QT applications showing artifacts and gray windows in i3

Hi all!
Whenever I start an app like virtualbox(a 64bit app) or skype(a multilib 32bit app) that uses qt, I see almost entirely gray windows, and many weird artifacts around what has been drawn, such that I can't even use the application.
Has anyone seen this, or know where I should start debugging this issue?
Thanks!

QNativeImage: Unable to attach to shared memory segment.
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
QNativeImage: Unable to attach to shared memory segment.
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Is what's it's printing on the console there

Similar Messages

Preview a PDF inside my AIR application inside transparent and custom window

I have a transparent windows (skinnable). Inside, I'd like to preview some pdf file. BUT, in the only a black screen appear, can you help me?
Thanks

AIR does not support this inherently. However, you could write code to parse these file formats. For example, the following is an ActionScript 3.0 library for reading and writing Excel files:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1375018

My iPod Touch (4th Generation)is showing white and gray screen with a blur at the bottom right. It dosen't respond to resets or touch, but when I charge it it makes the charging noise

Have tried resetting, but does not respond to touch. It only does it if you hit the sleep/wake button but not every time

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

Today I tried to shutdown my computer and a window popped up saying that my computer could not shut down because the mail application was open, it wouldn't close, so I used a key combination to force mail to quit and now I can't log in. Help?

Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall

CS6 Applications all show update as grayed out

Hello all:
After a major system update of my 2010 Mac Pro 12-core where I have two startup drives (one with Lion and the other Yosemite), I did a complete uninstall of CS6 master collection applications on both drives. Upon doing the reinstall successfully on Lion without problem other than serial number issues (ultimately solved), when I did it on the Yosemite drive, ultimately only Acrobat (which updates alone) could update. All other applications on Yosemite have the 'update" as grayed out. Any ideas anyone?

Hello, it sounds like you have the Desktop selected, not an open Finder Window selected, this is what shows if no Finder Window is highlighted, or if just using the Find "Window", you need a Real Finder Window open or click on icon in sidebar...

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

How can I get Expose to show only and all active windows, regardless of app

Sometimes I have two applications running with several finder windows hidden on the dock. I'd like to know how I can (or if I can) get Expose to show only the Active windows - not the ones on the dock. With this new upgrade, it seems that all open windows that are on the dock appear in a row at the bottom of the screen, which takes up real estate - can I turn that function off so just the open, undocked windows of all apps show?

Sounds like you opened a message in a new window. Have you tried closing that window and see what happens?
If that is not it maybe you can post a screen shot of what you are seeing.

Flashing finder icon and showing "don't restore windows" and "restore windows" text box

hi, i hav problem with the flashing finder icon and showing "don't restore windows" and "restore windows" text box. im using macbookpro MAC OS X 10.7.5. i've search for solutions, lik relaunch the finder by pressing COMMAND+ALT+esc, but it didn't work for me...
any1 can help me, thx...

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hello, I'm not able to download itunes 10.5 on my dell laptop. It says that an error occured and to download separately and then install. However, this is stillnot working. Due to this I am not able to update any applications. I am using windows vista.

Hello, I am not able to download itunes 10.5 on my dell laptop. It says to try to download separately and then install. However, an error message still comes up. Due to this, I am not able to update any applications. I am using windows vista. If I reinstall itunes entirely, will I loose my many playlists that I have? And will this effect the same playlist that I have on my ipod???

Installing, and uninstalling, applications never touches or removes the data.
Clean out and uninstall all the apple programs and software thru Programs and manually.
Might want to use Revo and CCleaner
I always use manual standalone installers (and keep a couple backup versions)
itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
A search of these forums will show some threads.
I'd clean up vista, you need SP2 or later, and specific error message?
I wonder as you arenot the first with a dell if maybe the OS or included software.
Security programs like Norton and older versions of Kaspersky have been implicated.
Also settings in IE that affect pop-ups and plug-ins.

Why am I continually being asked my security question on my banking application when I use either Windows XP or Windows 7 and Firefox 3.6.13 but not on my Windows XP system with Firefox 3.6.3?

I have three computers, two run Windows XP. One of the XP systems has Firefox 3.6.3 and the other has 3.6.13 installed. The banking application login acts normally with Firefox 3.6.3 but each banking login requires the security question answered with Firefox 3.6.13. This happens on both the Windows XP system using 3.6.13 and the Windows 7 system using 3.6.13. Testing Internet Explorer on all three computers does not show the same problem with the security question.
I am unable to trace this starting with any particular Firefox update due to initially thinking the problem was with the banking website.
The login webpage is https://you.usersonlnet.com/asp/USERS/Common/Login/NetLogin.asp

I believe I've solved this issue by carrying out the following action:-
First cancel all “send and receive” operations in OutLook. Next remove all emails from your "Outbox" (by either deleting them or moving them to the “Draft” folder). Next shutdown OutLook and then click on the “Start” button on the lower left-hand side of the Window’s taskbar, then click on “Run” now type in “regsvr32.exe inetcomm.dll” without the quotation marks, so it looks like this:
regsvr32.exe inetcomm.dll
Note the space between .exe and inetcomm.dll and hit “Enter” on the keyboard.
The computer will execute the command. If all goes well in a few moments a dialog box will appear and state “dll registered successful
I have not had it hand since ... cross fingers ;)

Application Scheduling and Maintenance Windows

Hi There. I have a scenario that I want to get some clarification. I think I know how it will work but wonder if I'm understanding it correctly.
I have clients across a WAN that I want to deploy an application to but the bandwidth is limited and I can't put local DPs there. I want to prestage the content and then enforce its installation after the server side of the app has been upgraded
on Saturday.
The collection that the clients are a member has a maintenance window defined daily from 2am to 5am. I was going to deploy the app and make it available for tonight at 8pm thinking that the client would see the deployment and begin to download
it. The application deadline is set for 2 days from now on Saturday at 8pm. Am I correct in thinking that the client will install the application tonight at 2am during it's first available maintenance windows??
If so, my plan is to temporarily replace the daily 2am to 5am maintenance window with a maintenance window that starts at the deployment deadline on Saturday at 8pm. It seems to me that then the client would see the application, download it and wait
to install until 8pm on Saturday when it would be enforced. I also plan to hide the deployment so that it does not show up in software center.
Is my thinking correct?

If your objective is to prestage the content on the client cache, the only way I know that it works, is when the "available" schedule is reached, SCCM will evaluate the deployment and if applicable (meets requirement, detection rules, etc), it will automatically
download the content to the cache folder...
So, if you make it "available" today at 8pm and "required/deadline" for this Saturday 8pm, the clients will download the content after 8pm today (regardless of maintenance windows). The issue, as stated previously, is that if a user decides to go in the
software center app, they can manually trigger the install as soon as the deployment "available" date is reached (~today 8pm). You can configure the notifications...
The actual automatic install (triggered by the client agent software) will only happen on/after Saturday at 8pm; assuming that the maintenance window permits it. Be VERY careful with maintenance windows. If you have it set for 2am-5am daily, the deployment
will install on Sunday 2am-5am, as the window is closed on Saturday at 8pm (deadline)... Also the PC has to be powered on for the install to happen.
As with many things in SCCM, there is always other settings that can affect the result. E.g., you can set the deployment to install/reboot outside maintenance windows...
You may want to test this to confirm...

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Hi, I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, t

Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jade

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

QT applications showing artifacts and gray windows in i3

Similar Messages

Maybe you are looking for