Quality check on Business Rules gives strang result for OMS-60005

OMS-60005 Functions used to record business rules should be labeled as:
BR_[entity short name]###([decomposition id])_[type abbreviation]
BR_IDE024_CEW, BR_IDE029_CEV, BR_IDE030_CEW, BR_IPF004_CEW are violations but they are valid as far as I know.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

Similar Messages

Validation of business-rule gives error

Hi,
After valadating the following business-rule i get an error message.
0001 FIX ("FY08","50120","DEC")
0002 FIX ("EJV2")
0003 Cleardata "50160" ;
0004 ENDFIX
0005 DATACOPY "50120"->"EJV1" TO "50160"->"EJV2" ;
0006 ENDFIX
The error message is:
Validation error from planning server 'http://sth135.gwnet.nl:19000/HyperionPlanning/servlet/HspAppManagerServlet'.
'Error:Cannot calculate dimension member [50160] with restricted member [50120]An error occurred while running the specified calc script. Check the log for details. on Rule object with name EPMSPEEL.Resultatenrekening.test'OK (O)
It seems to have something to do with a calculation that tries to calculate a member after restricting the calculation to a different member in the same dimension. However, as my knowledge of businessrules is (yet) limited I can not figure out how to adjust the rule properly.

You can not fix on a dimension and do subsequent calculations on that dimension. For example you can not say :
Fix(Jan)
Jan = Feb + March;
EndFix
You need to limit the scope in the fix statment to other dimensions not the one you are trying to calculate

[solved]lspci gives strange results

I just reinstalled, and am trying to get my wireless card up and running. I ran lspci, then lspci -nn, and it gives unexpected results. Instead of listing things like vendors and such as intel, and ralink, it just lists non-useful stuff in a format like this:
xx.xx.x Class [xxxx] Device [xxxx:xxxx] rev 40
(where all x's are digits)
what does this mean? where is the useful information that I was expecting to find (like actual device names)? What did I forget to do?
edit:
Now I have Xorg up, so I'll post the output:
lspci
00:00.0 Class 0600: Device 1002:5957
00:02.0 Class 0604: Device 1002:5978
00:09.0 Class 0604: Device 1002:597e
00:0a.0 Class 0604: Device 1002:597f
00:11.0 Class 0106: Device 1002:4390 (rev 40)
00:12.0 Class 0c03: Device 1002:4397
00:12.2 Class 0c03: Device 1002:4396
00:13.0 Class 0c03: Device 1002:4397
00:13.2 Class 0c03: Device 1002:4396
00:14.0 Class 0c05: Device 1002:4385 (rev 42)
00:14.1 Class 0101: Device 1002:439c (rev 40)
00:14.3 Class 0601: Device 1002:439d (rev 40)
00:14.4 Class 0604: Device 1002:4384 (rev 40)
00:14.5 Class 0c03: Device 1002:4399
00:15.0 Class 0604: Device 1002:43a0
00:16.0 Class 0c03: Device 1002:4397
00:16.2 Class 0c03: Device 1002:4396
00:18.0 Class 0600: Device 1022:1200
00:18.1 Class 0600: Device 1022:1201
00:18.2 Class 0600: Device 1022:1202
00:18.3 Class 0600: Device 1022:1203
00:18.4 Class 0600: Device 1022:1204
01:00.0 Class 0c03: Device 1033:0194 (rev 03)
02:00.0 Class 0200: Device 10ec:8168 (rev 06)
03:00.0 Class 0c00: Device 1106:3403 (rev 01)
04:00.0 Class 0300: Device 10de:0e22 (rev a1)
04:00.1 Class 0403: Device 10de:0beb (rev a1)
05:05.0 Class 0280: Device 1814:0301
05:06.0 Class 0401: Device 1102:0004 (rev 04)
05:06.1 Class 0980: Device 1102:7003 (rev 04)
05:06.2 Class 0c00: Device 1102:4001 (rev 04)
Last edited by Convergence (2012-06-07 02:48:41)

Falconinidy: You're right! That was a bad move. Thanks!

