Query Element in Transport Connection

Gurus,
    When i transported my report to production it failed because some elements are
    missing;
    Question1 - How do i identify the objects based on the GUID (that long alpha
                      numeric number).
    Question2 - I don't know how i missed couple of elements because i have
                      collected the query element in transport connection, thought it
                      would bring any object associated with the query.
Thanks a lot..

Hi Geni,
I would take the objects which are in red in the failed request.
copy that object from the list which is the ELTUID.
Then goto se16 > RSZELTDIR table
Enter that ELTUID which is the first field and execute
This will give u the name of the element which is missing from the transport request.
Then collect that element and transport again.
Hope this Helps.
Thanks
Majeed

Similar Messages

Can I select the query elements of structure manually in transport conn

Hello all,
I am trying to select a structure and the elements of the structure manually in transport connection. I am able to slect the structure from from query elements -> structure but now how can i select (manually) the items like new selections and new formulas that are inlcuded in my structure.
When I go and search for that query element in table V_ELTDIR_TXT it says that the the items of my structure are RKF but when i try to serach under query elements -> RKF i dont see them.
Can someone help here.
Thanks in advance

Hi Kamaljeet ,
you are trying to tell me that i can just slect my query and structure (manually..so basically only 2 query elements in transport request)...and transport that and it should take care of selections and formulas in structure.
I have created a transport as per what you have told, waiting on basis to transport it. Will update you in few minutes.
Thanks again

Transport Query and Query elements

Dear all,
I have a questions regarding transportation of a Query. When I transport the Query from the transport connection should I ticked also the Query elements or not?
What happend if I choose just some of the Query elements?
Thanks

Hi.
You should select query elements.
Otherwise some changed elements will not be transported correctly.
Let's say you changed RKF and not selected such element in transport connection - in this case the change in RKF will not be transported.
Regards.

Unable to collect the changed query elements to a transportable request

Hi All,
I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
Pls advice how to collect it in a transport request & move it?
Thanks & Reagrds,
Shreesh.

Hi Shreesh,
It may be collected under default request. You can collect changed objects by releasing default request.
aftre releasing default request
go transport connection(TX-RSOR) object type -
>query elements -
> Query--> collect your query.
Grouping option as only necessary object
then click on "Package"
then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
Hope this will help you.
Thanks,
Vijay.

Transport of Queries: Query Designer vs. Transport Connection in RSA1

Hello,
actually we are having a very strange behavior towards query transports.
Whenever we collect queries using Query Designer ("save"), all query elements are written on a transport request.
Collecting queries using rsa1 transport connection collects additional repair elements. For some reason these repair elements cause problems: although query elements + repair elements are transported in transport protocol, the query itself does not exist on the quality system.
Any idea why?
Thank You!
Goliad001

Hi,
If you are getting error in transport log due to repair elements, then you can move your transport in Overwrite mode. And when you are moving your query through transport organizer make sure that you have marked your query as well for transport along with dependent objects.
Once you collect all the objects and write them to TR just have a refresh to make sure that all the objects are written to TR. You can check that just beside the object name in Transport organizer.
Regards,
Durgesh.

How To Delete Multiple Query Elements in a Transport

Guys,
How do you delete Multiple Query Elements in a transport in DEV? Or it's not posible. I tried to select multiple but only one is being deleted.
Thanks,
Recca

Hi Recca,
As Nanda said, just go to tcode SE03..Click Unlock Objects (Expert Tool)..Paste your TR number (one at a time) then click Unlock..
Go back to SE10 and delete your TR numbers..
Regards,
Loed

How to find out to which query the query-elements in a transport belong?

Hi specialists,
the topic should already say everything.
I've got a changeable transport-request with several query-elements in it.
But I haven't any idea to which query this elements belong. Where do I need to look-up that information?

The excat table is not known to me..try finding in the following tables:
RSZCALC
RSZCEL
RSZCHANGES
RSZCOMPDIR
RSZCOMPIC
RSZCONTROLTEXTS
RSZELTATTR
RSZELTDIR
RSZELTPRIO
RSZELTPROP
RSZELTTXT
RSZELTTXT_MULTI
RSZELTXREF
RSZGLOBV
RSZIELPICMON
RSZOPRATOR
RSZOPRATXT
Thanks..
Shambhu

Transport request failed-inactive version of query element.

I have transported 70 reports from BI development to production.
the request has failed due to inactive version of the query element.
How to find which report the query element belongs.
Please advice how should i troubleshoot this issue.

Murali, check this table :RSZELTXREF
enter the element name in field TELTUID. Then from the result, select the value of field SELTUID and enter it as value of field ELTUID to check data of table RSZELTDIR.
That will give you the query name.
Regards
Ashwin.
Edited by: ashwin kumar on Apr 27, 2010 10:11 AM

Transport Connection of a Query

When I am in transport connection and choose my query, the characteristics and key figures are displayed. If I right click there are options:
Transport All Below
Do not Transport All Below
Add optional objects
Remove optional objects
What do these mean? Thanks

Has to do with whether all related objects get transported along with the query, e.g. InfoCube, Update Rules, InfoObjects, Variables, etc. Normally, for a query, you would <b>not</b> want to transport the Infocube or InfoObjects. If you created new variable for the query, that would need to go.
Never used the Optional Objects.

