Qt-enhanced conflicts
I am trying to do a system upgrade, but as I have kdemod rather than kde, i use qt-enhanced. Pacman tries to install qt but complains that qt-enhanced is there. I cant seem to work out what is should do so that i can upgrade. Here is the output from pacman:
[root@wensleydale ~]# pacman -Syu
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
kdemod is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: qt conflicts with qt-enhanced. Remove qt-enhanced? [Y/n] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: qt: conflicts with qt-enhanced
I am rather new to arch linux, so any help would be appreciated.
I am still getting issues, I upgraded pacman today....
[tyler@hell ~]$ sudo pacman -Sudf
:: Starting full system upgrade...
looking for inter-conflicts...
:: qt-enhanced conflicts with qt3. Remove qt3? [Y/n] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: qt-enhanced: conflicts with qt3
[tyler@hell ~]$
Shouldent using the "d" & "f" options allow me to bypass this (no dependancy checks and force install?) or does the "u" option (sysupgrade) conflict with the "d" & "f" options?
Thanks.
Similar Messages
-
Qt3-enhanced conflicts with qt3 though I have no qt3
Hi,
I'm trying to install KDEMod, after a clean installation of Arch.
# pacman -S kdemod-base
:: group kdemod-base:
kdemod-arts kdemod-gnu-gift kdemod-kde-common kdemod-kdebase
kdemod-kdelibs kdemod-perl-xml-xql kdemod-ui-kde qt3-enhanced
:: Install whole content? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: qt3-enhanced: conflicts with qt3
But i searched my system, there is no qt3 or kde related stuff installed:
# pacman -Q | grep qt
# pacman -Q | grep kde
both return nothing.
How do I solve this?
Thank you
PS: I previously install opera-static. But nothing changes after i removed it.
Last edited by Mr_Shameless (2008-06-01 02:11:56)Thank you very much though i didnt have the chance to try that. I tried a fresh install of the new 2008.03 release and didnt have that problem
-
I did an Archive and Install. Reboot went fine, logged in. The dock appeared, but top menu was slow to show. Then the finder went into beach ball mode.
I read about the Application Enhancer conflict so I booted up on my backup drive and uninstalled all my Haxies and APE related files. Then repaired permissions and zapped PRAM just for the heck of it. That helped a little...at least apps would open up for a short time, but the finder is still in beach ball mode.
At no time does my HD show up in the finder.
Anyone experience this and have a fix?guys... i stumbled across this post http://discussions.apple.com/thread.jspa?messageID=5650727�
it worked for me, hopefully it'll work for you guys. -
Itunes slow and sputtering -- frequent issue with many
well so much for an update. after updating to latest itunes, 7.0.2.16, my songs and movies skip and run slow.
i have tried all the fixes: new sound card driver, delete quicktime and reinstall, sound enhancer conflict, no plug ins, hardware excelleration...
i cannot listen to my music, and its all locked in the skin of the apple. dang.
help me apple, please help me, and the others - or how about admitting there is a problem so i can quit tweeking the @#$% out of my computer.
PS: i do not have a pavillion laptop or a dell desktop, like so many with this problem seem to have.
respectfully.
amd - fast-2005 Windows XP Pro 1 gb ramYou can try one more thing. It's a bit of a hack, but it's worked for many, many people.
Find and install Foobar 2000.
Then find and install the "multi-plugin for iTunes" and install it.
Open up Foobar and set it to use KERNAL streaming. Close Foobar. and give it a go.
That's the only other suggestion I can think of that you haven't already tried.
iTunes skin with Foobar sound engine = good to go.
iTunes for windows needs a major overhaul. It's laggy, too limited in the codecs that can be used, and has no kernal streaming. (sigh)
They really need to do something fast. -
Windows 8 64bit - VPN 5.0.07.0440 - Disables all internet after installation
I am able to successfully install this version in Windows 8 and use it with the 442 error registry re-name workaround. Once I restart my computer, my internet access will no longer work. The adapter and settings aren't listed in ipconfig. I have a broadcom netlink integrated adapter. I was able to install this exact same version on my Windows 7 64bit laptop without issues. I don't know if there's a Windows 8 issue or a conflict with the network adapter. Please help!
