Quality settings and I-Link Philips / SONY

Hi,
THX for all answers.
Now I have some more questions, sorry it never ends.
ADOBE Premiere Pro CS 6.x.x / Windows 7 HP x64
1. a
When exporting to a file. Wich setting do you prefer best quality to export a file?
There are a lot of differens types, I have tried AVI standard settings and it took
about 65-min to finish a project in a 46-min sequense?
1. b
Is it possible to burn a DVD directly from Premiere's interface?
2.
From Project settings / General / Video rendering and Playback /
Renderer: is grayed out.
- Why?
3.
From Preferences / Playback / DV Setup Dialog / Aspect Ratio Conversion /
When changing to software and hit OK button it wil not change!!!!
Last question this night: I-Link?
I managed to record from timeline into SONY HVR-HD1000E using I-Link but there was no sound so
I changed to ADOBE DV under sound settings and it worked but sound dissapered from desktop?
I can live with it, no problem.
Philips DVDR 3355 vs SONY HVR-HD1000E
And now to the question:
I also have a Philips DVDR 3355 with I-Link.
When connect SONY HVR-HD1000E via I-Link into Philips DVDR 3355 and record a DVD it is OK.
But when connect Philips DVDR 3355 via I-Link to computer, there is no signal into DVDR 3355?
I have tried to change some settings in Premiere but no luck!
Is my Philips DVDR 3355 not compatible with this kind of settings?
Why doing this? I will spare the time to export to AVI-file...
THX in advanced,
KH

>Is it possible to burn a DVD directly from Premiere's interface?
No, you use the bundled Encore CS6
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has information about using Encore

Similar Messages

Adobe addin for Excel loses Print Quality settings

I have Acrobat PDFMaker Office COM Addin from Acrobat 10.0 installed in Excel 2010. I have a workbook with numerous worksheets. Normally, the print quality is set at 600 dpi. Some of the worksheets sometimes switch randomly to 72 dpi. There are 2 problems with that. One is that it messes up the pagination which isn't a big deal. The other is that every time the print job hits a worksheet with a different dpi setting, it forces a new file instead of printing everything as one output file. Resetting the Print Quality settings and saving the file does not keep it from happening over and over. What would cause this and how can it be fixed?
Thanks,
Barry

Hi Bill@VT,
Thanks for your response. I guess I should clarify a few things. The PDFMaker addin actually shows up in the printer list as 'Adobe PDF'. So, yes, I am changing the printer to Adobe PDF before I "print" to the PDF file. I do not know what a "settings file" is. Can you elaborate on that? I should also mention that this process worked fine for a couple years before it started acting weird a few months ago.
I am skeptical that the Excel file itself is the problem, only because the dpi setting is in the printer driver and is not one of the settings accessible using the VBA macro language.
Regards,
Barry

Video Quality Settings

What happened to the video quality settings that used to be in older versions of flash player? When I used to right click over the video/animation I would get a window that let me select low, medium or high quality for the content being played. I liked this feature as I have a slow connection speed and the low quality setting would speed things up. Should I downgrade to one of the previous versions or is that possible? Thanks ; )

I forgot to actually put what my question was. My question following my previous ramble was can I change the video quality settings and if so where do I go to do it?

SharePoint 2013 - Site Settings - Users and permissions - "Access Request and invitations" link missing

I am site collection administrator and have configured the outgoing email in Central administration but "Access Request and invitations" link is missing, pl advice any additional configurations for this link to show up
I was though able to configure access requests by going to Site Settings->Users and permission and on the ribbon selected "Access Request Settings"
What is the difference in either of the approaches?
Thanks
Abhishek

Hi there,
I noticed this post, and didnt really find an appropriate solution to your issue. I noticed the same issue when dealing with Access Requests. First of all to make sure that the Request feature is enabled, you need to access
Site Settings -> Site Permissions -> Access Request Settings -> Make sure the
'Allow access requests' option is enabled.
The Allow access screen just allows you to enable the feature and also to specify a email address that notifications are sent to. Whereas the 'Access Requests and Invitations' section provides a screen to manage Access Requests and request history.
I noticed then that the Access Requests and Invitations link under 'User and Permissions' didnt actually appear until someone actually requests to join the site. It seems that this is needed to display the screen. Once actioned once, the option stays there.
Hope it helps

How can I stop Acrobat from overriding a printer's draft settings and printing in photo quality?

