Query Creation Issue

Dear Sap Gurus,
I need your help.
When I add a particular key figures in my query based on the ODS IIC_O30.
The check query result is ok.
but during the query execution I have the following error message:
Error in SQL Statement: SAPSQL_INVALID_FIELDNAME /BIC/AIIC_O3000~CALDAY
System error: RSDRC / FORM DATA_GET_ODS ERROR IN RSDRO_READ_ODS_DATA IIC_O30 99
Any Clue ???
Thanks

Hi,
Is the keyfigure using some exception aggregates ?? Paste some details of the key figure.
Also are you able to list down all entries of ODS using Manage -> Show active data ??
Regards
Mr Kapadia

Similar Messages

Basic Query Creation

Hello,
Our company is about to go live with B1 and E commerce. We are very much looking forward to getting the ball rolling: the old MOM system and Sitelink shopping cart is causing issues!
Anyway, before i go too much further i would like to get hold of some basic Query creation documentation. So far i have been unable to find any.
If i have posted this in the wrong discussion group i apologies.
I look forward to hearing your comments and becoming a regular in this group,
Thanks,
Charlie

Hi Charlie,
Beside this forum, you may also search and post here:
SAP Add-Ons
Thanks,
Gordon

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

10.6.7 - general pdf creation issues?

I wondered whether anyone else had run into this issue after updating to 10.6.7 when using pdfs created by Preview - perhaps related to the pdf/font issue.
If it is generally happening, then the 10.6.7 pdf-font issue has an even larger
impact than previously described:
1. Open a pdf document in Preview
2. Select a region and save to clipboard
3. Save as a new pdf file
4. Then try importing it as a "Picture" into any of the new Office 2011 apps: Word, PPT, etc.
This crashes my office 2011 apps (latest version, 14.02) But NOT any earlier version of Office (2008. etc.), which may not do as much pdf checking.
Before the 10.6.7 upgrade (ie, 10.6.6), this never happened with Office 2011.
Acrobat complains when opening the Preview-created pdfs about 'missing fonts', so I suspect some sort of pdf creation issue.
Any fixes (besides the previously suggested one of downgrading to 10.6.6)
If it's a real bug (not just local to my system), then it's a more far-reaching one than previously described.

rcberwick wrote:
So, 3 different Apple tech support people say they know this problem affects
"multiple applications, including any that deal with pdf files" but that "no fix is
currently in the works"
That is wrong because it only involves OpenType Postscript fonts.
The only solution offered so far is to "downgrade by doing Archive & Install" and
then re-applying each Combo Upgrade, starting with 10.6.3 up to 10.6.6.
You wouldn't have to do that either. That is the point of a Combo update. You only need to apply the one you want. It includes all of the previous updates.

Query Performance Issues

Hi Gurus,
I m woking on performance tuning at the moment and wants some tips
regarding the Query performance tuning,if anyone can helpme in that
rfrence.
the thing is that i have got an idea about the system and now the
issues r with DB space, Abap Dumps, problem in free space in table
space, no number range buffering,cubes r using too many aggrigates,
large IC,Large ODS, and many others.
So my questionis that is anyone can tell me that how to resolve the
issues with the Large master data tables,and large ODS,and one more
importnat issue is KPI´s exceding there refrence valuses so any idea
how to deal with them.
waiting for the valuable responces.
thanks In advance
Redards
Amit

Hi Amit
For Query performance issue u can go for :-
Aggregates : They will help u a lot to make ur query faster becuase query doesnt hits ur cube it hits the aggregates which has very less number of records in comp to ur cube
secondly i wud suggest u is use CKF in place of formulaes if any in the query
other thing is avoid upto the extent possible the use fo nav attr . if u want to use them use it upto the minimal level reason i am saying so is during the query exec whn ever there is nav attr it provides unncessary join to ur MD and thus dec query perfo
be specifc to rows and columns if u r not sure of a kf or a char then better put it in a free char.
use filters if possible
if u follow these m sure ur query perfo will inc
Assign points if applicable
Thanks
puneet

SQL query performance issues.

