Quality Gate MGMt

Hallo colleagues
My company would like to start using Quality Gate Management functionality but we don`t have any expertise in this component, do you have any doc or note that shows how to configure this task ?
I appreciate your help, please, do the needful to help me in this doubt.

Hi
You can check below
http://www.solutionmanagerexpert.com/article.cfm?id=5134
http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e050c61c-59ed-2c10-7e94-990fa6b95538
Change Control With SAP Quality Gate Management
http://wiki.sdn.sap.com/wiki/display/SMAUTH/QualityGateManagement
Morover just logon to solman check in spro
Hope above helps
regards
prakhar

Similar Messages

  • Quality Gate Management - new features in SPS 23 but no documentation

    Dear SDN Members,
    After an update to SPS 24, we noticed 2 new buttons in a Quality Gate project:
    - Reassign Transport Requests
    - Distribute Transport of Copies
    I can imagine the functionality of both by deduction from what is available in CHaRM.
    It is nevertheless impossible to find further documentation.
    So, any help on how to configure and / or use these functions will be appreciated.
    Regards.

    Hello Jos,
    please see the below links:
    for a global introduction:
    https://websmp203.sap-ag.de/e2e -> change control management : Quality Gate Management
    for a detailed documentation
    http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
    -> Under Change Request Management and Change Management click on Quality Gate Management
    - Reassign Transport Requests
    - Distribute Transport of Copies
    are two functionalities that existed even before Quality Gate concept. Those were available in tasklists and change documents of Change Request Management of Solman.
    You ll definitely find more info on both on this forum by sarching transport of copie and transport request reassignment.
    One more thing : for the reassignment of TR; it does nt allow you moving a TR from a Solman project to another. It only let you assign an open (modifiable) in a dev satelilite system to a CTS project (linked to a Solman Project) so you can manage its release and import from Solman
    Hope this helps
    Regards
    Khalil
    Edited by: Khalil SERRHINI on Jul 26, 2010 1:54 PM

  • Activating sm_quality_gate Quality Gate Management service

    HI
    we have been using ChaRM in SOlution Manager 7.0 EHP1, we are intending to exploit more functions of solution manager , i.e Implementation Project. The question is if we activate service for Quality Gate Management , there will be any impact on our maintenance cycle???
    Please guide

    Hi
    Yes you can
    http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/content.htm
    more doc can be check above
    further for solman 7.1 new functions check this link
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
    regards
    prakhar
    Edited by: Prakhar Saxena on Nov 28, 2011 6:04 PM

  • Difference in Transport Request in SOLAR_PROJECT_ADMIN & Quality Gate

    Hi
    I want to ask about how Quality Gate works in an Implementation Project??
    How a quality manager role comes in action?? how a project is transported into landscape??
    What is the difference in creating transport request from SOLAR_PROJECT_ADMIN and creating Transport request from Quality Gate Management in Change Management Workcenter???
    Please guide
    Thanks & Regards
    Sidra

    Hi,
    check this
    http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/where-are-uploaded-office-documents-physically-stored-in-sap-2647587?cv=expanded
    as per above link u can try with option
    1.
    use Tcode - SOLAR_PROJECT_ADMIN
    1. Select the project in the project overview.
    2. Choose the Transport Project pushbutton or Project ® Transport.
    3. Specify the transport scope in the following dialog box. To transport the project without project documentation, reset the With Notes flag. The project documentation is transported by default.
    4. Specify a transport request or create a new one.
    5. Save your entries.
    Regards,
    Ravi

  • Quality Gate Management workflow

    Hi Gurus,
    I have successfully implemented Quality Gate Management POC for a 4 System Landscape.I have few questions.
    My questions are:
    1. Can we have control on moving only block of change requests at any specific point of time to PRODUCTION
    For Eg: Let us suppose there are 50 Change Requests which are pending to move to PRODUCTION. Can I move only 25 Change Requests at a specific time and the other 25 at some other time to PRODUCTION instead of moving all the 50 at a time (the option START IMPORT will move all the CHANGE REQUESTS into PRODUCTION at one time)? I am able to move only specific block of Change Requests from DEV to QUALITY. But not from QUALITY to PRODUCTION.
    2. Is there any possibilty of using the CROSS SYSTEM OBJECT LOCKING in QGM without using CHARM?
    Thanks,
    Sandeep

    Waiting for replies
    Thanks,
    Sandeep

  • Is CTS+ configuration a prerequisite to Quality Gates ?

