QBE issue when using different db types

Hello,
Our ADF application has the ability to connect to the same schema but different backends (Oracle and SQL Server). I have successfully implemented switching the AM data source. I am running into a syntax issue when performing Query By Example for a table. The error is (Incorrect Syntax near "|"). In the VOImpl I overrode the function public String getViewCriteriaClause(boolean forQuery) and I can see the viewCriteriaClause is "( (UPPER(TransMasterEO.TMMessage) LIKE UPPER( ? || '%') ) )". This works when running against the Oracle instance but fails when running against the SQL Server instance.
I implemented code to replace the "||" with "+" but then we fail on Oracle. Can someone recommend an approach to resolve?
Running 11.1.1.6
Thank you
Rudy

he different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
Timo

Similar Messages

Misc transactions running total turns blank when using different exp type

Hi,
I would like to ask for some advise on how to fix this issue:
When entering miscellaneous transaction with 2 different expenditure type (Labor and Material) the running total will be blank. But if we enter the same expenditure type (both Labor or Material) the running total will have values.
Any idea how to fix this? Thanks!
Application: 11.5.10.2
Edited by: JulieAnn on Mar 27, 2012 11:21 PM

This was fixed by changing the "Pixel Format" in the catalyst control center to "RGB (Full RGB)".. Somehow it got changed to "YcBcr".
I removed the /etc/ati/amdpcsdb file that the fglrx driver likes to put settings in and did a fresh reinstall of catalyst-test and everything looks good now. Really no idea how the pixel profile got changed. Also noticed that my resolution was much lower than it should have been (which for some reason doesn't affect XBMC which runs in native resolution no matter what?), but that was an easy fix of adding Mode "1920x1080" to my Display section in xorg.

Odd issue when using UDT (user defined type)

Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

Project changes when using different pc's

ok i had using pro 4 a project saved on pc one
i then opened it up on another pc [pc 2] where i added some title pages
then saved the project on pc2 and copied the whole saved folder back to pc one
when i opened the copied project on pc one [using pc one] the title fonts have changed
is there some issue when using more than one pc to work on one project ???
oh i forgot pc one = win xp and pc2 = windows 7 !!!
cheers

ok the font used was MV Boli
on both pc when i look in titler they both say MV Boli
they just look totaly different
other thing different between the two is :- the font templates used and saved on pc 2
are not showing up when opend on pc 1

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Bluetooth issues when using smartwatch on the z1s

I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.

I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else.

Smartform font spacing Issue when using SAP printer name

Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
Praveen

Hi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat.

Dbms_crypto - avoid error when using different key in lower environment

Hello Experts,
We are using Oracle 11.2.0.2. We are planning to implement dbms_crypto to encrypt few columns. We clone the data from production to lower environment ( DEV, QC).
For the lower environments, we do not want to get the sensitive data from production and do not plan to use same key. Rather than getting an error when using differnt key, is it possible to get a different resultset back.
In other words, we want the implementation to be same across environments but want to use a diffent key in lower environment and get different result (or garbage).
Any suggestions would be greatly appreciated.
While testing this logic, I am getting following error when using differnt key to decrypt. It works fine if I use same key.
Error at line 1
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 19
DECLARE
l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
   l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
l_encrypted_raw     RAW(2048);
l_decrypted_raw     RAW(2048);
BEGIN
DBMS_OUTPUT.put_line('Original : ' || l_credit_card_no);
l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l_key);
DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l2_key); --**Using different key to decrypt
DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
END;Thank you.

If I understand what you are trying to do ... and I may not ... it is not going to work.
SQL> DECLARE
2   l_credit_card_no VARCHAR2(19) := '1612-1791-1809-2605';
3   l_ccn_raw RAW(128) := utl_raw.cast_to_raw(l_credit_card_no);
4   l_key1     RAW(128) := utl_raw.cast_to_raw('abcdefgh');
5   l_key2     RAW(128) := utl_raw.cast_to_raw('zyxwvuts'); -- alternate key used to attempt a different decryption
6
7   l_encrypted_raw RAW(2048);
8   l_decrypted_raw RAW(2048);
9 BEGIN
10    dbms_output.put_line('Original : ' || l_credit_card_no);
11
12    l_encrypted_raw := dbms_crypto.encrypt(l_ccn_raw, dbms_crypto.des_cbc_pkcs5, l_key1);
13
14    dbms_output.put_line('Encrypted : ' || RAWTOHEX(utl_raw.cast_to_raw(l_encrypted_raw)));
15
16    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key1);
17
18    dbms_output.put_line('Key1 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
19
20    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key2);
21
22    dbms_output.put_line('Key2 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
23 END;
24 /
Original : 1612-1791-1809-2605
Encrypted : 3534443342333642353141363846384237463732384636373943374630364234323243334539383042323135
Key1 : 1612-1791-1809-2605
DECLARE
ERROR at line 1:
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 20