Hi All,
I worked on the query a month ago and the fix worked for me in test intance but failed in production. Following is the URL for the previous thread.
SQL query performance issues.
Following is the tkprof file.
CURSOR_ID:76 LENGTH:2383 ADDRESS:f6b40ab0 HASH_VALUE:2459471753 OPTIMIZER_GOAL:ALL_ROWS USER_ID:443 (APPS)
insert into cos_temp(
TRX_DATE, DEPT, PRODUCT_LINE, PART_NUMBER,
CUSTOMER_NUMBER, QUANTITY_SOLD, ORDER_NUMBER,
INVOICE_NUMBER, EXT_SALES, EXT_COS,
GROSS_PROFIT, ACCT_DATE,
SHIPMENT_TYPE,
FROM_ORGANIZATION_ID,
FROM_ORGANIZATION_CODE)
select a.trx_date,
g.segment5 dept,
g.segment4 prd,
m.segment1 part,
d.customer_number customer,
b.quantity_invoiced units,
--       substr(a.sales_order,1,6) order#,
substr(ltrim(b.interface_line_attribute1),1,10) order#,
a.trx_number invoice,
(b.quantity_invoiced * b.unit_selling_price) sales,
(b.quantity_invoiced * nvl(price.operand,0)) cos,
(b.quantity_invoiced * b.unit_selling_price) -
(b.quantity_invoiced * nvl(price.operand,0)) profit,
to_char(to_date('2010/02/28 00:00:00','yyyy/mm/dd HH24:MI:SS'),'DD-MON-RR') acct_date,
'DRP',
l.ship_from_org_id,
p.organization_code
from   ra_customers d,
gl_code_combinations g,
mtl_system_items m,
ra_cust_trx_line_gl_dist c,
ra_customer_trx_lines b,
ra_customer_trx_all a,
apps.oe_order_lines l,
apps.HR_ORGANIZATION_INFORMATION i,
apps.MTL_INTERCOMPANY_PARAMETERS inter,
apps.HZ_CUST_SITE_USES_ALL site,
apps.qp_list_lines_v price,
apps.mtl_parameters p
where a.trx_date between to_date('2010/02/01 00:00:00','yyyy/mm/dd HH24:MI:SS')
and to_date('2010/02/28 00:00:00','yyyy/mm/dd HH24:MI:SS')+0.9999
and   a.batch_source_id = 1001     -- Sales order shipped other OU
and   a.complete_flag = 'Y'
and   a.customer_trx_id = b.customer_trx_id
and   b.customer_trx_line_id = c.customer_trx_line_id
and   a.sold_to_customer_id = d.customer_id
and   b.inventory_item_id = m.inventory_item_id
and   m.organization_id
     = decode(substr(g.segment4,1,2),'01',5004,'03',5004,
     '02',5003,'00',5001,5002)
and   nvl(m.item_type,'0') <> '111'
and   c.code_combination_id = g.code_combination_id+0
and   l.line_id = b.interface_line_attribute6
and   i.organization_id = l.ship_from_org_id
and   p.organization_id = l.ship_from_org_id
and   i.org_information3 <> '5108'
and   inter.ship_organization_id = i.org_information3
and   inter.sell_organization_id = '5108'
and   inter.customer_site_id = site.site_use_id
and   site.price_list_id = price.list_header_id
and   product_attr_value = to_char(m.inventory_item_id)
call        count       cpu   elapsed         disk        query      current         rows    misses
Parse           1      0.47      0.56           11          197            0            0         1
Execute         1   3733.40   3739.40        34893    519962154           11          188         0
total           2   3733.87   3739.97        34904    519962351           11          188         1
|         Rows Row Source Operation
| ------------ ---------------------------------------------------
|          188 HASH JOIN (cr=519962149 pr=34889 pw=0 time=2607.35)
|          741 .TABLE ACCESS BY INDEX ROWID QP_PRICING_ATTRIBUTES (cr=519939426 pr=34889 pw=0 time=2457.32)
|    254644500 ..NESTED LOOPS (cr=519939265 pr=34777 pw=0 time=3819.67)
|    254643758 ...NESTED LOOPS (cr=8921833 pr=29939 pw=0 time=1274.41)
|          741 ....NESTED LOOPS (cr=50042 pr=7230 pw=0 time=11.37)
|          741 .....NESTED LOOPS (cr=48558 pr=7229 pw=0 time=11.35)
|          741 ......NESTED LOOPS (cr=47815 pr=7223 pw=0 time=11.32)
|         3237 .......NESTED LOOPS (cr=41339 pr=7223 pw=0 time=12.42)
|         3237 ........NESTED LOOPS (cr=38100 pr=7223 pw=0 time=12.39)
|         3237 .........NESTED LOOPS (cr=28296 pr=7139 pw=0 time=12.29)
|         1027 ..........NESTED LOOPS (cr=17656 pr=4471 pw=0 time=3.81)
|         1027 ...........NESTED LOOPS (cr=13537 pr=4404 pw=0 time=3.30)
|          486 ............NESTED LOOPS (cr=10873 pr=4240 pw=0 time=0.04)
|          486 .............NESTED LOOPS (cr=10385 pr=4240 pw=0 time=0.03)
|          486 ..............TABLE ACCESS BY INDEX ROWID RA_CUSTOMER_TRX_ALL (cr=9411 pr=4240 pw=0 time=0.02)
|        75253 ...............INDEX RANGE SCAN RA_CUSTOMER_TRX_N5 (cr=403 pr=285 pw=0 time=0.38)
|          486 ..............TABLE ACCESS BY INDEX ROWID HZ_CUST_ACCOUNTS (cr=974 pr=0 pw=0 time=0.01)
|          486 ...............INDEX UNIQUE SCAN HZ_CUST_ACCOUNTS_U1 (cr=488 pr=0 pw=0 time=0.01)
|          486 .............INDEX UNIQUE SCAN HZ_PARTIES_U1 (cr=488 pr=0 pw=0 time=0.01)
|         1027 ............TABLE ACCESS BY INDEX ROWID RA_CUSTOMER_TRX_LINES_ALL (cr=2664 pr=164 pw=0 time=1.95)
|         2063 .............INDEX RANGE SCAN RA_CUSTOMER_TRX_LINES_N2 (cr=1474 pr=28 pw=0 time=0.22)
|         1027 ...........TABLE ACCESS BY INDEX ROWID RA_CUST_TRX_LINE_GL_DIST_ALL (cr=4119 pr=67 pw=0 time=0.54)
|         1027 ............INDEX RANGE SCAN RA_CUST_TRX_LINE_GL_DIST_N1 (cr=3092 pr=31 pw=0 time=0.20)
|         3237 ..........TABLE ACCESS BY INDEX ROWID MTL_SYSTEM_ITEMS_B (cr=10640 pr=2668 pw=0 time=15.35)
|         3237 ...........INDEX RANGE SCAN MTL_SYSTEM_ITEMS_B_U1 (cr=2062 pr=40 pw=0 time=0.33)
|         3237 .........TABLE ACCESS BY INDEX ROWID OE_ORDER_LINES_ALL (cr=9804 pr=84 pw=0 time=0.77)
|         3237 ..........INDEX UNIQUE SCAN OE_ORDER_LINES_U1 (cr=6476 pr=47 pw=0 time=0.43)
|         3237 ........TABLE ACCESS BY INDEX ROWID MTL_PARAMETERS (cr=3239 pr=0 pw=0 time=0.04)
|         3237 .........INDEX UNIQUE SCAN MTL_PARAMETERS_U1 (cr=2 pr=0 pw=0 time=0.01)
|          741 .......TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=6476 pr=0 pw=0 time=0.10)
|         6474 ........INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=3239 pr=0 pw=0 time=0.03)Please help.
Regards
Ashish

