QT Broadcaster wont record error 9408 broadcast state change

Broadcast -9408
[BroadcastDoc broadcastStateChanged:
I am trying to record something off Camtwist with out broadcasting and get this. Any ideas?
thanks

Similar Messages

Error in IMPORT statement: Change of length on conversion.

Hi this is an error i had when creating a source system for a client.
Runtime Errors CONNE_IMPORT_CONVERSION_ERROR
Occurred on 21.02.2005 at 14:08:20
The error probably occurred when installing the
R/3 system.
When importing an object, conversion would result in a length change.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONNE_IMPORT_CONVERSION_ERROR" C
"CL_W3_API_TEMPLATE============CP " or "CL_W3_API_TEMPLATE============CM007 "
"IF_W3_API_TEMPLATE~LOAD"
Can anyone please help me .
Thanks in Advance
SHASH

Hi All,
Above mentioned note will help but this will help you....
I got the solution for this issue for my kind of problem.
In program RPU600BT_CONV_SINGLE_CL we commented the following
START-OF-SELECTION.
IF 1 = 0. MESSAGE e567(3g). ENDIF. "#EC *
PERFORM append_message USING 1
space
'567' "report not necessary
space
space
space
space
'P'.
STOP. "check note 1314769 whether conversion is necessary
After this execute the same program and we will get the old results get converted.
And one more is we should be careful in checking SAPU & SPAD transaction codes. There shouldn't be any partially implemented notes.
Think will help at least one.
Regards
Aditya Surapaneni

Broadcast Error while broadcasting a template

hi...
I am facing error while broadcasting a template as a PDF file.
Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
I cant find any other details for this error.
I am able to broadcast the query.But i am not able to broadcast the template which includes the same query.
When i tried to assign a different query to thesame template, its working.It means that template is working fine.
The problem is the combination of the actaul query and actual template is not working.
I also checked with the support desktool and the configuration settings which are fine.
There are no error logs found. When we execute the template for broadcast it should initially communicate with the BW system and then from there we wil recieve mail.
But here when i am executing i am not able to see any logs in BW syetem, the report is not getting communicated with the BW system.
There are 4 queries with their corresponding templates for which templates are not getting broadcasted. The queries are designed for top n customers. These queries have offsets and also for one of the query there are exit variables.
I want to know that is there any problem with the query or some setting problem which will make the combination of query and template work properly i.e broadcasted properly.
Can anyone please provide some inputs????

this seems that the Portal engine set up with your companys portal and Web application designer is not working...
u mighte need toa pply OSS notes.
have you checked it on SAP service market place.

FMS broadcasting and recording

Hey,
I have Adobe Flash Media Server installed on ubuntu.
and I have some questions about operating it...
1. What do I need to do in order to stream a live H.264
broadcast?
will everyone who has a flash player will be able to see it?
do I need to use a special camera for that? or a special
player?
2. How can I record the live broadcast into the server
directly?
3. How can I add text on the live broadcast screen?[like
announcements, headlines and stuff]
4. How do I make the FMS require a password in order to
broadcast? meanwhile, anyone who knows the IP can use the server to
broadcast whatever he wants.
any help will be greatly appreciated,
TMO.

1) Lots of RAM and a decent Camera, the H.264 is better for
streaming pre recorded movies with a slight buffer, Live Streaming
will be slower.
Minimum FMS 3.0.2 as previous versions do not support H.264
2) FME allows you to stream live to the FMS server and also
record the stream for later viewing. I tend to record the stream to
the vod directory with a pre determined file name, this way I can
then built a link in advanve to allow watchers to view again
immediately.
3)Difficult unless you mess with server side scripts etc.
WebCamMax though will provide this solution.
4) Not sure about that one...................

Error in Broadcasting

Dear Gurus,
We are facing an error in one of the 15 settings created for a Query while all others are working fine only this one is giving a problem while execution.
It gave the following error while broadcasting :
The following error text was processed in the system P24 : Invalid partial field access: Length 0
The error occurred on the application server otc160_P24_11 and in the work process 1 .
The termination type was: RABAX_STATE
And the following error came up in ST22 :
Short text
Invalid partial field access: Length 0
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', wa
caught in
procedure "PRECALCULATE_1" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "CL_RSR_PREC_SERVER============CP", the system
attempted to access the field
"L_S_WBSTORE-CLUSTD" using the length 0.
However, a partial field access with the length specification 0 is not
allowed.
If anybody is aware of the problem and has faced a resolution of the same could you please let me know about the resolution.
Our system has been upgraded to EHP1 Pack 4 and since the same thing is working for other settings it doesnt seem to be a problem with System Pack.
Regards,
Den

Hi Yi,
There was an issue with Master data not maintained for the setting. Hence this was an issue.
Could you please check all the Mater Data and check.
Regards,
Manu

Broadcast Worbook - RABAX_STATE error

Hi everybody,
I'm on SAP BW 7.2. I'm trying to broadcast a worbook. I want to broadcast it with differents variables values, contained in a extern query.
When I execute it, I've got a RABAX_STATE interuption. With the ST22 transaction, I've got some keys words for my searches :
UNCAUGHT_EXCEPTION CX_RSR_X_MESSAGE
SAPLRRMS or LRRMSU13
RRMS_X_MESSAGE
But I didn't find anythings in relation with my problem...
Anyone has a idea for me?
Thanks for your help

I've looked at the note 743263, but it refered to problem of authorization users in the BEx Broadcaster.
I can connect me to the Bex Broadcaster, I can save my broadcast order, but I can't execute it...