Thanks in advance...I have troubleshooted the issue further and discovered that if I disable "Deterministc Network Enhancer" and then re-enable it everything works. Is Cisco's Deterministic Network Enhancer conflicting with my Broadcom integrated network card? I upgraded to the latest version of the broadcom drivers and that didn't help.
-
ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0
I am installing ERP 6 Enhancement Pack 2 in IDES server which ERP 6.0 with add-on AFS 6.0 installed. I ecountered below error on ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0 :
Conflicts Between Add-On P3A V600 and other components
Component
Release
Add-On Piece List
Information on
Conflict Resolution
SAP_APPL
602
SAPK-602DDINSAPAPPL
Unresolvable
SAPK-602DFINSAPAPPL
Unresolvable
SAPK-602DOINSAPAPPL
Unresolvable
SAPK-602DRINSAPAPPL
Unresolvable
SAPK-602DWINSAPAPPL
Unresolvable
SAPK-602DZINSAPAPPL
Unresolvable
Pls advise.
Thanks.
EdwardHi Edward,
in the Master Guides on http://service.sap.com/erp-inst, we recommend that you check the Add-On compatibity prior to installing the enhancement package. For Add-Ons you might need for instance separate "Conflict Resolutions", and should make sure that these are available. You contact the owner of this Add-On to find out more.
If this topic is solved for an Add-On, but the issue still persists, it might be a support topic.
(An Add-On in this sense is anything which you install in addition to the Standard SAP ERP. As the enhancement packages alter SAP ERP, the add-on might need to react. For SAP Add-Ons, this is done with conflict resolution transports)
regards,
Andreas R -
Conflict bet. Limiter, Enhancements
Hi
I've been looking for an answer to the Limiter filter not working as I thought it should, not like it does with SoundTrack Pro.
Just applying the limiter filter seems to dampen the audio, including quiet audio, and even before making changes. Very odd.
But in this discussion I'm curious for insight into whether there is a conflict between the Limiter filter and the Audio Enhancements (particularly the Equalization options like Voice Enhance, and on the Audio Analysis page, the Loudness option.
Do they conflict in any way?
Is there an order one should work with the 3? Ex.: 1st—Limiter, 2nd—Equalization options like Voice Enhance and 3rd—Loudness. Or is another order correct.
best
elmerWhat I ultimately want to do is somehow default reader x to open pdf files online, then save them and open with acrobat 8 to edit.
I have made progress on this issue. but first a little background. The company im serving uses leedonline.com, the system reqs of the site are adobe 9 or above. What was previously done in the past was to use a virtual pc to download the pdf, then use their acrobat 8 program to edit on their actual computer. The issue is that they have acrobat 8 and do not want to upgrade. In terms of getting reader x and acrobat 8 to coexist I have made a little progress
i have changed the following registry values to "C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe":
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Software\Adobe\Acrobat\Exe
HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
I believe that I have missed a few registry values because i am getting the error "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (1014:1014)." Which in my mind is progress because previously it would default to acrobat.
What to you guys think?
Zach -
Enhance extract structure conflicts with EXIT_SAPLRSAP_001
Hello All,
We have many BW projects going on at the same time. One area we keep bumping into each other is when we need to enhance an extract structure for a datasource.
What we run into is we have to modify it for one extractor and then for another (let's say both are in the LO Cockpit). How do you handle this?
Problem is one project may be ready to move the enhancement and the other not ready.
This is for transaction data so EXIT_SAPLRSAP_001 is being used. Should we create multiple include programs to avoid this?
Thanks!I got the question .
Yes if parallaly many deveopers working on the same task thats modifying the extraxt structure for data source then two ways are there
A) Select the time frame whose development is moving to quaality first as definately there will
be the time frame when the development is moving to quality and all .
So if some one is working on it comment ht ecode andmove to quality .
Once your transport order realesed the other can uncomment there code and in the next transport
there code is also transported with your code .
B) Second is the creation of mulitple includes as there will be no transport order blockage in that .
I suggest the first in the better optiona as no need to increase the number of INCLUDE as one is already provided by SAP is work fine .