    Hello,
    I have heard that CTS+ has to be configured first before I can configure Quality Gates on my Solution Manager system. 
    Does anyone know if this is true?
    Thanks,
    Judith

    Dear Judith,
    According to SAP Note 1256490 it states TMS has to be activated.
    So this would cover ABAP systems.
    The Note also makes reference to Note 1256490 - regarding an issue for NON-ABAP systems and CTS+,
    which would indicate that TMS is the prerequisite transport for ABAP systems, but it can be infered for
    non-ABAP systems CTS+ is the required transport.
    Hope this helps.
    Regards,
    Paul

  • QM inspection at various quality gates during production

    Hi All,
    We need clarification on how to plan inspection during production at various stages.
    1. How to trigger and use inspection point planning at various inspection stages??
    2. How will the characteristic be activated, processed and closed at various inspection stages??
    3. How to define different characteristic at different inspection stages?
    4. Will a single inspection lot be generated for entire production of a machine or separate lot will be generated at all the inspection stages??
    If possible, please provide the process flow.
    Thanks & Regards,
    Ritesh

    First questions
    1. How to trigger and use inspection point planning at various inspection stages??
    .. QCC0 > Quality Planning > Inspection Planning > General > Define Identifier for Inspection Points
    2. How will the characteristic be activated, processed and closed at various inspection stages??
    .. When user define new inspection point at result recording, system activates the characteristics automatically based on inspection plan.
    3. How to define different characteristic at different inspection stages?
    .. Not possible with inspection point function in SAP standard
    .. You have to define all characteristics at inspection plan or use add characteristic function at result recording.
    4. Will a single inspection lot be generated for entire production of a machine or separate lot will be generated at all the inspection stages??
    .. It depends on production order process because inspection lot for production is generated based on production order.
    Second questions
    1. How can we define partial inspection points within production processes?
    .. QCC0 > Quality Planning > Inspection Planning > General > Define Identifier for Inspection Points
    2. Process to activate and process characteristics at every inspection points?
    .. Yes
    3. Is it possible to allot score against those characteristics during inspection?
    .. Allocation is not possible, only add is possible.
    4. How is partial check points processed and closed?
    .. You can define it in operation header detail of inspection plan.
    5. Is defect recording done at every inspection point or at the end?
    .. Every inspection point
    5. How to summarize the result and close the inspection lot finally??
    .. System summarize the result automatically when you execute usage decision transaction.
    Regards, DoWook Kim.

  • Question about Quality Gate Management

    Hi Solman profis,
    I have questions about the transport requests in QGM.
    My Solution Manager is 7.1.
    I have a Solman project, in which I activated QGM and created a Change and created two transport requests (one workbench, one customizing) attached to it, .
    I'm little bit confused by the concept.
    My questions are:
    1. Why I cannot see the transport requests that I created previously in the DEV system manually? If it's normal, for which reason is this designed like this? If it's not normal, how can I configure to see those requests?
    2. What is the difference between the Change here in QGM and the Change in ChaRM?
    3. In practice, how should the transport requests be created? By the developer in DEV systems, or by the responsibles in Solution Manager Workbench (Change Management Workbench)?
    Thanks a lot!
    Edited by: Charlie Red on Feb 13, 2012 12:08 PM
    Edited by: Charlie Red on Feb 13, 2012 12:09 PM

    For the 3rd question, I think TRs should be created in Change Management Workcenter, is it the correct process?
    For the other questions, can somebody give some input?

  • Error in CHARM configuration to move JAVA objects 'The project is not relea

    Hi,
    I have BI 7.0 (ABAP + JAVA) landscape (i.e. CBD, CBQ and CBP) on SPS12 and SolMan 7.0 (SMD) on SPS14.  My goal is to move both ABAP and JAVA transports through CHARM. I performed following tasks:
    1.  Configured TMS by selecting CBD as Transport Domain controller to move Java transports
    2.  Configured CHARM for BI landscape to move ABAP transports in SMD and it is working fine
    3.  Configured CTS+ to move JAVA transports on SMD instead of CBD because CTS_BROWSER service is not available on CBD due to SPS12. While configuring CTS+ in SMD, I used SIDs for BI Java landscape as reverse SID (i.e. DBC, QBC and PBC) and used mapping parameter to map to original SID.  I used reverse SID because already in SMD (CBD, CBQ and CBP) has been defined for CHARM purpose. Now, I am able to move successfully JAVA transports of BI landscape from SMD.
    4.  I am having issue in configuring CHARM on SMD for JAVA transports.  I am following http://service.sap.com/solutionmanager --> Media Library --> TechnicalPapers --> How to Set Up and Use eCTS/ChaRM Solution Manager 4.0 SP12 document.  Following are the steps, I performed to move JAVA transport through CHARM:
         a.  Defined JAVA systems (i.e. DBC, QBC and PBC) in SMSY as Enterprise portal systems
         b.  Defined ABAP system (i.e. Where Transport request is created, in my case it is SMD) in SMSY
         c.  Defined logical component for both ABAP and JAVA systems
         d.  Defined solution manager project by adding two logical components created at step C (i.e. ABAP and JAVA)
         e.  I am getting error when I am trying to activate CHARM and create task list.  The error is as follows:
    /TMWFLOW/TRACKN 101: 'Warning: Problems occurred during synchronization of the system landscape'.
    If you choose 'Check', the system displays the following message in the results list of the check:
    /TMWFLOW/TRACK_N 806: 'No consolidation system found for SMD-200 (project zjava3)'
    If you try to create a task list by choosing the relevant pushbutton, the system issues message
    /TMWFLOW/CONFIG_UI 017: 'The project is not released. Hence cycle can not be created'.
    I found a relevant sap note for this 1054264 but it is not useful me, as it suggest to upgrade SolMan to SPS12 but whereas I am on SPS 14.
    Any suggestion are welcome.  Thanks in advance.
    Regards
    Shiv

