Qm02 completing the notification process while saving without fieldvalidate

In qm02 when I press complete button based on condition it should come out from complete process but for me when I through an error in user Exit. Then the save button is in enable mode and when I press save.It over comes the error and completing the notification.
Please give me some suggestions on this query.
Edited by: SAP@AMS on Aug 18, 2010 7:47 PM

Thank u every one for your excellece contribution towards us.I got a solution and this Thread was resolved.In future refference I am placing the solution also so it may help some time.
I am raising a error message on a field which stops compleate flag in qm02.I am succeed in raising the message after error the compleate flag in disable mode.But when I click save even compleate flag in disable mode notification is getting compleated.
Soulution:
We need to use error message in user exit before validating the compleate flag.because After validation of completing flag it alredy stored in buffer so when we press save the completion is releasing directly.
Thanks,
AMS

Similar Messages

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

HT201210 i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

HT1766 I haveabout 7 App's that I Need to update. However, when trying tot do so,the message I get is 'Can't download the app' (in Dutch). The app, however, such as Pages, is no longer available. What can I do to complete the updating process and start us

I haveabout 7 App's that I Need to update.
However, when trying tot do so,the message I get is 'Can't download the app' (in Dutch).
The App, however, such as Pages, is no longer opening and can't be used.
What can I do to complete the updating process and start using the Apps again?

Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

Just completed the redemption process. Where's the download and installation files?

Just completed the redemption process. Where's the download and installation files?

Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder

Every app install results in the "waiting" mode on my home screen. How can I complete the install process?

Every attempted app installation results in the "waiting" mode icon on my home screen. How can I complete the install process? What am I missing?

Hi,
1) Forget downloading the application from the device, and instead download it through iTunes and sync to transfer the application to your iPhone / iPad.
2) Other way is: Go to Application Settings> Store and tap above the Apple ID to sign out. Restart your iPhone / iPad, go back to Settings> Store and sign. Tap the icon that was waiting to update the application.

Default the Name of the Adobe Form while saving

Hi,
I am calling an Adobe Form from Webdynpro. While saving the form i need to default the name of the Form. Can anyone help me to solve this issue.
Thanks & Regards.

Hi Manikandan
I got a requirement as exactly you have posted, default the PDF filename while saving it (In Adobe forms).
If you have any solution for it, kindly share it with me.
Thanks & Regards,
Rajesh P

TS3662 please connect your iphone to a computer running iTunes to complete the activation process

please connect your iphone to a computer running iTunes to complete the activation process. what does this mean, why wont it just activate?

You answered your own question.
Question:
"what does this mean, why wont it just activate?"
Answer becasue you need to:
"connect your iphone to a computer running iTunes to complete the activation process."

HT201250 When I have completed the restore process , the computer asks me to restart , I have done this but it just cycles around for 15 minutes and asks me to restart again . What's the next step after this ?

When I have completed the restore process , the computer asks me to restart the computer. When I do there it cycles for 15 minutes and then asks me to restart again. What should I do next ?

See #E8 in Time Machine - Troubleshooting.
Also . . . an update was released the other day, to fix some sort of restore problem (we don't know just what). Run Software Update or download it from here: http://support.apple.com/kb/DL1505

HT1386 My iPhone 4S will not complete the sync process with iTunes. The sync process will not complete Step 3 of 6 (Preparing to Sync).

My iPhone 4S will not complete the sync process with iTunes. It hangs up on Step 3 of 6 (preparing to sync). Prior to trying to sync the iPhone I updated iTunes. Any suggestions?

I've already tried unplugging the iPhone and restarting my computer - twice.

I'm having trouble buying in game . Could not complete the purchase process

Hello ;
I have a problem 4 days . I'm having trouble buying in game . Error : Could not complete the purchase process . my credit card no problem and with another card and I've tried yet another mail adress . and itunes correction problem . This problem came later.
Waiting for solution help

Hi jonijo,
You probably also got a message to contact iTunes Support, which is what you need to do:
https://expresslane.apple.com/Issues.action
Select the options that best apply to your situation. You will also have an opportunity to fill out a description of your problem. iTunes Support will contact your via email, usually within 24 hours.
Cheers,
GB

"You must close your browser to complete the signout process" - Mandatory?

I notice when a users clicks sign out they get a message "You must close your browser to complete the signout process." Is this required or can one change this behavior? I see this as rude, as someone who has lots
of tabs open in IE will be forced to close the entire IE session and lose their tabs.
spnewbie

Depending on your browser and setting this may be necessary to close the browser. SharePoint is not being rude, its just trying to protect you.
Read the following thread. Andres has provided good explanation for why this is required.
http://sharepoint.stackexchange.com/questions/3344/you-must-close-your-browser-to-complete-the-sign-out-process
Amit

HT3204 I was in the process of restoring my ipad and an issue with itunes came up and itunes closed. Now my computer doesn't recognize the ipad as anything so I can't complete the restore process.

I was in the process of restoring my ipad and an issue came up with itunes and it had to close. I reopened itunes but now my computer doesn't recognize the ipad as anything plugged in to my computer. I am unable to complete the restore process.

Hi kimbo934,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
I hope this information helps ....
Happy Holidays!
- Judy

Qm02 completing the notification process while saving without fieldvalidate

Similar Messages

Maybe you are looking for