Queries on the web

All users by default run BEx queries. Web templates have not been defined. Can the users still run the queries on the web and if so how? Do they also have the option to save the query as a favorite? Thanks

hi Niten,
yes, there is button 'display query on web (shiftctrlw)' after V and X. you will get a URL like
http://server:port/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=infocubename&QUERY=xxx&VARIABLE_SCREEN=..&DUMMY=..
you should have your bw web-enabled.
it's running on browser, no option to save as favorite, but they can add in bex analyzer.
hope this helps.

Similar Messages

Manual refresh of queries in the Web

Hello,
in the web the default action following any change to the navigation state of the query-result is that an automatic refresh of the query is performed.
We want to enter a series of navigation-steps. It would be inefficient for the query
to automatically refresh each time a navigation-step was entered. Is it possible to halt the auto refresh from executing and instead switch to a manual refresh mode which means that the users can enter a series of navigation-steps and when they are ready, they simply press a refresh button?
Thanks in advance!
Regards,
Birgit.

Birgit,
options could be ..
1. Have the query automatically expand to a specific level for all queries...
2. Have a prequery window where the selection parameters are specified and then let the user enter the drilldown level for the query and then take the values from this template and then pass the same to the main query as URL parameters .. you can refer the Web API 3.x to find out how to do the same and also search for Command Line URLs.. this option would require some innovative javascript and command Line specifications..
Arun
Assign points if useful

Profile Parameter : Time out for executing query on the web

Hi gurus,
I am executing queries on the web directly. This can be done from query designer with the button that says "Execute query on web". The problem is that for queries that take more than 600 Secs to run, I get an Application timed out error. Queries that take less than this run smoothly.
Can anyone please tell me the profile parameter associated with this particular setting. It is not rdisp/max_wprun_time, I know for sure since the value for this profile parameter in my system is 9999. Please help.
Thanks & rgds,
Sree

Issue resolved.
Profile Paramter - icm/server_port_0
Current Value - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=600
Changed to - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=3600
rgds,
Sree

How to insert two queries in the same workbook in new BI 7.0 Bex web analy

Hi
Can you please advise how to insert multiple queries in the same workbook in BI 7.0 web analyser.
Sarah

Hi,
You need to switch to design mode (BEx Analyser Menu - Design Toolbar - Design Mode). For each query that you want to embed, insert an analysis grid item in the workbook. Link each analysis grid to its corresponding data provider (query).
Hope this helps.
Regards,
Rajkandula

General queries related to implementing the web service

Hi all,
I am new to web services, so I would like to get some of the queries solved which I am facing as of now.
- If in a function of web service, there are three parameters defined, in which one is input parameter while remaining others are output parameters, then from the client invoking that web service has to provide only the input parameter as an argument or all the three arguments should be provided?
Please let me know.
Thanks

I really can't say about the input / output parameters. My guess is that you can't really have ByRef output variables, because the web method call is marshalled into XML and you only get a reply in XML based on the return type of the web method. What I'm trying to say is: only use the method's return value to receive output. Create complex Objects that can be mapped to XML to do that.
The way to call the web service from java is to parse the WSDL document for the web service and see what kind of input messages the web service requires and what type of output messages it produces.
As far as I know there are two ways to parse the WSDL.
1) If you know the location of the WSDL during development you can use it as an input to tools like wsimport in order to create a Service Endpoint Interface.
2) If you only know the WSDL location during runtime, you have to parse the document either by DOM/SAX etc either by using libraries such as wsdl4j
http://sourceforge.net/projects/wsdl4j
I hope I've helped.

How to combine the same variables from 2 queries in one webi report

HI ALL,
I created two BW queries/universe and put them into one web intelligence report. Both queries have the same mandatory variable. I combined the relevant dimensions but can't find how to combine the two variables, which resulted in pop-up for 2 variables.
Any idea?

Hey Dick Zheng,
Just to close it,
Instead of working on existing reports.
Create new report(s) on top of these changed Universes(2).
1. New WebI report on top of Univ1 (With Prompt)
2. New WebI report on top of Univ2 (Without Prompt)
If both are working as expected. Do follow below:
1. Open any Report (just created in above steps)
2. Edit Query
3. Add Query
4. Select another Universe
5. Drag few objects
6. Run Queries
Now see it is working as expected or not.??
Still any issues post here...,,
Gracias...!!

Where are the web templetes, web items and queries stored?

Hi,
I have created many reports using Web Application Designer and Query Designer, Now I want to get these reports and querys in my webDypro program, so i think first i must find out where can i find them, anybody know which table store the web templetes ,web items and queries?

hi Jacky,
query
RSRREPDIR, RSZCOMPDIR
(other tables : RSRREPDIR, RSZRANGE, RSZELTXREF, RSZELTTXT, RSZSELECT, RSZCOMPDIR, RSZELTDIR
RSZCOMPIC, RSZELTPRIO, RSZELTPROP, RSZELTATTR, RSZELTTXT, RSZCALC, RSZCEL, RSZGLOBV)
webtemplates
RSZWTEMPLATE
web items
RSZWITEM Header Table for BW Web Items
RSZWMDITEM BW Web Metadata: Template Item
hope this helps.

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to create a verification pop-up message for queries executed on Web

I have implemented the function RRMS_MESSAGE_HANDLING in my customer exit variable code for step 2 in the customer include ZXRSRU01. I am able to get warning and error messages to appear in Bex Excel queries, but not queries executed on the Web. I have also tried implementing these queries in a Web Template which allows system messages and warning messages, but still these messages are suppressed.
Is anyone aware of how to create warning messages that appear both in Bex Excel and Bex Web queries?
Thanks for you help,
Curt Timmerman

On the Comments screen, just select the notes tool to add the note. When you are done, click to close the note.

