Query for inserting data into table and incrementing the PK.. pls help

I have one table dd_prohibited_country. prohibit_country_key is the primary key column.
I have to insert data into dd_prohibited_country based on records already present.
The scenario I should follow is:
For Level_id 'EA' and prohibited_level_id 'EA' I should retreive the
max(prohibit_country_key) and starting from the maximum number again I have to insert them
into dd_prohibited_country. While inserting I have to increment the prohibit_country_key and
shall replace the values of level_id and prohibited_level_id.
(If 'EA' occurs, I have to replace with 'EUR')
For Instance,
If there are 15 records in dd_prohibited_country with Level_id 'EA' and prohibited_level_id 'EA', then
I have to insert these 15 records starting with prohibit_country_key 16 (Afetr 15 I should start inserting with number 16)
I have written the following query for this:
insert into dd_prohibited_country
select
     a.pkey,
     b.levelid,
     b.ieflag,
     b.plevelid
from
     (select
          max(prohibit_country_key) pkey
     from
          dd_prohibited_country) a,
     (select
prohibit_country_key pkey,
          replace(level_id,'EA','EUR') levelid,
          level_id_flg as ieflag,
          replace(prohibited_level_id,'EA','EUR') plevelid
     from
          dd_prohibited_country
     where
          level_id = 'EA' or prohibited_level_id = 'EA') b
My problem here is, I am always getting a.pkey as 15, because I am not incrementing it.
I tried incrementing it also, but I am unable to acheive it.
Can anyone please hepl me in writing this query.
Thanks in advance
Regards
Raghu

Because you are not incrementing your pkey. Try like this.
insert
   into dd_prohibited_country
select a.pkey+b.pkey,
     b.levelid,
     b.ieflag,
     b.plevelid
   from (select     max(prohibit_country_key) pkey
        from dd_prohibited_country) a,
     (select     row_number() over (order by prohibit_country_key) pkey,
          replace(level_id,'EA','EUR') levelid,
          level_id_flg as ieflag,
          replace(prohibited_level_id,'EA','EUR') plevelid
        from     dd_prohibited_country
       where level_id = 'EA' or prohibited_level_id = 'EA') bNote: If you are in multiple user environment you can get into trouble for incrementing your PKey like this.

Similar Messages

Need Logic for Inserting data into table from another table

Hi,
Could you please give me some logic on below:
TABLE_A has columns A,B,C,D
What i did
==========
Created new table
TABLE_1_A with columns A1,A2,B1,B2,B3
Requirement
===========
I should populate columns A1,A2 (table TABLE_1_A) with the data from column A (table TABLE_A)
& simillarly populate columns B1,B2 with the data from B.
the data is huge in the table_a.
Database: 10g
Thanks.

Hi,
Here's one way:
INSERT INTO table_1_a
        (a1, a2, b1, b2)
SELECT      a, a, b, b
FROM      table_a
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
If you're asking about a DML statement, such as INSERT, the sample data will be the contents of the table before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ {message:id=9360002}

Which trigger to use for insert data into db table in Forms

Hi,
My form is current having a database block with table reference. When enter data into form field and click on save button. Automatically the record is inserted into database table.
I want to make this as manual insert. I changed the data block to a non-database. Where should i write the insert statement in order to insert data into table.
Is it Key-commit trigger at form level?
Please advise.
Thanks,
Yuvaraaj.

Hi Yuvaraaj.
Insert should happen when we click on the save which is inbuilt in the form. In this case where should i write the insert statement.Forms in built save commit's the form data where block is based on database not non database.
@2nd reply
Ypu are right. The reason i chnaged the database block to non-database is Currently i have a database block with form field canvas which insert only 1 record in to >table when we click on standard save button. The requirement was to add a field called CHANNEL which should have multiple values displayed. (i created this channel >field in a seperate datablock (non database) and used the same canvas.) When we insert data in all fields (single record) and channel we should be able to selected >multiple channel (say A,B and C) when we click on save then 3 records should be inserted in to the table which looping values for each channel. This was the actual >requirement and this is the reason why iam changing the block to non-database block.You are talking about two blocks.. 1. Master block and 2. Details block name channel
You are inserting one record in master block then insert 3 record name A,B,C for that master record.
Now you want master record should insert to each A,B,C record. Means
'how are you' --master record
and you want
'A'- 'how are you'
'B'- 'how are you'
'C'- 'how are you'OR
?Ok. If you want master record save in database and then want to save non-database(channel) data into database USE Post-Insert trigger at block level and do the rest.
Hope this helps...
Hamid
Mark correct/helpful to help others to get right answer(s).*
Edited by: HamidHelal on Jan 26, 2013 1:20 AM

