Partial quantity confirmation not happening in BAPI_SALESORDER_CREATEFROMDA

Hi,
I am using bapi BAPI_SALESORDER_CREATEFROMDAT2 to create sales order.
1)Suppose my order quantity is 5 and my ATP quantity is 3 , The partial confirmation is not happening.
2)However if my order quantity is 3 and my ATP quantity is 3 , Confirmation is happening.
However when i manually create sales order for scenario 1 confirmation is happening for 3 quantity out of 5.
Pls let me know if i am missing any setting.
With Regards
Tausif Shaikh

Hello,
      ORDER_ITEMS_IN-PLANT      = TAB-PLANT.
      ORDER_ITEMS_IN-STORE_LOC = TAB-STORE_LOC.
      ORDER_ITEMS_IN-TARGET_QTY = TAB-TARGET_QTY.
      APPEND ORDER_ITEMS_IN.
      ORDER_SCHEDULES_IN-ITM_NUMBER = TAB-ITM_NUMBER.
      ORDER_SCHEDULES_IN-REQ_QTY = TAB-TARGET_QTY.
      APPEND ORDER_SCHEDULES_IN.
Regards
Waza

Similar Messages

Quantity conversion not happening at times

Hi all,
I have an issue with Quantity Conversion.The BAse UoM is in Pieces (PC). It works perfectly sometimes and at times when the report is run with Alternate UoM as CS/ KG or TO, it gives the report output in PC only.
This is how the conversion is defined:
1. For material, 0MATERIAL info object is used with 0BASE_UOM and a DSO has been created automatically (in BEx Tab). The data has been loaded for all materials in this DSO
2. A unit conversion type is created in RSUOM. There is no authorization for this tcode. hence cant give more deatils on the definition here.
3. The variable for Alternate UoM used in the query selection screen is built on 0BASE_UOM
4. In the KPI's that use this property, in the conversion tab: the Conversion type is listed AND Target Unit = From Variable
My question is why does the query behave randomly. Why is that the conversion happens properly sometimes and at times it gives the output in Base UoM. Please advice.

Hi,
Can you give some examples of the cases in which the conversion works perfectly, and in which the conversion does not work perfectly?
Another question: is it that the conversion works fine for some specific materials, and for other materials the conversion goes haywire?
Regards,
Suhas

Automatic goods issue when the activity is confirmed not happening

Dear all,
I am facing one issue. I have attached a backflush item to the activity. The stock is also available for that material. But when i do the activity confirmation that material is not getting issued automatically.
Can anybody tell me what could be the reason.
Regards,
Sudhir Kesarkar

Thanks jibat,
As you suhggested i have checked in cogi. The error appearing there is 'Maintain valuation type'. This occured because the material is split valuated and we have to maintain the valuation type. But is there any way to automatically flow valuation type to the material attached to the activity.
Regards,
Sudhir

Quantity confirmed in sales order change mode not in display mode !!!

Dear All !!
We have a problem in sales order .
In sales order the line item 580 quantity confirmed 15 pc in change mode VA02 if I open the sales order in display mode VA03 the quantity confirmed “0”
More details refer the attachment .
Kindly advise why the system behaving like this and suggest how to control.
Thanks in advance.
Best Regards,
Rampe

Dear All !!
The issue has been sort it out .
Reason for cause : The Problem happened due to wrong material master data defined in material master.
The material has been changed and marked "as configurable material" in material view "Basic Data 2".Even though the material is not configurable. So we have forced correct value in material master and open the sales order with VA02 and then saved in order to redetermine correct master data. Then the problem got resolved.
Thanks for your Help.
Best Regards
Rampe

Partial Quantity and Line item not showing in MIGO

HI All,
My User create STO and after save it is automatically created OBD and PGI through BARCODE now problem is at the time MIGO it is take partially quantity.when i going to do manually rest quantity it is not showing all line items.
Issue 1. It is showing only one line item instead of two line item Qty.
2. When i am going to select purchaseorder at migo instead of OBD its showing two line item.
Please suggest what to do.