JDev 9.0.3.3 Commit issue when using Transaction DataSource

Hi,
Env: JDev 9.0.3.3/WL 6.0 sp1/Oracle 8i
We have successfully deployed our application in 3-tier(remote mode) in JDev 9.0.3.2. using JClient, EO/VO, EJB Session Facade (BMT).
Now we are planning to use JDev 9.0.3.3
In JDev 9033 with the same code base we have issues after Commit.
We are using ejb.txn.type=global (default) and Weblogic Transactional DataSource. It gives following error after Committing and when we navigate to some other row:
=====================================================
[690] BaseSQLBuilder Executing DML ... (Update)
[691] Executing DML...
[692] UPDATE CISDBA.DCX_X_SAVED_SEARCH SavedSearch SET DCX_MODEL_YEAR=?,DCX_USAGE_VEHICLE_FAMILY=?,DCX_END_ITEMS=?,DCX_RECORD_STATUS=? WHERE DCX_ID=?
[693] cStmt = conn.prepareCall(" UPDATE CISDBA.DCX_X_SAVED_SEARCH SavedSearch SET DCX_MODEL_YEAR=?,DCX_USAGE_VEHICLE_FAMILY=?,DCX_END_ITEMS=?,DCX_RECORD_STATUS=? WHERE DCX_ID=?"); // JBO-JDBC-INTERACT
[694] cStmt.setObject(1, "2004"); /*DcxModelYear*/ // JBO-JDBC-INTERACT
[695] cStmt.setObject(2, "LX"); /*DcxUsageVehicleFamily*/ // JBO-JDBC-INTERACT
[696] cStmt.setObject(3, "All"); /*DcxEndItems*/ // JBO-JDBC-INTERACT
[697] cStmt.setObject(4, "All"); /*DcxRecordStatus*/ // JBO-JDBC-INTERACT
[698] // ERROR: Unknown data type java.lang.Long // JBO-JDBC-INTERACT
[699] cStmt.setObject(5, "206"); /*DcxId*/ // JBO-JDBC-INTERACT
[700] cStmt.execute(); // JBO-JDBC-INTERACT
[701] cStmt.close(); // JBO-JDBC-INTERACT
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[702] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[703] BaseSQLBuilder: setSavepoint 'BO_SP' ignored
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[704] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[705] EJBTxnHandler: Commited txn
[706] BaseCostInvestCostView2 notify COMMIT ...
[707] BaseCostInvestCostView1 notify COMMIT ...
[708] StdCostView1 notify COMMIT ...
[709] AltCostView1 notify COMMIT ...
[710] PaperCarView1 notify COMMIT ...
[711] InvestCostItemView1 notify COMMIT ...
[712] SavedSearchView1 notify COMMIT ...
[713] AltCostView1_BaseInvestToAltViewLink_AltCostView notify COMMIT ...
[714] InvestCostItemView1_BaseInvestToInvestItemViewLink_InvestCostItemView notify COMMIT ...
[715] PaperCarView_BaseCostTrackedVehicleViewLink_PaperCarView notify COMMIT ...
[716] VehicleProgramLOV1 notify COMMIT ...
[717] SubDeptLOV1 notify COMMIT ...
[718] Transaction timeout set to 28800 secs
[719] Column count: 14
[720] ViewObject : Reusing defined prepared Statement
[721] QueryCollection.executeQuery failed...
[722] java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
     void weblogic.jdbcbase.jts.Connection.checkIfRolledBack()
          Connection.java:468
     void weblogic.jdbcbase.jts.Statement.setMaxRows(int)
          Statement.java:179
     void weblogic.jdbc.rmi.internal.StatementImpl.setMaxRows(int)
          StatementImpl.java:82
     void weblogic.jdbc.rmi.SerialStatement.setMaxRows(int)
          SerialStatement.java:132
     void oracle.jbo.server.QueryCollection.executeQuery(java.lang.Object[], int)
          QueryCollection.java:534
     void
===================================================

