Quantity conversion not happening at times

Hi all,
I have an issue with Quantity Conversion.The BAse UoM is in Pieces (PC). It works perfectly sometimes and at times when the report is run with Alternate UoM as CS/ KG or TO, it gives the report output in PC only.
This is how the conversion is defined:
1. For material, 0MATERIAL info object is used with 0BASE_UOM and a DSO has been created automatically (in BEx Tab). The data has been loaded for all materials in this DSO
2. A unit conversion type is created in RSUOM. There is no authorization for this tcode. hence cant give more deatils on the definition here.
3. The variable for Alternate UoM used in the query selection screen is built on 0BASE_UOM
4. In the KPI's that use this property, in the conversion tab: the Conversion type is listed AND Target Unit = From Variable
My question is why does the query behave randomly. Why is that the conversion happens properly sometimes and at times it gives the output in Base UoM. Please advice.

Hi,
Can you give some examples of the cases in which the conversion works perfectly, and in which the conversion does not work perfectly?
Another question: is it that the conversion works fine for some specific materials, and for other materials the conversion goes haywire?
Regards,
Suhas

Similar Messages

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time.How can I recover this data

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time. How can I recover my documents?

If you never saved, auto save does not kick in.
Peter

Partial quantity confirmation not happening in BAPI_SALESORDER_CREATEFROMDA

Hi,
    I am using bapi BAPI_SALESORDER_CREATEFROMDAT2 to create sales order.
1)Suppose my order quantity is 5 and my ATP quantity is 3 , The partial confirmation is not happening.
2)However if my order quantity is 3 and my ATP quantity is 3 , Confirmation is happening.
However when i manually create sales order for scenario 1 confirmation is happening for 3 quantity out of 5.
Pls let me know if i am missing any setting.
With Regards
Tausif Shaikh

Hello,
      ORDER_ITEMS_IN-PLANT      = TAB-PLANT.
      ORDER_ITEMS_IN-STORE_LOC = TAB-STORE_LOC.
      ORDER_ITEMS_IN-TARGET_QTY = TAB-TARGET_QTY.
      APPEND ORDER_ITEMS_IN.
      ORDER_SCHEDULES_IN-ITM_NUMBER = TAB-ITM_NUMBER.
      ORDER_SCHEDULES_IN-REQ_QTY = TAB-TARGET_QTY.
      APPEND ORDER_SCHEDULES_IN.
Regards
Waza

On financial site which worked perfectly in IE for many years, I get immediate timeout error after entering my ID and password. Does not happen every time and multiple retries do not work.

I have used the PrimeVest web site to keep track of my IRA for several years now. For most of that time I have used Internet Explorer and have had no trouble. I have a link to that site pasted onto an Excel spread sheet and I click on that link daily to get my present balance. I have been doing it this way for years and have had no trouble while using Internet Explorer.
I recently installed the Firefox browser on my new laptop and have switched to using it as my default browser. When I click on that link now and enter my account number and password, sometimes it works OK in Firefox and sometimes it gives me a message saying "Your session has timed out. Please Log In Again." I have tried multiple times to re-enter the account number and password but always get the same message. Closing Firefox and reopening it produces the same result. I have even tried shutting the computer completely down and restarting it, but I got the same result. I can not find any pattern or reason to the days when I can use Firefox and the ones when I can not. The only way I have been able to log on to this site on those days is to past the link into Internet Explorer.
I do the same thing with several other financial sites and have not had any trouble with them and Firefox.

Thanks for the response.
I attempted to remove cookies, but I can not identify any of the cookies on the list with the PrimeVest web site. No PrimeVest, no PVs, nothing that looks like it came from them.
I have also reported the problem to PrimeVest and their tech did answer. He suggested erasing the browsing history (temporary internet files), which I did with no effect. He also had me check for the correct starting page address, which was OK. He stated that they are aware of a problem and it is on their list. No indication of how far down that list though. His only cure was to use IE for now, which I was already doing. Perhaps he can tell me which cookies to remove.

Photoshop CC freezes on startup and has to be force quit, started as a occasional issue not happens every time.

The mac is running os 10.9.5 its a 2007 2Ghz intel core 2 due with 4GB of ram.
The issues would happen 2-3 times but after force quitting and starting it back up it would eventually work as per normal. now it does it every time without fail. I have tried removing the app and re installing it.
thanks in advance for the help.

