QR Code capacity with fixed rendered size and dynamic data

There's a paper forms barcode and symbology is QR Code, layout is 46mm x 46mm, error correction level is M, module width is 0.592mm, and max capacity is Chinese(UTF8) x 88 or number x 627 or uppercase A x 380 or lowercase a x 263, and QR code renered size is about 30mm x 30mm when max capacity.
So, my question is, if I want to ALWAYS keep this QR code renered size is same as max capacity(30mm x 30mm), but my daya is dynamic and mix numeric, alphanumeric and byte mode, is there any formula to calculate how may character such as space should be appended?
thanks

The more data you stuff into the barcode, the bigger it will be. I am not sure that there is a formula you can use to calculate how much buffer space you need to keep the barcode the same size. At least I have not seen one.
For Designer, we offer these guidelines when using paper forms barcodes: http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000342.html

Similar Messages

Fixed Lot Size and Assemby Scrap

Hi Gurus,
I've an issue using a Material with Fixed Lot Size (MRP View) and Assembly Scrap.
The system doesn't increase the base quantiy (creating a Process Order) with the Assembly Scrap defined in the Material Master, if you change manually the quantity in the COR2 quantiy will be recalculated correctly.
Anybody can help me?
Thanks
Marco

>
Marco Spinell wrote:
> Hi Gurus,
> I've an issue using a Material with Fixed Lot Size (MRP View) and Assembly Scrap.
>
> The system doesn't increase the base quantiy (creating a Process Order) with the Assembly Scrap defined in the Material Master, if you change manually the quantity in the COR2 quantiy will be recalculated correctly.
> Anybody can help me?
>
> Thanks
> Marco
dear marco,
One changes in my earlier post
IF fixed lot size is 1000, and assemby scrap as 10 %
if the pir is for 900
after running MRP system will create a plan order for 1000
In MD04 , you can see the receipt reqmt as 900 and scrap as 100
i.e System will allocate the scrap with in the fixed lot size
Once the plan order is converted in to process order you can see
the total qty as 1000 and scrap 100
for other lot size system will add the PIR reqmt +assembly scrap %,
Yes you can change the qty in COr2, system will update as per the scrap qty , i.e system will allocate the qty for scrap
for ex , if you are changing the total qty as 10000, system will propose 1000 as scrap,
when you save the order and see the mD04
you can see the receipt/ reqmt qty as 9000 and scrap as 1000
i.e system will allocate the 1000 qty from total qty
Hope you are clear how the fixed lot size is working for assembly scrap

How to fix the size of table data in html

I want to fix the size of table data in html. ie if i want to insert only 50 char in a <td> field then it contain only 50 character, after that it switched to another line and contain the remaining character. Means <td> field wil not get automatically adjust there size according to data.

you cant specify how many characters a td cell can have but u can specify the pixel width of a td cell
<td width=50>
as long as you have wrap text on, then text will not force the box size over the 50 pixels
this wont limit it to only 50 chars though, you will probably have to use some javascript to cut the string down to size (unless youre using something like php or asp then that will do the trick too)

Get Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

how to get SQL server Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

Hi Shivanq,
To get a list of databases, their sizes and the space available in each on the local SQL instance.
dir SQLSERVER:\SQL\localhost\default\databases | Select Name, Size, SpaceAvailable | ft -auto
This article is also helpful for you to get DB and Log File size information:
Checking Database Space With PowerShell
I hope this helps.

SNP quota arrangement with fixed lot size

Hi all,
i have a question regarding quota arrangement for external procurement in snp heuristic. Whe have 2 sources of suppy created by info record. The quota is 25% for the first and 75% for the second one. In product master there is maintained a fixed lot sice of 500.000. Im wondering that the snp heuristic creates 2 requisitions of 500.000 for each sos at the same day. So we get an serios excess. Any ideas?
Kind regards,
Christian