Hi Carsten,
I tried to reproduce your problem, but couldn't. Let me explain what steps I executed and perhaps you can advise where I've not matched your steps.
--Using build jdeveloper 9.0.3.3.1203, I built a new bc4j project containing a dept-emp default bc4j project (deptEntity, empEntity, deptView, empView, deptempFKAssoc, deptempFKViewLink, ApplicationModule).
--In dos shell, I went to the directory \jdevdir\jdev\bin and ran setvars -go to set the correct jdk version
--In the dos shell, in the directory \jdevdir\j2ee\home I executed the following command to install oc4j:
java -jar oc4j.jar (defaults pswd to welcome for admin)
--I remoted the appmodule to EJB Session Bean (BMT) and created a new deployment profile using the 9ias configuration for the application module.
--I deployed the bc4j objects to oc4j
--I created a new project
--In this project I created a new jclient master-detail form using the above project's application module for the data model
--I saved all and compiled the jclient project
--I ran the jclient form and inserted a master record
--I committed the transaction successfully
--I browsed records, then edited a record
--I committed the transaction successfully, then browsed.
Is there something I've missed? Did you migrate your project and not start by creating a new project? Is there something special about the database schema you are using?
Thanks,
Amy

ABT1 and ABT1N using different transactiont types

Hi,
An issue was identified whereby SAP may be computing tax depreciation incorrectly in a year in which an asset converts to straight-line and is transferred. This could potentially apply to all of the tax books in SAP. Transaction type 153 (incorrect) vs. transaction type 145 (correct) for assets that have been converted and have a "multi-level" depreciation key. Second level is incorrect.
This is because earleir they were ABT1 which was using transaction type 145. The new transaction ABT1N is using transaction type 153.
Best Regards,
V

he different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
Timo

Error when using 557 movement type to remove stocks from intransit

Dear All,
We have some stocks left in intrasit where we use only inventory management to do this stock transfer(ie. we are not using STO),now we want to remove this stock from intransit. When i tried to use movment type 557 I got an error (Deficit of PL Stock in transit 10 DZ : CHS10088 2KUR 0000000867) with message number M7021. I cross this material with mb52 to find the avalability of this intransit stock and found that it is available at given plant but with out a batch number. When I tried to use this movement type it asks for a batch number so i have given an available batch number. Can you please help me to remove this stock from intransit.
Thanks & Best Regards,
Chameendri

Hi
the movement types 557 ( and 558 ) can only be used to update intra-company
transit stock which is saved in MARC-TRAME. IF you are using purchase
orders cross-company stock transfers, the transit stock is only a virtual transit stock what is calculated
based on the purchase order history. So this issue cannot be addressed
by changing the data in a stock table.
Are you using intra-company STO ?
Please check carefully note 392205 that contains the report ZTRAME
.Please see the following information:
A report attached to the note 392205 tries to explain the stock in
transit using the documents existing in the system. First verify the
current stock in transit situation using the report ZTRAME as per the
note 392205. This program tries to 're-calculate' the stock in transit
based on the material documents and the purchase order history.
Based on the results of the program the movement-types 557 and 558 can
be used to correct the stock in transit (-> add or book out stock in
transit).
I hope this can be of help
BR
Nadia Orlandi

Want to use different valuation type for one finish in house prod. materia

Hi,
Please update on subject requirement of different valuation type for same finish in house produced material.
We take e.g. as below
Valuation type -1) VA01
2) VA02
Want to assign both valuation types to material FINISH01
Then, i want create process order as per valuation type VA01 & VA02 ,let consider for 5 quantity each. While creating process
order, system shoulf propose selection of valuation type.
Regards,
Chetan

Hi,
use Split Valuation, When u do the GR against production order...System will ask valuation type.
and Same material code with maintained with different valuation type in your inventory.
Regards,
Pardeep Malik

When using different profile, I can't get it cleared for security

Due to trouble with Flash, I changed/added a ff profile.
When I then tried to sign in to yahoo, I got screen saying for security purposes I had to verify my ID. I had a choice of several methods, text or voice to cell, email to different email.
I tried both texting my cell and getting email. Both times, I got code. I typed it in and clicked on 'submit'. Nothing happens.
The image remains the same. It looks like I did not click at all. I have repeated this, sometimes clicking 8-9 times. still no change.
In order to reach my yahoo mail, I had to go back to my earlier profile. I may as well change back to old profile and as changing did not solve the problem with flash.
But I would still like to know what is going on/ how to fix it.When I travel and use different computer, I have to do this, verify ID. I want to know how to force the verifcation through.
Thanks

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

QBE issue when using different db types

Similar Messages

Maybe you are looking for