Qty and value update

hi all sapians,
Can any one give me a very clear idea or story behind the check boxes of quantity and value update in OMS2 and for some material there boxes are checked and for some materials boxes are not selected.
Edited by: MANI ROOPA SD/MM on Apr 21, 2008 8:09 AM

hi
Quantity Updating Specifies that the material is managed on a quantity basis in the material master record for the relevant valuation area.
Value Update: Specifies that the material is managed on a value basis in the material master record for the valuation area concerned.
The values are updated in the respective G/L accounts at the same time.
as you said at for some material there boxes are checked and for some materials boxes are not selected
the Qty and Value are updated based on valuation area
Valuation Area
Organizational level at which the material is valuated. A valuation area can be one of the following:
Plant: All plants belonging to a company code, in which case the valuation area is the company code
1: Based on valuation area and as required some material types are selected and some are not
2: Based on material Type we select Qty and Value updation: like for NORM for your valuation area (and also might be for plant valuation) all boxes are selected and for material type KMATConfigurable materials it is not selcted
regards

Similar Messages

Account Assignment - Qty and Value Update

Hi,
I need to have value and qty update for a a/c assignment po's.. ie in po i'm using a/c assignment as A, and in gr i need to have qty and value update . how to do?? is it possible? i knew that that a/c assingment won't generate qty update for a/c assignment catergores... is any way to create qty update for a/c assignmnt cateroires (K-cost center,A-Asset)

Hi,
when you are creating a PO with account assignments menas , the costs of this product need to get posted to the account assignment , and the material is being procured for consumption ( not for stock) to this account assignment.
But however , qty and value updates depends upon the material type of the material.When you use a stocked material type material is used for the PO, change the account assignment definition as said in above posting.
Chek the material type of the material you used for the PO to your error message.
Regards,

Update Qty and Value in Quantity Contract

Hi,
With reference to Quantity Contract when we i create release order the status of quantity Contract should l be changed.
Example
Order Qty in Quantity Contract 100 pc Value 10000
One Release order is created with Order qty 20 Value 2000
Now in the contract where can i see open order qty and open order value.
in VTAA item category KMN -
TAN the setting has been checked for "Update Doc Flow"
Regards
Jyoti

Hi,
Just try this and let me know your expected result.
1. Go to VA42 to VA43.
2. Enter your contract number and press document flow button.
3. See whether the Qty and value is getting displayed or not.
4. If not getting displayed. Do execute the below steps.
5. In document flow screen, select your contract document.
6. In top menu : Documen flow->View-> Items.
7. Now, the systme will display the Qty and value of delivered/not delivered information.
Regards,
Vijay

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

Material type - maintainance by qty and value

Dear All Guru,
Yesterday I had copied the plant from the plant belong to same company and maintained the same val Gr Code.
But i found that I am not able to make GR posting and the error was Plant and material type is not matching and then over SDN i got the soln to maintain qty and value for matl type and it resolved the problem.
but can anybody tell me that why this can happen ?
b'coz still if the val/qty ticks are not maintained why system is showing the material type and plant combination error...though it can consider this as UNBW material and can still post the GR
also can you suggest the right method for coping the plant so i won't face problem like this or any check methods after coping new plant
Regards,
Vimlesh

Hi,
For Preparation of New Plant, following steps to be adopted.
1. Excute the India Specific Localize Sample Organizational Units using SPRO> Enterprise Structure> Localize Sample Organizational Units.
In this IMG activity, you localize the sample organizational units by applying the appropriate country template like India to them.
2. Then, in the next IMG activities (under Enterprise Structure Definition and Assignment), you copy these localized organizational units to create units of your own.
Caution:
Only execute this IMG activity if you have not changed any Customizing settings in SAP R/3.
Do not execute this IMG activity in your production client, as it will overwrite the settings for any organizational units named 0001. Run it only in your production preparation client from where you will transport to Prodution Client.
Note: Unless you adopt this procedure to create the new plant, till then you will encounter the same Error which you are facing.so these are the guide line for create of new/Additional country specific Organizational Units.
hope it helps...
manoj singh

Consumption and Production qty and value report

Any one knows t-code for report that can give porduction order wise consumption in qty and value and production order wise production in qty and value.

