Query editing in Management Studio

I've accidentally done something to my install of Management Studio that is making query editing very difficult. I must have used a weird key combination to enable some feature that is now opening an Intellisense like window with suggested keywords
or column names. I've tried every option I can find to disable this and even tried all the <ctrl> key combinations from A-Z to try to turn this off. Can anyone tell me how to have the editor revert to the "default" behavior as installed?
I've received several replies about disabling Intellisense or changing the Intellisense options and I've already done this to no effect. I've also not installed any 3rd party tools. I was editing queries when the problem began and I think I had
hit a <ctrl> or <alt> key combination key that started this problem.
I took a screen shot but when I hit the <ctrl> key, the options fade out but hopefully it can still be seen.

I've accidentally done something to my install of Management Studio that is making query editing very difficult. I must have used a weird key combination to enable some feature that is now opening an Intellisense like window with suggested keywords
or column names. I've tried every option I can find to disable this and even tried all the <ctrl> key combinations from A-Z to try to turn this off. Can anyone tell me how to have the editor revert to the "default" behavior as installed?
My guess is that you have installed any third party SQL-Server plug in and which is active. Click on Tools and check if it shows any add-on is there. You need to uninstall it from Control Panel then.
Cheers,
Vaibhav Chaudhari
MCP, MCTS, MCSA (SQL Server 2012)

Similar Messages

Query runs in management studio but not in SQLAgent job

I have the following query which runs fine in Management Studio but when I put it in a SQLAgent job it fails saying
Error formatting query, probably invalid parameters (SQLState 42000 Error 22050)I have tried changing Quote characters but to no avail.
Does anybody have any idea why this would be happening?
Regards
Ron
declare @servername nvarchar(150)
set @servername = @@servername
declare @mysubject nvarchar(200)
set @mysubject = 'Toners adjusted out '+@servername+'.'
EXEC msdb.dbo.sp_send_dbmail @recipients='[email protected]',
@subject = @mysubject,
@body = 'Toners were adjusted out. View attachment to see the details',
@query = 'use livedatabase;select trc_part, trc_job, trc_qty, trc_inits from livedatabase.dbo.Traces
where trc_part like "TONER%"
and CAST(trc_date as date) = CAST(getdate() as date)
and trc_typ = "O"',
@query_result_width = 600,
@attach_query_result_as_file = 1

I have another SQLAgent job that is almost identical in what it does, ie sending an email with a query result and it works fine. See below.
Therefore it can't be permissions or dbmail setup but I cannot see what it is.
--== This is for SQL 2005 and higher. ==--
--== We will create a temporary table to hold the error log detail. ==--
--== Before we create the temporary table, we make sure it does not already exist. ==--
IF OBJECT_ID('tempdb.dbo.ErrorLog') IS Not Null
BEGIN
DROP TABLE tempdb.dbo.ErrorLog
END
--== We have checked for the existence of the temporary table and dropped it if it was there. ==--
--== Now, we can create the table called tempdb.dbo.ErrorLog ==--
CREATE TABLE tempdb.dbo.ErrorLog (Id int IDENTITY (1, 1) NOT NULL,
logdate DATETIME, procInfo VARCHAR(10), ERRORLOG VARCHAR(MAX))
--== We create a 3 column table to hold the contents of the SQL Server Error log. ==--
--== Then we insert the actual data from the Error log into our newly created table. ==--
INSERT INTO tempdb.dbo.ErrorLog
EXEC master.dbo.sp_readerrorlog
--== With our table created and populated, we can now use the info inside of it. ==--
BEGIN
--== Set a variable to get our instance name. ==--
--== We do this so the email we receive makes more sense. ==--
declare @servername nvarchar(150)
set @servername = @@servername
--== We set another variable to create a subject line for the email. ==--
declare @mysubject nvarchar(200)
set @mysubject = 'Deadlock event notification on server
'+@servername+'.'
--== Now we will prepare and send the email. Change the email address to suite your environment. ==--
EXEC msdb.dbo.sp_send_dbmail @recipients='[email protected]',
@subject = @mysubject,
@body = 'Deadlock has occurred. View attachment to see the deadlock info',
@query = 'select logdate, procInfo, ERRORLOG from tempdb.dbo.ErrorLog where Id >= (select TOP 1 Id from tempdb.dbo.ErrorLog WHERE ERRORLOG Like ''%Deadlock encountered%'' order by Id DESC)',
@query_result_width = 600,
@attach_query_result_as_file = 1
END
--== Clean up our process by dropping our temporary table. ==--
DROP TABLE tempdb.dbo.ErrorLog

