Queries with c6

hey, i got a new c6. i need to lock my phone with a security code, and i have set a code also. however when i lock, it does not ask for the code to unlock it. i need to know how to do it. in both the slider and touch screen variations.
and also when i acess a web page through my wfi, there seems's to be no full character support, what and how should i change the settings. thanks

Hi,
Thanks for the info.
As said in the thread, I am also convinced that in some cases FULL TABLE SCAN is better than INDEX. But in our particular query, the DBs in which plan is having index is executing in few seconds where as the db in which it's going for full table scan is taking hours to execute.
And the more interesting thing is the same query with NOT EXISTS is executing fastly and the plan is taking index also.(All environments).
So my doubt is why the query with NOT IN clause doesn't take index even if all the join columns are NOT NULL restricted.
Please find the plans below.
Plan Taking Index_
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
| 0 | SELECT STATEMENT | | 2 | 1152 | 18239 (1)|
| 1 | NESTED LOOPS ANTI | | 2 | 1152 | 18239 (1)|
|* 2 | TABLE ACCESS FULL | CH_ACCT_MAST | 1361 | 731K| 16877 (1)|
|* 3 | TABLE ACCESS BY INDEX ROWID| BA_ACCT_CRR_CODE | 2666 | 69316 | 1 (0)|
|* 4 | INDEX RANGE SCAN | BA_ACCT_CRR_CODE_1 | 1 | | 1 (0)|
Predicate Information (identified by operation id):
2 - filter("COD_LAST_MNT_MAKERID"='CONVMIDAS')
3 - filter("B"."COD_LAST_MNT_MAKERID"='CONVMIDAS')
4 - access("COD_ACCT_NO"="COD_ACCT_NO")
Plan Not Taking Index*
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 101K| 54M| 21648 (1)| 00:04:20 |
|* 1 | HASH JOIN RIGHT ANTI| | 101K| 54M| 21648 (1)| 00:04:20 |
|* 2 | TABLE ACCESS FULL | BA_ACCT_CRR_CODE | 1390 | 34750 | 2796 (1)| 00:00:34 |
|* 3 | TABLE ACCESS FULL | CH_ACCT_MAST | 103K| 53M| 18852 (1)| 00:03:47 |
Predicate Information (identified by operation id):
1 - access("COD_ACCT_NO"="COD_ACCT_NO")
2 - filter("B"."COD_LAST_MNT_MAKERID"='CONVMIDAS' AND "B"."COD_ACCT_NO" IS
NOT NULL)
3 - filter("COD_LAST_MNT_MAKERID"='CONVMIDAS' AND "A"."COD_ACCT_NO" IS NOT
NULL)
Regards,
Savad

Similar Messages

How to querie with bind variable in findMode?

Hallo,
is it possible to use a querie with bind variable in findMode? And when how is it possible to initialize the bind variable?
Any help is appreciated.

Hi,
bind variables can be linked from teh ADF binding to e.g. a managed bean, the sessionScope or other binding attributes via EL. So when you go into findMode and execute the query, the EL will grab the bindVariable values automatically.
Frank

Multiple queries with 1 connection

Can I execute multiple queries with one connection?
//Example -
<%
String firstconn;
Class.forName("org.gjt.mm.mysql.Driver");
// create connection string
firstconn = "jdbc:mysql://localhost/profile?user=mark&password=mstringham";
// pass database parameters to JDBC driver
Connection aConn = DriverManager.getConnection(firstconn);
// query statement
Statement firstSQLStatement = aConn.createStatement();
String firstquery = "UPDATE auth_users SET last_log='" + rightnow + "'WHERE name='" + username + "' ";
// get result code
int firstSQLStatus = firstSQLStatement.executeUpdate(firstquery);
// close connection
firstSQLStatement.close();
%>
Now, instead of building a new connection for each query, can I use the same connection info for another query?
if so - how do you do this?
thanks for any help.
Mark

