Q10 repeatedly sending email
Hi there,
A few days ago my I had issues sending emails form my Q10 for about a six hour period - after sending the email would appear in Hub with a clock beside it like it was going to send, but would go no further. These emails still have the clock beside them. However, one of the emails is being sent once a day to my coworker. Everything with the email works fine on my desktop, it seems to be an issue with the device. Any suggestion of what the problem is and how I can stop an email from being sent to my coworker everyday?
Your Post is confusing. Difficult to understand.
Similar Messages
-
I have validated email and restarted. the phone still will not send email. this is intermittent. Sometimes it does, sometimes it doesnt.
Well, a bad network signal or connection to your email server is always possible.
But, it's quite hard to test or troubleshoot while it is working perfectly.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour?
Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal -
How to avoid repeated emails using send email tasks in package?
Hi,
I have package with two sqeuence containers which are not connected.So when I was using send email tasks I was getting repeated emails like 5 to 6 emails.So, can someone hep me on this.How can we avoid repeated emails.
Regards,
Sudha
sudhaSee this example on preventing executing a task within an Event Handler:
http://microsoft-ssis.blogspot.com/2014/07/prevent-events-executing-multiple-times.html
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
Hello experts,
SAP provides a solution to repeat for the failed emails and faxes. We can select multiple messgaes and repeat send to one email address. Is there any standard functionality to do this automatically? If not, is there any function module to do the repeat sending with changing receipient?
Thanks in advance.
Ganesh Khumsethe 550 error code usually means that the mail server you connected with didn't want to relay your message (which is an option they often don't allow). lot of mail servers don't want you to use your own software so that you have to use their software (usually a browser account) so that they can show you all sorts of advertisements (I could be wrong about this, though). The SMTP will allow them to basically cut you off from using it unless you're actually logged onto the server itself (which I have yet to find a way, as its not part of SMTP -- it's part of the POP commands, but they can disable POP altogether).
If you want to keep developing in spite of this, though, try setting your own PC up to be a SMTP server with your own software or do a search for some small software called "agsmail" which is free. If you want to learn more about the SMTP commands (which those Java mail libraries are probably using behind the scenes) take a look at the RFC's for 'em.... here's the basic one for SMTP: http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc2821.html
ref: a friend from community discussion -
Send email by code using button in a repeating table
Hi
I have got a repeating table with textboxA, 1 people group textbox and a button. What I want is, when the button is clicked, an email should go out to the person's account selected in the people/group textbox with the contents of the textboxA value.
How do I do that in infopath, I tried the below code just to see if the email was going out, but I was getting a permission error.
MailMessage MailMsg = new MailMessage();
MailMsg.Body = "This is a test message and currently logged in user is " + System.Environment.UserName;
MessageBox.Show("This is a test message and currently logged in user is " + System.Environment.UserName);
//CTRL65_5_Clicked.Enabled = false;
MailMsg.From = new MailAddress("[email protected]");
MailMsg.To.Add("[email protected]");
MailMsg.Subject = "InfoPath Test Message";
SmtpClient server = new SmtpClient("test.smtp.com");
server.Send(MailMsg);Hello,
First make your form as full trust from form options and verify if you get any permission issue or not.
Go to "File", then "Form Option", click on "Security Level" und clear the checkbox next to "Automatically determine security level" and instead select "Full Trust".
Later you need to follow below link to send email to selected user of person picker field.
http://blogs.msdn.com/b/infopath/archive/2006/04/05/569338.aspx?PageIndex=4
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Cannot send emails on Q10 while traveling using wireless
Q10 PROBLEM I am on Rogers wireless using a telus email address. The incoming server setting is Telus and out going is Rogers wireless, While in Canada I have no problem receiving and sending emails. When I travel I do not buy the data packages I rely on wireless connections and with the Q10 I am not able to send using wireless when I travel. I have tried changing the outgoing server to telus in those situations but it still will not send, In the last month I have tried it in Jamaica and in Vegas with the same results...will not send emails I receive fine. Other people must be having problems? Rogers has been useless directing me to a solution, Help.