|    254644500 ..NESTED LOOPS (cr=519939265 pr=34777 pw=0 time=3819.67)
|    254643758 ...NESTED LOOPS (cr=8921833 pr=29939 pw=0 time=1274.41)There is no way the optimizer should choose to process that many rows using nested loops.
Either the statistics are not up to date, the data values are skewed or you have some optimizer parameter set to none default to force index access.
Please post explain plan and optimizer* parameter settings.

Query Creation

Dear All ,
This is regarding Query Creation.
I want to create Query by Joinging Two tables.
I have created User Group, Created Infoset,
Now am creating Query by SQ01.
Going Step by step correctly.
I have Tick mark on Field group and selected .
Then By next screen i have marked for option for Parameter.
Then Clicked on "BasicList" Button.
Now after clicking Basic list button i am not getting screen of Basic list Line Structure
i.e Scrren with detais like with heading of type Field , Line ,Sequence, Sort Total etc. i am not getting.
Instead, After Pressing BasicList button i am getting screen like Query ...... layout Design.
So where /How cani get Scrren of Basic List Line struecture.
In which menu / option i have to check.
For Information we have SAP ECC 6. 0 with Application support Package no. 14.
PL help me for my probelm
Regards
Swati

Hello,
I got solution of my probelm.
Removed Tick Marked from Menu option Settings --> Setting -
> Here removed tick mark from Graphical Query Painter.
Thanks to all.
Regards
Swati

What does it mean when the usecounts of Parse Tree for a view is incrementing when a select query is issued against the view?

