Query designer problem
Dear All,
I am facing the problem in the query designer that when i edit any of the formula in the query it allows me but when i edit it second time , it wont allow me and throws a following exception...
"An unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will be shut down immediately.
Object reference not set to an instance of an object."
and in details of the exception the following comes...
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
System.NullReferenceException: Object reference not set to an instance of an object.
at com.sap.bi.et.QueryDesigner.QDbPoolEditSelection.Get()
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.EditFormula(IQDView iSelectedView)
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.ExecuteCommand()
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ExecuteDoubleclickCommand(ParentBarItem iContextMenu)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.NodeDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.OnItemDoubleClick(EventArgs iE)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.NodeDoubleClickHandler(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnDoubleClick(EventArgs e)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.OnDoubleClick(EventArgs e)
at com.sap.bi.et.QueryDesigner.QDiTree.OnDoubleClick(EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message& msg)
at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message& msg)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
BExQueryDesignerStarter
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerStarter.exe
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExQueryDesigner
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesigner.DLL
BExCommon
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommon.DLL
BExControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls.DLL
BExCAControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCAControls.DLL
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
BExCommunication
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommunication.DLL
Microsoft.VisualBasic
Assembly Version: 7.0.5000.0
Win32 Version: 7.10.6001.4
CodeBase: file:///c:/windows/assembly/gac/microsoft.visualbasic/7.0.5000.0__b03f5f7f11d50a3a/microsoft.visualbasic.dll
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
8mfr2iet
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
SAP.Connector
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector/2.0.0.0__50436dca5c7f7d23/sap.connector.dll
Interop.SAPLogonCtrl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SAPLogonCtrl.DLL
SAP.Connector.Rfc
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector.rfc/2.0.0.0__50436dca5c7f7d23/sap.connector.rfc.dll
BExGeneratedAll
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExGeneratedAll.DLL
System.Web.Services
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.web.services/1.0.5000.0__b03f5f7f11d50a3a/system.web.services.dll
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
System.Web
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system.web/1.0.5000.0__b03f5f7f11d50a3a/system.web.dll
nwibr-hj
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
orv3kyon
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
3wroaodz
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
uzyztof1
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
bmpxtf3w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExControls2
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls2.DLL
BExSharedImageList
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSharedImageList.DLL
System.Runtime.Serialization.Formatters.Soap
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.runtime.serialization.formatters.soap/1.0.5000.0__b03f5f7f11d50a3a/system.runtime.serialization.formatters.soap.dll
BExSelectorAPI
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.202
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSelectorAPI.DLL
System.Data
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.data/1.0.5000.0__b77a5c561934e089/system.data.dll
BExOpenSaveServices
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.108
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExOpenSaveServices.DLL
Syncfusion.Tools.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Tools.Windows.DLL
Syncfusion.Shared.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Base.DLL
Syncfusion.Grid.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Windows.DLL
Syncfusion.Core
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Core.DLL
Syncfusion.Grid.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Base.DLL
Syncfusion.Shared.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Windows.DLL
Accessibility
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/accessibility/1.0.5000.0__b03f5f7f11d50a3a/accessibility.dll
AxInterop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/AxInterop.SHDocVw.DLL
Interop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SHDocVw.DLL
Syncfusion.Edit.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Edit.Windows.DLL
ezadp-o7
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
czxpebds
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
ws48wlef
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
nbphnkyi
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
qmxat26w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExFormulaParser.DLL
RegexAssembly140_0
Assembly Version: 0.0.0.0
Win32 Version: n/a
CodeBase:
System.Design
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.design/1.0.5000.0__b03f5f7f11d50a3a/system.design.dll
BExQueryDesignerFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.2
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerFormulaParser.DLL
JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
Please anybody help me.
Nitesh
Hi,
This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
'REMOVE SAP FRONTEND'
- Install the newest frontend and GUI patch and check the installation with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 918394 and ensure there are no errors.
Path for frontend patches
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply latest frontend patch
Once the installation is done run the installation check file as per note 918394 and ensure that there are no red flags.
Rgds
Manoj Kumar
Similar Messages
-
Query designing problem while applying cell properties
Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
NiravHi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav -
Query designer problem with SAP GUI 7.10
I recently installed the SAP GUI 7.10 and when I'm going to apply or remove a filter in any characteristic, this error is shown :
<b>----
BEx Query Designer
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
OK
</b>
Anybody knows what to do?
