Qosmio F55 - Replaced LCD and brightness controls are backwards reversed

Hi,
the LCD for my Qosmio F55-Q502 cracked and I ordered the same part and when I installed it, everything works nice and all but the brightness up and down are reversed. Like Fn+F6 makes it brighter while Fn+F7 makes it darker? The original that came with it was a lp154wp1 (tl) (e1) but one I got is a lp154wp1 (tl) d1).
Does anyone think that bit of a variation of the model can make it reverse the controls? Even on Windows when you slider the brighness to the right it will dim and to the left it brightens. Also for anyone else that needs info on their Qosmio F55, the original is a lp154wp1 (tl) (e1) and its also known as lp154wp1 (tl) (a3) that is written on the lcd board.The replacement lp154wp1 (tl) (d1) is also known as a lp154wp1 (tl) (a2) also written on the lcd board
Any suggestions or help would be appreciated!

Hi hulkster,
Where you have ordered the new display and is it an original Toshiba spare part?
If yes I would contact an authorized service provider or the shop where you purchased it. In my opinion the screen is not 100% compatible to your model. This would also explain the different part numbers that you posted

Similar Messages

  • Volume and Brightness controls

    So I was installing Lenovo Drivers on my laptop after I nuked the hard drive and to repartition. However, somehow, I have TWO volume and brightness controls. Any ideas anyone?

    Hi ychen428,
    I saw your other post over here .  Is your audio working properly now with the exception of having two volume controls?
    Seeing as how the hotkeys are incorporated into Energy Management, could it be that there are two versions of Energy Management installed?  The on screen displays look like an older version and a new version.
    Dave 
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • TERMS OF PAYMENT AND CREDIT CONTROL AREA

    WHERE AND HOW EXACTLY TERMS OF PAYMENT AND CREDIT CONTROL AREA MAINTAINED IN CUSTOMER MASTER RECORD WILL REFLECT WITH EACH OTHER?  AND
    HOW DOES CREDIT CONTROL AREA CONTROLS THE
    TERMS OF PAYMENT OF CUSTOMER MASTER RECORD?

    hi
    1) terms of pay ment and credit memo----
    under customer master record, company code data, and payment transaction tab  there terms of pay ment field is there.
    2)FD32-----customer credit Matins
    regards
    sar

  • Functional area and Credit Control area

    HI
    Dear Guru's
    Kindly explain me the ,the differenec between Functional area and credit control
    area, with examples.
    with regards
    Arun Kumar

    Hi Arun Kumar,
    Functional Area :
    It organize your business for cost of sales accounting.  It allow you to segregate and classify different types of costs within one expense account.  For e.g. a single labour account to determine what amount of labour is spent directly on production as compare to sales or hr.
    OKBD - Maintain Functional Area
    Credit control area:
    An organisational unit that represents an area responsible for granting and monitoring credit.
    outstanding recievables can spoil the business process. to
    control credit limits in sap system we can configure credit
    control area.
    one company code can hav one credit control area only
    but one credit control area can hav many company codes
    i.e. u can assign one credit control area to many company
    codes.
    the relationship is one to many.
    Regards,
    Haribabu

  • Difference Between Controllin area and Credit Control area

    hi.
    can u pls tell  me the difference  Controllin area and Credit Control area....?
    is there any FM is available for CreditControlAreaGetList........?
    regards
    Guru

    Hi Bojja,
    Controlling Area:
    Controlling provides you with information for management decision-making. It facilitates coordination, monitoring and optimization of all processes in an organization. This involves recording both the consumption of production factors and the services provided by an organization.
    As well as documenting actual events, the main task of controlling is planning. You can determine variances by comparing actual data with plan data. These variance calculations enable you to control business flows.
    Income statements such as, contribution margin accounting, are used to control the cost efficiency of individual areas of an organization, as well as the entire organization.
    CCA(Credit Control Area)
    An organizational unit that represents the area where customer credit is awarded and monitored.
    This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
    Thanks,
    Rewrd If Helpful.

  • Failure of Shades, DarkAdapted and Brightness Control

    My iMac display is too bright even at it's lowest setting.
    A new profile in Display Preferences can't deal with this and the contrast control in Universal Access also doesn't help.
    I've tried 3rd party software. Brightness Control continually loses it's setting when the screensaver starts. Shades doesn't work for me because it leaves the pointer undimmed and that small too bright area is right where I need to look. And DarkAdapted is limited by the same screensaver problem as Brightness Control.
    I sure wish Apple displays could dim adequately as in the past.
    Any suggestions appreciated.

    I have DarkAdapted Pro, with registered version, it load your profile at mac os login, and darkadapted its a real bright control, not like brightcontrol (deform colours)...
    One question, do you have bright gradient left to right on your mac 24 alu?.. more bright at left side of your monitor, to view this, move one window at the left, and then move it at the right, if you see one variation of white values then the gradient is there!... ok it is my problem and a lot of people are at the same situation like me... not sure if it is a general problem...
    Ok see you bye!

  • Replacing LCD and LCD Case

    So, my AppleCare Protection Plan won't cover the replacement of the LCD and the LCD Case, so I was going to purchase these parts online, and I wanted to know if anyone knew how hard it actually was to do this task. All help is greatly appreciated.

    It's not easy, but if you have the tools and some skills in dissassembly it can be done. Here is the instructions.
    http://www.ifixit.com/Guide/Mac/MacBook/LCD-Panel/86/18/
    You may also want to do a search for macbook repairs. There are some good companies that do the work a lot cheaper than apple.