I'm using SQL Server 2008 R2 (10.50.4033) and I'm troubleshooting an issue that a select query against a specific view is taking more than 30 seconds consistently.   The issue just starts happening this week and there is no mass changes in data.
The problem only occur if the query is issued from an IIS application but not from SSMS. One thing I noticed is that sys.dm_exec_cached_plans is returning 2 Parse Tree rows for the view - one created when the select query is issued
1st time from the IIS application and another one created when the same select query is issued 1st time from SSMS.   The usecounts of the Parse Tree row for the view (the IIS one) is increasing whenever the select query is issued.  The
usecounts of the Parse Tree row for the view (the SSMS one) does not increase when the select query is issued again.
There seems to be a correlation between the slowness of the query and the increasing of the usecounts of the Parse Tree row for the view.
I don't know why there is 2 Parse Tree rows for the view. There is also 2 Compiled Plan rows for the select query.
What does the Parse Tree row mean especially the usecounts column?

>> The issue just starts happening this week and there is no mass changes in data.
There might be a mass changes in the execution plan for several reason without mass changes in data
If you have the old version and a way to check the old execution plan, and compare to the new one, that this should be your starting point. In most cases you don't have this option and we need to monitor from scratch.
>> The problem only occur if the query is issued from an IIS application but not from SSMS.
This mean that we know exactly what is the different and you can compare both execution plan. once you do it, you will find that they are no the same. But this is very common issue and we can know that it is a result of different SETting while connecting
from different application. SSMS is an external app like any app that you develop in Visual studio but the SSMS dose not use the Dot.Net default options.
Please check this link, to find the full explanation and solutions:
http://www.sommarskog.se/query-plan-mysteries.html
Take a look at sys.dm_exec_sessions for your ASP.Net application and for your SSMS session.
If you need more specific help, then we need more information and less stories :-)
We need to see the DDL+DML+Query and both execution plans
>> What does the Parse Tree row mean
I am not sure what you mean but the parse tree represents the logical steps necessary to execute the query that has been requested. you can check this tutorial about the execution plan: https://www.simple-talk.com/sql/performance/execution-plan-basics/ or
this one: http://www.developer.com/db/understanding-a-sql-server-query-execution-plan.html
>> regarding the usecount column or any other column check this link:
https://msdn.microsoft.com/en-us/library/ms187404.aspx?f=255&MSPPError=-2147217396.
Ronen Ariely
[Personal Site]    [Blog]    [Facebook]

40357-invalid string in example record query not issued

hello experts,
i am using forms 10g.in query mode i face that error 40357-invalid string in example record query not issued.
i used these code in key-next-item trigger
PROCEDURE KN_FOR_QUERY IS
BEGIN
IF :global.navigation = 'D' AND :global.mode = 'M'
THEN
IF NAME_IN(:SYSTEM.CURSOR_ITEM) IS NOT NULL
THEN
:global.temp_div_code:= :po_m.po_div_code;
:global.temp_po_num := :po_m.po_num;
:global.temp_po_ex_work := :PUR_DELV_D.DELV_EX_WORK;
:global.temp_modi_num:= :po_m.po_modi_num;
IF GET_BLOCK_PROPERTY(:SYSTEM.CURSOR_BLOCK,QUERY_HITS)=0
THEN
-- message('1---'||:SYSTEM.CURSOR_BLOCK);
-- message('2---'||:SYSTEM.CURSOR_BLOCK);
GO_BLOCK(:SYSTEM.CURSOR_BLOCK);
CLEAR_BLOCK(no_validate);
EXECUTE_QUERY;
-- ELSE
-- NEXT_ITEM;
END IF;
-- ELSE
-- mess(GET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM,PROMPT_TEXT)||' Must Be Entered For Query...');
END IF;
ELSIF :global.navigation = 'D' and :global.mode = 'Q'
THEN
IF NAME_IN(:SYSTEM.CURSOR_ITEM) IS NOT NULL
THEN
MESS('Press Execute query button');
go_item('tools.execute_query');
ELSE
mess(GET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM,PROMPT_TEXT)||' Must Be Entered For Query...');
END IF;
ELSIF :global.navigation = 'D' and :global.mode = 'A'
THEN
IF NAME_IN(:SYSTEM.CURSOR_ITEM) IS NOT NULL
THEN
NEXT_ITEM;
ELSE
mess(GET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM,PROMPT_TEXT)||' Must Be Entered...');
END IF;
END IF;
END;
Thanks
Ravi