SSIS query returns no results - same query in SQL management studio works

Hello,
I'm running a very simple join to get a result set:
SELECT dbo.sap_contracts.svc_id, dbo.sap_contracts.svc_code, dbo.sap_contracts.quantity, dbo.sap_contracts.start_date, dbo.sap_contracts.end_date
FROM dbo.sap_contracts
INNER JOIN dbo.contracts
ON dbo.contracts.contract_id=dbo.sap_contracts.contract_id
where customer_name='XXXXXXXXX'
When I run this in SQL management studio it works fine and returns the list of existing "SAP contracts" in the DB (to compare to the customer's contracts actually in SAP).
In SSIS (SQL 2012) I'm using an Execute SQL task to run this query and putting the full results set into a variable of type "object". I've done very similar things before and it worked fine. With this query in SSIS I get no results at all. Changing
the variable type to "string" throws an error showing that the type being written to the variable is "DBNull" - so it seems that the query in SSIS returns no records, when in SQL management studio I get the 15 records that should be returned.
Does anyone have any ideas of what could be wrong?
Cheers
Mark

There are several connections to the DB in tasks before this one, and the task after this is a whole load of C# in a script task doing SOAP communications to the SAP ERP system to compare the result set from this SQL with the contracts in SAP ERP for the
specific customer.
Input variables are all correct (I've checked them about 15 times now with breakpoints on just about every task in the whole package) and I'm at the point of having to test everything in an attempt to see exactly what query is being sent to the SQL server
and anything else I can do to see why nothing comes back. There is a almost complete lack of debugging tools in SSIS which doesn't make life any easier (something I've heard quite a few times in various forums).
I'm tearing my hair out on this for half a day now and it's not funny any more, so apologies if I come across as a little frustrated.
Cheers
Mark

SQL Server Agent not appearing in Management Studio

Hi there,
I have SQL Server set up on a server and I can't see the Agent in Management Studio.
When I check the services it says it is there and started.
I have the Enterprise edition installed.
Funny thing is it doesn't show when I am on the server itself through Management Studio, however, on my local pc, when I connect to the server through Management Studio, I can see the Agent through there and I have jobs there that run successfully and everything.
Its just when I log directly on the box and load up Management Studio, I don't see it.
Any thoughts?
Thanks!

a) Is there a possibiity that you are using SQL Server Management Studio Express edition, on your server instead of (full or complete edition of management studio that came with SQL enterprise edition media)
one way to tell if you are using sql express studio is under management you will be missing Resouce Governor under management node, Resource governor mangeability feature is only available if you have install management studio that comes with an enterprise
edition only
OR
b) account under which you are logged in your server does not have privileges to view SQL Server Agent (the user need to be member of certain role in msdb database to view sql agent see
http://msdn.microsoft.com/en-us/library/ms188283.aspx )
c) When you installed SQL managment stuido, which option did you choose for management studio (Basic or Complete)..?

SQL Server 2012 Management Studio Displays Error With "New Query" and Intellisense Works Intermittenly

I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day.  This is x64 machine.
Microsoft SQL Server Management Studio      11.0.2100.60
Microsoft .NET Framework      4.0.30319.261
Operating System      6.1.7601
Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly.    The problem mayhave been cuased by a configuration change or by the installation of another extension. You can get more information by running the
application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'. Continue to show this error message?
Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything. I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped. Also
tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either.