    Hello
    You should first fix the errors you get such as the missing consolidation system
    Please see thread [Re: No consolidation system found for SID in solman; or check the forum on the error message "'No consolidation system found for" and you will find relevant information.
    I would advise to update your SAP Solution Manager though to one of the latest available levels, there are a lot of fixes and enhancements to Charm (and also availability of quality gate management which gives some of the functionality of Charm but is more compact).
    Kind regards
    Tom

  • QGM for Greenfield SAP Implementation

    Hi All,
    We are doing a greenfield SAP implementation. As of now we are done with DEV landscape build. We would like to utilize Quality Gate Management for Change Management in our project. I have few queries:
    1) How should I define Transport routes at this stage to activate QGM? We have only DEV systems as of now. QAS and PRD would be ready in next few months. Can I activate QGM now with logical component containing only DEV systems?
    2) Once the QAS and PRD systems are ready; How to include them in the existing QGM project?
    Any documentation or input are really appreciated.
    Regards,
    Vivek

    Achieved this using the virtual systems as mentioned in this excellent blog.
    http://scn.sap.com/docs/DOC-31352
    Regards,
    Vivek

  • ChaRM and BI Transports

    We have setup and configured ChaRM and started using it for an ECC Implementation Project and tested an ECC Maintenance Project.
    However, Per OSS Note 1115759 (and experiences!), we do not use import all functionality for our SAP BI environment.  
    With ChaRM, it seems import all (or at least import all for the project) is used for both the implementation project and normal corrections of the maintenance project.   We are not sure what to do for BI.
    Does anyone have experience/recommendations for ChaRM with BI Systems?
    Thanks!
    Christine

    Hello
    You should first fix the errors you get such as the missing consolidation system
    Please see thread [Re: No consolidation system found for SID in solman; or check the forum on the error message "'No consolidation system found for" and you will find relevant information.
    I would advise to update your SAP Solution Manager though to one of the latest available levels, there are a lot of fixes and enhancements to Charm (and also availability of quality gate management which gives some of the functionality of Charm but is more compact).
    Kind regards
    Tom

  • Continuous change management with SolMan?

    Hello,
    I wonder wether it is possible do run a continuous change management with Solution Manager for all changes I want to implement in a System?
    What I need is a solution to manage all the common change requests and not only for single projects.
    Can you help me?
    Thanks in advance
    Bye

    yes it is possible across the project using Quality Gate management in EHP1 version
    http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
    Quality Gate Management gives you an overview of the status of the software distribution of your projects. It gives an integrated and consistent overview of the implementation of changes to your SAP software solution, for all operational units of the various organizations in a company. This increases the transparency of the software change process.
    Quality Gate Management combines different software developments in one logical structure. These developments are in turn collected in projects. You can organize and monitor the distribution of software by projects and their changes.
    http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
    The prerequisites for setting-up quality gate management are:
    Assign quality gate management roles
    Configure the system landscape in the Transport Management System (TMS)
    Create a project in the Project Administration and enter required data in Quality Gate Management.
    also check this note
    Note 1256490 - General note for Quality Gate Management (QGM)
    Hope it solves ur doubt
    Regards
    Prakhar

  • Difference between SAP cProjects and SAP Project System

    Hi,
    SAP already has a solution PS ( Project System ) for managing the projects in an Organization.
    When there is a solution already existing then why did SAP come up with a new solution cProjects ?
    Can any help me in understanding the main differences and advantages between cProjects and PS ?
    Thanks and Best Regards,
    Priyatham