Error in if statement

i am writing a stored procedure in which i have made use of if statement my requirement is that in the if statement if a
certain record exists then go inside the if condition otherwise else condition i am getting error
my SQL Statement is this
create or replace
PROCEDURE usp_addAppointment_Mst
parameter list
AS
pAppdetailsid number(10,0);
v_Appcode varchar(10);
begin
     if exists(Select * from dr_slots Where SlotId = pSlotId and MaximumPatient = AllocatedPatient )then
Select v_AppDetailsId from dual;
     return ; -- this is my return statement
else
Select NVL(max(AppId),0) + 1 into v_Appid From Appointment_Mst;
v_Appcode := 'APP' || cast(*v_Appid* as varchar(5)); -error in this line
/*some code*/
     Select AppDetailsId from Appointment_Dtls where AppDetailsId=pAppdetailsid;
end if;
end;
what i am doing is that if statement mentioned above becomes TRUE then execute select statement and return
from there otherwise it goes inside else statement and perform some operation which is there inside the transaction
and then select some value which actually the last statement in else block this is my actual requirement
while executing i am getting this error
Error(71,58): PLS-00103: Encountered the symbol "(" when expecting one of the following:     . ) @ %
Edited by: user21354 on Feb 21, 2011 1:05 AM
Edited by: user21354 on Feb 21, 2011 1:08 AM

What is this line doing in there?
variable declaration That's not valid PL/SQL code.
Please also consider posting your code using {noformat}{noformat} tags as desribed in the SQL and PL/SQL FAQ: SQL and PL/SQL FAQ

Error coming up states " warning some of the videos in your iTunes library including video "Dora" were copied to the iPad "ellen's iPad " because they cannot be played on this

I purchased tv shows for my son over 4th of July weekend from iTunes on my iPad...he has been watching with no problem...yesterday I backed up my iPad and the videos were taken off while I was syncing it. Error coming up states " warning some of the videos in your iTunes library including video "Dora" were not copied to the iPad "ellen's iPad " because they cannot be played on this iPad was not copied because the video format is not supported by the iPad.....makes no sense since he watched the video on Friday on my iPad...I went into the properties of the video and under the summary tab states kind of video is mpeg-4video file...went into the folder on my pc and the file is listed as a m4v file...under the tab tv shows when my iPad is connected I have it checked to sync tv shows and to automatically include "all" episodes of "all shows" ....
I am using version 4.3.4 on my iPad and iTunes version 10.4 ...I even restored back to the original settings and still did not work....called apple twice yesterday and spoke to 2 different people and no one could help me.....I am able to load a movie from my pc to my iPad with no problem and the movie is a mpeg-4video file....totally clueless...

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

SAP BW 3.5 "Error in SQL Statement: DBIF_RSQL_INVALID_RSQL" in Infospoke

Hi ,
I am working on SAP BW 3.5.
while downloading the records through infospoke and giving them to the Application server side, I am getting an error "Error in SQL Statement: DBIF_RSQL_INVALID_RSQL".
Daily the Infospoke runs on delta mode. But for downloading of few records i have deactivated the delta and changed it in to Full mode. After downloading the data I again Activated the delta.but while Executing on Background mode I am getting an error mentioned above.
can anyone please suggest a solution for resolving this error?
Thanks in advance.
Santosh.

Hi:
Did you do some recent change in the objects?. I face sometimes this error and it is due to misalignment among the objects in a data flow (cubes, DSOs, transformations, DTPs, etc.).
What you can do is activate everything again.
Best regards.