P/L A/c for a single day gives different results for different users

Hi!
     We have SAP B1 8.81 (PL 09) in our office. P/L Account for a particular date gives different value for a single account (Other Income Account) for one user and a consistent value for all other users. The user in question is a super user and does not seem to pick a specific entry posted in the Other Income Account for that day thus giving erroneous result. I have checked the Trial Balance for that day and it gives proper result. Only the P/L account gives erroneous data. Could anyone help with the reason for this.
Thanks
Sreekumar

Hi Jitin,
          Thanks for your reply.
          I tried the way you mentioned. However, the result is the same.
          The entry that I'm talking about is an automatic journal entry posted through the Outgoing Payment option.
          To make it more clear, an outgoing payment to a vendor was posted on 05/19/11 for 1,42,178.32. The check was drawn only for 71,089.16 which was the correct amount and the remaining amount (71,089.16) got posted in the Other Income account. The P/L account for this date is not picking the amount of 71,089.16 in the Other Income Account.
Thanks & Regards
Sreekumar
Edited by: Sreekumar on Jan 31, 2012 5:58 PM

SAP BPM Flow Rule set error: Result for ResultSet is required.

Hi ,
I want to create of Rule set or Flow rule set inside "Process development" perspective.
I have defined one process under "Processes" folder. After this, I want to create a rule set under "Rule Sets" folder.
While creating a rule set, it prompts for "Result for ResultSet is Required" but I don't get anything in drop down select. Please help me whats going wrong here.
Regards,
Aman

Hi Aman,
Have you mentioned the Return Type in signature while creating RuleSet ?
Refer the document : SAP NetWeaver Business Process Management Resource Center
-Abhijeet

NonLinearFitWithMaxIters does not give correct results for phase

Dear all,
I am trying to fit a sin cuve with NonLinearFitWithMaxIters function of labwindows, but the results given by this function are dispersed a lot (the function does not give same results).
In fact, I have two waveforms signals v and i (of 104 points), and I find the phase between the two signals with NonLinearFitWithMaxIters.
The two singals v and i are measured with an osciloscope.
I use the following fit functions :
v=p1*sin(wt+p2) ;
i=p3*sin(wt+p4) ;
I use the NonLinearFitWithMaxIters function to fit the data and to have the parameters p1, p2, p3, p4. Then, the phase is claculated as follow phase=p4-p3.
The problem is that the phase calculted between the two signals (v and i) is different for each run for the same conditions.
In fact, for a same condition, I measure different times the signals v and i, and I calculate the phase p4-p3, using NonLinearFitWithMaxIters. The goal is to calculate a mean of phases for the same condition. For example, there are cases where the phase=-5 degree, and other cases when phase=12 degree.
For ten measures of v and i, the phase calculated is different. I get a big dispersion between the phases.
I would like to know please why I have a big difference in phases calculated with the same condition?whern using NonLinearFitWithMaxIters.
I read that this function does not give all time the correct results, is there a way to know when the results are not corrects and when they are correct ?
And is there any solution to find accuratly the phase between the two waveforms.
Thank you for your precious answer.

The pseudocode which I am using is :
v_err=NonLinearFitWithMaxIters(array_x,array_v,v_y_fit,1252,100,sinus,v_coef,2,&v_mean_squareError);
The fit function is
double sinus(double x, double a[],int noef){
return (a[0]*sin((w*x)+a[1]));
I use the same inital coeficient of v_coef for each run :
v_coef[0]=0.03;
v_coef[1]=0.2;
These coeficient are choosen arbitrary.
In this case, the number of points of the data is 1252 (the data of array_v).
The number of iterations is 100.
For the array_x, the distance between adjacents values of the array is dt=0.4*1e-9(difference between array_x[i] anv array_x[i+1]=dt=0.4*1e-9 ).
for (i=0;i<1252;i++){
array_x[i]=i*(0.4*1e-9);
The means square error returnned by the function when it is complished is small, of the order of 0,001.
I read the help
« From the help:
You must pass a pointer to the nonlinear function f(x,a) along with a set of initial guess coefficients a. NonLinearFitWithMaxIters does not always give the correct answer. The correct output sometimes depends on the initial choice of a. It is very important to verify the final result.
That means that the function cannot be used, as it does not give correct results. How
can we check if the results are good or not ? in my case.
I think that in my case, the function does not give correct results, but how can I check if the results are good, or not ? The mean square error is small.