GregandhisQ10 wrote:
Thanks again...... I will take another run at Rogers and see what happens. I am not sure I guess when you say hosted but I will ask that whan I speak to Rogers.
You will know by virtue of the email address format. If it is @BB, @Rogers, @Telus (@Carrier), or something else that seems to point to either BlackBerry or a specific carrier, then indeed it is a hosted email account.
GregandhisQ10 wrote:
I have had the same email account at Telus for ever and all other BB devices I've had used the incoming and outgoing from Telus but this device will only work sending if I use the rogers outgoing server so I end up with a teuls incoming and a rogers outgoing
I don't understand that at all then. If this is a hosted email account, I can see no way for it to ever function on any BB device other than a) a legacy BB device and b) a legacy device that is actually operating on the original carriers network. I have never heard of a hosted email account being directly usable (e.g., no forwarding involved) on any device for any other carrier. So perhaps this isn't hosted after all...but still, I have also never heard of any restriction to use the carriers outgoing SMTP server only.
I believe that perhaps I do not actually understand your exact situation.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Why is Firefox 3.6.10 crashing repeatedly when I am using hotmail to try to send emails?
I am only having difficulty with hotmail when using Firefox 3.6.10. Opening hotmail is OK, and so is reading emails. The problem starts ONLY when I try to SEND a new email, or reply to an existing email. The email composition page within hotmail opens up, but then my hard drive begins to act erratic and spins non-stop. Then, a few seconds later, it crashes altogether. I restore the session, and all my windows open up normally, but another crash is inevitable because that 'send email' hotmail window is open. Presto... another immediate crash. So, obviously, I can restore a 2nd time, this time WITHOUT restoring the hotmail window, and everything seems to work fine. I have to open up a new tab for hotmail, and that appears to work fine for seeing what new is in my inbox, and even as far as reading emails. It seems to only crash when I try to SEND emails.
I had to go through about 20 different crashes before I could isolate the hotmail window as the culprit. They ALL have the same signature: coreclr.dll@0xbae82 . Of course, "Search Mozilla Support for Help" turns up absolutely nothing on the signature.
The Crash IDs are numerous. I've only listed a few of them, in the link to the right.Hi
coreclr.dll is an MS Silverlight dll.
Try de-installing silverlight & re-install Firefox
I seemed to have an older version of silverlight already on my computer, but that wouldn't uninstall.
My solution that worked for me is to use the Windows install cleanup utility: http://support.microsoft.com/kb/290301.
Select Silverlight from the list, and then download Silverlight again and reinstall.
And, if all else fails:
http://www.microsoft.com/getsilverlight/get-started/install/uninstall.aspx. -
Cannot send email vial MAIL application in Tiger
1. When sending email using .mac account in MAIL application, my password is not accepted. The email is deposited in the outbox and is not sent (no whooshing sound). And no reflection of the email is in the sent box.
2. When sending email using an alternative earthlink account, my password is accepted and the email is sent with whooshing sound, and reflection of sent email is found in the sent box.
3. Within MAIL, I notice that my .mac address is "Cristino Vicerra Jr Cristino Vicerra Jr <[email protected]>" (name is repeated twice); and that my .mac account is "[email protected]@mac.com" . Is this a significant to my problem of not being able to send email? How can I correct this?
Can anyone help me? Thanks
PowerBook G4 12inch Mac OS X (10.4.2)
PowerBook G4 12inch Mac OS X (10.4.2)Cristino,
Welcome to the Discussions.
Please read the following Knowledge base article, and try changing to Port 587, or if that fails change to use the SMTP provided by your ISP as the Outgoing server in the .mac account. See:
http://docs.info.apple.com/article.html?artnum=166743
Post back with results, or any questions. -
I cannot send emails from my IPad and IPhone
I cannot send emails from my iPad or iPhone, but can receive them. I can send from my iMac using the same settings and network... Ideas?
