Qm order- account adssignment for the qm order

Please advise how to assign an account assignment for the order (for example, cost center, sales order or controlling area).

Dear Yadav
Please find some of the points on QM order
1) Use QK01 for creating and assigning it to the materials. you need not go to material master and assign the qm order. QK01 you can give the plant, material , inspection type, order type , costcenter , profit center etc
2) Do not tick individual QM order if you are assigning the order material. Individual order means for each inspection lot an order will be created. This is not required in normal cases. you can create one single order and assign it to the material
3) Make sure that you have work center created with activity type defined in it. This workcenter should be assigned in the inspection plan also
4) Activity cost can be defined using KP26 where you can mention what is the per hour cost
5) The settlement will be done by the CO team using K088
Hope this helps
Regards
Gajesh

Similar Messages

The account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order, please respond as soon as possible.

My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>

This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com

Automatic account postings (for Intercompany Purchase order and Sales order

Hi all,
I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
I have created the master data
Customer receiving--G001
Sales Org.--GXIN
Distr. Channel- 01
Division - 00
Company code receiving - G1
customer supplying- V001
company code for supplying- V1
2 different scenarios
1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1. then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
Can this be achivable via Idoc with automatic account postings.
Please let me know if it doesnt make sense. thanks to all in advance
cheers
Jasmeet

Hi all,
For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
thanks for viwing the post
Cheers
Jasmeet

Storage Location Error duing GR of Subcontarct for The Sales Order Stock.

HI ,
Is there any settings to avoid individual entry of Storage Location field for the child components during the Goods Receipt from Subcontractor for the Sales Order Stock.
As per SAP standard , I have created Separate storage location for Sales order stock components as the Stock provided to vendor . While receiving the header component , System showing error to enter storage location for all the BOM component s . My Requirement is , Storage location should come automatically for the child component while receiving the Header Component.
Yogesh.K.

Hi Jurgen,
He's right, the posting is not a bug.
In case of MTO scenario, if components are managed in the sales order / project stock system withdraw them from storage location.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90b043ad11d189410000e829fbbd/frameset.htm
The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
Cs.
Edited by: Csaba Szommer on Jan 5, 2010 7:17 PM

I've created an iphoto book and have ordered through "buy book" option. Now my family would like to order more, can they order and pay for the book using their apple ID?

I've created an iphoto book and have ordered and purchased a number of copies through the 'buy book' option. My family abroad would like to order more, can they order and pay for the same book through their own apple account?

No - you need ot order and have them pay you
LN

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

Open the reservation for the Production order

Hi,
I have post the GI for Production order MB1A with movement type 261 from 100 peaces components. I would like to cancel a partial quantity of components from this posting (about 30 peaces). After cancel it the reservation for the production order has to be open for 30 peaces of components.
I've canceled it through MB1A and mtype 262 but the reservations weren't open and in the PO (component overview there is always the sign"the Final Issue for This Reservation").
Which T.code and mtype could I use.
Thanks
Dede

Hi,
Have you cancelled the movement (of 30 pieces) by selecting the "with reference" option from the menu?
If not, then reverse the current cancellation document. Then again cancel the 261 movemtn by selecting the with refernce button from the menu. It will sove the problem.
Check & revert.
Regards,
Rohit.

Same material can exist on multiple line items for the same order.

Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
Regards

No.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

How to delete or activate the deletion flag for the sales order line item

Hi All,
I have one Cust order & with referance to that cust order one production order is created . The production order user has done the Goods issue with 261 movement type & GR wi 101 before 4 months back , & he has reverse the GR with 102 on todays date . but in materila master the variable prize is maintain thats why it is showing a differance in the cost .
User want to delete the Production order as well as the custemer order From MDO4 , So we have make the Production order TECO & save , it is gone form the MD04 but the Custumer order still there . It is not allow us to cancell or reject . We have tried to maintain the reason for rejection but it showing the message that you can not activate the deletion flag for the order .
Could you please Help me to find out the way how can i delete the custemer order ?
Thanks In advance
Regards
Piyush

W ehave Settele that order & then activate the deletion flag for the order & then cancel the sales order.

Special stock indicator for the sales order (VBAP-SOBKZ=)

Dear All,
I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
Can anybody help me out with this problem ?
Reward points shall be awarded.
Rgds,
Indrajit Dey

Hi Indrajit,
Please post the stock with Special Stock Indicator (E), and againest sales order and item.
Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
After that you enter Sales order Number and Item then save the document.
Noe you try to do PGI,
I hope it will help you,
Regards,
Murali.

How I can get the Billing Type for the sales order and its items

How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards,

How to creat deadlock for the purchase order in SAP Workflow

How to creat deadlock for the purchase order in SAP Workflow

Hi Ben,
Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date? If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
DATA: vf_doc_date(10),
             internal_date TYPE d.
     vf_doc_date = sy-datum.              "Document date.
     internal_date = vf_doc_date.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
    EXPORTING
      date_internal            = internal_date
    IMPORTING
      date_external            = vf_doc_date
    EXCEPTIONS
      date_internal_is_invalid = 1
      OTHERS                   = 2.
Regards,
Vivek

Want last date of the month as default basic finish date for the Proc order

For forward scheduling type in process order, irrespective of the start date i want last date of the month as my basic finish date.
Ex start date can be 01/10/2009 or 15/10/2009, but the basic finish date should be 31/10/2009.

Hi Sam,
sorry to say , its not possible in standard SAP.
1) If, on order creation, a planned order exists for the production order/ process order, the basic dates are copied from the planned order.
2)If no planned order exists on order creation, you must specify at least one basic date.
The scheduling type determines the basic dates that you must specify. and it useses timings from routings for scheduling.
so may be you need some work around.
explain your requirement why do you want to fix it for the last day of month and other constraints, may be we can find some way.
Regards
Ritesh

Accounting Document for a Production Order

Hi,
How to get Accounting Document for a Production Order?
Please help.
Thanks,
Shiva

Hi Shiva,
Go to table bseg....
retrieve belnr -
> accounting document number
for a particular aufnr-----> production order
where bukrs = your company code.
Regards
Debarshi

Qm order- account adssignment for the qm order

Similar Messages

Maybe you are looking for