QD crash while saving the query

Hello colleagues,
I have created a query, which I doubt has some issues with the message server. I forcibly saved the query and then I'm receiving a dump - RSNSB VOID Erroneous FormVar.
I can regenerate the query. But, please advice me how to prevent such errors in future.
Regards,
Arif

Hi,
The error you have received is a resultant of an erroneous formula variable defined in your query.
In general, if you suspect an error in the query, it is better to check the query for errors before saving it.
This way you can prevent unwanted dumps.
Regards,
Bharath

Similar Messages

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Errors while saving the query

We are getting the following errors after saving the query:
1)The system tried to insert a data record, even though a data record with the same primary key already exists 0
2)An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause 0
3)Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION 0.
Not able to save the changes in Query also.
Always welcome for any ideas please...
Thanks in advance.
Bala

Hi,
Please apply the corrections from Note 1015402 using SNOTE transaction.
Regards,
Selva

Error while saving the query A299 Urgent

I had created a Query on Multi provider and when i am making changes to it while creating and saving the same it is giving me a error "[A299(BRAIN)] Terminate:System error in program Cl_RSD_MULTIPROV and the form GET_PART_iOBJNM_CMP-01 "
Please Help in resolving the same thanks.\

Hello Sreekanth,
Generally this error is due to inconsistency in Multiprovider. Could you please do a dummy change for this
multiprovider and re-activate it.
This will resolve your issue,
Regards,
Arvind

Problem while saving the query

I have created transport request from solman, and when I try to save the query under the the request it is asking whether to create a new task under a different specific user, if I cancel it the query is not getting saved, please help me.
thanks

Hey Sudeer,
This happens becoz the Query that u are changing is already locked by another transport request which is owned by diffrent user..
Ask the relevant user to release the corresponding request, so that u dont get the prompt again....
To avoid it, just create a new Query( totally new query ) and then assign your transport request to it..
Reward points for usefull answer...
Regards,
Anand Rangarajan

Sales report issue while saving the query

Hi,
I am working on Sales reports and that i came across a senario and facing a problem, can anyone help me over this
Senario:
I created a structure in Rows and added few keyfigures to the New structure which is in Rows.
After that i added 2 charcteristics.
Now the problem is that when i save the query i am getting the Keyfigure structure first and then characteristics
But, i need the 2 charcteristics first and then i need the Keyfigures
I changed the query as i want it like i placed 2 charcteristics first and then the keyfigure (structure) and the query saved sucessfully.
The problem is that when i open the query again i found that the Keyfigure (structure) first and then the 2 charcteristics
I did it all my possible ways still the problem perstists
Edited by: MAHESH MUMAR on Oct 6, 2008 2:22 PM
Edited by: MAHESH MUMAR on Oct 6, 2008 2:32 PM

mahesh,,,
can u xplain more what xactly is ur need.
"After that i added 2 charcteristics."
so do u want chars & keyfig in Rows only.
this way i dont think u will have report output ..
Take simple e.g. below:
$----
Quantity
Material
Channel112--
1
Channel223--
34
Is this how u want ur report to display?
that means u will need material and channel in rows and keyfigures ($ & quantity ) in Columns.
if this is not what u seek what else is your rek.
sometimes such display helps to understand.
Yes u can add chars in Rows and then add structure of keyfigure.
Yes you can change the sequence of display in Rows among different structure.
But do u still have something in columns.
It is intersection of Rows & Columns that displays result data set...
let us know in more detailed e.g.

