Quality Check at customer location

Hi experts,
            I am working for dairy industry and here one scenario is that my client sends processed milk in tankers to other dairies, before that quality check is done, FAT & SNF is measured and according to fat & snf the rates of milk to customer is done, that milk reaches to the customer on that day or second day, then at the customer site again quality of that milk is measured in terms of fat & snf, and it may or may not vary, but if quality is differed then it is noted down and that customer sends that quality on document and then according to the quality found at customer location the billing to the customer is done on this basis, so my client requirement is that he wants the quality check done at customer location should get fetch in POD (T-code LOPOD) so that their manual entry is minimized, whats the solution.
Regards,
Karad D D

Hi,
Activate the Delivery Inspection type 10. Create Quality Info record - customer. In Info Record , make the check for Quality Inspection after Delivery.
With Thos setting material can be delivered for the delivery note without Making Inspection, but lot will generate. Make the Inspection at Customer Site and Do the RR for that Lot.
Reagrds,
Neeraj

Similar Messages

  • Customer returns to quality check storage loc............

    hi,  sap gurus,
    suppose some customer X has returned some 100 goods from 1000 he purchased and then these goods has to be transferred to different storage location because there quality check happens and after 72 hours or so then the tested goods will be transferred to goods for un restricted use and
    how to do this configuration in SAP r/3.
    plz help me onthis.
    regards,
    sd consultant

    If your requirement is something like this :
    Goods coming in - After GR is put - Goods should be posted to Quality Inspection not to Unrestricted Use.
    If its so,
    Goto Material Master
    Goto Quality Management Tab Page
    Activate the "Post to insp. Stock"
    Your requirement should be fulfilled.
    Thanks
    Vaidee
    Edited by: Vaidee on Aug 27, 2008 8:20 AM

  • Order Import - Validation failed for the field - End Customer Location

    I am trying to import an order using standard import program and it is failing with below error:
    - Validation failed for the field - End Customer Location
    I have checked metalink to debug this and found nothing, the values i have used to populate the interface table or valid.
    Can someone please post your views on this, on where the problem might be.
    Thanks!

    Hello,
    Try the following
    1) Check if any processing constraints are applied to customer/location
    2) Try to create a new customer and associate internal location.
    Create a new order to reproduce the issue
    Thanks
    -Arif

  • How to check the Customizing setting in Different SAP CRM System

    Hello Guru's
    I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
    I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
    Thanks in advance
    With Regards
    Sreeram

    hi
    to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
    Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
    this is just a way other may be to see manually all the settings in all the clients
    best regards
    ashish

  • Quality Check before every Delivery

    Dear All,
    I have a requirement as follows:
    This is a Make to Stock scenario where the material is produced, a Quality check is performed and placed in finished goods storage location. After 3-4months of production when a Sales order is due for delivery, the client wants to perform a Quality check before every delivery is dispatched.
    Can you please suggest me how this can be mapped in SAP?

    Hello ,
    please check  this link
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/7b/acae87475331479287bcb94b25072d/frameset.htm
    venkataswamy

  • Time-out checking log bucket location.

