Quantity based condition type for excise duty calculation in tax procedure

Hi,
If any one has worked on the issue of excise duty calculation on Quantity of items purchased Quantity based condition type.
[For a formula based calculation procedure TAXAU]
Example : If quantity purchased = 10 units
Duty to be calculated @ Rs.3 per unit
Duty on the 10 units = Rs.30
Other than SAP Note 816835 any help is appreciable.
Thanks a lot,
Uma
Message was edited by: Uma

I could not find this condition type/Tcode in our client system.
Even we are on 4.6c.
Thanks,
Message was edited by: Uma

Similar Messages

Condition type for Excise Duty

Dear All,
I have to maintain a new condition type for excise duty @ 10.3%, at present the excise duty is non deductible and the CIN is not activated and not used.
It should also have the option to manually input the tax value at the time of creating a PO.
Kindly Help...
Regards,
Prashant

Thanks for your reply SNB..
Excise duty non deductible means that they have not defined any condition type for Excise and its totally new
Yes, its through tax code and the tax procedures are to be used.
The client has only provided the rates i.e, 10.3% and a g/l account for Excise in which this amount should get posted to automatically.
Kindly Suggest..
Regrds

Condition type for Excise

can anyone tell me what is the condition type i should maintain for AED SED Cess, EDcess
Pls guide me in configuring Pricing procedure

Hi,
If you don't mind can you please based on the following manner what are the condition types i have to consider in standard SAP
My pricing procedure is like this
gross price + excise % ( BEDAEDCESS+Edu.CESS)
for Gross Price i took in standard SAP : PB00
My doubt is what is the condition type for BED : ?
                                                           AED : ?
                                                           CESS : ?
                                                          Edu.CESS : ?
Because i am new to CIN
Please guide me based on the above inputs
Regards,
Sachin

Enhancement option for excise duty calculation program - /BEV2/EDMSESES

Hi,
My requirement is to enhance the excise duty calculation program /BEV2/EDMSESES. I searched the user exit using the package /BEV2/ED, but was not able find any user exit. So can you please help me how to enhance this standard program.
Thanks in advance,
Sudhanva

Hi,
My requirement is to enhance the excise duty calculation program /BEV2/EDMSESES. I searched the user exit using the package /BEV2/ED, but was not able find any user exit. So can you please help me how to enhance this standard program.
Thanks in advance,
Sudhanva

VK11 Condition types for taxes

Hey, I'm attaching the print screen of Vk11 for taxes. I don't understand what is the use of taxcode(highlighted) on the image. I have seen F1, but it doesn't make any sense to me.... I'm putting the tax rate % in the amount field... What is the use of Region? Is it the region of a customer? Any help is appreciated.
Thanks

Aasish, Thanks for the reply. In the Taxes on Purchases/Sales, I have configured 2 tax codes (O1 & O2). O1 has taxes Excise duty, Cess & VAT, whereas O2 has Excise, Cess & CST).
Now configuring condition type for tax VAT using VK11 using key combination Plan/Region/Delivery PLant REgion/ etc, I have entered the tax code as O1.
What is Tax code acting as here? I know it is not retrieving any tax rates mentioned in Taxes on Sales/Purhases section as I have maintained same Account Keys in both the areas but condition types are different....
If I am defining condition type for Excise, what is the tax code I have mention here.. Will it be O1 or O2?
Thanks

Pricing: Condition type for advance "ZADV" can be enterted twice

Hello,
I have defined condition type for advance as ZADV in pricing procedure.
Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
Regards
Suvin.S

HI,
Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
1*.Suppose Condition type ZADV having Condition Class "Discount or Surcharge " system will allow to enter manually second time also*
2. Suppose Condition Type ZADV is mandatory to few customer and also customers then do the some changes in the condition Type under the Tab "Changes which Can be made " we can find out the Manual Entries fields in that try to mentioned "D - Not possible to process manually "
Regards,
Prasanna
Edited by: prasanna_sap on Sep 6, 2011 8:35 AM

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

TAXINN SD For Excise Duty where to maintain TAX CODE in condition record?

is Tax code necessary for excise determination in TAXINN in SD Scenario? While maintaining condition record ( JEXP) for Excise access sequence JEXC doesnu2019t has Tax Code field Whereas for Sale Tax determination ( JCST/JLST) access sequence JLST /CST which has Tax code field . (In TAXINN we create Dummy tax code (blank))
is it true whatever I have written ? If yes then what is use of tax code where it triggers in FI Posting? Why we use only for Sale Tax not for Excise duty?
If u go to SAP Std condition type & access sequence provide for CIN in SD (TAXINN) While maintaining condition record ( JEXP) for Excise. Access sequence JEXC doesnu2019t has Tax Code field . do u think we should modify that create field for Tax code ..... Pl check in system & answer the question .......I hope u understand what i want to ask.