Tnks in advance.I had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob -
BEx Query Designer problem when generate URL to IE
Hello everyone,
When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
And IE display that "The address is not valid".
I think the reason is that there are some configuration not do.
Could any guys tell me what configuration should be done ?
Thank you!
BR,
LouisHi,
I think the Bex service is not confirgured correctly in your system.
For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
Refer to the hot to document on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
Regards,Shilpa -
Hello I am trying to build a Query .
I am facing problem . I want it following way in Columns = Keyfigure
Net volume (User entry period range)------Net volume (period range for previous year)
So user should select only once the period range for first net volume and it should give the result for both selected period range and same period for previous year.
How to do this.???
Points will be awardedHi there,
Put your key figure in the columns, then double click it which opens up a selection box. Bring the time parameter (Fiscal Period) over into the selection from the Dimensions options in the left hand panel.
Put the variable on Fiscal Period which prompts the user for the time.
Click OK.
This lets you combine a characteristic and a key figure in the one selection.
Now copy and paste the key figure/(selection. On the version you have pasted, double click it to open up the selection box. Select Restrict on the Fiscal Period, when the Selection for Fiscal Period opens up, you will see the variable you have selected on the right hand side of the dialogue box. Right mouse click it and select Specify Variable offset. If you want the second period to go back one month, enter -1, if you want it to go back a year select -12.
Regards
Gill -
I have the following requirement:
Cube A has CHAR1, CHAR2, CHAR3, VALUE1, VALUE2, CALDAY
For a query I want:
Rows: CHAR1, CHAR2
Columns: VALUE1, VALUE2, X
X should be equal to the number of different occurences of CHAR3 (for each CHAR1, CHAR2 combination). I can have for the same CHAR1,CHAR2,CHAR3 combination a lot of records (with diferent CALDAY), but I only to count each different CHAR1,CHAR2,CHAR3 combination. For example with facts table:
A, B, C, 20, 10, 01.01.2008
A, B, D, 10, 20, 02.01.2008
D, E, F, 5 , 15, 01.01.2008
D, E, F, 10 , 20, 02.01.2008
G, H, I, 5, 20, 01.01.2008
The output should be:
CHAR1 CHAR2 VALUE1 VALUE2 X
A B 30 30 2
D E 15 35 1
G H 5 20 1
Can I do this with a query?
TksProblem is solved by adding a counter key figure X with exception aggregate on 0CALDAY.
-
Hi All
I try to see Bex Queries in Business Objects Designer. Bex 7.0
Trouble : I try to click on the click box : Allow external queries in the Tab More (sorry I have them in German, so the translation is not perfect)
and the click box is greyed (disabled)
Any help will be welcomed
Thanks in advance
VinceHi Santosh
Thanks for your reply regarding the Business Query Designer Problem. I'm taking charge of the issue made by Vincent_BO.
I think you missunderstood our Problem.
It has nothing to do with the Language Configuration. When we create a new Query in Query Designer, it is possible to cross the Flag: "Allow External Access for this Query" under the right Panel: Options, register: advanced. ->please give me your email adress to send you the print screen of this configuration. Or is it possible to add a picture to this forum?
Now the problem is:
When we open an existing Query (from Bex) this Flag is disabled. (Please have a look on the following print screen again)
How can we enable this flag? we allready tried to copy a existing Query but the flag is still disabled. Is it possible to change this configuration directly on the database? which field in wich table would this be?
Thans so much for your help!!
Yves -
Problem with Queries Structures in Bex Query Designer and Universe Designer
Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
- (Characteristic Restrictions) Reg Guayana
> (InfoObject) 0Product = 'XXX'
> (InfoObject) 0Country = 'YYY'
- (Characteristic Restrictions) Reg Caracas
> (InfoObject) 0Product = 'AAA'
> (InfoObject) 0Country = 'BBB'
Rows
(Structure) ZSRT_456
(Key Figure) Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure) Net Sale
(Class) ZSRT_123
>(Dimension) ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier -
Problem loading Query Designer Add-in
Hi All,
Can anyone please help me on my below issue.
Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
Thanks in advance.
Regards
VishalHi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted. -
Problem with Variable in Query Designer.
hi all,
we have a variable ZAMREG on characteristic AM Region, where AM region is attribute for two different master data objects mastobj1 and mastobj2, we have different infosets build on these two master data objects along with some other ODS.
now this variable ZAMREG is visible in one of the infosets only in query designer, whereas it is not visible in the other infoset.
what could be the problem??
thanks,
RkHi,
Please check if that variable is created locally or globally. If it is a local variable in any query, it will not appear in any other query.
