Qosmio X300-15R - Touchpad on/off doesn't work on Windows 7

Hi
In the past i have used the Fn+ F9 to stop the touchpad from working (i usualy had a mouse nearby and that works better), now i tried to use it again and it doesn't turn on anymore?
Only windows 7 (64bits) has been installed since.
what do i have to do to get the touchpad working again?
(i've already tried to install the value added package but that gives an error on instal)
With kind regards
P.S i am using speedfan to cheak my grafic card temperature because the laptop has been shuting down in the past (never does that with windows 7 though)
and the temperature of the grafic cards gets over 100 degrees celcius, when plating the biggest games, is that normal?

Well i stil haven't found a solution to my touchpad nor the temperature and now i've got an other issue.
While it was working yesterday fine my laptop isn't making anymore sounds all of a sudden, i've done a system recover from last week but it still isn't working.
Any clue's what to do to make it work again?
with kind regards
Edit a driver update for windows7 seems todo the trick.
i still needa sollution for my touchpad btw. (the red bar above it is glowing red), ain't sure if that means its on though
Message was edited by: arcan

Similar Messages

Qosmio G30 - Media center remote control doesn't work in windows

Dear All,
I have Qosmio G30-194,
first i had a problem with the VGA , i send it for repair, when it comes back i noticed that the remote control is not working on windows Media Center, while in A/V mode it work perfectly.
I tried to do full system restore from the recovery DVD, but nothing changed, even i installed Windows Vista with all of its drivers.
Nothing changed also, I borrowed a USB IR received for another remote control it worked perfectly with my remote on windows.
Please advise me what to do, do i send it back to the service center , or there is an easier solution.
Mazen Habbal
N.B, : My laptop info are:
Model Number PQG32E-01P018AR
Thank you in advance

don't expect toshiba to fix problems like this.
they replaced motherboard on my laptop and ever since the remote was not working.. it would turn the laptop on but was unresponsive thereafter. thing's we have tried:
- install software and drivers for remote again
- reinstall windows
- replace reciever
- change motherboard
- change remote
- terminate and restart relevant processes
- downgrade bios
- update bios
- combinations of the above
on several occassions Toshiba told me they were able to replicate and solve the problem but after trying it on my laptop they remembered that actually their one was slightly different.
almost a year later, i still have a non-working remote
my theory is the laptop leaves factory with certain software which Toshiba fail to include in recovery partition and\or bios that is available through them... so once you lose the factory components (i.e.the original motherboard) you also lose some necessary files with them.

Qosmio x300-15r: After recovery windows say: worg/incorrect product key?

Hi guys.
Well this is what happend. When i bought my laptop Qosmio x300-15r I made a recovery cd.
But I lost those cd's and burn another one recovery cd.
Now that i formated my windows with the recovery cd, and I want to log in He give me the
error: wrong product key,. but it's wierd, cause this product key is writting on the back of my notebook
So how can it be worng???
Does someone have a clue??
Greets
Cheng.

Hi
I dont understand.
Toshiba Recovery disk is already activated and there is no option for entering the serial key.
If you use the Toshiba recovery disk you will not be asked to enter any keys!!!
The serial key at the bottom of the unit belongs to the Toshiba installed Windows OS and cannot be used with other Windows versions.

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

Lync screen sharing doesn't work in Windows 10 Technical Preview (9879 Build)

Why Lync screen sharing doesn't work in Windows 10 Technical Preview?
It works well Windows 8.1, but why not in Windows 10?

Hi PriTeddy,
Thanks for your feedback.
As Paul Adare said, Microsoft has noticed such issue, they are listed in following blog:
http://blogs.windows.com/bloggingwindows/2014/11/12/new-build-available-to-the-windows-insider-program/
Some known problems:
As with the last build, you’re getting hot-off-the-presses code which means there are a few issues. We’ll be publishing WU updates shortly to fix the first two, but the remainder will not be fixed for 9879.
•In some cases you may get a black screen when trying to log-in or unlock. The only option is to hold the power button to hard reboot.
•You will be unable to connect to Distributed File System network locations.
•Some systems may see disk growth of 20GB+ due to driver install duplication. On systems with low disk space this can block setup and cause a rollback to the previous build.
•Skype calls will disconnect and Music will stop playing if those apps are minimized.
•There are several known issues with screen sharing with Lync.
Let’s wait for next builds.
Alex Zhao
TechNet Community Support

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
tt2

"Email me" doesn't work in Windows

Has anyone found that the "Email me" button doesn't work on Windows machines? I have just been told by one or two visitors to my website (www.aroundthebusch.com) who use Windows that the buttons didn't work.

It may be a Flash Security issue... upload SWF to server, open it to browser from there and try your links again...
Here´s one SWF exported from indesign (links to email at page 3):
http://www.edocker.com/_demo/edocker-online-demo/index.html

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix?

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix? All that happens is two text pages open, but no Director. I have downloaded and installed latest full software version DJ2510_1313. Any help for this?
This question was solved.
View Solution.

Hi DJ2512,
I understand you have a Deskjet 2512 that is not able to open the Printer Assistant, it opens to text pages. I'm sorry to hear this, but I will definitely do my best to assist you!
From what you've described, it sounds like your Printer Assistant is opening to a Notepad page. I'd suggest that you follow this HP Printer Assistant Opens with a Script Error or in Notepad document to get the issue resolved.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Tap-to-Click doesn't work on Windows 8

Hi all. I'm using bootcamp for two weeks, and Trackpad's tap-to-click feature doesn't work on Windows 8 x64. Can you help me please? Thanks a lot.

Aah, thanks a lot. That's so easy.

HT1589 This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

My apple magic mouse doesn't work in windows 7 after installing maverick os x

My apple magic mouse doesn't work in windows 7 after installing the maverick operating system on my mackbook pro. How do I fix this problem?

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

Qosmio X300-15R - Touchpad on/off doesn't work on Windows 7

Similar Messages

Maybe you are looking for