QR Codes using SAP Adobe forms

Hi,
We are printing QR code labels using SAP Adobe forms and using Zebra printers (Z4MPLUS, ZM400 ) for this. Size of the QR code that is being printed is small and we want that to be printed bigger than current size.
Could anyone help us on how to increase the QR code size? We have tried changing the module height and width in XML Source, but no luck.

Hi,
Does anyone have a solution for this ?
We have the same issue on ZM400 and GX430 Zebra labelprinters.
The QR barcode is printed very small on the label.
We changed ModuleHeight en ModuleWidth in de adobe xml source.
We changed the QRCode en CodeQR to "software" support in both XDC files : zpl203.xdc and zpl300.xdc.
However after changing the XDC file from "hardware" to "software" support, the QR barcode is not printed on the label.
Any suggestions ?
The QR code is displayed correctly in de Adobe LiveCycle Designer (with the correct size).
Thanks in advance.

Similar Messages

Vb script to get fields name of SAP adobe forms

hi
is there any way to get and set fields of SAP adobe forms embedded in SAP portal

I think when I tried to process each PC name from text file against registry key value, above code not working. As per my knowledge some issue in loop. Do I need to add FOR EACH feature?
Please help to correct it. Thanks in advance.
Your code contains numerous errors. Furthermore you make things difficult for yourself by giving similar names to the objects used for your input and output. If you are a systems administrator then your best bet is to make an effort to learn the language
instead of grabbing a few code fragments from here and there and hoping that somehow they will work.
Try the cleaned up code below for this particular project. Note the consistent code indentation. It helps you enormously when trying to understand the structure of the code. Remember also that you must fully qualify all file paths. Writing to "Destination.txt"
will cause endless confusion because you never know for sure where this file will reside.
Const HKEY_CURRENT_USER = &H80000001
Set oFSO = CreateObject("Scripting.FileSystemObject")
sKeyPath = "Environment"
sValueName = "LSFORCEHOST"
sFile = "D:\Test.txt"
If oFSO.FileExists(sFile) Then
Set oInput = oFSO.OpenTextFile(sFile, 1)
Do While Not oInput.AtEndOfStream
sComputer = oInput.ReadLine
If Trim(sComputer) <> "" Then
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" _
& sComputer & "\root\default:StdRegProv")
oReg.GetStringValue HKEY_CURRENT_USER,sKeyPath,sValueName,sValue
Set oOutput = oFSO.OpenTextFile("D:\destination.txt",8, True)
oOutput.WriteLine sValue
oOutput.Close
End If
Loop
oInput.Close
End If

How to create Hiperlink in SAP Adobe Forms

Hi Experts,
Can somebody assist me on how to create a hiperlink in SAP Adobe forms. At the footer we will display some text message like "........ for further enquires please visit out home page". When user double click on "home page" it should take him to to website of that particular organization. If possible to explain via screen shots then it will be a great help to me.
I know you can use "Button" option to call a link ( go to layout->Palettes->Library->Button) in Adobe form. I don't know where to specify website name(www.google.com).
Note: we can do it through binding but sitename is displaying in form (sitename should not appear in the form).
Regards,
Meera.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 29, 2009 9:58 AM

Hi,
Thanks to all who tried to give a solution but I found a solution to how to do it.
Just wann to share here.
Go to Layout(Click on "Layout" tab) Palettes-> Script Editor
you can see script editor here we have to code some Java script to call website when user click on some text.
app.launchURL("http://google.co.in", 1)
in your driver program you have to specifiy SFPDOCPARAMS-FILLABLE = 'X'. "Interactive form?
Regards,
Meera.
Edited by: meera2009 on Dec 30, 2009 4:37 AM

Using the Adobe Forms for printing through portal

Hi All,
I've got a problem with the fact that I do not know exactly how to use the Adobe Forms from the portal.
I've got the Form Objects done (Interface & Form using SE80) and they work OK when testing the form. The Interface gathers all the datas etc. and the form displays this correctly.
My problem now is that I need to have this form available from the portal, and this I presume needs some WebDynPro stuff or something else? I'm totally lost on this part ...
The customer wants to have a button or link in the portal that opens a new window with the produced PDF opened in the new window, much like opening a static PDF file. The user then has the option to print the PDF him/herself using Adobe Readers own print mechanism.
My interface has only one Import parameter (PERNR number) and one EXPORT parameter (default). The PERNR number must be supplied to the interface so that it can gather all the needed data based on this number.
Any help on this will be greatly appreciated and rewarded accordingly.
Thankyou in advance,
Kim