In anyways, you can always create one more variable if the older one is not available. This will not make much of difference. I would suggest go ahead with creating a new variable.
Regards,
Yogesh -
0ORGUNIT hierarchy version assignment problem using BI7 Query Designer
Dear All,
I have a problem with Hierarchy Version for 0orgunit using BI7.0 Query Designer.
for activating heirarchy i have selected the hierarchy in the query designer but version it is not showing , instead of 01 it is showing as #.
what may be the problem with BI7.0 Query designer.
If I use BW3.5 query desingner there version in showing and I can able to show the heirarchy.
We are using BI7.0 and SP level is 13.
Best Regards,
SGKDear SGK,
did you get this problem solved ?
I have the same problem.
Regards,
Gerhard -
Problem in Query Designer Tool Bar
Hi
In BI 7.0, Query Designer Tool Bar unable to see Table View. Is their any patch problem ?.
Thanks in advance
Mahesh.OSS note: 1002271.
Reason and Prerequisites
After much discussion we have decided
not to include the table mode in BI 7.0.
Solution
There is (in our opinion) a better alternative to the table view:
Create a query with only one structure and use
Report Designer to design your own table view. This allows you
to arrange the columns and many other
formatting and grouping options as you wish. -
Problem Opening a query in query designer
Hi Friends,
I am trying to open an existing query in the Query designer, but im getting a message " Bex Transport request is not available or not suitable". I have assigned a package transport request to the package, even after that im still getting this message.
Can anyone please let me know where am i going wrong?
Your help is verymuch appreciated.
Regards
BNHi,
The transport request of the query was moved to QA.Basically,
BEx query should be in transport request.Then only you can edit it.
So collect the query in transport request. It will solve your problem.
Regards,
Saran -
Hi All,
I had created a query and started designing a crystal report.
But after designing the report, i came to know that some infoobjects are missing in the query.
So i went to query designer and added the corresponding infoobjects inorder, they could reflect while designing my crystal report.
But when i have reopened the report the field explorer is not showing the infoobjects which i have added newly.
In crystal reports what is the way to obtain those objects which are newly added to the query.
Even i have refreshed the field explorer many times but still it is not showing the updated objects.
But if i go creating a new report on the same query, there it is showing the added objects as well.
Only for the new report i could able to see the newly added objects in field explorer but not for the old report.
Please let me know the solution for this problem ASAP.
Best Regards
JitenJiten,
i think if you click Database--->Verify Database and also try Set datasource location -
>Update.
this should do the trick.
Regards
Jehanzeb -
BEx Query Designer Opening Problem
Hi Guys,
I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
Component 'BEx Query Designer': available version 154, version 229 required.
Before you can continue you have to run the front-end setup.
please let me know to resolve this issue.
Thanks
MuraliHi Murali,
To make sure it works, you should make sure that:
When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
Install the latest front end patch (BI patch 7) from SAP Marketplace
I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
It works pretty well for us, I am sure you will also eventually make it work
hope this solves ur problem....
Regards,
Bala...
Maybe you are looking for
-
N97:Ovi Maps crashes after a few seconds
On N97 I had Ovi maps working like a breeze for some weeks now. All of a sudden I see this behaviour. Open Ovi Maps, see the main page, click on My Location the map appears a message about connecting might cost you something and the Ovi Maps disappea
-
Connecting firewire disk causes coreaudio to crash
I have a Western Digitial "my book" firewire drive which worked perfectly under Tiger. I just upgraded to Leopard, after waiting a few months to make sure the early bugs got worked out. I guess I was premature in upgrading? Has anyone else seen the f
-
Adding multiple separators in combo box
i want to add multiple separtors in my combo box items but i can add - Value in the items list only once so i get only one separator, how can i add multiple separators in combo box items Tushar Jambhekar [email protected] Jambhekar Automation Solutio
-
8520: problem to update OS 5
Hello No possible to move my 8520 to OS5 Desktop offers me only OS4-6 or older version the same when I try updating online thank you for any help or tutoriel or information
-
Error in maintaining data in V_T510P Premium table
Hi All, When I try to maintain the data in maintenance view V_T510P, it is giving an error message "Entry USD does not exist in T500W - check your entry". Though currency maintained in table T500W, still the error comes. Please help. Regards, Jeetu