Hi WallyJim,
For your first problem, possible workaround:
In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
For more information, please refer to
https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
For your second problem, the following conditions might affect the behavior of IntelliSense:
There is a code error above the cursor.
The insertion point is inside a code comment.
The insertion point is inside a string literal.
The automatic options are turned off.
For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
http://msdn.microsoft.com/en-us/library/ms173434.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

SQL query generating data in SQL management studio but not in CUIC interface

Hello,
I'm working on a UCCE 9.0 system
I created SQL query for a report.
Whenever I run the query inside the SQL management studio, it works and generates data, but when I run it in the CUIC interface it works but generates nothing. As you can see in the below snapshot, it contains 209 records that are not being displayed.
Any help would be greatly apprciated

Is it a custom report ? Can you right click on your Custom Report and click on Edit Views. You need to check whether you have Grid Headers Listed.
Regards,
Senthil

How to find a record then edit using sql server management studio

Hello,
A very basic question:
I want to find a record stored in MS SQL Server 2008 express database table then edit the record.
I tried to do it using SQL Server 2008 management studio express because I have been using MS Access database all the time. I have right clicked the table in management studio, clicked the "Edit top 200 records" menu item then when records were
displayed on the result pane, I pressed Ctrl + F key to find a student named Simon for example. Well, nothing happened. I couldn't see any dialog boxes for putting in the search criteria.
I guess I cannot simply use Ctrl+F in SQL Server management studio to find / edit a record.
Can someone please teach me how to find a record specifying a search criteria then edit the record in SQL server management studio?

Hi ZKM128,
I have not seen Ctrl+F to be used to look for desired rows in Sql server.
On the result pane after you selected "Edit top 200 records", just right click , select
PANE, SQL, you will get the T-Sql query t,here you need to mention the exact criteria which you are looking for, and then you will get the desired rows and then you can edit.
Thanks
Manish
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

Which SQL Server Edition support how many sessions to the instance from SQL Management Studio on the client side

Hi,
I'm looking for some help on the below query to verify which version of sql server edition supports multiple or N number of sessions to the SQL server Instance using the SQL Server Management Studio tool from the client side.
SQL Standard Vs Enterprise.
your urgent help is much appreciated.
Br.

Hello,
See Maximum Capacity Specifications for SQL Server =>
User connections = 32,767; and this value is independent of use SQL Server Version, edition or the used tools, like SSMS in your question
Olaf Helper
[ Blog] [ Xing] [ MVP]

Auto Scheduled run of the Sql server management studio or a auto refreshing query

Hi ALL ,
This is a very different weird requirement but workaround for one of my requirement . Scenario is that sql server enterprise edition is installed on a vm . I create a session with the vm using the remote desktop . I have scheduled a ssis package
on the server and it should run 4 am daily us timing but its failing . If in case a user is connected to the management studio package runs on time . So i have to disconnect from the remote desktop and its not possible for me to login at 4 am every day for
running package.
Requirement : Is it possible that the sql sever management studio automatically turns on at 03:30 am and authenticates in .If that is possible my package won't fail . If this is not possible is it possible that sql script auto refreshes every
30 min's so what i can do i will run the auto refreshing script in the management studio once and will disconnect the remote desktop not the sql server session so my virtually my session on vm will end but vm is always on from the vcenter and there is some
activity on the sql server management studio so even the application won't be closed after a stipulated time frame leading to running of my package on time.
Please help

Hi Latheesh NK ,
Below is the error message SSIS one i extracted from the history :
Date       3/8/2014 11:00:00 AM
Log       Job History (SSIS package)
Step ID       1
Server        xyz\xyz
Job Name       SSIS package
Step Name       Package
Duration       00:00:01
Sql Severity   0
Sql Message ID   0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted   0
Message
Executed as user: xyz\Administrator. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 11:00:00 AM Error: 2014-03-08
11:00:01.31     Code: 0xC0208449     Source: Data Flow Task 1 Source - Query [95]     Description: ADO NET Source has failed to acquire the connection {68D5B1D7-17B1-4F95-9B1D-7615425C4A07} with the
following error message: "ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". End Error Error: 2014-03-08 11:00:01.31     Code: 0xC0047017     Source:
Data Flow Task 1 SSIS.Pipeline     Description: Source - Query failed validation and returned error code 0xC0208449. End Error Error: 2014-03-08 11:00:01.31     Code: 0xC004700C     Source:
Data Flow Task 1 SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-03-08 11:00:01.31     Code: 0xC0024107     Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 AM Finished: 11:00:01 AM Elapsed: 0.406 seconds. The package execution
failed. The step failed.