What is your iOS version? Try deleting the account in Mail and setting it up again. Repeat in second device if successful/necessary.
-
Sending email to multiple address using Utl_Smtp
Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause: A SMTP permanent error occurred.
*Action: Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected] U1
[email protected] U2
[email protected] U3
[email protected];[email protected];[email protected] U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected] U1
[email protected] U2
[email protected] U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank youSimple Mail Transfer Protocol RFC 5321 specifications.
RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
The first or only argument to this command includes a forward-path
(normally a mailbox and domain, always surrounded by ">" and "<"
brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb. -
Dear experts,
I am trying to send an email using UTL_SMTP (i switched from UTL_MAIL to UTL_SMTP since i need to send mails with large attachments - BLOB). I am using the demo_mail package given here:
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
While running the program I am getting an error message (from the error.log) saying:
[Mon Aug 04 14:00:21 2008] [error] [client 192.168.0.7] mod_plsql: /ns/email_p.send HTTP-404 ORA-29279: SMTP permanent error: 530 5.7.0 Must issue a STARTTLS command first. 9sm12723808qbw.6\nORA-06512: at "SYS.UTL_SMTP", line 20\nORA-06512: at "SYS.UTL_SMTP", line 98\nORA-06512: at "SYS.UTL_SMTP", line 221\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 258\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 119\nORA-06512: at "NEXTSTEP.EMAIL_P", line 33\nORA-06512: at line 31\n, referer: file:///C:/Documents and Settings/Mayank/My Documents/Flex Builder 3/ns5/bin-debug/main.swf
My code is as follows:
PACKAGE DECLARATION. This is the DEMO_MAIL package posted under above link (I have renamed it).
CREATE OR REPLACE PACKAGE NEXTSTEP.send_email_helper IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'smtp.gmail.com';
smtp_port PLS_INTEGER := 587;
smtp_domain VARCHAR2(256) := null;
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;How should I solve the above error? Can anyone help me with my query please?
If I add the code to start TLS it still gives me an error. If I add the code
utl_smtp.command(conn,'STARTTLS');
utl_smtp.helo(conn, smtp_domain);
under email_sender_help package just before under begin_session function, it gives me an error saying:
ORA-29279: SMTP permanent error: 503 5.5.1 EHLO/HELO first. s27sm2097329qbs.12
So then if i enter the same code after:
utl_smtp.command(conn,'STARTTLS');
utl_smtp.helo(conn, smtp_domain);
It gives me an error:
ORA-29278: SMTP transient error: 421 Service not available
Message was edited by:
Monk
Message was edited by:
Monklook like rely turned off on the server..
check this.. or ask your network guys..
Go to Control Panel->Add or Remove Programs->Click on
Add/Remove Wndows Components
Check IIS check box.
Select Internet Information Service (IIS) option and click on Details button
Check whether SMTP Service is checked or not.
If not selected then select SMTP check box.
This process should be done on server.
It will help out from ORA-29278: SMTP transient error: 421 Service not available problem.
thanks -
Issue with script timeouts - trying to send email mail shots - hosting recommendations?
Background is this - I look after a site for a recruitment agency, which has a backend mySQL database.
It includes a table of potential candidates, which the site owner can search based on various criteria and then send all the returned candidates an email about potential jobs they might be interested in.
I'm using an off the shelf script to send the emails, and have jumped through a few hoops to get this to work, but it looks like we need to move hosting unfortunately.
The script is able to limit emails so that the hosting company doesn't get black flagged as a spammer.
I've set it up with a progress bar in a new window so the site owner can see progress, but easily get back to the rest of the site.
But where we have come unstuck is the script timeout on the server - so even though its set to send emails slowly enough, ie under 500 emails an hour, because of that slow pace, it fails if it takes more then five minutes to send them all as the script times out.