Use report KOB1, use the standard layouts that get you this information, normally positive quantities are consumptions and negative quantities are production output.
Thanks
Naveen

Quantity and value updation

Hi to all,
Kindly explain , what is the meaning of Quantity and value updation.
1. Quantity updation means where we have to check quantity
2. Value updation means where we have to check value
Thanks
Ravi

hi buddy
this kind of thing will come in picture when u take some order from outside with customer material I.E. u act as subcontractor
at this time the value updation is not required so we can use unvaluated material type UNBW
ok
in ono quantity update can be use in scenario of returnable packaging where u dont want to make any quantity updates and also value updates when u transfer the matrial
ok
reply if any query
reward if useful
regards
kunal

Batch wise stock report with qty and value as on date

is there any report so that we can see the stock qty with value as on date,
i have tried mb5b but it is showing only qty and batch combination not qty value and batch combination
plz suggest me, it is very urgent.
nitin

MBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
There is no table in SAP that holds the stock information on daily basis.
You have to develope this yourself. Easiest method by copying a table like MBEW and MARD daily to a Z-Table.
A stock situation at a certain date can be calculated with MB5B.
Edited by: Jürgen L. on Aug 5, 2008 4:06 PM

Shelf ageing report with qty and value

hi
i want shelf ageing report with stock value and stock quantity together.
or any other way to club together the reports which will having stock qty and stock value

Hi,
    How about TRC:MB5M( Expiration Date List).   But the function is qty only.
   Maybe you have to make add on program.
Regards,
   Gaito

Movement type - accounting posting and value update

Hi,
1) Could some one let me know the exact check box or setting in movement type master data that makes value postings to FI.
I mean when I use a movement type, I do not want any value updates.
2) Also, when a material uses standard price as price control, system also makes an update to MAP price for statistical purposes. I observed this statistical update to MAP price field happens only for movement types 101 and 102. Could some one explain me why it does not happen for other movement types and what I need to do for enabling system to update MAP price for statistical purposes even for other movement types.
Thanks,
SKD

Could some one let me know the exact check box or setting in movement
type master data that makes value postings to FI
The control is in OMJJ. Once you go to OMJJ, key in movement type 101 and execute. There you can see some tabs to your left screen. If you double click on Account Grouping, you can see a tab on the last Check acct.***. Wherever the box is checked, those relevant entries will be posted to FI.
What you can do is copy this standard movement type, rename it and make changes here.
thanks
G. Lakshmipathi

PO qty and Value with Inbound Delivery qty

Dear all
i have a report requirement, client wants to have a report on the basis of Inbound delivery qty. for eg.
If Po qty is 100 @ $10.00 each Total Po value = $1000
if he makes a inbound delivery of 20 qty Report should display outstanding delivery qty as 80 and with reduced value .of $800
Pl tell me how to get these details.
Regards
Manoj

Hi Manoj,
I think you should should copy ME2M and change the output.
Sanjeev

Planned qty. and value for process order (components wise)

Hi Experts,
I need to capture the planned qty. (requirement qty.) and planned value of the components of a process order for some profit report. Please suggest me from which table i can get these values. (In RESB only req. qty. is there.)
Thanks
Nitin kapoor

COSP or MBEW would help get that info. But take help from your FI/Co colleague to understand the table better

Invoice qty and value should not exceed po qty/value

Is there a way where we can make tolerance zero in case of invoicing i.e i want to restrict the variance between PO qty/value and Invoicing qty/value.
Gurus help me...
Regards,
Satyendra

the problem still persists.
When i make message 087 as error and try to post invoice for greater qty (than po), after GR, it allows me giving warning message (081) that Invoice qty is greater than GR qty. Because 087-error message will be effective for POs with out GR.
So can we have a check for POs whose GR is done for PO qty, but doesnt allow me to post invoice greater than PO qty
Regards,
Satyendra

Inventory by qty and value

Hi all,
I need to get a list of materials, whch displays :
<u>Mats which have not moved for a specified period of time (For all mvt types and storage locs)
Qty of above mats
Value of above mats
Last mvt type done</u>
Is there a single tcode for all this?
Thanks!
Sud

Hi,
I am not sure about any specfic tcode which meets your requirements, but the following tcod's deals with inventory :
MMBE,MB52,MB53
regards,
a.fahrudeen

WIP QTY. AND VALUE IN SINGLE REPORT FOR A PARTICULAR PERIOD

Is there any report for a particular period that we can get the WIP qty. and value in single report. If there what the fileds we have to select.
Ex. We want what is the consumption qty. and value and what is the GR qty. and value for the period ending June 08.

Hi,
You can use the T-Code KKAS to get the WIP Qty against a given plant/material combination.
some of the other supporting t-codes are:
KKAO                 WIP Calc.: Collective Processing
KKAQ                 Display WIP - Collective Processing
KKAT                 WIP Display for Product Cost Coll.
KKAV                 WIP Calculation for Cost Object Hier
KKAW                 WIP Display Cost Object Hierarchy
KKAX                 WIP Calculation for Order
KKAY                 WIP Display for Order
Regards,
JLN

Qty and value update

Similar Messages

Maybe you are looking for