  • Windows 8.1 update and brightness control

    I have a DELL XPS L521X with Windows 8.1 (I had windows 8 some days ago) and I have had two problems:
    1) I did not allow Windows to upgrade to 8.1 and it forced me to do it. It gave me 15 minutes to save progress and do it. I was watching the NBA finals on my computer and it was the only thing I had to watch the game. The installation lasted the whole second
    half the game and I WAS NOT ABLE TO WATCH IT DUE TO THIS, YOU CAN IMAGINE HOW I AM FEELING ABOUT NOT USING WINDOWS EVER AGAIN... How can I prevent it from ever upgrading anything without my consent? I had already turned off updates from Control Panel\System
    and Security\Windows Update but it didn't help.
    2) My brightness control became broken after the 8.1 update. I had to manually pick the older Intel HD 4000 driver to have it working again or else my eyes would stop functioning after such a bright display. I had to switch to the 9.17 driver version from
    September 2012. Where can I get the lastest WORKING version of the driver?
    Please stop making me loose days fixing Windows issues... 

    Hi,
    We have set the GP to disable Windows 8.1 update in Windows store, you can check it here:
    How to Disable “Update to Windows 8.1 for Free” Notification in Windows 8 Store?
    http://www.askvg.com/how-to-disable-update-to-windows-8-1-for-free-notification-in-windows-8-store/
    For your second issue, it's not only related to Windows, but also the driver provider. Microsoft is working together with the device manufacturers and partners to deliver update package and try the best to solve the compatible issue and bring a great improvement
    on user experience. But you know, it will take some time.
    Thanks for your understanding.
    Kate Li
    TechNet Community Support

  • Sales Order Credit Account and Credit control area not updated

    Hi,
    I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
    First SO has credit control area and credit account is updated but the second order did not update with this information.
    For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
    For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
    Please let me know how fix the second order to rectify this issue.
    Thanks,
    Satish

    Hi,
    Goto OVAK T.Code.
    Assign credit check to your second sales order type.
    Assign the values from "A" to "D".Any value as per your need.
    Save.
    Regards,
    Krishna.

  • Two Company Codes and one Controlling  Area  Issue

    Hi,
    Client has company code 1000 and 1001
    Company code 1000 has been assigned to controlling  area 1000,but company code 1001 was not assigned to controlling area.but in last month they have posted FB75 credit memo with profit center.Now when they are trying to post the same it is giving the error saying company code was not assigned to controlling area.
    they are also using document splitting concept.How to solve this issue without assigning profit center.
    why this is giving the error now and why it was accepted before.any idea.
    Thanks
    Sunitha

    HI,
    Can u explain clearly for which company code u have posted document in FB75. If it is 1001 Company code It will not able to take Profit center or any cost object. Since u have not assigned comapny code 1001 to controlling area 1000.
    Please check Correctly.
    Regards,
    Sreekanth

  • Keyboard: audio and Brightness control keys not working with or without fn

    The Keys for controling Audio and Brightness (F1-F5) do not work.
    Also combined with pressing the "fn" key the keys do not work.
    So i only control audio with the remote control or the slider in the menubar.
    Making a reboot with deleting pram didn't help.
    I'm running the up to date version of leopard on a macbook pro (core2duo).
    I also searched in the forum for this problem.
    I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
    but switching this button on or off doesn't change anything.

    problem solved:
    the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
    and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
    thanks for help

  • No TrackPoint Scroll and Brightness Control After Resume

    Hello All,
    I'm having an issue with my new x120e where after a couple suspend/resume cycles both the Trackpoint scroll function and the ability to adjust screen brightness no longer work. Using the Trackpoint only yields results as a pointing device, and trying to use the brightness controls does nothing--no on-screen brightness level display. I've searched the forums but couldn't find these exact issues, and I'm using the latest versions of the UltraNav driver and Utility.
    Thanks!

    hey cbolos,
    check via http://support.lenovo.com and see that your Power Management software is at its latest version. If not, download and install.
    if it is the latest, uninstall all UltraNav drivers+Utilities and the Power Management.
    let window install its generic drivers. Test and see if it happens again
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Replaced LCD and Digitizer, Now it won't power up

    I just replaced the LCD and Digitizer on my 1st Gen iphone. Everything went well and I powered the phone up, prior to sealing it back to make sure it was working. I got the message that the battery was completely drained and then the screen went black. I plugged it in to run off of the power cord, and now nothing happens when I power up. I don't want to seal it back up until I get it working. Does the battery need to charge for a while? What could have happened from the time I plugged it in and powering up? Thanks

    I sent the phone out to have the battery replaced. They said that replacing the battery did not fix it.
    check out this image: http://www.hennosy.com/iphone.jpg
    The part that is red flashes when I start it up. After about 5-10 seconds the screen turns off.
    What does this mean? Any advice would be appreciated.
    Thanks.

  • Web service proxy and data control are not working properly

    Hi,
    I am working on jDeveloper 11.1.1.6
    I have a SOA web service which requires 3 inputs and return with a set of data.
    When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
    Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
    After that I have created web service data control and tested in that case also it is not showing any result.
    What could be the problem ?
    Please help.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Shay Shmeltzer,
    Thanks for the reply.
    I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
    There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
    1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
    Please Help.
    -- NavinK

  • Replaced lcd and digitizer screen remains black can see through itunes

    Long story short, had to replace front panel glass, LCD worked, when disassembled LCD stopped working, sort of. I can barely see what I think is the password screen but it is not bright enough to enter password.
    I can see everything through iTunes. Just cannot get the screen to not stay black
    Help!!

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for