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Issue while saving the Query Urgent

Hi all,
I had created the query and also transport it toht QA . but due to some problem i need to change query. when i am trying to make the changes i am unable to do it bcoz the whole query is in display mode only and i am getting a message that the query request is not available as it is released in to the QA .
I am working on BI 7. plz let me know how can i make the change i also tried it by copying the query still i am unable to do it.
Whats d steps that need to follow i know i am missing some where
Regards

Hi
Go to RSA1-> Transport connection-> here click on Bex icon (Red truck icon) and in the next screen assign/create new transport request and then assign this request to your Bex package. Once you complete this, you will be able to make & save changes to Bex query.
Hope this helps.
Pradip

ERROR While Saving the Query

Hi
I am trying to save a a query, as YP_XXXXXXXXXX. it is giving me an error "Namespace /BIC/ must be set to changable". would anyone be able to help me out with the same
Regards
M

Hi This has been solved.
We needed to change the Object type"Query Element" to "Changeable Original". This solved our problem. there is also a realted note 337950 that can help in similar kind of problems.
Thought of sharing it with you all.
Regards
M

While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Form Builder crashes while saving .fmb file when connected to db

Hi,
I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
I am doing the following steps:
1) Open .fmb file in forms builder
2) Connecting to database
3) Making some changes in form
4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
5) Saving form <--- Here I am getting the error and form crashes
If I do not connect to database then builder is allowing me to save the file
1) Open .fmb file in forms builder
2) Making some changes in form
3) Saving form (Successful)
I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
But I am still getting this error while saving the changes when I am connected to database.
Please help.
Regards,
Edited by: rawat75 on Sep 2, 2011 7:13 PM

Hi Experts,
We are getting the same issue. Our form builder crashes once we open our custom form
in form builder.
Server shows:-
Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
Form Builder shows:-
Forms [32 Bit] Version 6.0.8.11.3 (Production)
How to upgrade the form builder version?

CS Crashes While Saving

There seems to be an incompatibility problem that causes PS CS to crash while saving under OSX 10.4.11. Crash reports say Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_INVALID_ADDRESS (0x0001) at 0xfffffff4 and strange folders ( ¬∂ßå∆∂´ ) are created in Home/Preferences. Apple blames Adobe. Adobe blames Apple. Either way - we're screwed.
Any gurus out there with thoughts?

Yes lower the allocation to about 75 -80 %.
You need some memory for the system also before relaunching PS trash the settings folder to give yourself a clean start and also if you don't have another disk or partition as a scratch disk get one.
To trash the settings folder
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS4 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file.

Garageband crashing while saving

Hi all,
I was working on a track on Garageband today on my ipad when it suddenly crashed while saving. Now whenever I open it up, it goes back to that song and won't save - so I can't access all my other files! There's an awful lot of work on those files and I really want to get them back but I've no idea how. I've tried switching ipad off and back on, but that hasn't worked - and the files aren't synced up to my PC as I haven't had access to it for a while.
Is there a way to get back to the main screen on garageband? Please someone help, this is so frustrating!
Thanks
PS

Sad to say this has now happended to me twice.
Any help or ideas would be greatly appreciated.
Cheers

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

User Exit while saving the Excise Invoice in J1IIN

Dear All,
I want know whether anu User Exits are there while saving the Excise Invoice in J1IIN.
The "scenario" here is as follows:
---I will create an invoice(Commercial) in VF01. Suppose I got a number 1234(This is Billing Document number).
---Now I will go to J1IIN and create an Excise Invoice by reffering to the VF01 Billing Doc Number.I will enter all the details. Then I will Save it. While saving I want to check the following aspect:
I want to compare the Billing Document Number and Excise Invoice Number and give error if both the numbers are not same.
---That is I want to see that Excise Invoice and Billng Document number should be same.
I need your suggestion in the above scenario.
I will definitely reward if problem is solved.
Regards,
Raj Kumar Reddy.

Hi Raj,
Here is a list of available userexits for transaction J1IIN :
J_1I7_USEREXIT_DEPOT_BEF_SAVE
J_1I7_USEREXIT_DUTY_IN_EXPORT
J_1I7_USEREXIT_EXCISE_BEF_SAV
J_1I7_USEREXIT_EXGRP_DETERM
J_1I7_USEREXIT_SERGRP_DETERM
hope they are of some use.
Regards,
Philip Johannesen

QD crash while saving the query

Similar Messages

Maybe you are looking for