Query after insert

Hi All
Does anyone know how to make a form do a query just after a
commit? Any help would be appreciated.
Regards
Herman

Thanks Jeremy. I looked through that thread and, unfortunately, it did not help.
On that thread Rick mentioned being able to do multiple SQL statements from a single Fixed Query. I have never done that. How do you separate them? Even if that can be done, you can't execute an insert statement from a Fixed Query so I think you would still need to go to PLSQL--unless you can somehow accomplish it using multiple statements in a Command query.
Any insights would be appreciated. I still think there must be a cleaner way to get the id back without using a cursor but so far I don't know what it is.
Thanks,
Mike

Similar Messages

Refresh LOV after inserting data in correspondent table

Hi all,
I am using Jdeveloper 11.1.1.2 and ADFBC.
I have a page with a table (tableA) with some fields. One of them has a LOV associated to another table(tableB). I have a button (button1) that shows a popup(popup1) and opens a new task flow with a fragment to insert data in the tableB.
After inserting/modifying rows in tableB and after pressing commit (property: end-transaction) or rollback buttons (property: end-transaction and restore save point), LOV does not refresh.
I have tried to set the property partial triggers of the LOV to button1 or popup1 and it does not work.
How can I solve it?
Thank you.
Andrea

How about VO for table B ? Did you refresh that ? I didn't use the same VO for table & LOV.
so in "List data Source" -- VO -- I am using "SQL statement" and statement includes fields from Table B and Table A.
VO for LDS using "Rows populated by a SQL query with read-only access". I didn't use "Updateable Access through Entity Objects".
Sample of VO of LDS:
select A.model_number modelNumber, a.part_number partNumber, b.MODEM_TYPE ModemType
from table A a,Table B b
where a.PART_NUMBER_ID = b.PART_NUMBER_ID
and a.part_number_id =:partID
Edited by: albertpi on Mar 16, 2010 7:26 AM

After Insert Trigger Not Working

Hi All,
I am not a guru in writing triggers.
I am inserting new records in a Table FA_BOOKS by application and this inserts records in FA_ADDITIONS_B. This is a vanilla process.
i have written a trigger on FA_ADDITIONS_B, and i want to update the cost from the fa_books to fa_additions_b column attribute21
The trigger i have written is After insert on FA_ADDITIONS_B and i try to select cost from the fa_books for the :new.asset_id.
SELECT COST
INTO v_cost
FROM FA_BOOKS
WHERE ASSET_ID = :NEW.ASSET_ID;
this is always returning no_data_found exception and i do not understand how to update the attribute21 in FA_ADDITIONS_B
Here is a sample of my trigger.
CREATE OR REPLACE TRIGGER update_attribute21_new_asset_1
after INSERT ON fa_ADDITIONS_B
FOR EACH ROW
DECLARE
V_COST NUMBER;
BEGIN
SELECT COST
INTO v_cost
FROM FA_BOOKS
WHERE ASSET_ID = :NEW.ASSET_ID;
update fa_ADDITIONS_B
set attribute21 = v_cost
where ASSET_ID = :NEW.ASSET_ID;
END;
Any help on this will be appreciated.
TX in advance.
Regards,

I still haven't understood the reason why you can't transfer the COST information from FA_BOOKS to FA_ADDITIONS_B in the initial trigger on FA_BOOKS that populates FA_ADDITIONS_B. Or how is the population of FA_ADDITIONS_B accomplished? Is it part of the application code?
Regarding the NO_DATA_FOUND issue:
Is it ensured that populating the FA_ADDITIONS_B table is done in the same transaction as the FA_BOOKS inserts or that the FA_BOOKS transaction is committed?
Why do you need that additional trigger?
My assumption is that you're in a trigger "chain" - if I get your approach correctly - you're basically attempting to query FA_BOOKS in a trigger on FA_ADDITIONS_B that in turn has been triggered by a trigger on FA_BOOKS which gets us back to the "mutating" trigger issue. You can't read a table that is currently in the process of being modified.
Or even worse: The (potential) trigger on FA_BOOKS that populates FA_ADDITIONS_B uses "autonomous transaction" and therefore the trigger on FA_ADDITIONS_B can't see the changes of the original transaction.
As already mentioned: Be very careful with "autonomous transactions" in general. There are only a few cases where these are actually useful (e.g. logging purposes), but Tom Kyte has written numerous articles why triggers and in particular autonomous transactions are mostly evil.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Print insert result to a printer in TSQL trigger after insert - Need help.