    Hi,
    Earlier this month, I successfully ran the OSB Cloud Module for Amazon S3 installer. It created a "new registration for this S3 user" with a new "Registration ID". It also generated an "S3 Logging Bucket" with a name based off of my Amazon nickname which at the time of running the Cloud module installer was "javanetworking".
    $ *./osbws_install.sh*
    Oracle Secure Backup Database Web-Service Install Tool, build 2011-02-04.0001
    AWS credentials are valid.
    Creating new registration for this S3 user.
    Created new log bucket.
    Registration ID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    S3 Logging Bucket: oracle-log-javanetw-1
    Validating log bucket location ...
    Validating license file ...
    Create credential oracle.security.client.connect_string1
    OSB web-services wallet created in directory /u01/app/oracle/product/11.2.0/dbhome_1/dbs/osbws_wallet.
    OSB web-services initialization file /u01/app/oracle/product/11.2.0/dbhome_1/dbs/osbwstestdb1.ora created.
    Downloading OSB Web Services Software Library from file osbws_linux64.zip.
    Downloaded 20744341 bytes in 10 seconds. Transfer rate was 2074434 bytes/second.
    Download complete.
    Extracted file /u01/app/oracle/product/11.2.0/dbhome_1/lib/libosbws12.so
    Since then, I have changed my Amazon nickname (https://www.amazon.com/gp/nickname/index.html"). I was hoping to re-run the Cloud module installer and have it generate a new "S3 Logging Bucket". I removed the two S3 buckets that were created in the initial Cloud module install (the data and log buckets).
    However, when I attempt to re-run the Cloud module installer, it complains that it cannot find the original "S3 Logging Bucket":
    $ *./osbws_install.sh*
    Oracle Secure Backup Database Web-Service Install Tool, build 2011-02-04.0001
    AWS credentials are valid.
    S3 user already registered.
    Registration ID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    S3 Logging Bucket: *oracle-log-javanetw-1*
    Validating log bucket location ...
    Time-out checking log bucket location.
    Please try again later.
    I even tried using the *-newLogBucket* option to osbws_install.jar so it would force the creation of new log bucket; however, it doesn't appear to do anything. It still complains about not finding the original S3 Logging Bucket.
    I thought the best option would be to "un-register" the Amazon S3 user the installer generated. There is no documented option in osbws_install.jar to perform a full "un-install" or "un-register". The Registration ID the installer creates appears to be hard-coded metadata somewhere in Amazon S3.
    +AWS credentials are valid.+
    +S3 user already registered.+
    +Registration ID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx+
    I know that the registration information is not stored with your OTN profile because I tried putting in a fake OTN username/password when calling osbws_install.jar. It doesn't use the OTN username/password because it first uses your AWSID/AWSKey to see if there is information that the S3 user is already registered. Once it determines that the S3 account is already registered, it doesn't need to log in to OTN and displays:
    *S3 user already registered.*
    I did try this and it worked for modifying the backup bucket (OSB_WS_BUCKET) but didn't appear to work for the S3 Logging Blucket (_OSB_WS_LOG_BUCKET).
    1.) Manually re-create the missing S3 Logging Bucket (oracle-log-javanetw-1).
    2.) Run the Cloud module installer so it creates the wallet, configFile, and downloads the library.
    3.) Determine list of valid parameters that can be set in the configFile:
    $ *strings $ORACLE_HOME/lib/libosbws12.so | grep '^OSB_' | sort*
    OSB_WS_BUCKET <----------
    OSB_WS_CHUNK_SIZE
    OSB_WS_HOST
    OSB_WS_LICENSE_ID
    OSB_WS_LICENSE_MAX_SESSIONS
    OSB_WS_LOCATION
    OSB_WS_PFILE
    OSB_WS_PROXY
    OSB_WS_WALLET
    $ *strings $ORACLE_HOME/lib/libosbws12.so | grep '^_OSB_' | sort*
    _OSB_WS_100_CONTINUE
    _OSB_WS_ACCESSLOG
    _OSB_WS_ACCESSLOG_CLEANER
    _OSB_WS_ACCESSLOG_RETENTION_TIME
    _OSB_WS_ALLOCBUF_DISABLE
    _OSB_WS_BASIC_AUTH
    _OSB_WS_BUFFER_READ
    _OSB_WS_BUFFER_WRITE
    _OSB_WS_CHECKER_RETENTION_TIME
    _OSB_WS_CLEANER
    _OSB_WS_CLEANER_RETENTION_TIME
    _OSB_WS_DEFERRED_DELETE
    _OSB_WS_EVENT
    _OSB_WS_IP_REFRESH_TIMEOUT
    _OSB_WS_LOAD_BALANCE
    _OSB_WS_LOG_BUCKET <----------
    _OSB_WS_PURGE_LIMIT
    _OSB_WS_RECV_BUF_SIZE
    _OSB_WS_REDIRECT
    _OSB_WS_RESPONSE_TIMEOUT
    _OSB_WS_RETRY_WAIT_TIME
    _OSB_WS_REUSE_CONNECTION
    _OSB_WS_RUN_CLEANER
    _OSB_WS_SDU_SIZE
    _OSB_WS_SEND_BUF_SIZE
    _OSB_WS_SESSION_RETENTION_TIME
    _OSB_WS_TDU_SIZE
    _OSB_WS_TRACE_LEVEL
    _OSB_WS_UPLOAD_DELAY
    _OSB_WS_USE_IPV6
    _OSB_WS_VALIDATE_CHUNK
    4.) Modify the configFile to include:
    $ *cat $ORACLE_HOME/dbs/osbwstestdb1.ora*
    OSB_WS_HOST=s3.amazonaws.com
    OSB_WS_LICENSE_ID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    OSB_WS_WALLET='location=file:/u01/app/oracle/product/11.2.0/dbhome_1/dbs/osbws_wallet CREDENTIAL_ALIAS=idevjhun_aws'
    OSB_WS_BUCKET=idevelopment-oracle-backups
    _OSB_WS_LOG_BUCKET=idevelopment-oracle-log
    So,
    1.) Is the *-newLogBucket* option broke or an unimplemented method?
    2.) Is there a way to "un-register" or modify the S3 registration information so that the Cloud module installer will register a new S3 user? (i.e. starting from scratch)
    It would seem to me that a user might want to completely uninstall and un-register at some time in the future.
    3.) Where is the "Registered S3 User" metadata stored?
    4.) Can you specify the S3 Logging Bucket (and data bucket) during the install?
    There is a similar post which the user ran into the same issue when removing the S3 Logging Bucket.
    https://forums.oracle.com/forums/thread.jspa?messageID=4581188
    Best regards,
    jeff

    Hi again,
    my problem seems to be caused by us having deleted the bucket at an earlier stage. When we ran the installer script again, the installer was confused by this, and was not able to re-create a bucket.
    Rune

  • Re: ATP check at storage location level.

