Query about the DR -Standby

Hi Support,
I have a query about the DR -Standby:
1) Is FAL_CLIENT and FAL_SERVER parameter mandatory in both Primary and standy node?
2) How many standy by we can create for primary node?
Thanks

Dear Prashanth,
Quantity of 3 is rejected so you blocked it? why you want to bring it again to Quality? Use of putting in block is as follows:
Since quantity of 3 is rejected and need to be kept aside you are blocking the stock, the purchase person will send back this material to vendor directly from block stock (MBRL or MIGO). This is best practice.
There can be other situation that your vendor came to your place and done rework om that 3 blocked items and you are satisfied with the quality then you can use respective movement for transferring from block to unrestricted, if you want lot to be generated then assign 08 insp type and do inspection.
Hope this will help you better.
Best Regards,
Shekhar

Similar Messages

Query about the "User Decision

Hi,
I have a query about the u201CUser Decisionu201D, Suppose I have received the 10 quantity and lot get created for 10. At time of UD (QA11) I put 7 quantities in unrestricted and 3 in blocked stock .what we generally use to do with that block stock? Whether we again transfer it to quality stock (Movement 349)? Or move directly to unrestricted (movement: 343).
I tried to move the blocked stock in u201Cquality stocku201D in transaction MB1B with movement 349 but it had given error u201CChange the inspection stock of material 9112223334A in QM onlyu201D. In QM how to transfer the blocked stock in quality stock?
Regards,
PK

Dear Prashanth,
Quantity of 3 is rejected so you blocked it? why you want to bring it again to Quality? Use of putting in block is as follows:
Since quantity of 3 is rejected and need to be kept aside you are blocking the stock, the purchase person will send back this material to vendor directly from block stock (MBRL or MIGO). This is best practice.
There can be other situation that your vendor came to your place and done rework om that 3 blocked items and you are satisfied with the quality then you can use respective movement for transferring from block to unrestricted, if you want lot to be generated then assign 08 insp type and do inspection.
Hope this will help you better.
Best Regards,
Shekhar

Query About the SAP ABAP Module

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Query about the feauture in labview

HELLO SIR,
While performing 2-D FFT method of steganography in labview we do use flat command in it.My query is where do we find that command in labview? And Why do we use that?
Thanking you,

What are you referring to? What 2D FFT method of steganography? Where did you get this reference the the "flat" command?
You keep posting questions (this one, or this one, or this one) about steganography, but offer little information, and never follow up to the people trying to help you.

Query about the steps for Weblogic Server Upgrade from 8.1 to 10.3

Hi!
We have planned to upgrade our Weblogic Server from 8.1 to 10.3. Could anyone advise me:
1. How to upgrade the Weblogic Server from 8.1 to 10.3? Can the Weblogic Server 10.3 coexist with the Weblogic Server 8.1 in one physical server?
2. Where can the upgrade software be downloaded?
3. We have a web service currently running under Weblogic Workshop as the Weblogic Server is started via the workshop. Can this web service be run under Weblogic Server 10.3?
4. Are there any foreseeable issues/problems that will happen?
Please kindly help me. Thanks a lot.
Best Regards
May

Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
You can upgrade the domain after you install wls 10.3 using QuickStart.
When we migrated we have moved from windows to linux. We have installed, created domain, created managed servers, configured, etc. from scratch. We didn't face any 'show stopper' issues.

Query about the filterable tag in ADF Tables

Hi all,
We having an issue with the the implicit filtering feature provided by ADF. We have followed all the rules for filtering:
1. filterable="true" and sortable="true"
2. headertext is present
3. filterModel="#{bindings.InstanceDetailsVO11Query.queryDescriptor}"
   queryListener="#{bindings.InstanceDetailsVO11Query.processQuery}"
Now the filter is working fine. But after we reset the page the filter field still has the previous data entered by the user.
Is there any way we can refresh the field as well?
Any suggestions would be very helpfull1
Thanks.