Hi,
I am trying to print a record to a printer whenever a new record is inserted into a table called PrintTickets, using TSQL trigger for insert.
Is it possible to print a new inserted record to a printer?
Here is the trigger tsql statement:
ALTER TRIGGER [dbo].[PrintDeal]
ON [dbo].[PrintTickets]
AFTER INSERT
AS
declare @Id numeric(18,0)
,@DealId char(15)
,@ValueDatePeriod1Currency1 datetime
,@Bank1Name char(56)
,@Currency1 char(3)
,@Currency2 char(3)
,@PaymentInstructionP1C1 char(80)
,@DealerId char(6)
,@DealVolumeCurrency1 float
,@CalVolumeP1C2 float
,@ExchangeRatePeriod1 float
declare @tmp table
Id numeric(18,0)
,DealId char(15)
,ValueDatePeriod1Currency1 datetime
,Bank1Name char(56)
,Currency1 char(3)
,Currency2 char(3)
,PaymentInstructionP1C1 char(80)
,DealerId char(6)
,DealVolumeCurrency1 float
,CalVolumeP1C2 float
,ExchangeRatePeriod1 float
PRIMARY KEY (Id)
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for trigger here
insert @tmp
select
Id
, DealId
, ValueDatePeriod1Currency1
, Bank1Name
, Currency1
, Currency2
, PaymentInstructionP1C1
, DealerId
, DealVolumeCurrency1
, CalVolumeP1C2
, ExchangeRatePeriod1
FROM dbo.PrintTickets
WHERE ID=@@IDENTITY
select @Id=Id
,@DealId=DealId
,@ValueDatePeriod1Currency1=ValueDatePeriod1Currency1
,@Bank1Name=Bank1Name
,@Currency1=Currency1
,@Currency2=Currency2
,@PaymentInstructionP1C1=PaymentInstructionP1C1
,@DealerId=DealerId
,@DealVolumeCurrency1=DealVolumeCurrency1
,@CalVolumeP1C2=CalVolumeP1C2
,@ExchangeRatePeriod1=ExchangeRatePeriod1
from @tmp
-- Code to print to a physical printer if possible
END
The table is called PrintTickets and it contains the following columns:
Id numeric(18,0)
,DealId char(15)
,ValueDatePeriod1Currency1 datetime
,Bank1Name char(56)
,Currency1 char(3)
,Currency2 char(3)
,PaymentInstructionP1C1 char(80)
,DealerId char(6)
,DealVolumeCurrency1 float
,CalVolumeP1C2 float
,ExchangeRatePeriod1 float
PRIMARY KEY (Id)
The dummy records that I am inserting for testing the results in csv format:
Id,DealId,ValueDatePeriod1Currency1,Bank1Name,Currency1,Currency2,PaymentInstructionP1C1,DealerId,DealVolumeCurrency1,CalVolumeP1C2,ExchangeRatePeriod1
696,XXX#33111 ,2014-03-04 00:00:00.000,HSBC ,USD,EUR,XXXXXXXXXXXXXXXXXXXXXXX ,MAT ,342342,87987,0.3123
697,XXX#33113 ,2014-03-04 00:00:00.000,USB ,EUR,USD,9999999999999999999999,ZXY,2334243,32213,0.3245
698,XXX#33114 ,2014-03-03 00:00:00.000,SWISS BANK ,CHF,USD,99999999999999900000,XYZ ,32423424,342,0.83432
699,XXX#33115 ,2014-03-03 00:00:00.000,UK BANK ,USD,PND,XXXXXXXXXXXXXXXXXXXXXXX ,ABC,9809808,0,0.0349
700,XXX#33116 ,2014-03-04 00:00:00.000,USCF BANK ,XXX,XXX,XXXXXXXXXXXXXXXXXXXXXXX ,ABC,89798797,756756,0.734
I appreciate any help.
Thanks in advance.

Is it possible to print a new inserted record to a printer?
From SQL Server?
The task of SQL Server is to manage large of data effciently. It is not a general programming environment. It could possibly be done with a CLR procedure that that talks to the printer, but it is not the correct solution.
A possible design could be to post a message on a Service Broker queue, and then the printing server would poll the queue and print the ticket.
By the way, there are more flaws in your trigger. To find the inserted rows, you need to query the virtual table "inserted" which holds a copy of these rows. Furthermore, since a trigger fires once per statement, the trigger must handle the fact
that multiple rows are inserted.
Erland Sommarskog, SQL Server MVP, [email protected]