Hi,
thanks for reply. Ok, normally net requirement calculation works properly. In case of a shortage the heuristic shall apply an receipt with the fixed lot size wich is maintained in material master. However, in out particular case it generates the double receipt quantity which is not needed at the receipt date.
The heuristic should do the following:
Day 01 Stock 100
Day 02 DepDmd 20
Day 03 DepDmd 20
Day 04 DepDmd 20
Day 05 DepDmd 20
Day 06 DepDmd 20
Day 07 PurReq 100 !! Source 1!!
Day 08 DepDmd 20
Day xx PurReq 100 !! Source 2!!
and not:
Day 01 Stock 100
Day 02 DepDmd 20
Day 03 DepDmd 20
Day 04 DepDmd 20
Day 05 DepDmd 20
Day 06 DepDmd 20
Day 07 PurReq 100 !! Source 1!!
Day 07 PurReq 100 !! Source 2!!
Day 08 DepDmd 20
In this example 100 would be the fixed lot size from material master.
Best regards,
Christian

Fixed lot size and Minimum lot size

Dear senior,
My client has the following scenario. His supplier provides the item in a fixed lot size of 100. The minimum lot size to be ordered is 300.
The supplier is a fixed vendor.
I tried to maintain this information in the Material Master MRP views. Lot size - FX, Fixed lot size - 100, Minimum lot size - 300.
However, everytime, the minimum lot size will get reset.
Is there any way , I can maintain this scenario via configuration or any other method?
Thank you.

Hi,
Fixed lot size - 100 means for every 100 quantity system will create one purchase document.
If you selected Lot size - FX - Fixed order quantity , then no need to maintain Minimum lot size & Maximum lot size fields.
Then you have to maintain Fixed lot size filed only.
Ex:
Lot size = FX
Fixed lot size = 100
There is a requirement of 300. Then system will create 3 PO's with quantity of 100 each.
If Lot size is Ex - Lot-for-lot order quantity, then only need to maintain Minimum lot size & Maximum lot size fields in the MRP 1 view.
Ex: Lot size = EX
Minimum lot size = 60
Maximum lot size = 100
There is a requirement of 250. Then system will create 3 purchase documents, two documents with the quantity of 100 and third one with the quantity of 60.
That's why, in your case system is reseting Minimum lot size every time.
If you want to maintain Minimum lot size, then maintain
Lot size as EX
Minimum lot size = 100
Max lot size = 300
It will solve your problem.
Regards
KRK

Adding text to indesign pages with specific font ,size,and color using javascript

Hello,
Using javascript i am able to add some text to each page of an indesign file.
myNewText = "SOME TEXT"
myTextFrame = myPage.textFrames.item(0);
tempframe = myTextFrame.contents;
myTextFrame.contents = myNewText + tempframe ;
But i want to specify the font used,size and color for that text.
When i try the code mentioned in indesign javascript scripting guide
myNewText .appliedFont = app.fonts.item("Times New Roman");
myNewText .fontStyle = "Bold";
nothing gets changed and font family already used stays the same.
How can i do that only for the added text and not for the whole content?I dont want to add the text to a new text frame I want to append it to the existing text frame.
And is there a way to specify font size too?
thank you

There's a mixup going on here. Let's see if we can sort out some of it
at least.
If you just want to add new text to an already existing text frame,
that's easy:
myTextFrame.contents += "Hello";
But if you want the new text to have unique formatting, it's a little
more complicated.
There are two simple ways to do it, I think:
1. Create a temporary text frame, as you have done, and add the text,
and format everything in there. Then move() that formatted text to the
end of myTextFrame and delete the temporary frame:
tempFrame = app.activeDocument.textFrames.add();
tempFrame.contents = "New Text";
tempFrame.paragraphs[0].appliedFont = app.fonts.itemByName("Times New
Roman"); // etc...
tempFrame.paragraphs[0].move(myTextFrame.insertionPoints[-1],
LocationOptions.AFTER);
tempFrame.remove();
2. The other option, is to add the text directly to your textFrame. But
if you want to format only that text, you have to store where the text
started:
myTextFrame = app.selection[0];
firstInsertionPoint = myTextFrame.insertionPoints[-1].index;
myTextFrame.contents += "New Text";
myAddedText =
myTextFrame.characters.itemByRange(myTextFrame.insertionPoints[firstInsertionPoint],
myTextFrame.insertionPoints[-1]);
myAddedText.appliedFont = app.fonts.itemByName("Trajan Pro"); // etc.
What you've done in your sample script, however, is to try to apply a
font to a simple JavaScript string. It won't work, but the way you did
it, it won't throw an error either, because in fact you've created a new
property of your string. (myString = "Hello"; myString.appliedFont =
"Times"; // myString now has a Javascript property called appliedFont --
but that's nothing to do with InDesign!)
HTH,
Ariel