Error in SQL Statement (ODS data loading Error)

Hello Gurus...
I am trying to loading the data Info Source To ODS in my ODS Key Figure Z_IVQUA (Invoice Quantity)
is getting the Error Message Data shows 0 from 0 Records.
I was Remove the Key Field from ODS Then try to load the data but i am getting same Error..
Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/Z_INVQUA
Errors in source system
Please Suggest....
Thanks
Prakash

Hello All...
Really appreciate if you can give me some advise. Thanks.
Prakash
Edited by: Prakash M on Jan 14, 2009 2:14 PM

SQL*Loader-930: Error parsing insert statement for column

we upload data on daily basis in application throug apps user and these table are invloved
1. DEV_RA_INTERFACE_LINES_ALL(owner is a apps)
2.RA_INTERFACE_LINES_ALL(owner is a AR)
we do steps
1 delete record from DEV_RA_INTERFACE_LINES_ALL table
2 delete record from RA_INTERFACE_LINES_ALL table
3 load data using sql loader with apps user
4 insert in RA_INTERFACE_LINES_ALL table
we want to change user i mean these step do dataupload user not apps
we give the proper rights to dataupload like select,delete and insert rights on these table to dataupload user but when i going to load data throug sql loader we receive error
SQL*Loader-930: Error parsing insert statement for column APPS.DEV_RA_INTERFACE_
LINES_ALL.ORIG_SYSTEM_BILL_ADDRESS_ID.
ORA-00904: "F_ORIG_SYSTEM_BILL_ADDR_REF": invalid identifier
and if i insert data through apps then done.

make sure that u have no speces left
between lines.
give the path of control file path correctly.

Can u rectify the error in merge statement in sql

hi to all,
i had created a duplicate table of emp with the name of copy_emp with no records.
by using merge statement i want to update the existing rows and insert new rows into copy_emp table as follows ......
merge into copy_emp c
using emp e
on(c.empno=e.empno) --------> here the error is ........ invalid column name
when matched then
update set c.empno=e.empno,.....
when not matched then
insert values(e.empno,e.job,e.sal........);

merge into copy_emp c
using emp e
on(c.empno=e.empno) --------> here the error is ........ invalid column name
when matched then
update set c.ename=e.ename,.....
when not matched then
insert values(e.empno,e.job,e.sal........);
take off empno from update clause.

SQL*Loader-929: Error parsing insert statement for table

Hi,
I get the following error with SQL*Loader:
Table MYTABLE loaded from every logical record.
Insert option in effect for this table: INSERT
Column Name Position Len Term Encl Datatype
IDE FIRST * ; CHARACTER
SQL string for column : "mysequence.NEXTVAL"
CSI_NBR 1:10 10 ; CHARACTER
POLICY_NBR 11:22 12 ; CHARACTER
CURRENCY_COD 23:25 3 ; CHARACTER
POLICY_STAT 26:27 2 ; CHARACTER
PRODUCT_COD 28:35 8 ; CHARACTER
END_DAT 44:53 10 ; CHARACTER
FISCAL_COD 83:83 1 ; CHARACTER
TOT_VAL 92:112 21 ; CHARACTER
SQL*Loader-929: Error parsing insert statement for table MYTABLE.
ORA-01031: insufficient privileges
I am positive that I can SELECT the sequence and INSERT into the table with the user invoking sql*loader.
Where does that "ORA-01031" come from?
Regards
...

Options:
1) you are wrong about privileges OR
2) you have the privilege only when you connect via SQL*Plus (or whichever other tool you used to test the insert).
Is it possible that during your test you enabled the role which granted you the INSERT privilege - and that SQL*Loader doesn't do this?
Can you see the table in this list?
select *
from user_tab_privs_recd
where table_name='MY_TABLE'
and owner='table owner whoever';
select *
from user_role_privs;Any roles where DEFAULT_ROLE is not YES?
HTH
Regards Nigel

ITunes wont open Error -200

yep
well there i was opening iTunes
and BLAMMO !
ITunes wont open
error -200
what am i doing wrong now
also coincedently my sound output aint working

Also, I have not moved any files since updating. Still won't do anything.

Javac(1.4.2) gives error in import statement

Hi All,
I am facing a surprising problem. I have 2 java class files. I write the import statement for second one in the first one. There is no package & these are in the same directory. I have compiled the second one. But when I try to compile the First one. Javac throws error at import statement like below :
D:\Clubs\oct\6>javac -d . ManojTest.java
ManojTest.java:1: '.' expected
import SessionBean;
^
1 error
My Java Files are as below :
import SessionBean;
public class ManojTest
public static void main(String args[])
//ManojTest.java
public class SessionBean
public static void main(String args[])
//SessionBean.java
I have compiled SessionBean.java successfully but when I try to compile ManojTest.java I get error mentioned above.
However this probelm comes when I use j2se 1.4.2.. but works in j2se 1.3.1..
Another way could be I use package structure.
But I can't do any of these, as I have to port my big project to j2se1.4.2.. from j2se1.3.1.. (Live project is running on Tomcat).
Problems is similar in Unix & Windows both.
Is this javac compiler issue or there is some setting which I can make.
I have already included . (dot) in PATH & CLASSPATH environment varibales.
Please help me out if there is any way around this, as i am stuck up in between
thank you
Manoj :confused:

Use a package and then add that package in your classpathOr don't use a package, leave the file in the default (noname) package, and don't use the import statement. Java will find it in the default package without the import.
Explicit import statements from the default package are no longer allowed

QT Broadcaster wont record error 9408 broadcast state change

Similar Messages

Maybe you are looking for