Management studio error while creating/editing maintenance plan

Hi,
I had MS SQL 2012 enterprise edition installed and everything was working fine. Later I removed MS SQL 2012 and re-installed. Now when I am trying to create maintenance plan I am getting below error. When I click Yes system allows me to go through the maintenance
plan wizard and create new plan but when I want to edit it give me same error and it doesn't open screen to edit the plans. Can you please provide solution to below error?
Microsoft SQL Server Management Studio
The 'Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' package did not load correctly.
The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by running the application together with the /log parameter on the command line, and then examining the file 'C:\Users\pac\AppData\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'.Continue
to show this error message?
Yes No
I tried repair option from MS SQL 2012 setup but it didn't solve the problem. This is my production system and it has TFS 2013 and it's database. Please let me know how severe this problem is? Is it something to be worried about in future? How do I solve
this error?
Regards, Premal Acharya

Hi Michelle,
Thanks for your reply. I resolved this issues yesterday by installing SQL Server
Management Tools Complete. I suspect that
Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration
DLL files were having issues. When I searched my system I could only find Microsoft.DataTransformationServices.VsIntegration.DLL and
Microsoft.DataTransformationServices.VsIntegration.DtsPackage.DLL file was missing.
When I re-ran the MS SQL setup to add new feature I selected Management Tools Complete and after installation this error was resolved. Though this has solved the issue for now I feel the error shouldn't have come with Management Tools -
Basic installation as I had installed MS SQL Server before with Management Tools - Basic and it had worked without any issues.
For now this issue is resolved but it will be of good help if I can know the cause of this error and what could be the possible solution.
Thanks.
Regards, Premal Acharya

SQL Server 2012 Management Studio: XML XQuery-query the XML Blob using CTE: How to specify the coorelation name in bulk rowset?

Hi all,
I just started doing the XML Xquery programming in my SQL Server 2012 Management Studio. I executed the following code:
--query the XML Blob using a CTE (pulling from the XML file each time) Products
WITH XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) ) AS XmlData
SELECT *
FROM XmlFile
GO
I got the the following Msg:
Msg 491, Level 16, State 1, Line 4
A correlation name must be specified for the bulk rowset in the from clause.
How can I specify the correction name for the bulk rowset in my project?
Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hello Scott,
You have to assign a table alias for the OPENROWSET =>
--query the XML Blob using a CTE (pulling from the XML file each time) Products
WITH XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) AS MyXML ) AS XmlData
SELECT *
FROM XmlFile
GO
Olaf Helper
[ Blog] [ Xing] [ MVP]

Setting query timeout in Microsoft SQL Server Management Studio

Hello,
We have several power users with access to SQL Management studio. They use it to write SQL queries. Realize there are other ways to access the db -- but we're stuck giving them Management Studio so no working around that issue.
My questions is how can we prevent them from locking up TempDB by writing poor SQL statements. Goal is to make them 'time out'. I have gone to Tools-->Options-->Query Execution--> SQL Server --> and set Execution time-out. Tested
this on my computer and this did NOT work. Set it to 15 seconds. Then, wrote a SQL statement (by clicking 'New Query') that took > 15 seconds and it ran successfully. Does anyone know why this setting did not carry over?
Any other thoughts on how to accomplish this would be appreciated.
Thanks,
Dan

I would have disconnected and reconnected, instead of just clicking New Query.
"Premature optimization is the root of all evil." - Knuth
If I provoked thought, please click the green arrow
If I provoked Aha! please click Propose as Answer

Can not connect the database via query string (C#). The SQL Server Management Studio is showing the full path of a location instead of database name.

I can not connect to the database via C#. The database is showing full path of the database file instead of the database name. See the pic: a database showing only name 'emart' and the other database showing the full path.
: Robby

Hi,
According to your post, I know that the database name is showing file path of the database rather than the database name in SQL Server Management Studio. You were not able to
establish a connection to the database using C#.
As Olaf said, was any error message thrown out when the connection failed? How did you create these databases?
You can use the following T-SQL to attach the database and see if the issue persists.
CREATE DATABASE
databasename
ON (FILENAME = 'filepath _Data.mdf'),
(FILENAME = 'filepath_Log.ldf')
FOR ATTACH;
Thanks.
Tracy Cai
TechNet Community Support

