Query for selecting current date when running report
Hi all
I need a query that will copy today's date on posted sales order via DTW then that query will be linked to an alert and be sent to the sales manager every morning after the import went through successfully.
The report at the moment is running fine as i pulling through the other info required the only problem is it's pulling all the sales orrders on the system , we want it to pull only the days orders imported.
You could use either of these queries
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE T0.DocDate = GETDATE()
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate
OR
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE DATEDIFF(Day, T0.DocDate, GETDATE()) = 0
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate
Similar Messages
-
Query for select CLOB data field
Hi All,
I want to know how to write a SQL query for select CLOB tyoe data from a tablw. when I am trying to use the simple SQL it gives an messageLOB types requires OCI8 mode and currently uasing OCI7 ode.
Also I am not aware of oci mode?
If its working for OCI8 mode how I should changer it in to OCI8 mode? (I am using 10g rel 2)
Thans and regards
BuddhikeHi ,
i don't want to use loop (sy-tabix) ..
any particular reason for this ?
as u cannot automatically generate serial number, u have to go for loop....endloop.
Thanks
Karthik -
Query not refreshing all data when run in workbook with other queries
All,
I have the following problem. I have a workbook that has two queries, one on each tab.
The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
And both queries run fine when executed alone.
Again, Both queries use the same company code variable.
Any help will be rewarded with points and is appreciated.Tasha,
Remove the queries from the workbook and reinsert them. This should show the desired result. -
Error while executing a sql query for select
HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
19 PX COORDINATOR
18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1 -
No batch input data for screen SAPMSSY0 0120 when running BDC in background
Hi Experts,
I am facing an issue "No batch input data for screen SAPMSSY0 0120" when running a BDC for VA01 in background.
The scenario is like we have EDI orders coming into SAP in the form Idocs. These EDI orders are processed by Function module
IDOC_INPUT_ORDERS. This FM module internally calls VA01 (Call Transaction) to create Sales Orders in SAP.
Now we have a scenario in which we want a popup screen to come up & ask for selection of record from list of records displayed on popup screen. In background since we can not show up a screen, we are programatically selecting the record we want & going ahead.
Now what is happening is during foerground the functionality is working abosultely fine, that is incoming idoc is getting posted successfully in SAP with status of 53. Incase of back ground processing of the same we are getting an error
No batch input data for screen SAPMSSY0 0120
I have checked this screen through screen painer(SE51) & i did not find any element on this screen but Element list
shows one field Syst-Xcode.
Kindly guide me how to fix the issue so that the same can work as expected in background.
Regards,
Chetan.Hi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald -
Smart forms print control pop box (no required) when run report
Dear All Expert Guru,
how to control printing pop box when execute transaction code ,Report are make in smart form format
because while run our report then come printing pop box select out put device the will come report
. but our user required no should be come printing pop box they are required when run report direct come report
Pls help me any one.
Thanks & Regars.
Sudhir SrivsatavaHi,
Pass the parameter no_dialog = 'X' while calling the smartform.
data: wa_ctrlop type ssfctrlop.
wa_ctrlop-no_dialog = 'X'.
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX = ARCHIVE_INDEX
* ARCHIVE_INDEX_TAB = ARCHIVE_INDEX_TAB
* ARCHIVE_PARAMETERS = ARCHIVE_PARAMETERS
CONTROL_PARAMETERS = wa_ctrlop
* MAIL_APPL_OBJ = MAIL_APPL_OBJ
* MAIL_RECIPIENT = MAIL_RECIPIENT
* MAIL_SENDER = MAIL_SENDER
* OUTPUT_OPTIONS = OUTPUT_OPTIONS
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
* JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
* JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
Regards,
Srini. -
How to achieve SUBMIT for the current page when I click other tab?
Problem: How to achieve SUBMIT for the current page when I click other tab?
Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
Appreciate your time and your answer.
MikeScott,
just for clarity, if I understood correctly what you said there are two possibilities:
1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
I couldn't find an example of the latter, but I found easily an example of the former:
it's the "Report attributes", page 420 of app 4000.