After uninstalling, you need to run the cleaner
Uninstall... run the Cleaner... Restart your computer... Reinstall
-using the cleaner after uninstalling and before reinstalling may help
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Automatic Output generation on order not happening all times

Hi Gurus,
We have maintained printer id and marked the print immediately box in the default settings of user parameters (SU10D). With this settings, the output should be created automatically at the time of saving the order.
In some cases, however, we are not having an automatic output inspite of the user parameters being maintained.
Can any one pl suggest if there is anything else to be verified?
Thanks in advance
KatVas

Hi,
The existing set up is like this:
1) V V13 record for sales doc type /sales org combination is maintained with the print immediately activated. The output device is not assigned here.
2) In user parameters (SU01d), the user has a default printer with print immediately activated.
In such case when the particular user creates the sales doc, the out put gets created at time of doc save, with the printer defaulted in user's parameters.
In some cases the output is not getting generated automatically..which is the problem.
Do we need to check any other settings?
Thanks a lot
Katvas

Sales contract currency conversion not happening

Hi,
we have sales contract we have maintain all the fx rates in system however when i see condtion system is not calculating the from RUB4 to USD the condtion type is fixed and it's giving the blank value.
for other currencies it's calculating correct.
Regards,
Raman

HI
Check this notes from SAP help.
With a variable time reference, you can choose:
■ Standard InfoObject (standard time characteristic: 0FISCYEAR, 0FISCPER, 0CALYEAR, 0CALQUARTER, 0CALMONTH, 0CALWEEK or 0CALDAY), which is used to determine the time of the translation
■ Special InfoObject. This special InfoObject has to have the same properties as the standard InfoObject or it has to reference the standard InfoObject. The aforementioned notes on using InfoSets also apply here.
Thanks
Raghu

IS-Oil: Quantity Conversion

Dear All,
Need your help.
My user maintained quantity conversion in the material master (MM02) as
below:-
1 MT = 1,026 L30
Then he created sales order and delivery order. But in the delivery
order, the quantity conversion not as expected. In delivery order, the
conversion shows that 1 MT = 1,026 L30 but for 26.316 MT, the system
converted the quantity to 27,321.187 L30 (1 MT = 1,038 L30) which is
wrong. How to correct the calculation?.
Thank you.

Dear Norhayati,
if I understand your initial question correctly, you want to understand how the dynamic quantity conversion is working in your system, which means for example how the system calculates a mass or weight if a volume at a specified observed temperature is entered, where you give your example in MT and L30.
The answer is not that simple. The SAP QCI is basically an open interface, where you configure in your project the quantity conversion, and where you integrate expert software from SAP partner companies for bulk quantity calculations.
This should always be done following a defined project methodology.
There are many calculation models defined globally.
The SAP QCI does not follow a specific model, and, if not configured at all but just used "as delivered" follows basically a modified DIN 51650 calculation model, without the rounding of quantity values specified in that standard. You can purchase standard document DIN 51650 at http://www.beuth.de .
DIN 51650 u201CTesting of mineral oils and related products u2013 determination of quantityu201D - DIN stands for "Deutsches Institut für Normung", which is the German Institute for Standarization.
QuantityWare, which is a company that develops SAP certified oil & gas conversion products, supports many possible conversion models, which are described here:
http://www.quantityware.com/_data/QuantityWare_MQCI_SP11.pdf
This document also describes the main steps for the dynamic quantity conversion of oil products.
In your case, it is first important to know whether MT stands for mass or weight, and which volume correction standard your system is configured to use, which includes also the version of that standard.
The standard SAP QCI again does only support - via the air buoyancy indicator concept - the DIN 51757 weight correction formula. Standard ASTM D1250-80 on the other hand defines several "tables" how to convert a density (in vaccum) to a density in air, which is then utilized to calculate weights. This standard part is currently being revised by the API/ASTM.
Thus in any project, it is important to define the relevant standards for Volume corrections (temperature and pressure dependant) as well as the weight and mass conversion standards. Rounding of UoM quantities is also important.
I hope this helps a little for a start,
Kind regards,
Markus

Quantity Conversion in Portal

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Euro conversion is not happening in Excise invoice

Dear SAP Gurus,
When I am creating excise invoice for export order, the conversion maintained in OB08 for USD is happening in INR but the same is not happening for EURO. The EURO conversion is also maintained in OB08.
When I am creating Sales order, the warning message is coming that 'Pricing/euro: Attention: Euro Customizing not maintained'.
Kindly help me to sort out this problem.
With Warm and Kind Regards
BHIKSHAPATHI

Hi
go to transaction cose EWCF and select Confirm euro currency Customizing and execute.
hope this will solve ur problem.
do revert
regards
chander

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do?

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do? The files seem to be there but I don't know if they are being backed up to cloud.

Hi, DickmoAZ.
Thank you for visiting Apple Support Communities.
This sounds like a permission issue most likely with the iTunes Media folder. Here is an article that will help you troubleshoot this issue.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Cheers,
Jason H.

PR to PO conversion should not happen in case of expired pricing condition in Info Record

Hi All,
Issue – PR to PO conversion should not happen in case of expired pricing condition in Info Record.
In case of creation of PR/ PO, the Price is pulled out from the Info Record of the material. In our case if the Price in the Info Record is expired, it should give the Error Message & should pick the Price from the last PO created for the same combination of Plant, Vendor, Company code.
Request you to please let us know if there is any way out.
Regards,
Karthick.V

Hi,
As per your requirement if info record price is not valid and in auto PO creation from PR, price should get picked from last PO, this is standard behavior and it will happen.
If you check in customization MM - Purchasing - Environment Data - Define Default Values for Buyers -Settings for default values
Default values if you check under price adoption , it has to be Always copy ( copying of conditions from last PO) . Pls check

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Quantity conversion not happening at times

Similar Messages

Maybe you are looking for