Regardless of which settings I choose for my printer, Acrobat always prints in maximum quality.
The printer works as expected with every other application I have, from Photoshop, Word and Pages, to Preview and Mail. But when I print a PDF via Acrobat or Reader, the printer lays down so much ink that the paper sometimes comes out damp.
If it matters, the printer is an Epson Stylus Photo 1400, and I'm using Acrobat 8.2.6 and Reader 10.0.3 on a Mac Pro running OS 10.6.7.
To reiterate, every other app I use respects the Epson printer dialog settings when it comes to printing in economy mode. I've looked around in Acrobat's print settings and can find absolutely nothing along the lines of "print in draft quality." Am I the only person who doesn't want, or need, to burn up expensive printer cartridges unnecessarily?
This has been a problem since I bought the software, and it behaved the same way with my old printer (an Epson Stylus Photo 800). I don't need to print very many PDFs, but when I do, the printer wastes an enormous amount of ink.
I'm not looking for a workaround, I just want to be able to open a PDF in Acrobat or Reader, hit CMD-P, choose the economy print setting, and have it actually print in low resolution.
Being able to print a draft copy of a PDF seems to be a perfectly reasonable expectation when using software from the very company that developed the PDF standard in the first place.
Any help would be appreciated.

Understood. I've already checked for driver updates, and am already using the most current version. I really appreciate your trying to help, ... let's hope someone out there has some suggestions, too.
Cheers,
Francis
Francis Zera Photography: Seattle-based architectural and commercial photography + video production, world-wide service
Portfolio:   http://www.zeraphoto.com
ASMP:     http://www.asmpseattle.org/member/franciszera
Twitter:    http://www.twitter.com/zeraphoto
Office:     +206-659-ZERA
Mobile:    +206-335-0200
Mail:        PO Box 46078, Seattle, WA 98146

Cisco AT&T Microcell and D-Link DIR-655 Settings

I finally got my Microcell working again last night when I plugged it directly into the cable modem. I let it sit over night, and it was still working this morning. However, when I went back to the configuration I was using prior to Sunday -- when everything worked -- the constant 3G blinking light returned. The configuration that worked prior to Sunday was as follows: cable modem to DIR-655 Router, and DIR-655 router to M-Cell. Now that configuration no longer works.
So, that leaves me with the question of how, exactly, the DIR-655 should be set up for the M-Cell to work properly? As noted, it worked fine prior to Sunday with the current configuration, but won't work now when plugged into the DIR-655. I have tried the recommended configuration settings listed in the manual for the DIR-655 to no avail. AT&T and D-Link don't have a clue.
Thanks for any info on this.

A number of people seem to have similar complaints on the AT&T forums. I don't work with that device, but I found this:
http://www.anandtech.com/show/3626/att-3g-microcell-a-comprehensive-exploration/4
Which suggests it just uses NTP, DNS and IPSEC with NAT traversal, which should have no problems at all with your setup.
Since AT&T supports the device, your best bet is to probably call them.
One possibility is that the NAT timeouts on the DLink are too agressive for the Microcell. If you are technically inclined, you might want to see what is going on using Wireshark. Does powercycling the Microcell temporarily fix the problem? How long does it run before the 3G LED links again?

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Jpeg quality setting, noise settings and artifacts

I am having difficulty having work accepted by iStock - even at full size at 100% jpe
g export, there is still some. I have cut way back on all enhancements.
I would like some advice to expoering clean images and where i find jpeg setings - or are their similar ones to those in CS5. I have tried saving for web in CS% to no avail. I do get some accepted - about 30% and i have started to use a program called deNoise from Topaz - would appreciate suggestions on all the baove.
Thanks
Greg Summers

Aren't these stock agencies a little paranoid about noise?
Lightroom 3 images may look a little noisier than LR2's at the same slider values. So you might need to add a little more luma noise than before.
As for Jpeg quality settings, read this excellent analysis: http://regex.info/blog/lightroom-goodies/jpeg-quality

HT4436 Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Are they all using the same AppleID?
Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486