Hi,
You can programmatically clear the filter fields and refresh the table by using the below snippet.
public void resetTableFilterListener(ActionEvent actionEvent) {
        FilterableQueryDescriptor queryDescriptor = (FilterableQueryDescriptor)getYourTable().getFilterModel();
        if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
            queryDescriptor.getFilterCriteria().clear();
            getOrdTable().queueEvent(new QueryEvent(getYourTable(), queryDescriptor));
Try if this works for your requirement.
Thanks

Query about the Cache in browser Netscape

The Page you are trying to view contains POSTDATA that has expired from cache. If you resend the data, any action the form carried out (such as a search or online purchase) will be repeated. To resend the data, click OK, Otherwise, click Cancel.

Hello All,
I apolozise for my last post which is incomplete. I am having a problem using Netscape 7.01 browser.
I have a servlet which has form fields and it takes in information and calls a another servlet on submitting and inserts the data in the database and shows a confirmation page. If I am using Netscape 4.7 , from this confirmation page if I press browser back button I get a message
" Data Missing
This document resulted from a POST operation and has expired from the cache. If you wish you can repost the form data to recreate the document by pressing the
reload button. "
But if I am using Netscape 7.01, from the confirmation page if I press back button I get the form page and if I click on forward button then I get a message
"The Page you are trying to view contains POSTDATA that has expired from cache. If you resend the data, any action the form carried out (such as a search or online purchase) will be repeated. To resend the data, click OK, Otherwise, click Cancel."
and if I am pressing OK then the insertion operation is taking place once again in the database.
Now how to avoid this condition, how to remove the cached information??
Please help me
Thanks,
Sarada.

Query about the events in ALV List

Hi,
When does the events being triggered in the ALV?
Whta is its behavior? Thanks a lot!

Hi,
Following this report is the sample report ALV. Kindly go through that one.
REPORT YMS_ALVDEMO                             .
TYPE-POOLS : SLIS.
TABLES : QALS.
DATA : BEGIN OF T_OUT OCCURS 0,
MATNR LIKE QALS-MATNR, "MATERIAL
WERK LIKE QALS-WERK, "PLANT
ART LIKE QALS-ART, "Inspaction Lot Type
OBJNR LIKE QALS-OBJNR, "Object Number
END OF T_OUT.
DATA : I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
I_LAYOUT TYPE SLIS_LAYOUT_ALV,
GS_LAYOUT TYPE LVC_S_LAYO,
G_REPID TYPE SY-REPID,
LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
SELECT-OPTIONS:S_PRFLOS FOR QALS-PRUEFLOS.
INITIALIZATION.
G_REPID = SY-REPID.
I_LAYOUT-ZEBRA = 'X'.
I_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
START-OF-SELECTION.
PERFORM FETCH_DATA.
END-OF-SELECTION.
PERFORM FILL_FIELDCAT.
PERFORM DISPLAY_ALV.
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
FORM FETCH_DATA .
SELECT MATNR WERK ART OBJNR
FROM QALS
INTO TABLE T_OUT
WHERE PRUEFLOS IN S_PRFLOS.
ENDFORM. " FETCH_DATA
*& Form FILL_FIELDCAT
* text
FORM FILL_FIELDCAT .
REFRESH I_FIELDCAT[].
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME         = G_REPID
      I_INTERNAL_TABNAME     = 'T_OUT'
      I_INCLNAME             = G_REPID
    CHANGING
      CT_FIELDCAT            = I_FIELDCAT[]
    EXCEPTIONS
      INCONSISTENT_INTERFACE = 1
      PROGRAM_ERROR          = 2
      OTHERS                 = 3.
ENDFORM. " FILL_FIELDCAT
*& Form display_alv
* text
FORM DISPLAY_ALV .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = G_REPID
      IS_LAYOUT          = I_LAYOUT
      IT_FIELDCAT        = I_FIELDCAT[]
    TABLES
      T_OUTTAB           = T_OUT
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
ENDFORM. " display_alv
Thanks,
Sankar M

Query about the enhancement

How the connection is done between an USER EXIT and the table entry by the system? Suppose if I create an USER EXIT for the ENHANCEMENT MM06E003 the how the connection is done during the purchase order creation by the system or whether there is an way to do the connection manually?