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Combination of Fixed Lot size and Period lot size

Dear all
I have scenario as follows:
1. My supplier's standard packing size of a raw material is 1000 EA.
2. I want to follow period based lot size to optimise my order and inventory cost. But I don't want to use dynamic lot size which will propose dynamic quantity.
So my requirement is like I want to fix lot size as 1000 at material master and Period is Week. My proposal quantity must be 5000 EA for the following demand pattern:
Week 1:1200
Week 2: 1000
Week 3: 1100
Week 4: 1000
System must consider period as well as fixed quantity.
Kindly throw some light on this.
Advance thanks.

Hi
1.As you are looking for Weekly demand demand quanityt , you have to assign Weekly Lot Size : WB.
2. Goto OWD1 and Create a Rounding Profile which will rounds into Weekly Demand quantity for that plant and simulate .
3.Assign this rounding profile in MMR in MRP1
3.DO NOT assing rounding valu as 1000 .Rather keep it blank
Hope this will solve the problem
Regards
JH

PO report with cost center, order and delivery date

Hi,
pls. I just need a report to display the next fields Account Assigment and Delivery Date.
I attempted with standard reports like ME2N, ME2K but it is impossible to display all the information in the same screen.
Thanks a lot for cooperation.
Regards.

HI,
Create a Infoset query or ask ababper
Tables EKKN, EKPO, EKKO
Regards,
Pardeep Mlaik

Missing Image Size and Position Data

In AI CS5 the size and position of an image were displayed in the top toolbar when you selected the image. This is missing in AI CS6, how can I get it back?

Well I did discover that what I need is called "Transform" but it's already checked in the menu you suggested. In fact EVERY box is already checked in that menu, and checking or unchecking them from that menu has absolutely no affect on anything anyway.
I found that I can expand one of the menus from the right side, and the "Transform" box is there, and that's fine. But that data (object size and position) was very useful when displayed on the top toolbar in CS5. Any idea how to make it appear in the top toolbar? It will un-dock (and is very difficult to re-dock)

Is it possible to combine a address list with a Pages document and a data base in Numbers, the equivalent of "Mail Merge" using Microsoft?

Is it possible to combine an address list with a Pages 5.1 document and a data base in Numbers 3.1, the equivelent of Microsoft "Mail Merge"?

It is possible in Pages 09 and Numbers 09 but not in the versions you name.

Please help with restoring different apps and their data between 2 iPads

I just bought a new iPad Air 2 . I currently have 2 iPads, 1st gen and iPad 2nd, each with its own set of apps and their data. I backed up each older iPad manually as a full backup. I created a separate library for one of them when doing this. Now I want to transfer iPad 1st gen apps and data to iPad 2nd, so I reset iPad 2nd to factory and then restored from the manual back up of the iPad 1st gen and it seems to work fine. Before that I had backed up iPad 2nd's current data. So now I now I want to transfer the iPad 2nd apps and data to the new iPad Air. I selected the backup by the time stamp that I had backed up iPad 2nd. I didn't know how to rename each iPad to something unique. It restored from backup, but it's all the apps and data from my iPad 1st gen backup, not iPad 2nd.
I'm utterly confused. Even when I have the separate iTunes library open it shows all the manual backups I performed, so it's not truly a separate library. Do I need to manually install/remove the various apps on the newer iPad?

If you only have 1 file per quarter, one obvious thing to do would be to edit out the time in between plays, the time-outs, and the like. That is easily done in iMovie.
Having said that, importing (and exporting) in high definition takes time, and your times do not seem unreasonable.
Message was edited by: AppleMan1958

JSF and dynamic data

Hi,
This is not a specific question but rather a high level concept that I'm trying to figure out. I have a system that uses a lot of dynamic data that is handled and viewed in the form of Dynabeans as well as SDO data objects.
I'm working on trying to develop reusable web widgets such as input forms based on these objects and thought of JSF right away.
However its seems like JSF will only work with static data models because the beans and bean properties need to be specified at design time in the xml configuration files.
Here it is: Lets say I have a dynamic java bean with dynamic properties that was created from a metadata object. Now I want to develop a single reusable JSF widget that will create an input form using the information from the metadata object and then connect the widget values to the actual dynamic data object.
Seems like in order to do this, the properties of the dynamic data object need to be defined at runtime so that you can classify it as a managed bean so that JSF knows how to bind values from a widget to a bean.
Does anyone have any thoughts?