    Hi All,
    NEED urgent help.
    I want to know if it is posiible to have ATP check at storage location level only.
    I do not want this check to happen at plant level.
    Please reply.
    Thanks and regards,
    Nilesh

    Hi Shankar,
    Storage location is defaulted in sales order.
    Can you tell me if there is any user exit for ATP wherein I can carry out the ATP at storage location level and not at plant level.
    Thanks and regards,
    Nilesh

  • Availability Check at Storage Location Level.

    Hi All,
    Currrently we have the availability check functionality happenin at the plant level. If the stock is available in the plant, then the sales order is getting confirmed. But, the requirement is if the stock is insufficient then system should check all storage locations attached to the plant. Can someone please guide as to how this can be achieved?
    Regards,
    Raghav

    Hi
    This is not a standard SAP functionality. Either you have to input the storage location manually in the sales order or to automate this,  you have to enhance the functionality using a userexit.
    Thanks,
    Ravi

  • Availablity check at storage location level in STO

    Hi,
      There is an unique requirement from my client with respect to the Availability check at storage location level in STO
    Process:
      Based  on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
    During this availability check the stock will be considered at plant level and not at storage location level.
    Requirement/Scenario:
    Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
    Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
    Example
    Total required qty: 1000  of material X
    material X - Stock in Storage location A  : 600
    material X - Stock in Storage location B : 400
    Two separate line item needs to be created in the STO
    Sl no
    Material
    qty
    Issuing storage location
    1
    X
    600
    A
    2
    X
    400
    B
    Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
    Please suggest how to achieve this. If any enhancements needs to be done we will do it.
    Thanks & regards,
    Prashanth

    Hi Nilesh,
    in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
    I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
    I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
    Regards,
    Markus

  • Data quality check or automation

    Apart from passing the report to the user for testing are there ways the process can be automated for a data quality check and how?
    Thanks.

    Hi Dre01,
    According to your description, you want to check the report data quality. Right?
    In Reporting Services, the only way to check the report data is viewing the report. So for your requirement, if you want to make this data processing automatically. We suggest to create subscription, it will process the data automatically based
    on the schedule and you will get the subscription of report to check if it shows data properly.
    Reference:
    Create, Modify, and Delete Standard Subscriptions (Reporting Services in Native Mode)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • ATP Check against customer stock for return Sale order

    Hi Friends,
    Pl.help in this.
    1. Is it possible to configure ATP check against Customer stock in a Sale order/Return order/any other way? ( Actuallly, client wants to take back empty cylinders through return sale order by ATP check against the customer stock)
    Regards,
    Mani

    Hi Mani ,
    Are you  taking cylinder as returable packing item or not?
    ex- For soft  drinks or beverages industry  it pretty common , they  use thel returnable package material type and more over why you want  use return sales order for this?
    Note- Just plz explain  scenario to MM and PP People also as availability check with all combination
    Hope it is helpful to you,
    Regards
    Venkat

  • How can i check the last location of iphone when it was on?

    I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
    the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
    plz plz help me

    it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
    i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

  • Issue check to customer

    Hi Gurus,
    I have a business scenario:
    Customer comes to store and picks up the items and pay the item.  I use F.13 to clear customer open items.
    When customer comes for exchange, customer returns item and pick ups another item i receive return sales order for the full amount and fresh sales order for new item. I have one credit memo and one invoice for that customer. But i get only net payment(either customer paid or we paid to customer) from my front end application to SAP. Customer balance is zero now. Technically Customer has not paid yet. We have policy  we issue check from HQ not from store. I can't use F110 or FCH5 or other mode of payments.
    Example: Sales order triggers delivery and billing immediately.
    Sales Order:$ 100
    Payment: $100
    F.13 cleared.
    ===========================
    Exchange
    Return sales order:$100
    No payment
    We have credit memo
    Fresh sales order
    SO: $ 60
    Payment $ 40(We paid to customer)
    There are 3 line items in customer:
    1. Credit memo $ 100
    2. Invoice $ 60
    3. Payment $ 40
    Balance is 0. But customer has not paid this $ 40 from store.
    Requirement:  We want to issue check to customer from SAP if i owe customer money. How can i achieve this?.
    Thanks in advance.
    Regards,
    Jagadeesan

    Resolved by myself...

  • How to include a new field for checking duplicate customer master

    Dear All
    we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
    Procedure:
    Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
    Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
    It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
    Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
    regards,

    Hi
    Use the enhancement SAPMF02D to check these values.
    Regards
    Eduardo

  • How to check the customer class using CRM_PRICING_BADI...

    Hello Experts,
    I am using the said BADI in transaction CRMD_ORDER to check the
    customer class and condition exclusion. What data do I need to use and pass?
    Sorry since I am fairly new to CRM module.Hope you can help me guys.Thank you and take care!

    No answer...

Maybe you are looking for