Hi Ravi
u may need to debug to find out where and when the error exist pls note the following
Error Message: FRM-40357: Invalid string in example record. Query not issued.Error Cause:In query mode, you entered an invalid ALPHA or CHAR value in the example record.
Action:Correct the entry and retry the query. Level: >25
Type: Errorpls verifying that u r entering 1 char for global variable to be assigned so any number between 2single coat is considered a character not s number .
Amatu Allah

Session creation issues with DS3.2

We are using BODS 3.2 for development. We are aware that a newer version of DS has been released quite a long time ago but due to some reasons we are still using DS 3.2.
We are facing some session creation issues. We are using Teradata and Oracle as source and extracting\updating data using some SQLs in script tasks. SQLs are targeting huge amount of data. We executed a job and checked on the servers, sessions were created on the databases. Job kept on executing for long time and was not getting completed, there was no error also. After waiting so long, I checked on Database server and found that session was lost for these SQLs on Database servers. We are able to create a successful connection using Data Stores.
Please suggest something, Why the sessions are not getting lost on the database servers?.
Thanks & Regards,
Gaurav Bansal

ginger_11 wrote:
Hi...I'm new to the forum.
2 of the same phones in my household having similar issues since OS upgrade.
-Text automatically going to MMS when sending pics and the pics won't send. 1 phone freezes, the other acts like its sent but not sent-this phone won't load emailed pics either.
-Keep getting notifications that passwords need updated for email accounts.
-Facebook app won't load on 1 phone-tried deleting, pulling battery and re-installing. Still getting "session re log-in required" but there is nowhere to load the log-in info under accounts. Getting the same message on the other phone but the app is still listed under accounts so am able to log in.
-Both phones are randomly re-starting. Multiple times over past 3 days.
Any known issues like these?
There must be some common factor why both phones are having the same problem.
With the 10.2.1.537, the only problem I had was a few contacts merged and surnames were repeated.
I haven't noticed any difference with the latest upgrade.
Maybe a security wipe and restore contacts and email then one app at a time.

Query Throttling issue after increasing List view threshold in connected webpart

Dear SharePointers,
I have connnected listview webpart deployed on site. Parent webpart
has 16 fields and over 3,000 listitems exists in list. Child webpart has 7 fields and more than 30,000 Items. The code works well in other sites in same web app and it also works well in other systems. We tested same in other system by increasing/decreasing
data but still we are not able to replicate issue. I know that this issue could also encounter if fields are not indexed in the list. Are there any other pointers which can use to debug this issue.
Milan Chauhan
Regards,
Milan Chauhan
LinkedIn
|
Twitter | Blog
| Email

Hi,
According to your post, a Query Throttling issue occurred after increasing list view threshold in connected web part.
By default, this limit is set to 5,000 items for regular users and 20,000 items for users in an administrator role.
More information is here:
http://msdn.microsoft.com/en-us/library/ff798465.aspx
Please try to enable the Daily Time Window for Large Queries:
1.Go to Central Administration-> Application Management -> Manage web applications.
2.Select the web application that contains the large list.
3.Click General Settings, and then click Resource Throttling.
4.Under Daily Time Window for Large Queries, click to select Enable a daily time window for large queries.
5.Set a start time and duration when most of your users will not be working.
6.Click OK.
Best Regards
Dennis Guo
TechNet Community Support

Query Performace Issue-Usage of SAP_DROP_EMPTY_FPARTITIONS Program

Hi Experts,
We are facing query peroformance issue in our BW Production System. Queries on the Sales Multiprovider are taking lot of time to run. We need to tune the query perofrmace.
We need to drop the empty partitions at the database level. Have anyone of you used the program SAP_DROP_EMPTY_FPARTITIONS to drop the empty partitions ? If Yes, Please provide me with details of your experience of using this program. Please let me know, whether there are any disadvantages using this program in the Production System.
Kindly treat this as an urgent requirement.
Your help will be appreciated....
Thanks,
Shalaka

Hi Shwetha,
I think that pgm drops if partition contains no records(in DEL_CNT)
or if partitions requid is not in dimtab (DEL_DIM)
Hope it helps!
(and don't forget to reward the answer, if you want !)
Bye,
Roberto

Site Creation Issue.