Create multiple statement objects from your connection. It's a good idea to close these in a finally block after you're done with them
Connection conn = null;
Statement stmt1 = null;
Statement stmt2 = null;
try {
    conn = DriverManager.getConnection();
    stmt1 = conn.createStatement();
    // some sql here
    stmt2 = conn.createStatement();
    // some more sql here
} finally {
    if ( stmt1 != null ) stmt1.close();
    if ( stmt2 != null ) stmt2.close();

Create a VC Model for BEx queries with Cell Editor

Hello All,
I am trying to create a VC Model for BEx queries with Cell Editor.
BW Development Team has created a BEX query with complex restrictions and calculations using Cell Editor feature of BI-BEX.
The query output in BEx analyzer is correct where all values are being calculated at each Cell level and being displayed.
But, while creating VC model, system is not displaying the Cells.Thus, no VC Model can be created.
I have executed below steps:
1. Created a VC Model for BEx Query - ZQRY_XYZ
2. Create Iview -> Create a dataService -> Provide a Table from the Output
In the Column field system is not showing any of the Cells (present in Cell Editor)
Please help me to solve this issue.
Thanks,
Siva

Hi
If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
Regards
Sandeep

Creating ABAP queries with t-code SQ01 in SRM

Hi.
What tables are available for me to use ABAP queries with t-code in SRM as we currently use this for MM.
Please can someone tell me if a list of usefull tables for Carts, Approvals, PO are available in SRM as I cannot find these in SE11. We have no BW and need ABAP query for fullfilings any business requirements.
Thankyou.
Vijay.

Please search the documents in transaction BBP_PD. When you click the details it will give you the table details as well.
Additionally check this thread for details
good source for tables and reports
Regards
Kathirvel

Reconcile Inventory BI Content Queries with ECC

Hi Folks,
I have a question regarding reconciling Inventory Management BI Content reports based on cube 0IC_C03 with ECC.
We implemented IM in BI, and now try to reconcile the queries with ECC. Specifically, I have one query, 0IC_C03_Q0008 - Stock in Transit.
We ran the report by Plant, in BI, it only showed one material with #, but people from ECC side use T-Code MB5T in ECC and saw many materials with Stock in Transit for that Plant; and for the material showed on BI report, the # doesn't match between BI and ECC.
What is the right way to reconcile the report with ECC? is there any other report/Tcode in ECC we can use?
Any insight ideas would be much appreciated!
Thanks,
Freda

Hi Freda,
For me, it is the typical nightmare to try to reconcile the cube to your ECC transactions since the cube summarizes and doesn't include your material documents.
So, to make it a bit easier to match MB5T or MB51, add an ODS with a material document and Material item key and all of the fields and key figures necessary for reconciliation (I usually look at the datasource's delivered fields and add whatever sounds reasonable to look at). To fill records in this ODS, only fill them from 2LIS_03_BF, because BX and UM do not contain material documents.
While I was writting this, I think I realize what is happening in your situation. If memory serves me correctly, MB5T is Cross-Company SIT, which is not part of the 2LIS_03* datasources. They only account for Intra-Company (Plant-to-Plant within the same company code) SIT. For that, there is a White Paper you can have an ABAP'er implement for you.
Here are two good documents you should read and be familiar with:
How to .... Report on Cross Company Stock in Transit: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
How to .... Handle Inventory Management Scenarios in BW: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Also, when comparing my cube data to ECC/R/3, I use transaction MMBE in the ECC to identify stock quantities and stock in transit (SIT).
Brian

Slow response on data dictionary queries with optimizer_mode=rule in 10g

I have two dataabse: DB1 (9i) and DB2 (10g) on windows 2000
They are two development databases with the same schemas and same tables. The application executes the same commands but with different results and execution plans.
In DB2 the queries with the most slow response tima are the queries on the data dictionary (for example: all_synonyms).
These query are very fast with the optimizer_mode=cost and very slow with the optimizer_mode=rule.
And the the problem is this:
in DB1 and DB2 the application executes after the connection this command:
ALTER SESSION SET OPTIMIZER_MODE = 'RULE';
These are the traces of the session in db1 and db2:
The queries are created dynamically by the application.
Is there a solution for this?
thanks
Message was edited by:
user596611