Hi,
As per my knowledge, Excise is not Tax its a Duty....
Excise gets added to your base price and the tax is calculated on the whole amount and not only the basic price.
Say if u r manufacturing a material and u r under excise regulations, then without paying excise duty you can't move the goods out of your premises, Here even before you sell the material to a customer the excise duty is paid from you. But when u will be selling the material to a customer, the customer is charged the excise duty which gets added to the net value and then the sales tax is calculated.
If u see a sale order condition tab page, there are two fields
1. Net Value 2. Tax
Net value is the value which includes the excise duty and the tax is only the CST/LST/VAT.
Regards

Wrong calculation for condition type for misc. provision in service PO

Hi Gurus,
In service PO line item, we have maintained customised condition type for misc provision. this is % based on net price. It has been assigned account key and accrual key. It's manual. Logically, it should calculate the value based on the total of the net values of all service lines and post a single entry for all concerned service lines. What system is actually doing, it calculates the value correctly for total of net values of service lines in that PO line item but post it to the account as many number of times as the number of service lines in that line item.
This is when service based IV is active for the PO line item. If I deactivate this, then it post the account once only which is ok.
Please explain this behaviour. Also, I want to activate service based IV, what should I do to this condition type. Is there any condtion base formula or condtion value formual to be assigned in the pricing procedure?
Thanks in advance,
Sudhir Dahake

Hi,
Check if some user exit/ routine is written for the condition type.
Check user exit RV60AFZZ, RV60AFZA, RV60AFZB,RV60AFZC for some code.
If it is a manual condition check COPY CONTROLS or if it is automatic check condition records from which it is calculated based on qty, price, material type, etc.
Regards,
Amit

There are similar condition for excise duty cess and taxations so which one

there are similar condition for excise duty cess and taxations so which one to be chosed
its so confusing there are many condition in excise duty and many condition for cess
there are also many condition for sales tax vat and others
so which one to be choose
can any body help me...
thanks with regards

Hi,
Which Tax procedure u r following,TAXINJ or TAXINN.
If U are Using TAXINJ.
ED
JMOD IN A/R BED
JAED IN: A/R AED
JSED IN A/R SED
JCES IN A/R CESS
JEX2 Excise Duty @ 16%(Set off)
JEXA IN A/R AED (Set off)
JEXS IN A/R SED (Set off)
JCED IN A/R CESS
JECS A/R EducationCess
JECX Ed. Cess @ 2% on ED(Set off)
JA1X A/R Sec & Hr ECS
JA1Y A/R Sec & Hr ECS
Tax
JIN1 CST
JIN2 VAT
Raghu

Condition type before CST/VAT calculation

Dear Friends ,
Is it possible to create a condition type which will get added only after excise duty calculation but before CST calculation.
If its possible kindly tell me how to go about it.
Regards,
DGN

Hi,
you will have to add an additional condition type in TAXINN procedure as "Freight Before Vat" , mantain it as statistical as it is only for calculation. and mantain FV11 for the same.
Further The same freight amount will also have to be entered in the PO pricing Procedure for Inventorization , payment etc.
first you have to make a tax condition type , make 2 , one as Value adn other percentage based. assign it to your tax procedure in steps which are before subtotaos: "Total excsie duty +cess" and "base for sales tax" , make sure to change the "to" part of base for sales tax .also make sure to tick these new conditions as statistical .Mantain FV11 for the Freight conditions.
The above config will only help you in calculating Correct Vat , this has nothing to do with PO pricing procedure. Freight will have to be entered in PO Pricing procedure normally as well.
Regards,
Vikas

Condition type for Amortisation cost

Dear friends,
I hve created condition type for amortisation cost in pricing.
It is adding the value for the gross price+ amortisation cost and flowing it to calculation of excise Duty in BASB.
For ex.
P001 - 1000
ZDIE - 100
so BASB - 1100
Excise Duties are calculated on 1100...That is also OK
But when the calculation of CST- As per system it is calculated on 1100 (BASB)....
And here client requirment is to calculate on P001(Gross Price).
Again calculation of
A/P Price + ED + VAT it is taking A/P Price as 1100.
Our requirement is to take it P001 as 1000.
How to take amortization cost to be considered only for the calculation of excise duties and rest calculation in tax procedure being considered on Gross Price.......
Plz. suggest
Thanks in Advance,
navin

I hope you have searched regarding the topic.
Refer following SDN wiki link for all your anwers:
- [ EK01/EK02/VPRS |http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS,+EK01(ActualCost)andEK02(Calculated+Cost)]
Regards
JP

Excise duty calculation on Assessable value in PO

Dear Team,
We are facing critical issue in Excise Duty calculation, Excise is calculating on basic price for our normal procurement and we are selling the same at MRP cost... Now the issue is Excise Duty has to be calculated on Assessable value (65% on MRP value) instead of basic price in PO.
Example:
Basic Price - 100
MRP - 300
Assessable value - 195
Excise Duty - 24.10 (195*12.36%)
Regards,
Sai

Hi Sai,
Sorry for the late reply. I think you are close to the solution. You should not change the Procedure too much.
MRP and Abatement condition types should be kept independent of calculations in the procedure. It is only for changing the base price already got for BED(JMOP) making use of the routine. If that is the case you will get base price (BASB) added to Excise duties which are modified for calculation of VAT.
For Eg:
10 BASB
30 ZMRP(Independent condition type used to store MRP value)
40 ZABA(Independent condition typeused to store Abatement %)
70 JMOP From 10(Routine XXX which will change the base value for calculating JMOP with a formula MRP*Abatement %)
270 ZVAT(As usual will calculate from BASB+Excise duties)
Hope this is the way you have done this. Steps 30, and 40 should not come in any "From -to"steps.
This is working well with one of our clients.
Regards
Binoy

Base value for excise duty

Hello All,
Base value for Excise duty and different service tax. calculated with the BASB condition type.
can we change the the base value pick up method.
Means i dont want to pick this value fron Net (gross price less discount).
I want to have this value from Calculated Net value with considering freight charge and less discount.
is it possible to change,
Abhinay Waikar.

Hi,
Assign subtotal "5" against the freight condition types in MM calculation schema and then try.

New Condition type for pricing

Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??

Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong

Quantity based condition type for excise duty calculation in tax procedure

Similar Messages

Maybe you are looking for