Assign marks is the best way to appreciate help whoever it is -
IRQ Conflicts and some other issues
I have a K7N2 Delta-L mobo with an XP2400+ and an MSI FX5600-VTDR128, the reason for this question is that I have some problems, the first of them is at the system information page of XP:
=================================================
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce FX 5600
IRQ 20 Standard OpenHCD USB Host Controller
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 22 Standard OpenHCD USB Host Controller
IRQ 22 NVIDIA nForce MCP Networking Controller
Memory Address 0xD0000000-0xDFFFFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF NVIDIA GeForce FX 5600
Memory Address 0xE4000000-0xE5FFFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE4000000-0xE5FFFFFF NVIDIA GeForce FX 5600
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF NVIDIA GeForce FX 5600
I/O Port 0x000003B0-0x000003BB NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB NVIDIA GeForce FX 5600
I/O Port 0x0000C000-0x0000CFFF PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3
=================================================
Looking at this it looks pretty bad if you ask me :(
But when I look at device manager I see no conflicts and every device that's listed here does not have any conflicts reported, anyway here are my IRQ (according to System Information)
===========================================
IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 5 NVIDIA nForce PCI System Management OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 17 Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3 OK
IRQ 19 NVIDIA GeForce FX 5600 OK
IRQ 20 Standard OpenHCD USB Host Controller OK
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 21 Standard Enhanced PCI to USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
IRQ 22 NVIDIA nForce MCP Networking Controller OK
===========================================
So, my first question is obvious, what's wrong with my system?, am I missing some BIOS setting?, I believe APIC may have something to do, but this isn't the case because it is enabled (at least it says so in BIOS). I have the latest BIOS for this mobo (5.40)
The second issue is something strange that Sisoft Sandra keep telling me: "SMBIOS/DMI information may be inaccurate", an here's what the help says:
=================================
Notice N224 - SMBIOS/DMI information may be inaccurate. This information is reported verbatim and cannot be checked by Sandra. While brand-name companies set this information most generic manufacturers use generic data that is meaningless. This issue generates more technical support queries than all other issues combined.
Fix: If the information is not correct, check for a BIOS update (clear DMI pool) or fix any errors using the DMICFG tool provided with the board. Alternatively, disable Sandra’s DMI/SMBIOS reporting from module Options.
=================================
Is this "normal"???
Anyway, I hope any of you to be able to help me.
Thanks in advice,
FernandoAlthough I am unsure as to what is exactly your problem, but from what I see everything seems ok
Regarding the Sisoft Sandra remarks, don't worry about it.
Regarding the Computer in Device Manager
Try changing it to
Advanced Configuration and Power Interface (ACPI) PC
This has not given me any problems at all.
Here is my system example
IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 5 Standard OpenHCD USB Host Controller OK
IRQ 5 NVIDIA NForce MCP2 IDE Controller OK
IRQ 5 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 5 NVIDIA GeForce FX 5900 Ultra OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 10 Standard OpenHCD USB Host Controller OK
IRQ 10 NVIDIA nForce MCP Networking Controller OK
IRQ 10 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital) OK
IRQ 11 NVIDIA nForce PCI System Management OK
IRQ 11 Standard Enhanced PCI to USB Host Controller OK
IRQ 11 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 11 WinXP Promise FastTrak 376 (tm) Controller OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 13 Numeric data processor OK -
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
#slideshow {
padding: 10px;
margin:0;
#slideshow-caption{
padding:0;
margin:0;
#slideshow img, #slideshow div {
padding: 10px;
background-color: #EEE;
margin: 0;
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #004B8D;
margin: 0;
padding: 0;
color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
/* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
position:relative;
left:-90px;
width:950px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
z-index:1000;
.slide{
position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
width: 960px;
min-height:900px;
padding:5px 0px 0px 0px;
background: #E8F8FF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #E8F8FF;
padding:10px 5px 0px 5px;
.sidebar1 {
float: left;
width: 225px;
margin: 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
z-index:-1;
.sidebar2 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:2;
.sidebar3 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:3;
.content {
padding: 0px 0px 0px 0px;
width: 780px;
float: left;
background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 50px; /* this creates the space between the navigation on the content below */
font: Arial Black, Verdana, , Helvetica, sans-serif;
font-size:1.3em;
font-weight:bold;
z-index:2;
ul.nav li {
border-bottom: 0px solid #FFFF66; /* this creates the button separation */
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 3px 0px 5px 0px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