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Resultset after insertion is the same before insertion

hi guys, i get an updatable resultset from a connection then used it to insert a new row but the result set doesn't chane after insertion, i mean the no of rows before insertion is the same after insertion and also the data, this is the code prove what i say
          int currentRow = resultset.getRow();
          display(resultset);
          resultset.moveToInsertRow();
          for (int i = 0; i < fields.size(); i++) {
            updateCurrentRow(resultset, fields.getField(i));
          resultset.insertRow();
          display(resultset);the display function body is
        int currentRow = res.getRow();
        res.first();
        while (true)
          System.out.println("CountyCode= " + res.getInt(1));
          System.out.println("CountyName= " + res.getString(2));
          if (!res.next())
            break;
        res.absolute(currentRow);Please help me
N.B.
the type of resultset after creation it is res.getConcurrency() == ResultSet.CONCUR_UPDATABLE?????
Thanks for your efforts

thnaks for your reply, but when i used
ownInsertsAreVisible() method; returned true, that is
mean that the driver and DB supports the updating of
reultset after insertion. but this is not real at my
case? that was strange. if you have any comment please
do,just checking the row is in fact being inserted into the database? i mean you can't see it right away but you can see it later right?
if the row is being inserted and the ownInsertsAreVisible() returns true then there are two possible scenarios.
1) the cursor type of your result set does not support that method, meaning the method is true in some cases but not yours... for example your query might have a join or something which makes it not possible for the result set do be fully cognizant of changes. and sometimes there are database specific cursors that have to specified as part of your query in a proprietary way to get the "right" cursor. you will need to investigate the docs for your database to figure out if any of this is true.
2) the meta data is lying.

Analyze table after insert a large number of records?

For performance purpose, is it a good practice to execute an 'analyze table' command after inserting a large number of a records into a table in Oracle 10g, if there is a complex query following the insert?
For example:
Insert into foo ...... //Insert one million records to table foo.
analyze table foo COMPUTE STATISTICS; //analyze table foo
select * from foo, bar, car...... //Execute a complex query whithout hints
//after 1 million records inserted into foo
Does this strategy help to improve the overall performance?
Thanks.

Different execution plans will most frequently occur when the ratio of the number of records in various tables involved in the select has changed tremendously. This happens above all if 'fact' tables are growing and 'lookup' tables stayed constant.
This is why you shouldn't test an application with a small number of 'fact' records.
This can happen both with analyze table and dbms_stats.
The advantage of dbms_stats is, it will export the current statistics to a stats to table, so you can always revert to them using dbms_stats.import_stats.
You can even overrule individual table and column statistics by artificial values.
Hth
Sybrand Bakker
Senior Oracle DBA

After Insert Trigger with DML on the subject table?

I am trying to set up e-mail notifications, so I created a procedure, which accepts the argument of an id. In the procedure, it queries the table and sends out mail based on the result set. (in the trigger, I pass in the value of :NEW.id). The procedure then queries the table for that row id.
First, for the after update I was getting the error:
ORA-04091: table is mutating, trigger/function may not see it ORA-06512
So, I was advised to do in the declare block: pragma autonomous_transaction; I did that, and that solved the problem there. SO I did the same in the after insert trigger, but then I get the error:
ORA-00060: deadlock detected while waiting for resource ORA-06512
I asked our DBA and he said you are not able to query the table of which the trigger is a subject of. I thought it would be possible since its After insert or update?
Can anyone offer any suggestions ? :)
Thanks,
Trent

Any reason why it would work in an after update trigger then?
So, I was advised to do in the declare block: pragma autonomous_transaction; I did that, and that solved the problem therePRAGMA AUTONOMOUS_TRANSACTION "bends" the restriction against SQL against base table.
It is the equivalent to tap dancing across a mine field.
You might get the desired results most of the time or you might get a tasty surprise when you least expect it.
What happens to your application in the future, if/when the UPDATE has a ROLLBACK issued & PRAGMA AUTONOMOUS_TRANSACTION has successfully completed?
Inquiring minds would like to know the answer.