Please recommend if we have options to read xml file and insert data into table without a temporary table.

Please recommend if we have options to read xml file and insert data into table without a temporary table.

DECLARE @data XML;
SET @data =N'<Root>
<List RecordID="946236" />
<List RecordID="946237" />
<List RecordID="946238" />
<List RecordID="946239" />
<List RecordID="946240" />
</Root>'
INSERT INTO t (id) SELECT T.customer.value('@RecordID', 'INT') AS id
FROM @data.nodes('Root/List')
AS T(customer);
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Insert data into table 1 but remove the duplicate data

hello friends,
i m trying to insert data into table tab0 using hints,
query is like this..
INSERT INTO /*+ APPEND PARALLEL(tab0) */ tab NOLOGGING
(select /*+ parallel(tab1)*/
colu1,col2
from tab1 a
where a.rowid =(select max (b.rowid) from tab2 b))
but this query takes too much time around 5 hrs...
bz data almost 40-50 lacs.
i m using
a.rowid =(select max (b.rowid) from tab2 b))....
this is for remove the duplicate data..
but it takes too much time..
so please can u suggest me any ohter option to remove the duplicate data so it
resolved the optimization problem.
thanks in advance.

In the code you posted, you're inserting two columns into the destination table. Are you saying that you are allowed to have duplicates in those two columns but you need to filter out duplicates based on additional columns that are not being inserted?
If you've traced the session, please post your tkprof results.
What does "table makes bulky" mean? You understand that the APPEND hint is forcing the insert to happen above the high water mark of the table, right? And you understand that this prevents the insert from reusing space that has been freed up because of deleted in the table? And that this can substantially increase the cost of full scans on the table. Did you benchmark the INSERT without the APPEND hint?
Justin

Insert Data into Table from TXT or CSV file !!!!!

Dear All,
Recently I have started working on APEX. In Oracle Forms, we used to use TEXT_IO for inserting records into tables from txt files. Now I want to do the same thing in apex 3.2. How can I insert data into tables from txt of csv files.
Waiting of your valuable suggestions.
With kind regards,
Yousuf.

Yousuf
wwv_flow_files is used by APEX to hold uploaded files.
If you incorporate a file browse item on you page, browse for the selected file, then submit the page (having the PL/SQL process described as an on suibmit process) then what I detailed should work.
If you don't need users to have access to this then just go to Home>Utilities>Data Load/Unload in APEX and there is a handy load utility there that does it all for you.
Cheers
Ben

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

Insert data into table from JSP page using Entity Beans(EJB 3.0)

I want to insert data into a database table from JSP page using Entity Beans(EJB 3.0).
1. I have a table 'FRIENDS', (in Oracle 10g database).
2. It has two columns, 'NAME' and 'CITY'. Both have datatype strings(varchar2).
3. Now from a JSP page, having two textfields, 'NAME' and 'CITY', I want to insert data into table 'FRIENDS'.
4. In between JSP and database is a Entity Bean(EJB 3.0) and a stateless session bean.
5. I am using JDev as editor.
Please provide me code ASAP or link with similar example.
Thank you.
Anurag

Hi,
I am also trying that scenario. So u can
Post the jsp form data to a Servlet which will act as a Controller.
In the servlet invoke the business method.
Similar kind of app is in www.roseindia.net
Hope this would help u.
Meanwhile if u get any optimal solution, pls post it.
Thanks,
Happy Java Coding.