Strange result for outer join with rownum

I'm using rownum in join condition of left outer join query but i'm getting strange results.
Query is:
Select * from table1 left outer join table2 on table1.id = table2.id or rownum=1
Data in table1 is
id
7
8
9
Data in table2 is
id
10
11
12
Result of above query in Oracle 9.2.0.1 is
table1.id table2.id
7 10
7 11
7 12
8 10
8 11
8 12
9 10
9 11
9 12
Even if change is rownum related condition to like rownum >2 even than i'm getting same result.
In case of inner join, the above condition gives results as required.
Can anybody explain the result or is it a bug?

could you please explain why you are using rownum.
You may have a look at the following link explaining rownum and you should understand why you got this result, keep in mind that you are using an OR condition.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/sql_elements6a.htm#4295

NumberFormat Parse gives incorrect result for comma separator

I have a string 1,5 and i am creating NumberFormat with US locale. I expect NumberFormat.parse method to give me exception for string 1,5 string. But it doesn't. The result is 15 for 1,5 string. Please help.
I have a class where i did test. I have tried 3 cases. All 3 cases didn't work. Any idea how to solve it?
import java.util.*;
import java.text.*;
public class testv
     public static void main(String[] args)
          DecimalFormatSymbols symbols = new DecimalFormatSymbols(Locale.US);
          System.out.println("Decimal separator: "+symbols.getDecimalSeparator());
          System.out.println("Group separator: "+symbols.getGroupingSeparator());
          String s = "1,5";
          NumberFormat fmt = NumberFormat.getInstance(Locale.getDefault());
          Number num = null;
          try
               //start of case 1*********
               num = fmt.parse(s);
               //end of case 1************ desn't work
               //start of case 2*********
               /*ParsePosition parsePosition = new ParsePosition(0);
               num = fmt.parse( s, parsePosition);
               if (! ((parsePosition.getIndex()) == ( s.length() )) )
                    throw new ParseException("parseerror",0);
               //end of case 2*********          desn't work
               //start of case 3*********
               /*if (fmt instanceof DecimalFormat)
                    ParsePosition parsePosition = new ParsePosition(0);
                    num = fmt.parse( s, parsePosition);
                    if (! ((parsePosition.getIndex()) == ( s.length() )) )
                         throw new ParseException("parseerror",0);
               //end of case 3************ desn't work
          catch (Exception e)
               e.printStackTrace();
          System.out.println("Parse string: "+s+" result: " + num.toString()+" result in double: "+num.doubleValue()+" locale: "+Locale.getDefault());
     }

Hi,
According to your description, I am afraid your problem is out of support in C# forum. For ASP.NET question, please go to
ASP.NET Forum to post your thread.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

CSS: img {Float: Left; } gives strange results in Firefox

Hi, I’m having trouble aligning some text to the right
of an image. It looks fine in IE6 but the entire page goes crazy in
Firefox. Here is the link:
http://www.option-price.com/test/index.php
I already have a few pages in place and I just wanted to add
a contact link to the right above the main navigation. Here are the
main pages:
http://www.option-price.com/index.php
The thing is…I could probably do it by creating a
nesting div around the logo div and then another div inside for the
new link (and float to right), but I was trying to cut down on
code.
Can I get this to work using img float in FireFox?
Many thanks.

petertyler wrote:
> Hi, I?m having trouble aligning some text to the right
of an image. It looks
> fine in IE6 but the entire page goes crazy in Firefox.
Here is the link:
>
>
http://www.option-price.com/test/index.php
>
> I already have a few pages in place and I just wanted to
add a contact link to
> the right above the main navigation. Here are the main
pages:
>
>
http://www.option-price.com/index.php
>
> The thing is?I could probably do it by creating a
nesting div around the logo
> div and then another div inside for the new link (and
float to right), but I
> was trying to cut down on code.
>
> Can I get this to work using img float in FireFox?
>
> Many thanks.
>
You would have to float the image in the logo <div>
left. Add another
<div> inside the logo <div> and float that right,
as below.
Html code:
<div id="logo"><img src="index_files/logo.jpg"
alt="Option-Price.com"><div
id="logoRight">Contact</div>
<br style="clear:both;" /></div>
Css:
#logo {
margin: 0px 0px 0px 100px;
padding: 0px;
width: 600px; /* YOU NEED A WIDTH */
#logo img {
float: left;
#logoRight {
float: right;
width: 200px;
text-align: right;
padding-top: 45px;
A simpler method would be to use an absolutely positioned
layer. I can't
see that anything moves on the site which would'nt warrant
the use of an
ap layer in the position you require it.