Here is a simple example of what can happen,
@>alter session set optimizer_mode=all_rows;
@>SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
PLAN_TABLE_OUTPUT
| Id | Operation        | Name | Rows | Cost (%CPU)|
|   0 | SELECT STATEMENT |      |     1 |     2   (0)|
|   1 | FAST DUAL       |      |     1 |     2   (0)|
@>alter session set optimizer_mode=rule;
@>SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
PLAN_TABLE_OUTPUT
| Id | Operation        | Name |
|   0 | SELECT STATEMENT |      |
|   1 | FAST DUAL       |      |
Note
      - rule based optimizer used (consider using cbo)As you can see incomplete explain plans. Therefore it is not advised.
Adith

Report Designer - Summary page based on 3 queries with dynamic hierarchy?

Dear All,
I am trying to build a workbook based on 3 queries with a summary page that pulls in the query data into one page.
Each query is based on one key figure that is split by profit centre hierarchy.
i.e.
Turnover
-Profit Centre Node A
-Profit Centre Node B
-Profit Centre Node C
> Profit Centre C1
> Profit Centre C2
The user can dril-down into each query at whatever level of the PC Hierarchy they wish.
My issue is trying to structure a dynamic summary page that pulls in all rows from the individual queries regardless of the number of profit centre hierarchies contained in each. i.e. The summary could have 5 PCs for queries 1,2 & 3 in one execution, but then 10 for all queries in another execution.
Question:
Can report designer be used to make a dynamic summary sheet that will capture all rows from the individual query? or would an excel macro summary be the only way of doing this?

Hi Ingo,
After much testing and looking into trace etc. we have got this thing to behave as desired. Basically, following two things,
- no reference to CR Dynamic Hierarchy variable on report. There were places where this parameter was being refered and causing grief. We tested with brand new report.
- making sure that on query Cost center restriction is placed in Characteristic Restriction area of Filter tab of query, as oppose to default value area filter tab.
With above in place, the published report in infoview behave as desired, i.e. proper hierarchy structure in cost center prompt and group tree and only desired nodes showing on report.
Thank you for all you pointers
Regards
IMS

Queries with parameters - how do they get migrated?

We are evaluating this migration to move a client off of access and put them into oracle. We use APEX for other things and like it. So, we tried with 3 tables, one query and one report. The tables moved fine, but the query failed. The log showed:
Failed to Convert View <name> unexpected end of subtree: Line 0 Column 0.
I began removing things to determine what was causing it. I finally got it to run when I got rid of the functions like iif, int and val. I think these are causing the issue. But, I still couldn't create the view because of the parameter in the query. Access prompts the user for this value before the query is run, but how would this translate to an Oracle view? And how would the report prompt the user for this value in Apex? Does this convert over automatically?
If I have to rewrite the queries myself, I will. If I do, will that affect importing reports like this into Apex? Any suggestions?
Thanks, Chris