We had a user report a site creation issue with their site. They had been able to create sites with no problem up to this point. But now, when attempting to crate a site they get an error "User can't be found". But if they create a blank site
I or a blank team workspace. The site creates without incident. Any idea? The permissions appear to be correct but they can't create anything but blank sites without receiving the error. Maybe check permissions to webparts and templates (Do you know where
I could do that)?

Hi,
Did you mean create site collections in the CA?
Did the users have admin permission or other permission? You can use the admin account to check whether it works.
To narrow down the issue, you can use other web application to check whether it works.
Maybe the web application had been corrupted.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Materialized view creation issue

I am running into an issue and trying to ascertain issue.
Scenario:
I have 2 MV creation scripts. The MV is supposed to get populated by connection from schema to another schema USING DB Links.
Basically, SAME HOST, SAME RAC DATABASE, just separate schemas.
The MV creations are just hanging. I see NO alert log mentions. I ran a SQL trace and yes, I see:
call count       cpu elapsed       disk query    current        rows
Parse 0      0.00 0.00 0          0 0           0
Execute   1011 1.40 73.80 0 0 0           0
Fetch 1010      1.08 317.57 0 0 0        1010
total 2021      2.49 391.38 0 0 0        1010
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 109     (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to dblink 2022 0.00          0.00
SQL*Net message from dblink 2021 0.46        242.58
Understandable, but when I do a selective query, the results come back pretty much within 5 seconds.
DB version is 11.2.0.3.   Is there a BUG that I should know about?
Here is a snippet:
CREATE MATERIALIZED VIEW "SCHEMA"."MV_NAME_MV" USING INDEX REFRESH COMPLETE ON DEMAND AS (SELECT distinct mapguide_persons(pl.location_code) "FULL_NAME_COSTCENTER",
mapguide_jobemp(pl.location_code) "TRUNCNAME_JOB",
mapguide_empnum(pl.location_code) "FULLNAME_EMPNUMBER_PHONE",
mapguide_english(pl.location_code) "ENGLISH_NAME_COSTCENTER",
pl.function_type_lookup_code "FUNCTION_TYPE_LOOKUP_CODE",
pl.location_code "LOCATION_CODE",
pl.org_id "ORG_ID"
FROM [email protected] pl
WHERE pl.function_type_lookup_code not in ('VALUE','CONSULT')
and sysdate between pl.active_start_date and active_end_date);
*Network netstat –in output **
netstat -in
Kernel Interface table
Iface       MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0       1500   0 58751025      0 0      0 27335255 0      0      0 BMRU
eth0:1     1500 0      - no statistics available - BMRU
eth0:2     1500 0      - no statistics available - BMRU
eth1       1500   0 5569305513      0 0      0 4365204661 0      0      0 BMRU
eth2       1500   0 146061981      0 0      0 270589939 0      0      0 BMRU
eth2:1     1500 0      - no statistics available - BMRU
lo 16436   0 31731571 0      0      0 31731571      0 0      0 LRU
The above just hangs and spins its wheels…
Any ideas are appreciated…
thanks

JCGO wrote:
The above just hangs and spins its wheels…
And what happens when you issue just the underlying select:
SELECT distinct mapguide_persons(pl.location_code) "FULL_NAME_COSTCENTER",
mapguide_jobemp(pl.location_code) "TRUNCNAME_JOB",
mapguide_empnum(pl.location_code) "FULLNAME_EMPNUMBER_PHONE",
mapguide_english(pl.location_code) "ENGLISH_NAME_COSTCENTER",
pl.function_type_lookup_code "FUNCTION_TYPE_LOOKUP_CODE",
pl.location_code "LOCATION_CODE",
pl.org_id "ORG_ID"
FROM [email protected] pl
WHERE pl.function_type_lookup_code not in ('VALUE','CONSULT')
and sysdate between pl.active_start_date and active_end_date
SY.

Sql query cache issue

I am trying to see the log file in Manage sessions for the sql query in Answers. I see that if we run the same report multiple times, the sql query is showing up only the first time. Second time if I run it is not showing up. If I do a brand new report with diff columns picked it is giving me the sql then. Where do I set this option to show the sql query everytime I run a report even if it is the same report run multiple times. Is this caching issue?

It shouldn't.... Have you unchecked the "Cache" on the physical layer for this table? If you go onto the Advanced tab, is the option "Bypass the Oracle BI cache" checked?

Query Creation Issue

Similar Messages

Maybe you are looking for