Significant quality loss and jagged diagonal lines when exporting from FCP

I've been working on this problem for several days and I'm going insane! Every time I export my movie from Final Cut, there is a significant quality loss. It is most noticeable in two ways: diagonal lines become very jagged (looking somewhat like diagonal lines in an older video game -- more a diagonal sequence of blocks); also, in some areas such as faces, the colors get a little blurry and there seems to some "pooling" of colors around the edges of the face.
I'm pretty sure the problem's not in capture: the Quicktime clips that I captured from the camera are all pristine. When I play them in Quicktime, I can blow them up several times their original size, and they maintain their sharp lines. (I also Reverse Telecined them all with Cinema Tools, if that's relevant.) I also know the problem's not just my computer monitor; when I play these movies on my external monitor and TV, they look bad too. The clips look bad after I bring them into Final Cut, and while I'm editing, but at first I figured that was because Final Cut sometimes doesn't show full resolution in the timeline. Still, when I export, the quality of the original captures just isn't there.
Some details:
Captured from 24A progressive, Sony HVR V1U HDV.
Using Final Cut 6.0.1, Compressor 3.0.1, Quicktime 7.2.0, OS 10.4.10 (all the most recent versions I believe).
I've exported in many different ways: using Compressor (and have tried a number of different settings: the DVD Best Quality 90 Minutes default Setting, as well as using a variety of bit rates from 3.0-8.0, One pass CBR, Two pass CBR, Two pass VBR, Two pass VBR best; Video Formats NTSC, HD 1440x1080...I have tried many combinations. Regardless of the size of the m2v created, the files seem to have the same problem over and over. I've also tried exporting from Final Cut as a Quicktime Movie and with Quicktime Conversion. Same result. I also tried using different compressors with my Final Cut sequence: Apple Intermediate Codec (which I used when capturing -- you have to with the Sony HVR), HDV 1080p24, HDV 1080i60, Apple Pro Res 422, H.264...
What's happening? Why is Final Cut turning my nice pristine captures into jagged foulness? What can I try that I haven't yet?

Welcome to the forums!
Unfortunately, you seem to have tried everything I can think of, and I don't have the latest versions of FCP to know if it is a bug. However, in the off chance that you haven't given this a shot:
Take a problematic 10 second section of your timeline (set in and out points) and the Export -> Quicktime (not QT Conversion) and make sure that you have it on Quality settings that you captured, and select the "Make Self Contained" box.
Look at that in Quicktime and see if it's bad. If it's not problematic, use that video file in Compressor for your render.
Hope that helps!
~Luke

Auto Quality Notification and Return Delivery Via Usage Decision

Hello Gurus
Need help !
I am using the Quality inspection with Material Specification.
Just an overview of my current system settings -
Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
My Requirement -
If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
Can someone pl help me with detailed steps for acheiving this...
Reqward points will be given immediatly for sharing thoughts
BR

Hi
Thanks for reply.
I think I missed some thing in my question
I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
OR
Any option to create Delivery Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
So I am aiming to get Delivery Document not material document as our materials are WM managed...
Could some one put some light on this...
BR

Save for Web does not remember quality settings

Hello,
I just about PSE8 today and Im on a mac with Leopard.
PSE does not remember the quality settings when "save for web".
The quality is 0 every time Im saving. Even if I change to 100 it does not remember it.
Can you help please? Im far from being an expert here.

function(){return A.apply(null,[this].concat($A(arguments)))}
However in my library-folder/preferences folder I found 5 folders or files which are connected to adobe.
"write and read" is activated on all and Im the main user on this mac.
There is even one file called "Adobe PSE für Web speichern 6.0 Vor" so pretty much like "save for web". On this one I can write and read as well.
On Windows, there is a preferences file that is stored in the proper location for such files:
C:\Users\Ellis\AppData\Roaming\Adobe\Save For Web PSE\4.0\Adobe Save For Web PSE 4.0 Prefs
PSE has no problem writing that file. This sounds similar to the file you found.
However, there is another file that Save For Web tries to write:
C:\Program Files\Adobe\Photoshop Elements 6.0\Settings\Recently Used Optimizations.irs
It is this file that is located improperly, in Program Files, which is supposed to be only for read-only executables (.exe), dynamic link libraries (.dll), and other read-only assets live. Programs normally don't have write permissions for these folders, so Save For Web fails to save its preferences. Perhaps there is something similar on the Mac. (I'm not an OS X expert, so I can't help with the Mac conventions of where things are kept.)

I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John

Unable to reach Adobe servers, Please check firewall settings and try again

I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
I do not have any firewalls on my network.
I've uninstalled all previous versions of the applications.
The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.

I'm having the exact same problem. Photoshop is stuck at 0%.
Have the links for direct download changed? When I went to http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
Photoshop CC 2014 (64-bit)
740 MB
File 2
801 MB
File 1
and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server."

Quality settings and I-Link Philips / SONY

Similar Messages

Maybe you are looking for