Hi Chris,
Thanks for the updates.
Currently the Oracle SQL Developer Migration Workbench translator does not support the parsing of the IIF function. I believe there is a bug already logged against this & a fix will be available in a future release of the Workbench.
You may find it useful to refer to the following threads discussing alternative handling of queries using the IIF function -
Access Queries with "IIF" function
msaccess parser error
As mentioned in the above postings, one option for you is to use a CASE statement, similar to the following:
SELECT SUM(case when Table1.Week Between 1 And Ending_Week then Table1.Sales else 0 end) TY_Sales_YTD
FROM Table1 ;
If you wished to use such a query to display the resulting value on an Oracle APEX page, this could be implemented as follows:
Note: Assuming that you have migrated the database schema to Oracle & have associated your APEX workspace with that schema.
1. Create a new blank page in your APEX application. Add a new HTML region to your page.
2. Create a "Select List with Submit" item and in its "List of Values Query" field enter syntax similar to the following:
select week d, week r
from table1
order by 1
and set the item name to P1_END_WK. Place the item on your HTML region. This item will act as the parameter in your query.
3. Create a "Display as Text" item and set its Source region to be of type "SQL Query". Paste the following syntax into the items' source value field:
SELECT SUM(case when Table1.Week Between 1 And :P1_END_WK then Table1.Sales else 0 end) TY_Sales_YTD
FROM Table1
and set the item name to P1_SUM. Place the item on your HTML region. This query will return the result based upon the user's selection of value in the P1_END_WK select list item.
4. Add a branch to the page, setting it to branch to itself. Basically when the user selects a value from the P1_END_WK select list, this will submit the page. The branch will redirect the page to itself & in turn update the value held in P1_SUM.
Would this type of implementation work for your application? It's obviously just one option to consider. I hope this helps. If you have any further issues/questions regarding any of the above information or regarding other queries in your MS Access MDB file, please let me know. If you'd like me to take a look at your MDB file, please post your email address so I can contact you directly.
Regards,
Hilary
Message was edited by:
hfarrell

WAD 2 queries with 1 input values taking for only 1 query.

Hi Gurus,
Can anyone please tell me. I am working on a report 2 queries in WAD and 1 variable / input screen before running a report & 1 variable screen or filter pane after running a report. So 1.filter pane on top 2. chart (1st query) between 3. Analysis pane (2nd query) at bottom.
Problem here is when we give input values on variable screen or input screen in WAD it is taking that as an input & applying on 2nd query (analysis pane) where it is not applying on 1st query so 1st query is showing all values & 2nd query is showing values that are given as input & filter pane is showing values that are given as input in variable screen.
Here affected data providers is checked for both data providers. can anyone please tell me what would be the problem or how can i make input screen effect on both queries.
Thanks in advance.

Hi Sudheer,
Is the same variable being used across both the queries with all settings etc the same? In WAD web template settings, you can uncheck 'Display same Variables for different queries only once [MELT_VARIABLES]' & check if you see the same variable twice. Try entering the same value against both & check if the Chart qry gets affected.
--Priya
Edited by: Priya Jacob on Oct 1, 2010 6:22 AM

Queries with out workbooks???

Hi,
I wish to have a list of queries which do not have workbooks -
And i am creating a report which will have these information such as the list of queries with out workbooks and who is calling them??
Raj

God idea Parth!
Now is solved, the table is AGR_HIER
Thank you very much!!

Quering with sysdate function

hi all ,
there is a strange thing right here ,
i set the where clause for my database block to , ( test_date = sysdate )
then , query caused no records to be retrieved , and i am sure that the table has records with sysdate date .
why does this happen ?
even if i queried the table in the isqlplus ,
select test_date from patients ; -- then queries with sysdate date are retrieved , but if i write
select test_date from patients where test_date = sysdate . -- there is nothing to be retrieved .?
help ?
even i created a new table tt with one column(cc) , and inserted the value sysdate in it ,
when i select sysdate from dual then it works 27-NOV-12 but
when i select dd from cc where dd = sysdate then no rows selected
Edited by: semsem on Nov 27, 2012 11:33 AM