color: #FFFF0D;
background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #595FFF;
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
padding: 10px 0;
background: #595FFF;
color: #FFFF0D;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header"><!-- end .header -->
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
<ul class="nav">
<li><a href="about.html">About Us</a></li>
<li><a href="history.html">Reardan History</a></li>
<li><a href="activities.html">Activities</a></li>
<li><a href="business.html">Business<br />
Directory</a></li>
<li><a href="about.html">Join the<br />
Chamber</a></li>
<li><a href="links.html">Links<br />
<span style="font-size: 85%">Tourism</span><br />
</a></li>
</ul>
<!-- end .sidebar1 --></div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
after: slideshowOnCycleAfter, //the function that is triggered after each transition
autostop: false, // true to end slideshow after X transitions (where X == slide count)
fx: 'blindX',// name of transition effect
pause: false, // true to enable pause on hover
randomizeEffects: true, // valid when multiple effects are used; true to make the effect sequence random
speed: 100, // speed of the transition (any valid fx speed value)
sync: true, // true if in/out transitions should occur simultaneously
timeout: 5000, // milliseconds between slide transitions (0 to disable auto advance)
fit: true,
height: '300px',
width: '525px' // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
if (slideshowAddCaption==true){
$('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
<!--All elements inside this will become slides-->
<img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
<div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
<img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>
<!--It is safe to delete this if captions are disabled-->
<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
<br />
<br />
<br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center"> <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
<br />
<br />
<br />
<br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
<p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
<span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
</p>
<!-- end .footer -->
</div></body>
</html>If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
float: left;
width: 225px;
margin: 60px 0px 60px 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px; -
Different ways to Datasource Enhancement
I know DS enhancement can be done through ABAP Statement CASE,ENDCASE,WHEN. I came to know that this is old technique to enhance the datasource as it makes the code quite messy if several developers work on the same code.
I came across one document on SDN where we create a new program for each datasource which is independent from other enhancement.
I just want to know how this program works and the difference between this technique and old technique as i have limited ABAP knowledge.
What are the exact challenges that we come across when we use CASE,ENDCASE,WHEN statements.
Edited by: Murali K on Jun 1, 2010 6:31 AMHi Murli,
1) Datasource enhancement previously was done using CMOD Still many organizatins continue with this approach.
Here you can get option to write code for your appended field in ur Standard datsource where you can write select statements etc.
2) Now SAP is recommending to Write Codes using BADI .this approach helps to maintain individual implementations for each data source enhancement
This methods advantage over previous CMOD method is that ,in CMOD a single include will contain all the ABAP coding (this will create problem in marinating the versions for developers).specially while you are transporting the CMOD code to test and prod systems.
With the new BADI method you can avoid this problem as individual implementations can be transported independently without creating conflicts.
Thanks and Regards
Arun -
Enhancement spot in ECC 6.0
Hi all,
can anyone please make it clear on what enhancement spot is in ECC 6.0.
All Useful answers will be rewarded..
Thanks & Regards,
Saroja.Hi
ENHANCEMENT-POINT
ENHANCEMENT-POINT can either be static (for example, additional data declaration) or dynamic (for example, additional coding).
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/ee9441026aae5fe10000000a1550b0/content.htm
Refer the very useful links below:
Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Please check this blogs and wiki as well.
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
Please check these weblog for more information and sample codes.
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Look at this articles:
New Enhancement Framework
Enhancement Framework
Enhancement Framework - The New Way to Enhance Your ABAP Systems
Switch Framework Demo
Introduction to the Enhancement Framework
To now more about BADi Implementation see:
How To Define a New BAdI Within the Enhancement Framework
How to implement a BAdI And How to Use a Filter
Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Please check this blogs .
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
Enhancement frame work is the new concept using which SAP allows you to change the existing programs
See the following blogs that talk about the same in detail
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Defines a position in an ABAP program as an enhancement option, at which one or more source code plug-ins can be inserted.
Syntax
ENHANCEMENT-POINT enh_id SPOTS spot1 spot2 ...
[STATIC]
[INCLUDE BOUND].