    Hi.
    I have copied an SAP text below which sets PS, cProjects, (x)RPM and PPM into context.
    In the ninties, the Project System was developed within SAP R/3 to provide a powerful application with full integration into logistics and financials.
    Target groups were industries such as engineering and construction, automotive, high tech or utilities with focus on project manufacturing or large maintenance projects.
    Later on, the need for more flexible and easy-to-use tools supporting the new process methodologies, phased-based approaches, quality gates, and so on, emerged. SAP developed Collaboration Projects and Collaboration Folders (cProjects Suite), which takes these new requirements into account and provides extensive features to collaborate with internal and external partners using a HTML-like interface and Web Application Server technology.
    Thus, cProjects was able to address to a broader range of industries, such as service providers, offering a high degree of visibility and flexibility to support various scenarios from product development to consulting projects. Nevertheless, cProjects is seen as a complementary product to Project System, not as ist successor!
    It always depends on the scenario that a customer wants to cover, which application is the best choice.
    As another matter of fact, combinations of both are also possible.
    In addition to this, the new generation of composite applications was born and SAP xApp for Resource and Portfolio Management provides excellent capabilities to align operational project management with strategic portfolio management.
    The latest developments bring all these three applications tighter together and offers a comprehensive solution for project and portfolio management by covering logistical, financial and human resource aspects and addressing the needs of all stakeholders throughout the entire organisation.
    However, xRPM capabilities are not only restricted to project portfolios but can be leveraged to control all kind of portfolio items.
    Regards / Anders

  • Low quality call

    Hi.
    I am in Canada, on a low-speed upload connection (1 Mbps). That's how it is, all providers offer pretty much the same speed. I use skype to call my parents in Romania, with a huge upload speed (40 Mbps). For several months we have this problem: they don't understand my voice at all, they describe they hear some "noisy vibrations" which cover completely what I say.
    I am sure it is a problem with skype, and with the newer versions, I talked in the past with my parents without any glitch. I also know it's not something related to the microphone/drivers/Windows errors, as once I took my laptop to a place where the upload speed was 30 Mbps and my parents heard me perfectly.
    Any ideas on what I could try?
    Thanks!

    costelus wrote:
    Now that was very helpful indeed, thank you!
    (It was expected that, once taken over by Microsoft, the quality of the calls on skype must drop).
    Ah- there's the rub!! I used Skype pre-Microsoft and post-M-soft. I CAN NO LONGER UNDERSTAND MY CALLERS!!!! I can *hear* them fine- the volume is fine, but the bandwidth allocations have narrowed so, that the consonants such as "S"and "F" are no longer discernible. The caller I speak with is unintelligible! Thus making the call WORTHLESS. I have considered deleting my Skype usage and account and going with another carrier, using equipment called an "ATA" (analog telephone adapter) through ObiTalk and using a global carrier (NOT skype). I do have high speed data internet- matters not whether I am using a desktop, smartphone, anything- even on another's account- the voice quality is MISERABLE and UNUSABLE now. SKPYE IS AWFUL. I am actually wondering if Microsoft WANTS skype to fail- as in, a conspiracy theory that Gates hates Skype SO much that he wants it to just "die". Soo disappointed with Skype now.

  • Goods Receipt of a material in Quality aswell as Unrestricted stock

    Hi All,
    When receiving material against PO from different vendors ,stock from few vendors should go into Quality stock whereas receipts from other vendors should be received into Unrestricted stock.
    Please suggest how to achieve this.
    Regards

    Hi,
    Thanks for your replies but i had made the selections as per senthil's suggestions but still the Inspection lot is being created and the stock is posted into Quality.I am not sure which CTRL Key to select i have tried the underlined ones from below ..should i be selecting some other key and are there any more settings that need to be done.
    0000 No active functions
    0001 Vendor release (with Warning)
    0002 Vendor release, tech. delivery terms
    0003 Vend.release, tech.del.terms, QA agreem.
    0004 Vend.rel,TechDelT.,QA agreement,certif.
    0005 Vendor release, certificate
    0006 Delivery release, documentation required
    0007 Delivery release, invoice block
    0051 Vendor release, certificate,Inv Block
    0052 Vendor release, Inv Block
    0053 Inv Block
    0054 Vendor release, certificate, error mess
    0055 Vendor release, certif, inv block, error
    0056 Vendor release (with Error)
    0057 Certificate,Inv Block (with Warning)
    0058 PBB - VenRel/Cert + Sub Spec Mgmt
    0059 PBB - VenRel/Cert + Packing/SMI
    0060 certificate required
    8888 Vendor block inactive
    9999 All functions active with error message
    Regards

Maybe you are looking for