Service desk: Hide links (queries) in the work center view

Hi,
we are using the service desk towards our customers.
Basically we have to sets of roles: one for consultants (ourselves) and one for our customers.
Our customers are entering the service desk through a web-interface.
If the consultants enters the web-interface, they can see reports and queries to the left, and they can open and edit tickets.
If the customers enters the web-interface, they cannot see queries and reports in the left navigation bar, and they can not open and edit tickets.
Now we need a third possibility:
A customer need to open and edit tickets, but they should not be allowed to define (or even execute) queries.
Because when they can define queries, they get access to see all other customers tickets. And that is not good.
How to obtain this?
Thanks a lot in advance.
/ peter

Based on your comments, I take it that you may not implementing a formal first level support who can perform these tasks as recommended by solman standard. If you are, your customer can request reassignment using their reply option, and the support tech performs the task. You can implement some sort of email notification process to inform the new BP.
Alternatively, I can suggest two modifications if you have a developer at your disposal:
1) in your solution manager system, clone the incident create web dynpro to ensure population of the required fields to the customer and to suit your requirement. Here you can also remove the SU15 text id checks.
2) in your satellite system, modify the function group which triggers the create incident process and have it launch the cloned web dynpro above.
My apologies, I don't have access to a solman system immediately to give you the exact object names for the above suggestions.
Cheers,
P

Currency Translation at the Web Template level (standard functionality)

Hi Experts ,
We are currently working in BI 7.0 env. with source system ECC 5.0.
We are working for a task where we need to make the BEx queries enabled for currency translation .
The requirement is :-
The user should be enable to give/opt/choose for the follwoing options:-
Currency type (target currency in which the translation is aimed)
Exchange Rate ( Standard(M) or other(P) or something else) and
Key date: The translation will be performed taking the exchange rate on that particular date.
We do have 2 option to perform the task...
1:- Either we do it thru currency translation type definition(RSCUR) and then attaching this currency translation for every amount key figure values at each query level. OR
2:- If we can go and find something at the Web Template level and add/modify the template in such a way so that it gives us the functionality to translate a source currency into a desired one with desired exchange rate type (currently either M or P) and for a specific date.
At this point of time when we do have numerous sub-areas holding hundreds of queries, we want something which should be available as the modification/addition to standard functionality at the web template level and not at the query level as changing each and every one of them and testing would be a cumbersome process and would be costly and risky at the same time. So we are just wondering if we can find something with option no. 2 and add/modify something in the standard functionality.
Please ask for any more information required.
Thanks very much.
regds.

Hi Amit,
You would still need to define the Currency Translation using RSCUR where you would specify
-the exchange rate type (either fixed or variable)
-the target currency (either fixed or variable)
-the reference date
You don't need to modify any of your queries. You can instead use 'Translate Currency'/[SET_CURRENCY_TRANSLATION] command in WAD & specify the Currency Translation as defined in RSCUR. If you want the target currency & exchange rate type to be driven by user input, you can define these as variables in RSCUR & invoke the variable screen using 'OPEN_VARIABLE_DIALOG' in WAD for user input just before calling 'SET_CURRENCY_TRANSLATION' command.
--Priya

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

How to embed multiple queries in one web template

Hi,
I've a requirement wherein I need to embed two queries in one web template. The first query displays order quantity from a particular customer and the second query displays other information for that customer. Most of my web templates i've contains only one query which i've created using 0ADHOC template saving this as diff template and modifying it. But this is the first time I have got this type of requirement wherein the user drills down on a particular customer for order quantity and then goes for other information from other query.
Does anyone out there has any idea or suggestion as to how to do this ? One more thing I need to pass the values from one query to another which is akin to RRI concept while staying in the same web template.
Your suggestions/advices are highly appreciated.
Thanks in Advance,
Rash.

Hi Rash,
You can do this by including 2 table web items in your template and assiging the 2 different queries as different dataproviders to each. You can try to create a drop down box to filter the customer and in its properties set DataProvider1 and DataProvider2 as the affected data targets.
Hope this helps...

BI 7.0 parallel processing of queries in a web application

Hi,
I'm currently having problems with a web application / web template with 10 data providers (different queries). When executing the web application the 10 queries are executed sequentially. Since each query takes about 30 sec., the complete execution time exceeds 300 seconds which is not satisfactory.
Is there any way to enable parallel processing?
Thanx in advance,
Patrick

Hello Patrick
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41c97a30-0901-0010-61a5-d7abc01410ee
/thread/351419 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/ff5186ad-0701-0010-1aa1-e11f4f3f2f68
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b79ba90-0201-0010-1b9a-fa13a8f38127
Thanks
Chandran

Queries related to web-ui configuration.

Hi Experts,
I have some queries related to web-ui configuration :
I have copied standard component of Lead with values Role Key = Zconfig key, Component Usage, Object Type, Object Subtype= Default and made some changes(renamed some fields) and assigned same Config key to business role further assigned that role to my user but when i open the lead transaction from webui the screen i see is standard and not which is configured by me, i have also confirmed screen by checking field property(F2) it shows my zconfig key, please clear my below queries:
1) I m missing any steps in screen configuration or assignment
2) I need to assign this new configured screen to diffrent users for diffrent project.
3) How to hide some field which is not required in transaction.
I have gone through the various threads in sdn but unfortunately i did not get clear idea.
Thanks and Regards,
DD's

Hi harshit,
Thanx for u r quick reply i have done it by making changes in DO_CONFIG_DETERMINATION, can u please suggest how to hide unwanted fields in webui transaction.
Thanks and Regards,
DD's
Edited by: DD's on May 11, 2009 11:51 AM

Queries on the web

Similar Messages

Maybe you are looking for