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How do you access a web service to insert data into table?

Ok I have a simple html/jsp survey form to host on our web site. Because of firewall issues I cannot do a direct connect to the database and insert the data from the form. So I need to take the data from the survey form, and pass it to an existing web service, or create a web service that will insert this information for me into the database table?
Thanks again.
orozco

Thanks for the reply shanu. Well, because of firewall issues, as a work around we use a web service to insert data into the database table. Since the Web Service already exist, we just thought it would be easy enough just to pass the parameters to it, and have it do the insert. So really all I need is just to communicate with the already existing web service. I will be honest though I have not really worked with web services before.
orozcom

Insert data into table

When I try to insert data into the table, I get the error message:
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The name 'uniqueID' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
What is wrong in the following code?
String uniqueID, GenericType;
float elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume;
stmt.executeUpdate(
"INSERT INTO IFCData VALUES (uniqueID, GenericType, elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume)" );

No, sorry, now that I look at it for more than five seconds, your SQL is wrong.
You don't have a list of columns that you are updating; I'm not sure whether this is bad SQL or whether the database will assume you meant to update all the columns in their declared order. But more to the point, the "values" you are assigning to those columns are not what you want. For example, the value you assign to the first column is uniqueid, meaning either the column named uniqueid or some SQL constant named uniqueid. There isn't any such thing, hence the message.
I suppose you wanted to put the value of the Java variable "uniqueid" there. Of course the database and the JDBC driver don't know anything about the names of variables in your code, so they can't replace the string "uniqueid" by the value of the variable. The way to do that is to use a prepared statement, like this:PreparedStatement ps = conn.prepareStatement("INSERT INTO IFCData VALUES (?, ?, ?, ?, ?, ?)");
// fix this SQL so you name the columns you are inserting into as well
ps.setString(1, uniqueID);
ps.setString(2, GenericType);
ps.setFloat(3, elevation);
// and so on
ps.executeUpdate();PC²

Error While Inserting Data into table using OAF

Hi Experts,
I am learning OAF; i am trying into insert the data into table using OAF. I followed the below procedure.
My table(OLF_TEST_TBL) Columns:
EmpID (Number), Ename(VARCHAR2 100), Sal Number, and who columns.
1. created Application Module (AM).
package: oracle.apps.mfg.simplepg.server
name: oaf_test_tbl_am
2. created simple page
name:EmployeePG
package:oracle.apps.mfg.simplepg.webui
3. Assigned the Application Module to Page
4. Created Entity Object(EO)
name:oaf_test_tbl_eo
package:oracle.apps.mfg.simplepg.schema.server
schema:apps
table:OLF_TEST_TBL
note:
1. EMPID column is selected as primary key
2. selected create method, remove method and validation method.
3.checked generate default view object
VO:
name:olf_test_tbl_vo
note: Entity Object was assigned to VO
Coming To page:
page main region:EmployeeMainRN
1.under main region i created one more region using wizard
selected AM and VO, region style-default single column
2. under main region i created one more region
region style- pagebuttonbar, ID:pagebutoonsRN
3. under pagebuttonRN, created two submit buttons(ID:SUBMIT, ID:CANCEL).
In AM java page:
created a method to insert row and for commit.
Insert Method:
public void insertrow(){
OAViewObject vo=(OAViewObject)getoaf_test_tbl_vo1();
if(!vo.isPreparedForExecution()){
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Commit Method:
public void savaDataTooaftesttable(){
getDBTransaction().commit();
In EmployeeMainRN, created a controller.
In this controller process request method, 'insertrow' method was called.
import oracle.apps.fnd.framework.OAApplicationModule;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("insertrow");
To commit the transaction when SUBMIT button pressed, commit method was called in process form request method.
import oracle.apps.fnd.framework.OAViewObject;
public void processformRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("SUBMIT") != null)
am.invokemethod("savaDataTooaftesttable");
Error After clicking the submit button_
I ran the page, page was opened successfully. Once i enter data and click submit button, it's giving the following error.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object oaf_test_tbl_am.oaf_test_tbl_vo1700_oaf_test_tbl_vo1_practice_test_prc1_oracle_apps_mfg_simplepg_server_oaf_test_tbl_am.oaf_test_tbl_vo1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Experts, Kindly help me why i am getting this error.
Awating your replies.
Thanks in advance.

