do not hesitate to let us know and we are happy to be of further
assistance.
Thanks,
Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Running DS-5 armcc compiled code (PIC) under Windows EC 2013
Hi All,
i just wanted to know if it is generally (officially) supported to run code that is compiled via the armcc (5.03) from DS-5 under Windows Embedded Compact 2013. Or if this is discouraged (reasons?).
The problem i have:
The bootloader contains some code that must be run during Windows EC Startup. So this code is loaded from the Flash, copied to RAM (reserved and commited via VirtualAlloc and marked as executable) and then the functions are called via FunctionPointers.
The code is compiled and linked as position independent and the stack base register is set accordingly before any function is called via pointer and reset when it returns.
This works in about 9 out of 10 tests without problems. But sometimes i get all sort of exceptions (Data Abort, Prefetch Abort, Unknown Instruction, ...). Most (if not all) of the time they occur when the position independent code runs on one of the two
cores.
The code runs on an i.MX6DQ (dual).
If i only enable one core, i can't reproduce the problem (i assume that multicore-handling and multithreading in WinEC 2013 Update 10 is really well tested and works without problems, so this can't be the real reason).
I've thoroughly checked and debugged the code, i'm really sure there is no illegal access or other problem with the code itself.
Could it be a problem to call code compiled via DS-5 armcc? I've compared assembler code that Visual Studio/Platform Builder generates with code that DS-5 generates (but i'm no assembler expert). I can't see any obvious special code that is added by Visual
Studio/Platform Builder (i.e. that functions need) that is not there in the DS-5 code.
Best Regards
SebastianSo I think you could be able to image some code for ROM from another compiler and without knowledge of Windows CE. However, if the code will be called from Windows CE, this becomes more difficult requiring very careful isolation from the
MMU state, processor state, kernel/user mode, etc. Code that works great when called from the bootloader might not work at all from Windows CE itself. The main problem with mixing code from different compilers is the object file format and conventions for
entry and public names. Very unlikely that you'd be able to "link" code from any other compiler with PB-compiled code.
You might think about the x86 image which can easily call BIOS from the bootloader but which can't even begin to call BIOS from CE itself. The problem isn't the compiler (which is different), but the operating environment differences and assumptions.
Paul T. -
Troublesho​oting compiled code?
I am using Fieldpont modules to control some lab tests. Since we have a few separate tests, we've decided to use compiled code to cut down on Labview costs.
The issue I'm having is when I have an error in the compiled code on a new install. Is there any way to see where in the code the error is occurring? Maybe some sort of test run mode or something? I know the code interacts with the windows registry as well as a few files on the hard drive. I think this is where the problem is. Unfortunately, I did not write the code, so I'm not certain where the problem could be. I have always been able to easily troubleshoot issues with code when running the full Labview software, but with the compiled code, you can't see the block diagram.
Any help would be greatly appreciated.
TonyHi Scubadude,
I have included a link to a help file that walks through how to debug applications on remote systems.
Debugging Applications and Shared Libraries:
http://zone.ni.com/reference/en-XX/help/371361J-01/lvhowto/debug_apps_dlls/
Wear
National Instruments
Product Support Engineer -
How to retrieve constants value from compiled code in jar file?
Hi everyone,
I've been looking for a way to solve this for a week now, without any much success... and I've finally decided to ask the Java gurus for a solution! :-)
Here's what I am basically trying to do:
I have several jar files in which there are only compiled code (.class).
In every class, there are 2 constants (declared as static final String) that I would like to retrieve (one is the version and the other the date of the last modification).
My goal is to print a list of all the classes in the jar files with the values of these 2 constants for each class.
The solution that I have right now to do this does not work properly: for now, I read all the elements of the classpath, check if these are jar files, and if so, I look into each one and load all the classes one by one and print the results.
The problem with this is that it uses the method Class.forName(className) and as some classes are unfortunately present in many jar files (2 or 3 copies), once the classes have been loaded, then it won't be "reloaded".
Without the possibility to "reload" these classes, I cannot see inconsistencies in the versions of the classes present in the jar files.
I have read many articles, and I thought that I could then use a custom classloader and create a new instance of this classloader for each jar file.
2 problems with this:
- according to many posts in the different forums I have read, the jar files should not appear in the CLASSPATH (but this would be easier for me if I could use it...)
- some classes will not be loaded if some classes (present in other jar files) are not loaded... and this makes things really really complicated to implement...
So, I thought that I was maybe doing this the wrong way, and that there might be an easy way out of this...
In fact, I do not need to load the classes... all I need to do, is take a sneak peek at the constants and print their values... and that's it!
Somehow, I think that this is possible to retrieve the values of compile time constants (declared as static final String) as I can see that with Eclipse (when opening a jar file).
So, my question is: how can I do that within my java application?
Or maybe there is another easier solution to do what I need?
Thanks in advance for your help!Hi everyone,
I've been looking for a way to solve this for a week now, without any much success... and I've finally decided to ask the Java gurus for a solution! :-)
Here's what I am basically trying to do:
I have several jar files in which there are only compiled code (.class).
In every class, there are 2 constants (declared as static final String) that I would like to retrieve (one is the version and the other the date of the last modification).
My goal is to print a list of all the classes in the jar files with the values of these 2 constants for each class.
The solution that I have right now to do this does not work properly: for now, I read all the elements of the classpath, check if these are jar files, and if so, I look into each one and load all the classes one by one and print the results.
The problem with this is that it uses the method Class.forName(className) and as some classes are unfortunately present in many jar files (2 or 3 copies), once the classes have been loaded, then it won't be "reloaded".
Without the possibility to "reload" these classes, I cannot see inconsistencies in the versions of the classes present in the jar files.
I have read many articles, and I thought that I could then use a custom classloader and create a new instance of this classloader for each jar file.
2 problems with this:
- according to many posts in the different forums I have read, the jar files should not appear in the CLASSPATH (but this would be easier for me if I could use it...)
- some classes will not be loaded if some classes (present in other jar files) are not loaded... and this makes things really really complicated to implement...
So, I thought that I was maybe doing this the wrong way, and that there might be an easy way out of this...
In fact, I do not need to load the classes... all I need to do, is take a sneak peek at the constants and print their values... and that's it!
Somehow, I think that this is possible to retrieve the values of compile time constants (declared as static final String) as I can see that with Eclipse (when opening a jar file).
So, my question is: how can I do that within my java application?
Or maybe there is another easier solution to do what I need?
Thanks in advance for your help!
Maybe you are looking for
-
When I select restart it send a report and takes me back t the crash dialog box. As such I have no way to get into Firefox. I have reloaded Firefox 7.0.1 from fresh downloads twice and still have the same issue. I've unsuccessfully looked for earlier
-
When using Airplay with Apple TV to watch a movie saved on an iPad, does this use data from your data limit with your internet provider?
-
ADF:--Error occurred during initialization of VM,Could not create the Java
Hi Friends, when am creating new adf page and starting Run the ADF page it will through an error *** Using port 7101 *** "C:\Users\Rama Krishna\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd" [waiting for the s
-
Get disconnected after trying to watch videos or download files
Whats with jumping through hoops to get technical help? Every time I try to watch a video or download software the browser freezes. It then can't find web pages for about 1-5 minutes and then will re connect to most but will not be able to find any g
-
Is this malware???
Hello, I have recently started to get the following popup message in Safari: "Popup blocking software has prevented display of the Trend Micro Security Services dashboard. Open an Internet Explorer window and enter the following URL in the Address bo