Extras:
1. ... STATIC
2. ... INCLUDE BOUND
Effect
: This statement defines an explicit enhancement option at the current position in the program at which a source code enhancement can be made. In program generation, the source code plug-ins of the assigned enhancement implementation that are available in the current system and have a switch in the status stand-by or on, are inserted at this position.
If the addition STATIC is not specified, the source code enhancement is dynamic. This means that in program execution, only those source code plug-ins are executed whose switch has the status on. If a source code plug-in does not have a switch assigned to it, it is handled in the same way as a plug-in with a switch in the status on.
With enh_id, an ID must be specified directly for the enhancement option, which is unique in the current compilation unit without the addition INCLUDE BOUND, and with this addition, is unique in current Include program. At least one enhancement spot must be assigned to the enhancement option using the specification simple enhancement spots spot1, spot2, and so on.
Within enhancements, one or more source code plug-ins can be created for one enhancement option. A source code plug-in is created by the assignment of an enhancement implementation in the Enhancement Builder. This automatically generates an empty source code plug-in with a unique ID, which is displayed underneath ENHANCEMENT-POINT in the Editor, where the actual enhancement can be implemented between ENHANCEMENT and ENDENHANCEMENT.
A source code plug-in is assigned to only one enhancement option. Multiple source code plug-ins of one enhancement implementation and the source code plug-ins of multiple enhancement implementations can be assigned to one enhancement point.
Notes
: In the terminology of the enhancement concept, the statement ENHANCEMENT-POINT includes both the enhancement spot element definition and the enhancement spot invocation of the enhancement option.
The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit ? Enhancement operations ? Create enhancement in the Enhancement Builder. After the program has been saved or created using Edit ? Enhancement operations ? Create enhancement, the statement can only be deleted by choosing Edit ? Enhancement operations ? Delete enhancement.
In addition to the enhancement options explicitly specified by ENHANCEMENT-POINT, ABAP programs also contain implicit enhancement points, which can also be enhanced using source code plug-ins.
Addition 1
... STATIC
Effect
: The addition STATIC is used to define a static source code enhancement. In a static source code enhancement, all incorporated source code plug-ins are taken into account when the program is executed, including those whose switch is in the status stand-by.
Note
: The STATIC addition is intended for the enhancement of data declarations, while the statement ENHANCEMENT-POINT without the STATIC addition is designed for the enhancement of executable coding. When the statement is executed using Enhancements ? Create enhancement, the addition is set according to this selection.
Addition 2
... INCLUDE BOUND
Effect
: This addition can be entered in Include programs. It links the source code enhancement to the current Include program. Each program that incorporates an Include program only includes the source code enhancements that are defined with this addition. Source code enhancements created using the INCLUDE BOUND addition have their own namespace in each Include program. This ensures that if several Include programs are integrated into one compilation unit, no namespace conflicts arise, either between Include programs, or with the source code enhancements of the compilation unit.
Without the addition INCLUDE BOUND, a source code enhancement is assigned to only one compilation unit. If the statement ENHANCEMENT-POINT is executed in an Include program without this addition, a compilation unit must be assigned to it in the Enhancement Builder.
Note
: In an Include program, Include-bound and non-Include-bound source code enhancements can not be defined at the same time. This also applies if an Include program incorporates other Include programs.
Enhancement points are points provided by sap in standard programs to modify the source code. Go to any standard program, Locate the spiral button on the toolbar. Then press it and then navigate to edit->enhancement operations->display enhancement point menu. Then a no of yellow lines would appear, which are the available en points. You would have to change it and write the applicable source code.
Regards
Anji -
Enhancement Req (v4.0): Report Query- Output Format- Derive from Item
Brief Introduction
I have 1 major request I would like to make (and 2 lesser ones). The first, I would like to specify custom available output formats for 'Report Query' objects, as well as Reports Regions, Interactive Reports, etc. I believe that this could easily be an instance setting in the Report Server region of the internal workspace, or per workspace / application. Even if not supported on the system wide level, I would recommend that the "Derived from Item" output format "Return Value" be allowed to be returned unaltered to the Report Server. I know that the type is returned as "_xf", and for my purposes I would REALLY like to be able to get something other than the defaults.