Using XML Import/Export in Transport Connection

Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... Jody

This is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John

Variable screen not popping up in QA: All query elements imported successfu

Hi Experts,
I transported 4 queries to QA.
The request was successfully imported.
When i open the query in QA, variable screen does not show up for any of the queries.
I double checked to make sure that the variables were collected and transported.
Any ideas what might have happened?
I have workbooks for each of the queries (1:1). The workbooks have not been transported yet (this shouldn't matter correct?)
Points will be assigned

Hi Rajen,
1) Do a check on your queries in Q system and D system.
If there is difference between Q and D then it is definitely your transport request problem.
Collect them one by one in transport connection . Dont collect all4 at once. Cross check that you've collected all your variables. See that all your query elements are in the same request.
Good luck
Edited by: satish murthy on Feb 7, 2008 10:19 PM

Query variable modification transport

I modified a query variable description in RRMX and a change request (let's call it CR1) gets created. But I wonder if I should go to RSA1 Transport Connection to add the variable to CR1? and how? I used to do this before quite a while ago and don't remember. Anyone's answer is greatly appreciated!

I go to RSA1 Transport Connection and locate the query variable and find that the CR number I mentioned above is listed under the column of Transport Request, that means I don't have to take any action, right?
I also go to SE09, find the CR number, but find the following under it:
Elements of the Query Builder
     3V1YMXBY0TW59BDED9632UZ05
     3V1YMXJMJSHURXWUJ38FCWXPX
     3V1YMXRB2R3KAKGAOXARMYWFP
     3V1YMXYZLPP9T6ZQURD3X0V5H
     3V1YMY6O4OAZBTJ70LFG72TV9
     3V1YMYECNMWOUG2N6FHSH4SL1
     3V1YMYM16LIED2M3C9K4R6RAT
     3V1YMYTPPK43VP5JI3MH18Q0L
     3V1YMZ1E8IPTEBOZNXOTBAOQD
     3V1YMZ92RHBIWY8FTRR5LCNG5
     3V1YMZGRAFX8FKRVZLTHVEM5X
     3V1YMZOFTEIXY7BC5FVU5GKVP
     3V1YMZW4CD4NGTUSB9Y6FIJLH
     3V1YN03SVBQCZGE8H40IPKIB9
     3V1YN0BHEAC2I2XOMY2UZMH11
     3V1YNI1142DWG1RY39H665IGL
     3WHDEB8V8U67QMLG3GCHWS7UD
     3WHM6ATJPZQ1ZHELM3DG5URAT
I can't tell if it contains the variable or not from the above lines.
Thanks

RE:Transport connection

Hi SAP Guys...
this is khaja...
can any one explain me the following one...
1.what is a Transport connection?.how do we collect the objects in Transport connection?.after collection how do keep into one request?.
Regrds.
khaja

In SE09 & SE10, under "Elements of the Query Builder" node, u can see the query names something like below, which is same as the technical name (not description) in Transport Connection..
4CXFEN58FRLEKDNDNG9AACM3I
4CXFENCWYQ74306TTABMKEKTA
In the Query Designer
tech. name : ZDZAS_MP01_Q101
Description : Number of Processes
But when comes to Transport Connection
Description : Number of Processes
tech. name : 4APUSIVVA4NN3QZK65YRJVROE
whatever tech.name in Transport Connection, that will apper in SE09 & SE10
Edited by: Mr. V on Mar 20, 2009 5:24 PM

Table that can give information about Query element

Hi All,
Please can you help, is there any table which can show the query elements belongs to which Query or Object.

Hi Sulochan,
You can go to rsa1 - Transport connection and select the webtemplate there. It would show you all the elements in the template along with their technical name. That should be of help. Else, you can copy and paste the technical name in the following tables and check if they are present in it.
RSZELTDIR                             Directory of the reporting component elements
RSZELTTXT                            Texts of reporting component elements
RSZELTXREF                          Directory of query element references
RSRREPDIR                            Directory of all reports (Query GENUNIID)
RSZCOMPDIR                         Directory of reporting components
RSZWOBJ                              Storage of the Web Objects
RSZWOBJTXT                       Texts for Templates/Items/Views
RSZWOBJXREF                     Structure of the BW Objects in a Template
RSZWTEMPLATE                   Header Table for BW HTML Templates
Hope this helps.
Regards
Snehith

Query elements tables

Hi all,
I have made a transport release ,obviously it failed due to an element not available in active version and another element is missing.
now i have the ID's of these two element. i have to know the object to that id in query.
help please.
regards,
rakesh.

Hi,
Instead of finding the objects related to those technical object IDs, you can transport the query again with all the elements captured in the transport request.
In transport connection, while capturing the query make sure that you have captured all the elements. When you save a query into request, filter on objects with "ELEM". This will give you all the elements.
Regards,
Yogesh.

Query Element in Transport Connection

Similar Messages

Maybe you are looking for