Qosmio G30 - system problem after recovery procedure

I have Qosmio G30 - 148 which have Windows XP MCE, when trying to download some programs system crashed and make automatic restart.
I then used a RECOVERY CD to recover my all system and followed the instructions on the CD but when finished and rebooting the system a famous blue screen displayed tell me there's a problem in my system and windows must be restarted.
When reboot in safe mode there is a message tell me that the system is not fully installed. Please run setup again.
Could any body help me in that problem because it's a strange problem?
Note: I tried to install Windows XP from external CD but system did not know the hard disk.

Hi Ahmed
I would try to provide some useful hints;
First of all you can install the XP Pro on the Qosmio G30 this is no problem.
I assume you couldnt install the XP on the G30 because your have not installed the RAID driver firstly. As far as I know the XP would not recognize the HDD without the RAID driver.
The RAID driver installation is not very difficult. During the XP Setup procedure you have to press the F6 to include the driver from the external USB FDD drive.
If you dont have a USB diskette drive, then you could use a nLite to create a new XP CD with the RAID driver.
However despite everything Im not sure if this will help.
There could be really a hardware issue with your G30.

Similar Messages

Re: Qosmio G30 - RAID Problems on OS Installation

I've had my Qosmio G30-161 for half a year, and thought it'd ought to be time to reinstall the whole thing, so i could get rid of stuff i didn't need (Programs, Viruses and non-interesting video clips).
So i took my XP MCE Cd and tried to install, and i got guided through and come to the place where i needed to choose between 1st Unknown, 2nd Stripping, and 3rd Mirroring. I choose the stripping as i wished my harddrives to be in one. Then when i pressed "next" it gave me the error message "1005 - HDD not ready?"
I've tried going into the BIOS and chaneg the setting to different settings that Toshiba told me to, but it also warned me that if i changed the settings my OS would have to be reinstalled. No problem there. But i still get the same error message "HDD not ready?". So now i have to use another computer than my own to check the forums and mail etc.
Anyone know what i should do? I'll be glad with anything as long as i can have both my harddrives (60GB+60GB), and a working OS. :)
Please help, I'm urging for it, since the computer is the one i use for my school work. Feel free to ask questions about system stuff. If you have an answer, please let it be simple, since i realy don't wanna mess up again ^_^

Please check the details in user manual about the RAID installation.
Usually if you are using the clean Windows XP disk then you will have to include the RAID drivers firstly.
Without preinstalled RAID drivers the HDD will be not recognized and you will be not able to install the OS!

Qosmio G30 installation problem

Hello all guys
I have a huge problem
I have a Qosmio G30, recently recurrence, or used the disk, format it, confg. RAID, it will restart the formatting begins, ends restarts, and the problem here.
At the restart should take at the end of installation, which does not occur because the video driver crashes (nv4_disp). So every time I turn on the PC are always half installation.
I ask for help! And while we're at whatever you enter the BIOS of the Toshiba Qosmio G30!
Thanks

The problem only manifests itself when I try to install the os with the CD provided ... just read it that sends me to the main menu screen of the installation screen starts to fill up with lines and dots ...
while trying to install Win 7 with another cd, the problem manifests itself most nn, the screen is perfect ... but another problem arises, the installation nn part not because I need the driver disk in particular ....
I have two hard drives FUJITSU MHV2200BT PL from 200 gb each ... I tried to do several searches to find sti driver cursed but I find them ... I nn open pages that describe them to me and give me a link that makes me download a program Driver Genius Professional Edition, who sincerely nn I need to anything ...
I have no more ideas: (

Qosmio F10 doesn't run after recovery procedure

Hi, I have just purchased the toshiba recovery dvd for my qosmio f10 laptop, i put the dvd in and it goes through the recovery process and completes 100% it then tells me to remove the dvd and then press CTRL ALT DELETE to restart the computer.
Upon doing so it gets to the screen were it tells me windows is starting then the screen goes blank and flickers a couple of times, then the laptop re-boots and keeps on doing this, I press the F8 key when it restarts to go into save mode, but when it goes into save mode it tells me that windows is not fully set and won't go any further and tells me that I need to run set up again.
I do not have a windows cd only the dvd from toshiba which should put my laptop back to factory settings.
Can aynone help me before I ring toshiba?
thank you.

Hi
Its not easy to say why it happens. Usually the Toshiba recovery CD should works properly and after whole recovering procedure the notebook should run without any problems.
You have suggested that you have ordered this recovery CD from the ASP.
Did you get the right recovery CD? Check the CD description.
The other possibility is that the unit has a hardware fault. In this case you should contact the Toshiba service. Sorry but this is all what I can suggest.
regards

Operating system problem after system recovery

i have PURCHASED HP-ENVY-M6-1125DX (IN-USA) IT CAME WITH - WINDOWS8 OS .(BOUGHT IN BEST BYE)
RECENTLY I UPGRADED TO WINDOWS8.1 PRO PREVIEW. SINCE THIS VERSION OF OS WAS ASKING THE ACTIVATION KEY,
I HAVE RECOVERED MY LAPTOP TO FACTORY SETTINGS BY USING RECOVERY PARTITION PRESENT IN MY HARDDISK.
BUT NOW THE OS IS WINDOES 8 BUILD9200, AND THIS OS IS ALSO ASKING FOR ACTIVATION KEY.
PLEASE HELP US IN SOLVING THIS PROBLEM.