After insert trigger error

Hi,
i have created an Trigger After Insert According to me, It's correct But it show me Error Can Not Insert Null in to code.
CREATE OR REPLACE TRIGGER "AFT_INS_CRM_CUSTOMER_CONTACTS"
AFTER INSERT ON FH_TAPROD.CRM_SALES_CUSTOMER_CONTACTS
FOR EACH ROW
DECLARE
custo_id NUMBER;
var_code varchar2(8);
cont_code varchar2(5);
BEGIN
SELECT CUSTOMER_ID INTO custo_id FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =:NEW.ID;
select CODE into var_code from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=custo_id ;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') into cont_code FROM vendor_customer_contact
insert into VENDOR_CUSTOMER_CONTACT(SBU_CODE ,CODE,CONTACT_CODE, CONTACT_NAME ,PHONE_NO1 ,MOBILE_NO ,EMAIL, ADDRESS1,CUST_ID,UPLOAD_CRM)
   values('0002',var_code,cont_code,:NEW.CONTACT_NAME,:NEW.CONTACT_PHONE,:NEW.CONTACT_CELL,:NEW.CONTACT_EMAIL,:NEW.CONTACT_ADDRESS,custo_id,'CRM');
END;
CREATE TABLE "CRM_SALES_CUSTOMER_CONTACTS"
   (     "ID" NUMBER,
     "CUSTOMER_ID" NUMBER,
     "CONTACT_NAME" VARCHAR2(255),
     "CONTACT_EMAIL" VARCHAR2(255),
     "CONTACT_PHONE" VARCHAR2(255),
     "CONTACT_CELL" VARCHAR2(255),
     "CONTACT_ADDRESS" VARCHAR2(4000),
      PRIMARY KEY ("ID") ENABLE
INSERT INTO CRM_SALES_CUSTOMER_CONTACTS VALUES (204414862717175278810736770347803084847, 204232590877603599356756434170666837075, 'SANJAY',    '[email protected]', 1246456, 57152357,'Near Post Office');
CREATE OR REPLACE TRIGGER "BIU_CRM_SALES_CUST_CONTACTS"
BEFORE INSERT OR UPDATE ON CRM_SALES_CUSTOMER_CONTACTS
    FOR EACH ROW
begin
    if inserting and :new.id is null then
        select to_number(sys_guid(),'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX') into :new.id from dual;
    end if;
    if inserting then
        :new.created_by := nvl(v('APP_USER'),USER);
        :new.created_on := sysdate;
    end if;
    if updating then
        :new.updated_by := nvl(v('APP_USER'),USER);
        :new.updated_on := sysdate;
    end if;
end;My After Insert TAble
CREATE TABLE "VENDOR_CUSTOMER_CONTACT"
   (     "SBU_CODE" VARCHAR2(4) NOT NULL ENABLE,
     "CODE" VARCHAR2(8) NOT NULL ENABLE,
     "CONTACT_CODE" VARCHAR2(5) NOT NULL ENABLE,
     "CONTACT_NAME" VARCHAR2(1000) NOT NULL ENABLE,
     "PHONE_NO1" VARCHAR2(100),
     "MOBILE_NO" VARCHAR2(25),
     "EMAIL" VARCHAR2(1000),
     "ADDRESS1" VARCHAR2(4000),
     "CUST_ID" NUMBER,
     "UPLOAD_CRM" VARCHAR2(10),
      CONSTRAINT "VCV_PK" PRIMARY KEY ("SBU_CODE", "CODE", "CONTACT_CODE") ENABLE
ORA-01400: cannot insert NULL into ("FH_TAPROD"."VENDOR_CUSTOMER_CONTACT"."CODE") ORA-06512: at "FH_TAPROD.AFT_INS_CRM_CUSTOMER_CONTACTS", line 30 ORA-04088: error during execution of trigger 'FH_TAPROD.AFT_INS_CRM_CUSTOMER_CONTACTS'How to resolve it.
Thanks
Edited by: 805629 on Jan 14, 2011 1:26 AM

This is your trigger
CREATE OR REPLACE TRIGGER "AFT_INS_CRM_CUSTOMER_CONTACTS"
AFTER INSERT ON FH_TAPROD.CRM_SALES_CUSTOMER_CONTACTS
FOR EACH ROW
DECLARE
custo_id NUMBER;
var_code varchar2(8);
cont_code varchar2(5);
BEGIN
SELECT CUSTOMER_ID INTO custo_id FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =:NEW.ID;
select CODE into var_code from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=custo_id ;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') into cont_code FROM vendor_customer_contact;
insert into VENDOR_CUSTOMER_CONTACT(SBU_CODE ,CODE,CONTACT_CODE, CONTACT_NAME ,PHONE_NO1 ,MOBILE_NO ,EMAIL, ADDRESS1,CUST_ID,UPLOAD_CRM) values('0002',var_code,cont_code,:NEW.CONTACT_NAME,:NEW.CONTACT_PHONE,:NEW.CONTACT_CELL,:NEW.CONTACT_EMAIL,:NEW.CONTACT_ADDRESS,custo_id,'CRM');
END;This is the insert who fire it
INSERT INTO CRM_SALES_CUSTOMER_CONTACTS VALUES (204414862717175278810736770347803084847, 204232590877603599356756434170666837075, 'SANJAY',    '[email protected]', 1246456, 57152357,'Near Post Office');Then the trigger execute
SELECT CUSTOMER_ID FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =204232590877603599356756434170666837075;
select CODE from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=<result of previous query>;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') FROM vendor_customer_contact;
Insert ...And fail.
Execute the select in your sqlplus one by one and post result.