Double clicking project gives strange results

If I open FCP 6.02 I can groove and edit no problems. However, some of the FCP project files, if I double click them FCP prompts me for a serial number and to register. If I quit and open FCP directly, no more prompting.
This has only happened to me since switching to Leopard. Never happened in Tiger.

Michael Trauffer has solved this in other posts by doing the following:
Using the Finder, navigate to the following location:
systemHD/Library/Application Support/ProApps/Final Cut Studio System ID
Move the file to the trash, next time you launch FCP, you'll be prompted to enter your serial number, after you do that, a new system ID file will be created. That should solve your problem.

Strange result for idoc job

dear experts,
i encountered a strange issue about job please see the below detail.
thirst for your help. thanks very much.
background: These is a Z program which is used to generate IDOC using MASTER_IDOC_DISTRIBUTE.
                      (the idoc is used to send billing invoice info.)
                      The program also will write a result report.
                      The Job has two step: 1.call the Z program with a variant. 2.call program RSEOUT00 to delivery idoc.
The issue:     In the job spool list it show all the invoice that sent successfully.
                      In the idoc we have one field like V_TYPE.
                      The job is ok for 2 years and recently the strange stage occur, because there will be several idoc generate,
                      but in the first IDOC for every JOB, the value of V_TYPE was fix to one value (for example 'F')
                      (as the program logic the vaule is set wrongly.)
                      It first occured in March, and some days later it was recover automatically, but recently it occurred again,
                      about 15 days, but till now it recover again from yesterday....
So, could you provide some clew? I think it's not relevant with the program logic.

It's a bug in your code.
mm is not the month. mm is the minute... which you already know since you use it elsewhere.
Try the pattern of
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");

GetFloatProperty gives wrong result for values out of range

Hi
When the method setFloatProperty is called by setting the float values out of the range,then calling getFloatProperty does not give NumberFormatException.
Float value set more the MAX_VALUE of float returns infinity when getFloatProperty is called.Similar problem occurs with setDoubleProperty.This behavior is confusing.can anyone help me out.
Regards
saroj13

Throwing a NumberFormatException would never make sense in this situation. The exception indicates that you are trying to convert a String to a number, but the String does not contain a valid number. eg. "as3"; when a conversion was attemted would throw a NumberFormatException.
Floats and Doubles in Java comply with the IEEE 754 standard which mandates the behaviour of the types.
Could you explain why you find this confusing?
Hope this helps.

ResultSet returning strange results for BIGINT datatype, using rs.getLong()

In a MySQL db I have a value of 10 for the BIGINT primary key column 'account', which is auto-incrementing.
The result of rs.getLong("account") is:
4.294967305E9
Not exactly the answer I was looking for. The other column, 'phoneNum', also a BIGINT, and also using rs.getLong("phoneNum") is returning correctly.
And ideas why?

The number in question is 4,294,967,305. There was another thread here recently about MySQL using numbers that are just slightly above 2^32 (which is 4,294,967,296) in auto-increment columns.

Week function gives wrong result for last week in year

Week(CreateDate(2011,12,25)) returns 51 - correct
Week(CreateDate(2011,12,26)) returns 53 - wrong
It looks like all last weeks of the year are 53 whereas the next year with 53 weeks should be 2015.
See http://tuxgraphics.org/toolbox/calendar.html for example.
I am running CF9 on Windows 7 with Java V6 update 29.
This is causing me a problem. Any ideas for a workaround?
Doug