My understanding is that the script includes a line to reset the script timeout value to 0, so enabling the script to keep running until all the emails have been sent. But unfortunately our current hosting company does not allow the script timeout to be reset at the PHP level.
So my question is this - is anyone doing anything similar, and if so, can you recommend any hosting company that does allow the script timeout to be reset at the PHP level?
Because at the minute it seems like a frustrating catch-22 - slow it down to get around the spam issue, and it won't run long enough to send all the emails. Speed it up, and it falls foul of the script timeout.
Any advise on this, or hosting suggestons most welcome!
Thanks.Although there is an AppleScript Forum, Automator can run AppleScripts, so sometimes things can go in either forum. In your script, other than not setting a recipient, you are just getting one of the persons. You need to get a list of your contact information, then build your outgoing messages from that list - for example:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
set theEmails to {} -- this will be a list of email addresses
set theNames to {} -- this will be a list of names for the greeting
tell application "Address Book"
activate
set theGroup to (choose from list (get the name of every group) with prompt "Choose a Group") as text
if theGroup is "false" then return -- cancel
repeat with aPerson in (get every person of group theGroup) -- build email and name lists
set the end of theEmails to the first item of (get the value of the email of aPerson) -- just the first address
set the end of theNames to the first name of aPerson
end repeat
end tell
tell application "Mail"
repeat with anItem from 1 to (count theEmails) -- make a new message for each entry
tell (make new outgoing message at the front of outgoing messages with properties {subject:"Test Mail"})
set visible to true
get item anItem of theNames
if the result is missing value then -- no name
set the content to "message"
else
set the content to "Dear " & the result & "," & return & return & "message"
end if
make new to recipient at the end of to recipients with properties {address:(item anItem of theEmails)}
end tell
end repeat
activate
end tell
</pre> -
How do I stop iCal sending emails?
I've added an exchange account to iCal. However, it recently started sending massive amounts of "Declined" emails for events, some of which are far in the past (years ago.) This happens for multiple events and multiple recipients. I believe the problem is that at one time I "deleted" everything in the iCal notifications area, as it was cluttered with meetings that were no longer relevant.
However, iCal now wants to send emails to everyone on those invites telling them of the Decline. In one minute, my mail account sent over 150 emails, which is very embarassing and inconvienent for other users. I actually had to pull the ethernet cable and disable iCal.
Is there a way to "flush" these out with mass-emailing everyone? I can't find a way to tell what is going to be sent without actually being online. I tried deleting my account in iCal and recreating, but the same behavior happened the next day. I have Outlook running in a VM and have been using that in the interim, and it doesn't seem to have the issue.
I want to go back to using iCal exclusively, but I'm afraid to even open the program at this point. Help!I just went back into my brother's calendar and he has that event as a recurring event from August 2007 to November 2011 at which point apple moved accounts to me.com. So it shows every week and I think when I moved I selected last event and checked repeat to never and applied to 'all future events' when pop-up gave that option. So is there any way to resolve this? His calendar does not show any sharing.
-
Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMcPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
Maybe you are looking for
-
Multiple Digital Signatures (certificates) results in VERY slow PDF
I created a form in Lifecycle that typically has 8 signatures. As more signatures are added the form slows down significantly. Our director, who ultimately signs off on the document, has informed us that it took him 35+ minutes to approve 3 documen
-
I can't print from my mac to a cannon IR 4235 UFRII Print Driver
How do i connnect to a canon IR 4235 UFRII print driver from my mac?
-
How to check multiple special characters in this query.
When the master_title has no comma in it, I am getting an empty master_title. This is because INSTR(master_title,',',1,1) is returning 0. In addition, I want to be able to specify other characters besides the comma. Example: ":" "/" "-". Can we fit t
-
Not sure any more details are needed to supplement the question.
-
Drill Down Functionality in Report.
Hello Gurus, I have one requirement where end user want to use drill down functionality for OBIEE reports. we are using 10.1.3.4.1 version rite now. Now what user wants is he want to drill down from Country -->State --> County -->City --> Zip code, S