Dear Prashanth,
Quantity of 3 is rejected so you blocked it? why you want to bring it again to Quality? Use of putting in block is as follows:
Since quantity of 3 is rejected and need to be kept aside you are blocking the stock, the purchase person will send back this material to vendor directly from block stock (MBRL or MIGO). This is best practice.
There can be other situation that your vendor came to your place and done rework om that 3 blocked items and you are satisfied with the quality then you can use respective movement for transferring from block to unrestricted, if you want lot to be generated then assign 08 insp type and do inspection.
Hope this will help you better.
Best Regards,
Shekhar

Query about the Downloads in Apple iPad

Hi,
I have just got one apple iPad, but unable to download contain from my lap-top, please suggest

I think you mis-read my tip.
1. You need iTunes on computer.
2. Connect your iPad with the supplied dock cable to computer iTunes.
3. Select your iPad in computer iTunes.
4. Select the content (music, apps, etc) in computer iTunes
5. Click the Sync button.
Download the user manual and get yourself up to speed here:
iPad and iPad mini User Guide (For iOS 6.1 Software)

Query about the WebLogic conf for APS and Planning

Hi All,
We have threee servers used for Hyperion Planning and APS and are load balanced
Configuration details are as shown below for one server and remaining two servers will also has the same. In this configuration
APS shows as load balanced and Planning is shown pertaining to that one server alone. Can we make this Planning smartview connection
to be balanced or APS balance itself will take care of this for the connection of planning?
Am seeing performance issues with Planning with this configuration and server load is high falling on one server at times and is that due to this
configuration of Planning Smartview connection falling on one server?
Your help is much appreciated
</LocationMatch>
<LocationMatch /aps>
     SetHandler weblogic-handler
     PathTrim /
     WeblogicCluster
<ServerName1>:13080,<ServerName2>:13080,<ServerName3>:13080
WLProxySSL ON
</LocationMatch>
<LocationMatch /aps/*>
     SetHandler weblogic-handler
     PathTrim /
     WeblogicCluster
<ServerName1>:13080,<ServerName2>:13080,<ServerName3>:13080
WLProxySSL ON
</LocationMatch>
<LocationMatch /HyperionPlanning/SmartView>
     SetHandler weblogic-handler
     WLIOTimeoutSecs 6000
     WLCookieName HPSESSIONID
     PathTrim /
     WeblogicCluster <ServerName1>:8300
</LocationMatch>
<LocationMatch /HyperionPlanning/SmartView/*>
     SetHandler weblogic-handler
     WLCookieName HPSESSIONID
     WLIOTimeoutSecs 6000
     PathTrim /
     WeblogicCluster <ServerName1>:8300
</LocationMatch>
Thanks

Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
You can upgrade the domain after you install wls 10.3 using QuickStart.
When we migrated we have moved from windows to linux. We have installed, created domain, created managed servers, configured, etc. from scratch. We didn't face any 'show stopper' issues.

Query about the forum date

When I browse this forum as a guest, today's date appears as "Mar 2" (and that was yesterday). When I log in, however, the date is given as (the correct) March 3.
What's up with that?

When you're browsing as a guest, click on Guest Settings and change the time zone. This information is stored as a browser cookie and not on the server; therefore, it will need to be repeated for each cookie database instance you use. The settings of an account holder are stored on the server.
(41313)

Another query about XAResource

Hi All,
I have another query about the start/end behavior of the XAResource and its effect on a JMS transaction when the JMS server acts as a resource manager.
Suppose I start an XAResource supplied by a JMS server using an XID and pop some messages from a Queue in this transaction. Now before I end this transaction my client application dies or is disconnected from the server.
First off this transaction has not been committed or rollbacked so the transaction or the XID would still be registered on the server.
In this case what should be the steps for joining this transaction and doing the needful (say commit or rollback).
What flag should be used to re-start this resource?
Is there any specs defined for the above or as many other things in XA for JMS servers are, is this also vendor specific?
Thanks in advance for your answers.
cheers
Adolf

Hi Adolf,
XAResource is used to provide a two phase commit.
1 prepare
2 commit
now say a client fails before prepare, then the server detects that the client has gone down and so closes the connection which causes the whole transaction to roll back. Next time the clients has to begin it afresh.
if the transaction has been prepared, the prepared transaction can be actually commited by the TM. this stage is for all the components of the dustributed system to say that they are ready for commiting.