Use Case
I am creating a custom JasperReports integration (for which I will be launching a public SaaS beta extremely soon). It uses the standard Apex reporting objects (Queries, Layouts, Print Buttons, etc). JasperReports templates are uploaded as Report Layouts and everything works fine. I am, however, wanting to implement as many output formats as are available to me in Jasper...that means Word 07, Excel 07, ODS, ODT, etc. For the items that take a print server override I can handle this in other ways (even though this appears broken [see below]), but for the standard report queries this isn't available. I would basically like the option to define the set of available output formats for the report server, and what the "_xf" returned for each one is.
Minor Requests
- Replace Uploaded Templates: If a template is used often and updated, then it has to be changed everywhere...minor irritation.
- Customize Report Server URL for the Workspace or Application: For SaaS instances, workspace developers may license or have access to reporting solutions that are not (and should not be) available to all of the Oracle instance's workspaces, or may conflict with a service that is already provided by the instance administrators.
Broken
When I use the print server override, with the "Use Headers From" option, it appears that neither my content type, nor my content disposition headers are being sent back to the client. This is the work around solution for the non-standard types issue I am requesting enhancement on, so I would like to know what I can do to get this working immediately.
Additional Info
As it stands, if the site is available, feel free to sign up for the beta. The beta keys will be exported soon to the instance and made available. Instructions on setup will also follow:
https://apex.vendelinc.com/apex/f?p=homeHi, please did you get any solution to this issue? I am having similar challenge right now.
select EMP.DEPTNO as DEPTNO,
DEPT.DNAME as DNAME,
EMP.EMPNO as EMPNO,
EMP.ENAME as ENAME,
EMP.JOB as JOB,
EMP.MGR as MGR,
EMP.HIREDATE as HIREDATE,
EMP.SAL as SAL
from SCOTT.DEPT DEPT,
SCOTT.EMP EMP
where EMP.DEPTNO=DEPT.DEPTNO
and DEPT.DNAME =upper(:dname)
This run perfectly in sql developer, toad, and even inside publisher if I login directly to publisher to create report.
Generating this same query in shared component query builder and testing it returns no data found. If I remove the last line, it works. but with the last line, it return no data found. It seems no one has been able to provide solution to this issue -
New to Enhancements and Modifications in SAP ABAP
Hi experts,
Could anyone has a tutorials or ebooks on this topic? I need to learn more about this.. tnx in advance!!!Hi
Enhancements and User Exits
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
ENHANCEMENT-POINT
ENHANCEMENT-POINT can either be static (for example, additional data declaration) or dynamic (for example, additional coding).
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/ee9441026aae5fe10000000a1550b0/content.htm
Refer the very useful links below:
Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Please check this blogs and wiki as well.
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
Please check these weblog for more information and sample codes.
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Look at this articles:
New Enhancement Framework
Enhancement Framework
Enhancement Framework - The New Way to Enhance Your ABAP Systems
Switch Framework Demo
Introduction to the Enhancement Framework
To now more about BADi Implementation see:
How To Define a New BAdI Within the Enhancement Framework
How to implement a BAdI And How to Use a Filter
Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Please check this blogs .
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
Enhancement frame work is the new concept using which SAP allows you to change the existing programs
See the following blogs that talk about the same in detail
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Defines a position in an ABAP program as an enhancement option, at which one or more source code plug-ins can be inserted.
Syntax
ENHANCEMENT-POINT enh_id SPOTS spot1 spot2 ...
[STATIC]
[INCLUDE BOUND].
Extras:
1. ... STATIC
2. ... INCLUDE BOUND
Effect
: This statement defines an explicit enhancement option at the current position in the program at which a source code enhancement can be made. In program generation, the source code plug-ins of the assigned enhancement implementation that are available in the current system and have a switch in the status stand-by or on, are inserted at this position.
If the addition STATIC is not specified, the source code enhancement is dynamic. This means that in program execution, only those source code plug-ins are executed whose switch has the status on. If a source code plug-in does not have a switch assigned to it, it is handled in the same way as a plug-in with a switch in the status on.
With enh_id, an ID must be specified directly for the enhancement option, which is unique in the current compilation unit without the addition INCLUDE BOUND, and with this addition, is unique in current Include program. At least one enhancement spot must be assigned to the enhancement option using the specification simple enhancement spots spot1, spot2, and so on.