HI Please check i am sending screen shot

Delivery quantity should not exceed order or confirm quantity

Dear Friends,
How to handle a below scenario,
Sales order is for 100 Tons.Partial delivery is allowed.
Now delivery quantity should be equal to 100 Tons.Delivery quantity should not exceed order quantity.
I mean delivery quantity must be equal to order quantity.
Thanks in advance.
Regards,
Shrikant

Dear Ram/Ramnath,
I have maintained the B for Check Overdelivery.Transaction code used is 0vlp.Item catg is TAN
Check Quantity 0 is A
Check Minimum Quantity is A
Now I ahve created a Sales Order for 10 Tons.
Created two delivery notes of 4 tons and 8 tons respectively.
While creating second delivery for 8 tons I do not get any error message.
Transaction code VOV7.Here completion rule is blank as it is relevant for Quotation and contracts.
Is there anything need to do?
Thanks in advance.
Regards,
Shrikant

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

Ordre quantity is not confirming even stock available

Hi Gurus,
I have automatic batch determination configured. In sales order order quantity is not confirming even if there is stock available in batch. I have checked in mmbe stock is available for batch in unrestricted use. What will be the cause that order quantity is not confirming.
Regards
Yogesh

Hi Madhukar,
Please use availability check field in the material master in Sales view as " Batch managed" and also check the material for other Batch mgmt checks and this works properly.
Please let me know your thoughts.
Thanks and Regards,
Satheesh Durgi

Partial Confirmation not working through Backorder Processing in GATP

Dear SAP Folks,
We are having issue with our Backorder Processing in APO.
During backorder processing we have seen (in BOP Spool) orders are getting picked for
processing but despite availability of Allocations and inventory, orders are remaining unconfirmed which could have been partially confirmed.
Order which can be partially confirmed, BOP doesnt do partial confirmation. For Example - If SO is for 100 pieces and
can be confirmed for only 60 pieces, ideally BOP should confirmed 60, but it doesnt.
But same sales order can be confirmed by doing manual online ATP Check in Sales Order.
BOP only confirms the orders when it can be fully confirmed, not partial confirmation thru BOP.
This is very strange, ideally BOP should confirm those orders, but its not doing it.
Please help.
Thanks
Satish

Dear SAP Experts,
We tried the suggested solution to OVZJ setting = 'E'. This soulution is not working properly - results are inconsistent. Meaning with these setting BOP confirmed orders partially, with the rerun of same BOP job on same orders it didnt confirm the orders partially, orders were kept unchanged. We tried this activity multiple times, but results are inconsistent.
But online ATP check can always confirms those orders partially, without any issues there.
Also please provide details about impact of this change for OVZJ setting= 'E', to any other processes in ERP system.
Please help
Thanks
Satish
Edited by: SatishW on Mar 17, 2010 10:05 PM

MIRO Not Allowing Partial Quantity To Be Invoiced

In MIRO a user can enter 313.00kg or 314.00kg as the invoiced quantity, but not 313.60kg as is on the paper invoice we received. The system gives the error message: "order price quantity cannot be determined automatically."
How can I go about solving this. Thanks - points will be rewarded.

Dear,
Let me know, Any good receipt or service entry sheet created for material because if you have create service entry sheet or good receipt for material so system take reference of good receipt material quantity and if you give manualy quantity for material in miro so system give "quantity mismatch error"
If any other problem please explan me.
If it is useful please revert back.
Regards,
Mahesh Wagh

System is not receiving partial quantity in MIGO.

Hi Everyone
During receiving the partial quantity in MIGo,system gives me following error.
Deficit of PU Ordered quantity 5 BAG : 2000380 1000 1002 GREEN TIP
Can u please tell me to get rid of this error so that the system could receive the partial quantity against PO in MIGo
Regards:Vijay

Hi,
Check on it:-
partial gr quantity can be cancelled or reversed
SAP MIGO Partial Goods Receipt of a PO then after close PO
pherasath

Mile stone billing with partial quantity.