If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
Bye,
Flavio -
REP-56092 WHEN RUN REPORT IN WEB LAYOUT
I have installed report 9iDS and can run report in paper layout without any problem.
However , when I press "Run Web Layout" button , I get message
rep-56092 NO CLASS DEFINED FOR DESTINATION TYPE SCREEN WHEN RUN WEBLAYOUT.
Do anybody has idea why this is happening??Hi
If the ENVIRONMENT is Sun SPARC and
NLS_LANG: Traditional Chinese_Taiwan.ZHT16MSWIN950 , then it is a known problem. There is a bug 2332838 filed for this issue.
regards
~sudha -
Mesage "A client copy run is currently active" when running SCC1
Hello
I get a mesage "A client copy run is currently active" when running SCC1. So I can not transport tr. req from source client.
Last client copy was 2 years ago
Please for helpCheck SCC3 for CC traces, you'll see what is going wrong there.
regards
Juan -
Maxmize window when run Report builder 10gR2
Thanks in advance to all,
I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link?
PS. I have already post on Form ForumThanks for your reply.
But i was speaking maxmize window of report builder application on WIN xp, because when i
exe rwbuilder i always,have to maxmize window.
I know that it is a fool problem, but if to someone it happens and he had resolved...
Howevar thanks for your time -
Need a query for export table data .....
Hi,
I need a query for exporting the data in a table to a file.
Can anyone help me ?
Thanking You
JeneeshSQL> spool dept.txt
SQL> select * from dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> spool off
SQL> ed dept.txt -
Query for selecting the 4 highest marks of the student
query for selecting the 4 highest marks of the student
Guys dont start an argument,
tey this one; please
Hi,
Try this
Top 4
Select ename,
sale
From dept d,
emp e1
Where d.deptno = e1.deptno
And &p > (Select Count(e2.sal)
From emp e2
Where e2.sal > e1.sal
And e2.deptno = e1.deptno
Order By 1,2
Bottom 4
Select ename,
sale
From dept d,
emp e1
Where d.deptno = e1.deptno
And &p > (Select Count(e2.sal)
From emp e2
Where e2.sal < e1.sal
And e2.deptno = e1.deptno
Order By 1, 2
&P you use any value say 3,4,5,6
This is top N analysis
Regards
Umesh -
Query for selecting first 3 characters of name of any person
query for selecting first 3 characters of name of any person
10:52:44 SQL> SELECT SUBSTR(ename, 1, 3) first_three FROM emp;
FIRST_THREE
SMI
ALL
WAR
JON
MAR
BLA
CLA
SCO
KIN
TUR
ADA
FIRST_THREE
JAM
FOR
MIL
Ton
15 rows selected.
Elapsed: 00:00:00.00 -
Query for the FULL AND FINAL SETTLEMENT REPORT
Hi, any one has the query for the FULL AND FINAL SETTLEMENT REPORT in oracle hrms??
Hi,
I go through that .class file and find that they have used below package in that.
PAY_IN_TERM_RPRT_GEN_PKG
Hope this will help you. -
Report returns wrong data when run on server
Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
KimHi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair
Maybe you are looking for
-
How do I update an SSL certificate? (Includes How-To info :)
OK, I have an IPSCA certificate installed in my (10.5.2) server. I used the 90 day trial period, so it's set to expire next week. It's worked very well, though, so I decide to pay for the full one (at only $59 for two years I figured it was a good pr
-
is this a known issue?
-
Do I need to use Bindings?
Hi All I wonder if you can help I have a class (driver.m) that takes an input from a USB device (the callback function is embedded into the class and passes data back to the instance of the class). There are a number of instance variables that change
-
My ipod touch wont boot up it shows the apple logo and then blinks on and off. My second ipod touch wont connect to itunes/be recononized it is totally locked.. i looked at videos on the internet, and they say connect it to the FIRST computer that it
-
User defined fields in SC with searchhelp ?
is it possible to link a searchhelp to user defined fields in a shoppincart ? I have already defined 2 fields in ZINCL_EEW_PD_ITEM_CSF which I can see and edit when I create a shoppincart, but for 1 field I would like to add a searchhelp which connec