Hi.
ValueBinding and MethodBinding work through PropertyResolver, VariableResolver
#{aaaa.bbbb.cccc}aaaa - will be resolved with VariableResolver (root object)
bbbb and cccc - with PropertyResolver
Look at the description of the default realisation of VariableResolver
You will see in which places it searches for a root object. At least it searches in the request, session and application maps. You can just put your dynamic beans in one of this maps.
At the worst case you can substitute implementation of the VariableResolver in faces-config.xml
<application>
<variable-resolver>com.qqqqq.MyVariableResolver</variable-resolver>
<property-resolver>com.qqqqq.MyPropertyResolver</property-resolver>
</application>
...Good luck

For those with pixel rendering issues and slowness issues

For anyone who doesnt know these little details when designing in Catalyst, I thought I would share and hopefully ease some peoples frustrations. Lets kick off with pixel issues.
You have either vector, raster, or components that are either: not aligning with everything else around it, even though it has the same X/Y value, the rounded corners of a rectangle vector object are distorted, or anything else you have experienced with pixel distortion or pixels just not lining up properly. Here is the issue. When you drag and drop an object from the library, wireframe components, or draw a new shape, it can have a decimal level pixel value. It does not say this in the property inspector though. So you may have a rectangle at a listed X/Y of 10,15 but it could actually be 10.3, 14.9. To fix this you have to type in a new value of at least 1 number higher or lower. Deleting the value and typing the same number in doesnt do anything. Neither does moving it with the arrow keys in hopes of it moving it to a whole pixel value. The arrow keys move by 1 pixel (or 10 if holding down shift). This should take care of most of your problems.
Now you may still have problems with the corners of rounded rectangles if you converted it to an Optimized Vector Graphics. For you Flash Pro users, from what I can tell, using "Optimize Vector Graphics" is basically the same as (in Flash) converting a vector shape into a MovieClip and in the property inspector, checking the "Cache as Bitmap" box. That option has Flash create a bitmap version of the vector shape so that it will not be re-drawn every frame, which is what the Flash player does with vector objects. So because it is converting your vector into raster, it kinda has issues with rounded corners when you have a stroke on the shape and pretty much only if you have a stroke. If you take the stroke off, and use Optimize Vector Graphics, you shouldn't have that problem anymore. But what if you needed that stroke? Simple, duplicate that shape, change its fill color to what you want the "stroke" color to be, increase its size by 2 pixels on the width and height for every number of thickness that you wanted with the stroke, and then set the X/Y of the "stroke" rectangle to a pixels less for whatever the "thickness" of your stroke is.
Example:
Rectangle - width:20, height:10, desired stroke thickness:2, X:10, Y:10
Rectangle Stroke - width: 24, height:14, X:8, Y:8
Rectangle - width:100, height:30, desired stroke thickness:1, X:15, Y:27
Rectangle Stroke - width:102, height:32, X:14, Y:26
It wont look perfect but its pretty close if you do this and then draw a rectangle beside it with a real stroke. And if you still want to use Optimize Vector Graphics on it, just group the two rectangles together and then use Optimize on the group and no more distorted corners. This also applies to vector shapes in Flash Pro.
Lastly to talk about the slowness of Catalyst. You may or may not have read the posts from Adobe employees, but I can tell you that having fewer states helps with the responsiveness of it, but so does using the Optimize Vector Graphics as much as possible. I am working in a large scale project, and just from me converting all my vector background shapes, which was around 13 used across 6 main states, it helped significantly with Catalyst being more responsive for me.
Hoped this long post helped some people with any similar issues you might be having.

I noticed with my Charge phone that when I get a call the FIRST ring is highly muted (quite soft) and then all rings after that are full volume.
I wish that even the first ring was load (full volume) but I accept the fact that that is how GB 2.3.6 works. Anyone know how to change this?
Ya can't win 'em all.
JerryF

QR Code capacity with fixed rendered size and dynamic data

Similar Messages

Maybe you are looking for