Hi Arnab,
from a forms point of view:
(I assume you have the ADS up and running on the Java stack. Without it, the form generation doesn't work.)
If you create your form in transaction SFP and execute the corresponding program that calls the form for testing in SE38, you get to the print dialogue. Here you may choose either locl or lp01 (or any other printer accessible through your network) and then select Print Preview. This should then display the PDF in SAP GUI.
If you are asking about general printer setup within SAP, check the corresponding documentation: http://help.sap.com/saphelp_nw04s/helpdata/en/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
Hope this helps,
Markus

What is use of Adobe forms

HI Gurus,
I have some doubts on adobe forms.
we are developing adobe forms for getting out put in PDF formate .
but we have same features in smartforms also like we can give the output in pdf to the client .
recently i faced this problem in pre sale actitvity .
Client manage asked me so many questions in adobe forms
questions are
1. What is use of adobe forms
2. we are can get the out put in pdf formate through smartforms . then why you are suggesting buy pdf licenced software .
3.what is extra functionality you are providing to end user
please can one give clear usege and advatages avalable in adobe
please dont tell as abaper point view please suggest me as a enduser point of view
Regards
RameshG

Hi,
Use of Adobe form:
As of SAP NetWeaver u201904 (in SAP Web Application Server), you can use a new solution to create interactive forms and print forms for the optimization of your form-based business processes. This solution uses Portable Document Format (PDF) and software from Adobe Systems Inc. that has been integrated into the SAP environment.
You can create interactive forms in PDF format that allow users to fill out the form on the screen and save their entries in XML format in the form. When the SAP system receives the PDF form, it extracts the data saved in the form, and can process it further.
Smart form Vs Adobe form
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms.
but, Adobe forms are used to post data into SAP from SAP too.
●      Create form templates for the layout that include logos or pictures
●      Generate documents by merging form templates and current system data
●      Edit forms online or offline
●      Forms can be filled in advance automatically with specific data from SAP applications and then sent to the correct recipients using secure methods
●      Automatic consistency checks for forms
●      Activate enhanced functions such as comments
●      Digital signatures and form certification
●      Send completed forms to the SAP application with automatic updates of the business data
For More reference,
http://help.sap.com/saphelp_nw70/helpdata/en/32/20709747d649e8bc74e084d0b2432c/frameset.htm
By
Parthi

Inserting/Embedding PDF documents to an SAP Adobe Form

Hi all,
We have a requirement to insert/embed an external PDF documents to an SAP Adobe Form.
Please provide pointers in this regard.
Thanks,
Sandhya

Tim, a change like this is really simple.
Formcalc and javascript are pretty similar - when I started developing AIF a year ago, I knew nothing about either of them... not that I know a whole lot now...
The Help in Livecycle designer is actually quite helpful when it comes to scripting. Also, there's a google group you can join where you can email questions for help.
You would just call the form like you normall do. The code is placed INSIDE your form "under" your field. There is a script editor built in to Adobe - Click Pallettes -> Script Editor to see it.
there are many events on which to place code - you will need to find an event that triggers early - such as Form:Ready etc...
Here's an example I have with 2 radiobuttons and a text box. If my 'yes' radiobutton is chosen, I make my input box visible
if ( yes.rawValue eq "1" ) then
data.Page2.grp2.func.rb.ifyes.presence = "visible"
endif
Same concept if my 'No' button is chosen
if ( no.rawValue eq "2" ) then
data.Page2.grp2.func.rb.ifyes.presence = "hidden"
endif
Both of these scripts are in the "click" event of the radiobutton.
Lastly, here's a link to a great resource on Scripting
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
Scripting, on a moderate to small scale, will make your life a bit easier. Don't try to do too much, otherwise you'll find AIF may be the wrong tool for what you're trying to do.

SAP Adobe form configuration

Hello,
I am new to SAP adobe forms. For configuring output type to a particular business activity, we go to NACE. There we can attach if print output type shoud be a smartform or sapscript. But I don't seee option for Interactive Adobe form. Where do we link Adobe form for output type ?
I assume my question makes sense since I am new to Interactive form.
I appreciate your inputs and guidance.
Regards,
Rajesh.

Solution: There is not configuration such as NACE for adobe forms. The interface in transaction ocde SFP defines the ouput that can be used for a given business transaction.
Thanks.
Regards,
Rajesh.

Fonts installation SAP Adobe forms

We need to install following fonts in the SAP Adobe Forms landscape.
Question is are the following fonts available with Adobe :
Helvetica Neue Light (Standard/Bold/Italic)
Superior Title Black (Standard/Bold/Italic)
Universe 45 Light (Standard/Bold/Italic)
The fonts need to be in .TTF format
Where can I find the steps to install the fonts into SAP.