Here is my general solution for my cfc which seems to work for all dates up to 2100 at least.
Hope it can help if you need a Week function to replace the CF one.
<cffunction name="getISOWeekNum" access="public" returntype="Numeric" hint="Gets ISO week number in which date occurs.">
    <cfargument name="date" type="date" required="true" hint="Date for which you wish to know the week number">
    <cfset var weeknum = 0>
    <cfset var isLeap = isLeapYear(Year(date))>
    <cfset var dayInWeek = dayOfWeek(date)>
    <cfset var isoDayOfWeek = iIf(dayInWeek GT 1, dayInWeek - 1, 7)>
    <cfset var nearestThur = dateAdd("d", 4 - isoDayOfWeek, date)>
    <cfset var fourthDayOfYear = createDate(year(nearestThur), 1, 4)>
    <cfset var fourthDayInWeek = dayOfWeek(fourthDayOfYear)>
    <cfset var fourthIsoDayOfWeek = iif(fourthDayInWeek GT 1, fourthDayInWeek - 1, 7)>
    <cfset var firstThur = dateAdd("d", 4 - fourthIsoDayOfWeek, fourthDayOfYear)>
    <cfset var lastWeek = iIf(fourthDayInWeek EQ 8 OR (isLeap AND fourthDayInWeek EQ 7), 53, 52)>
    <cfset var firstIsoDayOfFirstWeek = dateAdd("d", -(fourthIsoDayOfWeek-1), fourthDayOfYear)>
    <cfset var firstIsoDayOfLastWeek = dateAdd("d", -7, firstIsoDayOfFirstWeek)>
    <cfset var lastIsoDayOfFirstWeek = dateAdd("d", 6, firstIsoDayOfFirstWeek)>
    <cfset var weekDiff = iIf(dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1, 0, 1)>
    <cfif dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
        <cfset weeknum = lastWeek>
    <cfelseif dateCompare(date, lastIsoDayOfFirstWeek, "d") NEQ 1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
        <cfset weeknum = 1>
    <cfelse>
        <cfset weeknum = weekDiff + (dateDiff("d", firstThur, nearestThur) / 7)>
    </cfif>
    <cfreturn weeknum>
</cffunction>
Doug

Business Rule Issue in Planning

Hi All,
I am working on a business rule and I ve tried doing it many ways but still unable to achieve the desired results. Please find the BR below:-
FIX(@CHILDREN("Vendor Expenses")
,{Scenario},@Relative("Year",0),"No VendorCategory")
{UPKVendor}
IF (@ISUDA({UPKVendor},Master))
{UPKMasterVendor}= @MEMBER(@CONCATENATE("V",@NAME({UPKVendor})));
{ToVersion}->@IDescendants({UPKMasterVendor}) = {FromVersion}->@IDescendants({UPKMasterVendor})
ELSE
{ToVersion}->{UPKVendor}={FromVersion}->{UPKVendor};
ENDIF
ENDFIX
Assumptions :-
{UPKVendor} is a runtime prompt of type "Member" who's value is initiated from the web form (Vendor Dimension which is tagged with UDA's to identify the type of project)
{UPKMasterVendor} is a runtime prompt of type "Member" who's value is constructed by concatenating "V" to the {UPKVendor}
{ToVersion} & {FromVersion} are runtime prompt's as well and the user can select the values for these prompts as part of the business rule.
Desired Results:-
IF A VENDOR IS A "MASTER" Vendor, WHICH IS IDENTIFIED USING THE UDA
THEN COPY THE UPKMASTERVENDOR AND IT's DESCENDANTS FROM THE ONE VERSION (FROMVersion) to ANOTHER VERSION (TOVersion)
For some reason, the calc manager is not formulating @IDescandants({UPKMasterVendor})
{ToVersion}->@IDescendants({UPKMasterVendor}) = {FromVersion}->@IDescendants({UPKMasterVendor})
Any help is greatly appreciated.
Thanks,
Cz

Hi,
The issue here is that you are trying to assign a member string in a variable on runtime which is not quite possible in Calc Script language. As discussed here number of times and once more quite recently, Calc Script does not support object type (including string) assignment. You can only assign numeric values to members and variables alike. You should try something like @Match function or If condition to achieve what you are doing. Another issue in your script is that you use @Descendants in an equation. You should use @Descendants to restrict the boundaries of your calculation (IF(@ISMBR..., FIX etc) but not in equations.
Just to give an idea, have a look at below sample:
IF (@ISUDA({UPKVendor},Master))
IF(@ISMBR(@Descendants((@MEMBER(@CONCATENATE("V",@NAME({UPKVendor})))))
{ToVersion}= {FromVersion};
ENDIF
ENDIF
Cheers,
Alp

Quality check on Business Rules gives strang result for OMS-60005

Similar Messages

Maybe you are looking for