Hello Mahantesh-uppin,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues reactivating your Windows 8 Product Key after a factory recovery. I would recommend that you review and follow the instructions in the HP Support document: Windows 8 Product Activation. This document will walk you through reactivating your Windows 8.
I hope I have answered your question to your satisfaction. Thank you for posting this issue on the HP Forums. Have a great weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

System problems after upgrade

now I really cannot understand this upgrade to 5.0.1.. my computer worked just great with the 4.9 version and now I had several iTunes-crashes, problems with the internet connection WLAN(which suddenly occurred after the update) and even a failed installation of the sony ericsson k750 "pc suite" software due to an "unsolved problem" in QT7.
I am really dissapointed, this software is just not ready for public use and my whole system has started to act weird. if someone can help please do so!

hi bo2400!
My notebooks connect to the internet through a Dlink -614+ router. The result was a very slow internet connection and crashes.
okay, i know that for at least some D-link routers, D-link now has instructions at their website on how to get them to work properly with itunes 5.0.x. there's a link through to the D-link website in here (not to your particular model, i believe, but there should be information for your one somewhere on the site):
Roger Cowan1, "BT Broadband (UK) Killed by iTunes 5" #12, 05:25pm Sep 19, 2005 CDT
for the QT 7 conflict ... it definitely doesn't sound like the problem i've been worrying about. unfortunately, you're the first report (that i can recall) of that particular problem here in "Installation & Upgrades".
it might be worth checking/posting in the "Quicktime for Windows" forum in case there's been some troubleshooting done on this over there. (not trying to get rid of you ... just trying to get you on the right radar screens.)
it can help give context to any post over there if you provide a reference link back to this thread. there's instructions on how to do that given in here:
sysop, "Stylize Your Posts (The Editor)", 09:41am Aug 4, 2000 CDT
love, b

System problems after Security Update 2007-007 install

Hello all,
I am having problems with my computer after installing the 2007-007 security update. Specifically, the keyboard and mouse become non-functional at random intervals. The system has not frozen up, though, as items on the screen continue to update. Each time this has happened, I have had to ssh into the machine from another one and reboot. I am on a dual G4 Powermac, 867 MHz with 2 GB of RAM running OS X 10.4.10. Does anyone have any suggestions on what could be causing this?

Hard to say. Have a bootable backup of your installation before the update? Did you repair permissions and repair the disk before installing? How soon after rebooting does the problem come back? Have you checked the console and system logs?

T40 missing or corrupted \windows\system file after recovery process

My T40 Thinkpad had a corrupt drive so I secured the recovery disks from IBM to rebuild the hard disk. The recovery process seemed to work well, but when completed and prompted to remove all disks and reboot, the system booted and failed before Windows XP loaded with an error message that the windows\system file was corrupt or missing. Any recommendations on how to succesfully recover? Thanks.

boot off the WinXP Disc and run a repair. Did it mention the boot.ini file being corrupt, or something else?
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

System problems after installing iphone & itunes

I'm wondering if anyone else has noticed a weird problem with their computers after installing the iphone & itunes.
Up untill i got the iphone, my computer was working fine. Now about every 15 - 30 mins, i get a few seconds of static sound from my speakers, and my monitor flashes in a way i can only describe as static on a tv screen.
i've been trying to figure out what the problem is, and thought it was just my copy of windows xp, then i noticed that every so often, my iphone will buzz either right before or right after the static hits my computer. I've also seen the same thing on another computer running windows vista, so at this point, i don't think it's the computer, and the issue never occured before installing the iphone.
Can anyone help me troubleshoot what is causing this, (or at the very least stop the static sound from the speakers so that it does not interfere with my music).
Any help would be appriciated, this is currently the biggest problem i have with the iphone.
thanks,
r.

Hi - yep, it's your phone causing the problem. But this isn't unique to iPhones, many (most?) cell phones will create this problem when placed near certain other electronic devices. I haven't been able to put my cell phone on my nightstand for years because it makes the radio/alarm clock buzz.
I don't happen to have problems with my iPhone near my computer screen or speakers, but it makes my alarm clocks and my cordless home telephones buzz like you described.
I believe the cell phone is essentially connecting to the mother ship to establish a signal! Like I said, this isn't unique to the iPhone. Just move it away from your screen/speakers and you'll have fixed your problem

System problems after 10.4.5

After attempting the update in the software updater (which I will never do again), it failed to update. I downoladed the delta updater and ran it no problems, rebooted, and now spotlight won't work. It comes up but no matter what I type in there are no results. I attempted to repair permissions, but disk utility comes up and keeps searching for volumes, and stays that way, I made an attempt at an archived install of 10.4.0 and then upgrading to 10.4.5 again, but the installer on the DVD could not prepare my hard drive, or whatever the first step is after verifying the DVD. Also, sytem profiler freezes up when I attempt to view my hard drive info.
Mac mini Mac OS X (10.4.5)

Hi Steve, let me get this right, you were trying to perform a Software Update from 10.4.x to the latest 10.4.5 and the update failed?
Did you perform the necessary steps below?
-Repair Disk Permission before and after the update
-Remove all external devices, unplug them and leave only the keyboard/mouse and internet connection before the update
You can try downloading the Combo Update, perform the above first and apply the update, and see if that works
Good luck and cheers!

System problems after applying patches

Hi all,
I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
Do you have any idea what could be the problem?
We restored the system and now I got a similar error already when updating SPAM.
Thanks & Regards
Cornelius

Hi,
Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
---Satish

Satellite C75 - Performace problems after recovery

After I recovered my Satellite C75 back to factory settings (that took severala hours) I suffer from drastic performance problems. Games that were running with 50 fps now are having about 10fps.
What might be the problem and what to do?

Im quite sure. And dfference is huge. I thought that maybe thats something to do with updates, but nothing have changed.

Qosmio G30 - system problem after recovery procedure

Similar Messages

Maybe you are looking for