I don't really understand what you mean by "available with Adobe". First let's clarify the product: I'm guessing Adobe Reader, but perhaps Adobe Acrobat. (Adobe are the company, they have dozens of modules). However, it isn't clear in what way any Adobe product integrates with SAP, as opposed to displaying content generated by SAP.
If by "available" you mean "included", NO. There are hundreds of thousands, perhaps millions, of fonts. Only fonts needed for correct operation are included. But
1. PDF files can "embed" fonts. This is strongly recommended because then the font is not needed by the end user. Perhaps you are asking about embedding rather than displaying?
2. Fonts are not installed "into" Adobe software; no idea about installing fonts into SAP. That's not our department. Adobe software and perhaps SAP just pick up the fonts installed in the system in the usual way.
Many companies make fonts, and many companies sell the same fonts. You need to verify the license on the font (fonts have licenses like software) allow your intended use. If you want to distribute fonts to your end users you will need a special license indeed. You can start with Adobe's font shop: Buy, download fonts | Adobe Type

Create Address in Sap ADOBE Forms

Hi Everyone
I have created a purchase order in Sap ADOBE Forms. I am using the BAS to show a "DELIVER TO" address. The address is totally correct. The only problem is that at the top of the address field the word "COMPANY" is displayed. I have tried everything to remove this additional line which contains the word "COMPANY" but nothing works. I have searched through the available Sap Adobe threads on this website but I did not find any solutions to my problem.
Can anyone help or atleast point me to the correct thread, if there is a correct thread for this problem?
Sephiroth

Hello, I guess there is some type of flag in the address structure which says "this is the company". And this has more values I guess. And I hope one of the values is something like "type unknown" where the word company won´t be used. That is what I would try to look for. Otto
p.s.: have you already visited: http://help.sap.com/saphelp_nw04/helpdata/en/12/ad79815c5811d3b4ea006094192fe3/content.htm

Standard SAP Adobe Forms

Hi All,
I am new to SAP Adobe Forms and have a quick question.
I need to create the output for order confirmation and invoice in Adobe Form. Does SAP provide any
standard Adobe Forms out of the box in ECC 6.0 for these outputs. I will greatly appreciate if anyone
can help me with the names for these.
Thanks a lot,
Vamseedhar K

Hi,
we can find the standard forms and templates in SFP.
search with the same name as script and smartform adding '' at end (ex:medruck->press f4).
Thank U
Jay-----

Timewrite across company codes using SAP CATS.

Hi Experts,
Want to know please, Can we timewrite across company codes using SAP CATS.
Thanks,
Muhammad

Hello,
You surely can.
When the employee enter his time there will be the respective field to identify the cost center or the one you want to assign.
If you are using the Worklist, bear in mind to correctly have those codes assigned and I would mention to filter the worklist via CATS0001 user-exit to show only the correct ones (which are relevant for that employee).
Regards,
Bentow.

Insert/Embedding PDF documents to SAP Adobe forms

Hi all,
We have a requirement to insert/embed an external PDF documents to an SAP Adobe Form.
Please provide pointers in this regard.
Thanks,
Sandhya

I would think the common sense approach would be to upgrade to ECC 6 first then migrate your forms.
This seems to be just another step in the upgrade process.
We went from 4.7 to ECC 6, but only had Smartforms and SAPScripts. We wound up just re-creating the forms directly in Adobe.

Preconfigured SAP Adobe Forms

Hi All,
Can someone tell me where do I find the list of preconfigured sap adobe forms for EHP4/5?

Hi,
Did you try to check from the tranasction SFP
1. Execute SFP and choose FORM
2. * and F4 you will see all the forms that are available in the system.
IF you are looking for specific adobe forms with respect to business process then you need to check from SPRO transaction or else respective configuration table ....
Regards
Pavan
Edited by: Pavan Bhamidipati on Dec 14, 2011 3:49 PM

Use of ADOBE form with SAP workflow for R/3 4.6C

Hi All,
We are thinking of usage of ADOBE form feature as one of options to design workflow for creation and maintenance of Info record like Material Master creation. BTW the existing systems are EP 7.0 with the back end SAP ERP system 4.6 C
We would like to just check the feasibility of usage of ADOBE interactive form for above scenario. Would it be possible to go ahead with the above concept or what would be pre-requisites or risks involved?
1. How would system identify the role to direct the Adobe form for approval in case the form is raised by multi department?
2. How can the data validations in ADOBE form happen with reference to SAP std. tables?
An early reply would be appreciated.
Rgds,

Hi,
If you use EP 70 you can used guided procedure for your requirement .
Regards

Using Interactive Adobe Forms in LEAD processing(SAP CRM 7.0)

Hi,
I am new to Adobe forms. I want to create it for lead. After creation of lead adobe form should get mailed to required partner automaticaly. This partner will fill the data and send back to update the system.
Please suugest me any documentation to achieve this.
Regards,
Nikhil

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

QR Codes using SAP Adobe forms

Similar Messages

Maybe you are looking for