If you dont want to create message. You can throw exception like below as well
throw new OAException("Emp Id is "+empId+" and employee name is "+empName, OAException.CONFIRMATION);Thanks
--Anil

Usage of sequence for uploading data into tables(column store) using CSV

How to make use of sequence when data is uploaded into table(column store) with the CSV file ?

Hi Sharada,
You may have to follow the below steps:
1) To load the data from flat file to a Staging table using IMPORT command
2) You have to call the procedure to load the data further into final Table.
a) Have a look on this procedure to load data :
SAP HANA: Generic Procedure using Arrays to Load delta data into Tables
b) See my reply on the syntax on how to use "Sequence"
Auto-Incrementor in stored procedure!
You will have to ensure that you frame your insert query in such a way to have the sequence number in the target table.
Regards,
Krishna Tangudu

Calling webservice in udf for inserting data into webservice

Dear Experts,
      Please give me the drawbacks of using lookup function for inserting data. we are calling a webservice from the udf for inserting the data using a webservice.
It is a file to jdbc usnig a soap lookup . we use this approach because we need to pass the response from webservice along with the error data to the jdbc.   is there any other way to do it without using bpm ?
    In the udf we are creating the xml structure for webservice and passing the parameters through arguments.
is there a better approach for this ?
Thanks,
Aju

Hi Aju,
You can do it without BPM.
Write UDF for Soap Lookup. Parse the response message from Webservice. and map the required values to respective fields.
See the weblog
Webservice Calls From a User Defined Function.
Negative point of this solution is that it will take some time to call Webservice and get response back from it.
Kulwinder

Dequeue XML from Oracle AQ and insert data into table

Using PL/SQL in a stored procedure, I need to dequeue a message from an Oracle AQ queue, parse the XML content and insert the data in an Oracle table. This is being done in Oracle 9.2.x.
The payload for the message consists of 2 attributes, APPLICATION_DATA (VARCHAR2(32) and MESSAGE_BODY (CLOB). The MESSAGE_BODY is an XML document. A sample of the message is shown below:
(M_NAME=MSG_LAW_WR_CRE_UPD, <?xml version = "1.0"?>
<MSG_LAW_WR_CRE_UPD ID = "WMIS-4744" SRC_SYSTEM_CODE = "WMIS" SRC_SYSTEM_INSTANCE = "WMIS">
<WR:CMP_LAW_WR_CRE_UPD xmlns:WR = "WR" >
<WR:DATETIME>12/19/2005</WR:DATETIME>
<WR:RUSCODE>100</WR:RUSCODE>
<WR:WRNO>38213</WR:WRNO>
</WR:CMP_LAW_WR_CRE_UPD>
</MSG_LAW_WR_CRE_UPD>)
This message needs to be dequeued from a queue named INBOUND, parsed and inserted into a table named INFO_TO_ACCT (CREATEDATE date, RUSCODE varchar2(10), WRNO number).
Any help would be appreciated.

SELECT EXTRACTVALUE(xmltype('<?xml version = "1.0"?>
<MSG_LAW_WR_CRE_UPD ID = "WMIS-4744" SRC_SYSTEM_CODE = "WMIS" SRC_SYSTEM_INSTANCE = "WMIS">
<CMP_LAW_WR_CRE_UPD>
<DATETIME>12/19/2005</DATETIME>
<RUSCODE>100</RUSCODE>
<WRNO>38213</WRNO>
</CMP_LAW_WR_CRE_UPD>
</MSG_LAW_WR_CRE_UPD>'),'//DATETIME/text()') FROM DUAL;
hope this helps.

Query for inserting data into table and incrementing the PK.. pls help

Similar Messages

Maybe you are looking for