Cannot open table in sql server management studio express

Hello all.
I have uploaded a table into sql management studio express. However, when I right click on the table and try and open it, I get an error message saying;
"SQL Execution Error.
Executed SQL statement: select columnName1, columnName2 etc....
Error source: Microsoft. VisualStudio.DataTools
Error Message: Exception has been thrown by the target of an invocation"
Because of this error, I cannot manually edit the table. However, when I write a query running select * from Table X, the table does appear that way.
Any help regarding how to open the table would be very much appreciated!!

have uploaded a table into sql management studio express. However, when I right click on the table and try and open it, I get an error message saying;
"SQL Execution Error.
Executed SQL statement: select columnName1, columnName2 etc....
Error source: Microsoft. VisualStudio.DataTools
Error Message: Exception has been thrown by the target of an invocation"
Because of this error, I cannot manually edit the table. However, when I write a query running select * from Table X, the table does appear that way.
Any help regarding how to open the table would be very much appreciated!!

Management Studio Crashing When Adding SSIS Step to SQL Agent Job

Hi
I am running Windows Server 2012, SQL Server 2012 SP2 CU2, SQL Server Management Studio 2012 and Visual Studio 2012.
I have existing SQL Agent Jobs that run SSIS packages and they all currently work. However, if I try to edit them or add a new job that uses a SSIS package Management Studio will crash. I was having this problem a couple weeks ago when I was still
on SQL Server 2012 SP1 CU9, so I updated to SQL Server 2012 SP2 CU2 and the problem went away for a couple weeks and I was able to add new SQL Agent jobs that run SSIS packages. But now it issue is back and there are no new updates to try and fix it.
Has anyone seen this before and found a reliable fix to it?
Steps to cause crash:
1) Open new SQL Agent Job
2) Select Steps and add a New Step
4) Change the job type to SQL Server Integration Services Package.
5) SSMS Crashes
Error Message Below:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ComboBox.WmReflectCommand(Message& m)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.Control.SendMessage(Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.Control.ReflectMessageInternal(IntPtr hWnd, Message& m)
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.Control.DefWndProc(Message& m)
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()
at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.newJobStep_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()
at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
at _getFiberPtrId()
at <CrtImplementationDetails>.LanguageSupport._Initialize(LanguageSupport* )
at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
Thanks,
Anthony

I ended up being able to work around this without having to recreate everything on a Windows Server 2008 R2. I did this by setting up an azure point to site VPN from
my computer to the Windows Server 2012 hosted on azure. I was then able to connect SSMS from my computer to the Azure VM allowing me to create and edit new SQL Agent jobs that run SSIS packages. Here are the steps to do this
1) Connect to the VPN from another machine besides the server.
2) Open SSMS using the runas.exe command with the Domain\User Name of a Windows account on the server.
- Ex. Runas.exe /netonly /user:DOMAIN\USER "C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Ssms.exe"
2) Connect to the VM's Database Engine using its internal IP address and the port that SQL Server is listening on (default is 1433) and a SQL Login
setup on the server.
-Ex IP, 10.0.0.1,1433
3) Create a new job with the type SQL Server Integration
Services Package. Select the package source (SSIS Catalog). I could not get the server to be automatically discovered here so enter the server’s internal IP address and select the package you want to run.
4) Right click the new SQL Agent Job and choose Script Job As, CREATE To, New Query Window. This is the script to create the
SQL Agent Job and it needs to be edited to contain the Name of the server on the internal IP address that was used earlier.
5) Edit the @command= line of the script to use the server name. Change the highlighted part below to the server name.
- Ex . @command=N'/ISSERVER "\"\SSISDB\PACKAGELOCATION\"" /SERVER
"\"10.0.0.1\"" /Par "\"$ServerOption::LOGGING_LEVEL(Int16)\"";1 /Par "\"$ServerOption::SYNCHRONIZED(Boolean)\"";True /CALLERINFO SQLAGENT /REPORTING E',
- Change to this
- @command=N'/ISSERVER "\"\SSISDB\PACKAGELOCATION\""
/SERVER SERVERNAME /Par "\"$ServerOption::LOGGING_LEVEL(Int16)\"";1 /Par "\"$ServerOption::SYNCHRONIZED(Boolean)\"";True /CALLERINFO SQLAGENT /REPORTING E',
6) Now change the name of the package in the script and run it. Now the new package can be edited in the GUI to change things like the schedule and alerts. Also you
can edit any existing packages.

Query editing in Management Studio

Similar Messages

Maybe you are looking for