Hi,
We are facing problem in the milestone billing. we have scenario where we have payment terms (Ex: 10% advance, 70% on delivery, 10% on installation and remaining 10% on completion) with the materials having multiple quantity. Delivery will be in partial, so except the advance invoice all the remaining invoice require change in the billing quantity before billing, but in the system billing quantity showing in gray mode. After delivery also remaining (10% installation) also will be on different quantity i.e. actually installed at the site.
As per the law invoicing has to be done with in the 14 days of the installation of the work, once the installation over for partial quantity we required to do the invoice irrespective of the delivered quantity.
In the system if we do the invoice for the total quantity at the time advance after that we are unable to change the invoice quantity in the subsequent invoices.
Please suggest us how to make enable the billing quantity field in case of milestone billing.
Ex: let us say sales order is created for qty 10 with the value of 1,00,000.00 as payment terms as follows.
10% Advance, 70% on delivery, 10% on installation, 10% final completion.
First we have raised the 10% advance invoice using 1st milestone with the total quantity.
When we deliver, we deliver only partial quantity i.e. qty. 5, so we have to create the invoice for (50,000-5,000) Rs 45,000. But when we create the second invoice we are unable to change the billing quantity. Same way when we create the third invoice after installation we may have to bill for qty. 3 if only 3 machines are installed out of 5 delivered, so again we require the quantity change.
Regards,
Upendra
+919824795543

hi
Milestone billing means distributing the total amount to be billed over multiple billing dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the individual milestones.
IMG configuration requires :-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and construction projects. Such projects often include a series of milestones that mark the completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the basis of the requested delivery quantity and not on the total of the confirmed quantities.
Reward if USeful
Thanx & Rerards.
Naren..

Partial Delivery should not go for credit hold.

Hi All,
When we are creating Partial delivery it is going on credit hold. I want the solution for this so that credit check does not happen at Delivery level.
Please find the OVA8 settings Mentained below.
Check                   Reaction      Status/Block
Dynamic                   C                 Checked               Horizon   15 T
NextReviewDate         A                 Checked              Number of Days      30
Open Item                 C                 Checked              Max.Open.tem %    10   NoDays openI   15
OldestOpenitem         A                 Checked              Days oldestItem     120
Please suggest for the same.
Thanks

Hi,
Partial delivery is a exclusion scenario. For this, we have to use credit check user exits. Detailed documentation of the user exit for credit managment is given below. This will help you to achieve solution.
We can write logic based on VBAP & LIPS table delivered quantity details.
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check
Regards,
Shabeer

Partial quantity in J1IG(depot invoice)

Hi All,
I have a requirement where clients want to pass duty for partial quantity from GR. Kindly let me know if we can process partial quantity. If yes will RG23D register updates that quantity.
I tried doing the same but i got an error "Qty check failed for item 0001. Enter qty equal to GR qty in More docs".
In challan quantity if i put say 50 quantity out of 100 its giving above error.
A strange scenario is happening there. The UOM is taking as ST in challan quantity and PC in received quantity.
If I process with 50 ST it is taking and updating the register but not 50 PC.
Please guide me.
Thank You..

Hi,
Please you got the stock from Manufacturing plant to Depot (j1ig), system will show the invoices list in J1IJ (select the line item and click on Get Excise invoice)Push button and you have to select the invoices from the listand click on continue
Thanks.
Raviteja

GR with partial quantity

Hi Friends,
I have one small query to clarify,
I have done GR with PARTIAL quantity refer to PO using MIGO.
Initially vendor has not send me any confirmation and there is a shortage of material upon arrival.
Kindly let me know, how and where do I go and check to see remaining GR quantity that we are expecting .
thanks in advance.

Many thanks to both of you.
Sorry below mention is my another query..which i have put here by mistake.
Actually , I wanted to know what is the difference between...
Goods receipt with GR assignment
and
Goods receipt without GR assignment.
Thanks a lot in advance,
Cheers!
Edited by: sapsdtech on Aug 7, 2009 2:15 PM

Partial quantity confirmation not happening in BAPI_SALESORDER_CREATEFROMDA

Similar Messages

Maybe you are looking for