Help me to return the primary key after insert the row

Hi
I am using JDBC, with oracle database. i have welformed normalization tables .i am inserting parent table with dynamic sequence number as primary key .after inserting i need inserted row primary key .how to get the inserted row primary key with out using select statement
please help me
Thanks in advance
Edited by: 849614 on Apr 4, 2011 5:41 AM
Edited by: 849614 on Apr 4, 2011 5:54 AM

Hello
If I undestand you, I think you should do this:
Connection conexion = dataSource.getConnection();
int idCenter=-1;
String query = "Begin Insert into CENTER (NAME_CENTER) values (?) returning ID_CENTER into ?; end";
callableStatement = conexion.prepareCall(query.toString());
     callableStatement.setString(1, "Center name");
     callableStatement.registerOutParameter(2, java.sql.Types.INTEGER);
          callableStatement.executeUpdate();
          idCenter=callableStatement.getInt(2);
This way, you have in idCenter the primary key of the line that has just been inserted.
Edited by: cris on 05-abr-2011 5:28

Corrupted uniquemember attribute after inserting new member with Console

After inserting a new member in a group with many members (~400 uniqueMembers) with iPlanet Console some old members (~300) in the uniqueMember list disappeared.
The bug is not reproducable but occured about 3-4 times.
Is there a known bug in iPlanet Console 5.1 ?
OS/iDS-Version: Solaris 8/iDS 5.1

Vitaly,
When you call insertRow on a view object, the new row is inserted after the current row. By default as well, sorting occurs in the DB, so you must re-query in order to see the rows in sorted order (or click on the column headers to do the sort, which would also ask the DB to do the sorting). You could have a look at section 35.6 in the Fusion Developer's Guide for ADF, which shows how to turn on in-memory sorting and cause the sort to happen without requerying.
Best,
John

Using Database Change Notification instead of After Insert Trigger

Hello guys! I have an after insert trigger that calls a procedure, which in turn is doing an update or insert on another table. Due to mutating table errors I declared the trigger and procedure as autonomously transactional. The problem is, that old values of my main tables are inserted into the subtable since the after insert/update trigger is fired before the commit.
My question is how can I solve that and how could I use the change notification package to call my procedure? I now that this notification is only started after a DML/DDL action has been commited on a table.
If you could show me how to carry out the following code with a Database Change Notification I'd be delighted. Furthermore I need to know if it suffices to set up this notification only once or for each client seperately?
Many thanks for your help and expertise!
Regards,
Sebastian
declare
cnumber number (6);
begin
select count(*) into cnumber from (
select case when (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=1) < (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=2) then 1 end as action from borki.fangzahlen
        where lng_falle      = :new.lng_falle
        and int_fallennummer = :new.int_fallennummer
        and lng_schaedling   = :new.lng_schaedling
        and date_datum       > '31.03.2010') where action = 1;
if cnumber != 0 then
delete from borki.tbl_test where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling   = :new.lng_schaedling
and date_datum       > '31.03.2010';
commit;
pr_fangzahlen_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling);

It looks like you have an error in line 37 of your code. Once you fix that the problem should be resolved.

How can i print reports to different printer by use Trigger on table after insert

Hello,
Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
regards,
Linda.

What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
Of course the "different printer" bit will have to be data driven as triggers are not interactive.
rgds, APC

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

Before or After insert trigger on HR_API_TRANSACTION_VALUES

I am on the termination page of SSHR and after entering the details when clcked on 'Next' the validations built in before / after insert trigger of HR_API_TRANSACTION_VALUES does not retrieve the data and the error 'No data found' is displayed.
We do not have AME approval. When clicked on 'Next' it goes to the review page. When I do a select on the HR_API_TRANSACTION_VALUES the data do exists but the validation does not work.
We have Oracle HRMS 11i with database as 11g.
Please give a resolution at the earliest.

you can use
hr_transaction_api.set_varchar2_value
or
hr_transaction_api.set_number_value
based on what type of value that you want to update

Query after insert

Similar Messages

Maybe you are looking for