Query about transactions over the whole chart of accounts

hi, i'm a beginner with the SAP SDK, so pleaase be patient , i 'm working to do a SQL-query (yeah, i'm not allowed to use the COM objects) for all the transactions made on every account and also to retrieve their profit centers, so i have a few questions/validations that i need about the SAP bd-model:
as far as i know, the tables involved with this query i need are:
OJDT - journal entry
JDT1 - journal entry rows
OOCR - Distribution rules
OACT - Accounts
OPRC - Profit Centers
..¿or can i just skip the OOCR table and join the tables JDT1 and OPRC using the PrCode field? (the reference says this field is a FK of the OOCR table so that's why i'm not sure about this, even if the field name is fool-proof )
thanxs for your time!!
EDIT: this is the query so far, i have my doubts about the use of PrcCode(JDT1) as a FK for the OPRC table (because like i was mentioning before, the documentation says it isn't, it's a FK for the OORC table)
also the DI API Help file says there is also another 4 FK fields (ocrcode2,ocrcode3,ocrcode4,ocrcode5) for the OOCR table, so i'm wondering if this SQL query is fine like this or if i'm missing something else please help mee!
SELECT
je1.TransId
,je1.Debit
,je1.Credit
,acc.AcctCode
,acc.AcctName
,prc.PrcName
,prc2.PrcName
,prc3.PrcName
,prc4.PrcName
,prc5.PrcName
,je.Memo
FROM
JDT1 as je1
left join OPRC as prc on je1.ProfitCode = prc.PrcCode
left join OPRC as prc2 on je1.OcrCode2 = prc2.PrcCode
left join OPRC as prc3 on je1.OcrCode3 = prc3.PrcCode
left join OPRC as prc4 on je1.OcrCode4 = prc4.PrcCode
left join OPRC as prc5 on je1.OcrCode5 = prc5.PrcCode
inner join OACT as acc on je1.Account = acc.AcctCode
inner join OJDT as je on je1.TransId = je.TransId
and je.RefDate <= '20101028 00:00'
GROUP BY
je1.TransId
,je1.Credit
,je1.Debit
,acc.AcctCode
,acc.AcctName
,prc.PrcName
,prc2.PrcName
,prc3.PrcName
,prc4.PrcName
,prc5.PrcName
,je.Memo

When u have created your company that time u should create with copy anuway
but it's look to me your COA is not generated with depending accounts

Some question about the query designer

hello, dear all,
I am a new comer of here, and I am intersting in BI, but I have no basic knowledge about it.
so I just want someone could give me some advice about it.
our boss need I do the developer about the query designer, I just have searched in this forum. but nothing founded for I am a new comer here,
I heard there are some training document of the query designer, could someone give me the URL, thanks.

Hi,
Query desinger is used to develop a Query, Query can be created on following data targets
-Info Cube
-DSO
Virtual data target
-MultiCube
-Infoset
-Multiprovider
We have 5 section in query designer
- Infoprovider : where we select the data target , on which report to be created
-Filter : to restrict value at infoprovider level ( if you want data for year 2008, for example)
-Free Characterstic : this allow you to drill down
-Columns : char/keyfigs to be display in columns can be added here
Row: key/char to be display in Rows can be added here
gv me ur mailid i will let u have Bex manual,
I would suggest , if you have any IDES ( training ) system , where you can log in and then go to RRMX,
and try to create new query and add any data target ( which is already created ) and then drag and drop the char/key fig to the required section ,
save it and execute it .....
if you play arround and see the output , that would help u to understand how to work with query designer.
Hope this helps
Sukhi
Edited by: Sukhvidner Singh on Nov 4, 2009 5:36 PM

Query about the DR -Standby

Similar Messages

Maybe you are looking for