Within enhancements, one or more source code plug-ins can be created for one enhancement option. A source code plug-in is created by the assignment of an enhancement implementation in the Enhancement Builder. This automatically generates an empty source code plug-in with a unique ID, which is displayed underneath ENHANCEMENT-POINT in the Editor, where the actual enhancement can be implemented between ENHANCEMENT and ENDENHANCEMENT.
A source code plug-in is assigned to only one enhancement option. Multiple source code plug-ins of one enhancement implementation and the source code plug-ins of multiple enhancement implementations can be assigned to one enhancement point.
Notes
: In the terminology of the enhancement concept, the statement ENHANCEMENT-POINT includes both the enhancement spot element definition and the enhancement spot invocation of the enhancement option.
The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit ? Enhancement operations ? Create enhancement in the Enhancement Builder. After the program has been saved or created using Edit ? Enhancement operations ? Create enhancement, the statement can only be deleted by choosing Edit ? Enhancement operations ? Delete enhancement.
In addition to the enhancement options explicitly specified by ENHANCEMENT-POINT, ABAP programs also contain implicit enhancement points, which can also be enhanced using source code plug-ins.
Addition 1
... STATIC
Effect
: The addition STATIC is used to define a static source code enhancement. In a static source code enhancement, all incorporated source code plug-ins are taken into account when the program is executed, including those whose switch is in the status stand-by.
Note
: The STATIC addition is intended for the enhancement of data declarations, while the statement ENHANCEMENT-POINT without the STATIC addition is designed for the enhancement of executable coding. When the statement is executed using Enhancements ? Create enhancement, the addition is set according to this selection.
Addition 2
... INCLUDE BOUND
Effect
: This addition can be entered in Include programs. It links the source code enhancement to the current Include program. Each program that incorporates an Include program only includes the source code enhancements that are defined with this addition. Source code enhancements created using the INCLUDE BOUND addition have their own namespace in each Include program. This ensures that if several Include programs are integrated into one compilation unit, no namespace conflicts arise, either between Include programs, or with the source code enhancements of the compilation unit.
Without the addition INCLUDE BOUND, a source code enhancement is assigned to only one compilation unit. If the statement ENHANCEMENT-POINT is executed in an Include program without this addition, a compilation unit must be assigned to it in the Enhancement Builder.
Note
: In an Include program, Include-bound and non-Include-bound source code enhancements can not be defined at the same time. This also applies if an Include program incorporates other Include programs.
Enhancement points are points provided by sap in standard programs to modify the source code. Go to any standard program, Locate the spiral button on the toolbar. Then press it and then navigate to edit->enhancement operations->display enhancement point menu. Then a no of yellow lines would appear, which are the available en points. You would have to change it and write the applicable source code.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/2342e1f3-0b01-0010-a186-fdd404884050 [original link is broken]
Please try the link given below
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Regards
Anji -
Fix for crash caused by conflict with Joesoft Hear software
Here's information about a fix for the crash in After Effects & Premiere Pro CS5 caused by a conflict with the Joesoft Hear audio enhancer:
http://bit.ly/hyqEZ4After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!
Maybe you are looking for
-
How can I find out this person who has been emailing me every few months. I have one of the emails full header that I retrieved on my iPhone. I omitted my email address for privacy, but mostly it is original. Is this email a scam? I don't know who th
-
Image quality when moving bitmaps around the stage
Hey all, I am moving an image around the stage, and when it moves quickly, it becomes distorted and displays what I can only refer to as "banding". The image appear to be misaligned for some of the frames that it is moving. I have tried a number of t
-
Hi, We are trying to work on a process to track an order history to find lines in the order that caused it to ship late. The basic idea is to pick orders that were shipped late and check their shipping history to find lines in the order that had issu
-
Homework help--almost done but don't know how my class and main work?
hello, i'm doing a project for my intro to java class. i'm almost done but i'm very confused on making my main and class work. the counter for my class slotMachine keeps resetting after 2 increments. also i don't not know how to make my quarters in t
-
Ever since I updated to version XI, I haven't been able to open a pdf file, either from an online location or on my hard drive. Went through the fix option and that didn't work. Tried uninstalling and reinstalling - that didn't work either. Tried