sysdate contains both date and current time elements, down to seconds. You will never find a match on sysdate, unless you hit the query at exactly the right time that matches some record in your table.
Set your where clause to:
( trunc (test_date) = trunc (sysdate) )
The "trunc" truncates (removes) the time element from your date values before doing the conditional test.
when i select sysdate from dual then it works 27-NOV-12Do this in SQL Plus:
alter session set nls_date_format='mm-dd-yyyy hh24:mi:ss';That will enable you to see the true date and time contained in your date datatypes. Here is an example:
SQL> select sysdate from dual;
SYSDATE
27-NOV-12
SQL> alter session set nls_date_format='mm-dd-yyyy hh24:mi:ss';
Session altered.
SQL> select sysdate from dual;
SYSDATE
11-27-2012 11:47:37Note in Forms, you can use two datatypes: DATE and DATETIME The both will query a date from the database, but the DATE datatype will remove the time element in the form, so a data change occurs. If you want to see the full date and time from the database column, use DATETIME, and set the Format Mask to something that will display everything.
Edited by: Steve Cosner on Nov 27, 2012 11:42 AM

Scaling factors for queries with cell references

Hello Experts,
We have this issue, we have queries which have 2 global structures with the cell references for few of the elements of rows and columns structure.
we need the scaling factors and currencies of the query which are defined in the rows and columns structure are to be displayed as separate column but with in the cells.
We have checked for the queries with the 2 structures without cell references are displayed as we need. But for the queries with the cell references on the 2 structures are not displaying the scaling factors as we need in separatly.
how can we make the query to display the scaling factors along with currencies to be in separate column.
we have entry selection as currency where we have only one currency can be entered so the we do not have the problem of multiple currencies.
please find the screen shot how we need the scaling factors to be displayed for the queries with cell references.
We have scaling factors enabled as 1000 for KFs and for % selections we have scaling factors as 1.
Thanks,
Santhosh

Hi
If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
Regards
Sandeep

Joining two queries with Visual Composer

Hallo,
I was working with visual composer to join two queries with the distinct operator. But on my table view, when i linked it with the distinct operator, i get only the key element customer (customer, customer_ext_key, customer_key). These are the queries that i want join:
Query 1:
Customer
Net Sales
Query 2:
Customer
Billed Quantity
What i want to see is the following result:
Customer
Net Sales
Billed Quantity
Can anybody help me with this problem?
Greeting,
Murat.

Hallo,
I was working with visual composer to join two queries with the distinct operator. But on my table view, when i linked it with the distinct operator, i get only the key element customer (customer, customer_ext_key, customer_key). These are the queries that i want join:
Query 1:
Customer
Net Sales
Query 2:
Customer
Billed Quantity
What i want to see is the following result:
Customer
Net Sales
Billed Quantity
Can anybody help me with this problem?
Greeting,
Murat.

2 queries with same technical name

Hi,
I have just opened this <b>QA</b> system. I find that there are two queries with the same technical name. The query definition is also the same. But it shows twice when I search for them.
I thought the system only allows a single technical name to be created once.
Please help me understand how this may have happned? And also how I can delete one of them without effecting the web templates and workbooks where this query is used.
Thanks
NEWBW

You can use the ABAP Program RENAME_DUPLICATE_ELEMENTS to rename the duplicate queries.
The system tracks query objects using the 25 char UID and not the technical name of the query. In some cases you will end up with 2 queries with the same technical name usually with transports from multiple systems.
You can also use the report ANALYZE_RSZ_TABLES to proactiveley analyze these kinds of issues in the system.
Thanks

How to delete queries with identical technical name in BEx

Hi everyone,
How do I delete query which is assigned to Roles in BEx.The problem is that there are two queries with the same technical name. And both queries are assigned to the same Role.Can anyone help me out in deleting both those queries.
Thanks in advance.
Regards,
Jayasree.

Hi,
When you do Changes in Dev and do the Transporting to Production, the Same Query which is already exist in Production is not overwritten. For that reason Queries will show as two. Check the note: 541024.
Check with your Basis team also.
You have to identify the UID Component of that Particular Query, which want to delete in production. Check the Queries as Date wise, you will find.
Delete these by using RSZDELETE tcode with UID Component of that particular Query in Production.
Let us know if you still have any issues.
Reg
Pra

Queries with c6

Similar Messages

Maybe you are looking for