Mesage "A client copy run is currently active" when running SCC1
Hello
I get a mesage "A client copy run is currently active" when running SCC1. So I can not transport tr. req from source client.
Last client copy was 2 years ago
Please for help
Check SCC3 for CC traces, you'll see what is going wrong there.
regards
Juan
Similar Messages
-
How can I automatically have a new tab always be a copy of the current active tab?
The add-on extension "NewTabURL" (by "sogame") provided the option I want and used for a number of years. But it stopped working when Firefox was updated to version 16.0. When I click for a new tab, all I get is a completely blank tab. How can I automatically have the new tab always be a copy of the current active tab?
Can the extension "NewTabURL" be revised to work in version 16 and/or version 17? If not, how else can I get the new tab functionality that I desire? I can't seem to find any other extension that provides that functionality.
Milt BeychokMy trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok -
Invoke Method: Run VI produces error when run as an application
Hello,
I have upgraded from LabView 7.0 to 2009. One test program uses Run VI Invoke Method to start the main UI. On LabView 7.0 it works OK , when build as an application, but with LabView 2009 it gives error 1003: Invoke Node xxx.vi <APPEND> VI Path: xxx. (I have checked that the path to "Open VI Reference" is correct.)
When run on LabView 2009 development environment (.vi) - no problem. I used the "Convert built script.." tool to convert to LabView 2009 built specifications. I have tried numerous different variations building application with LabView 2009 (including main UI files, different setups, etc.), but no luck. If someone has any ideas...
-timoMaybe it helps you for debugging:
I checked the property for the broken arrow. You need a property node and go Select Class 'Vi Server'->'VI' (skip this in your Application but navigate to the VI via the server and feed it to the node). Then it is Execution->State.
I need to draw some code to do it for me as well, once I'm done I'll post it here.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
I encounter 2 errors in the controller when running FSCT.
- "There were errors during running WordFileClose.dll scenario"
- "There were errors during running WordFileClose.dll scenario"
Does anyone has any ideas for this errors?
I am using the following server to run the FSCT:
- AD Server: Windows 2008 R2 SP1 x64
- FSCT Controller: Windows 2008 R2 SP1 x64
- Client: Windows 7 x64
- File Server: Non-Windows Server (EMC Isilon)
And the commands are as follows:
> fsct prepare dc /users 10 /clients testing /password password
> fsct prepare controller
> fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
> fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
> fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFoldersDear all,
The errors were:
<Error>1264 DeviceIoControl 1{WINERR}</Error>
<Error>Error executing scenario: WordFileOpen.dll</Error>
<Error>943 DeviceIoControl 50{WINERR}</Error>
<Error>Error executing scenario: WordFileClose.dll</Error>
Do you have any idea about what the errors mean?
Thanks,
Rayson -
The code below is a simple powershell statement which enables me to change the execution policy so that I can run powershell scripts. When I run this in a normal windows enviroment the statement will work fine, not giving me an issue whatsoever. However,
whenever it runs in the task sequence the TS fails. I am running this via the command line option in the task sequence, each time running this step as 3 different types of administrators.
powershell.exe -noninteractive Set-ExecutionPolicy -ExecutionPolicy unrestricted
Checking the log file it states this:
Set-ExecutionPolicy : The term 'Set-ExecutionPolicy' is not recognized as the InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
name of a cmdlet, function, script file, or operable program. Check the InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
spelling of the name, or if a path was included, verify that the path is InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
correct and try again. InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
At line:1 char:1 InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ Set-ExecutionPolicy -ExecutionPolicy unrestricted InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ ~~~~~~~~~~~~~~~~~~~ InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ CategoryInfo : ObjectNotFound: (Set-ExecutionPolicy:String) [], InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
CommandNotFoundException InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ FullyQualifiedErrorId : CommandNotFoundException InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
Failed to run the action: Script Exception.
Incorrect function. (Error: 00000001; Source: Windows) TSManager 13/10/2014 17:28:09 2716 (0x0A9C)
I am new to both SCCM and Powershell, but from my point of view, this should work, considering that the syntax is not actually incorrect? Please could anyone with any idea drop some hints and tips on how to
stop this issue.I'm not using 3 admin accounts at once if that's how it sounded. I have tried 3 different Admin accounts because I felt that perhaps the difference in permissions may have made a difference in whether I was able to run the syntax and scripts. So I tried
using my own personal administrator account, the SCCMNA account, and the local admin account, which I read worked.
At this point in the task sequence I have:
- Installed the OS
- Connected to the domain
- Installed Applications such as; Flash, Shockware, Reader etc.
Once it has installed the last application within a folder called "Helper Apps" (Which contains various Java and Adobe apps which install fine) it will then run a "Use Toolkit Package" using the MDT toolkit, once this stage is complete
it then progresses to the Script Exception section of the TS.
powershell.exe -noninteractive Set-ExecutionPolicy -ExecutionPolicy unrestricted
I obviously need this to work otherwise I am not allowed to run the script, but because this syntax is "incorrect" it stops the task sequence.
I hope this information might shed some more light on the situation. -
How to run tests in Firefox when running script using runScript.bat
I am trying to run OATS script from commandline without opening Openscript IDE(eclipse). I use the following command to execute my script:
runScript "<scriptpath>/<scriptName>.jwg"The script starts to execute and launches IE. I wanted to run my test on Firefox but it always launches IE even if Firefox is my default browser.
If I run my script from Openscript IDE it honours the Browser settings in View > OpenScript preferences... OpenScript > General > Browsers. When running thorugh cmd line, these settings are not taken into account as Eclipse preferences settings are applicable only for the workspace selected for the IDE.
Any thought on how to set these preferences when running scripts using runScript.bat file?
Thanks,
Manish KhatreHello
You need to pass the value/parameters (preferences) to the command line as documented in the OpenScriptUserGuide.pdf.
Something like
-browser.type type
Specify the browser type to use for script playback
where type is one of the following (use exact case
and no spaces):
■ InternetExplorer
■ Firefox
The default is InternetExplorer
JB -
What is the current directory when running Tomcat
Hi,
In one of my classes I try to open a file for reading. I did this with:
FileReader fr = new FileReader("files/httpd.conf");
When I try to run the project, it can't find the file. I tried every possible place in my webapps directory and when I insert some code to take a look at his current path, i get an index which really isn't in webapps.
Can somebody please tell me where to put my files when i try to open them using files/httpd.conf
Much thanks,
Hugo HendriksI'm still getting a servlet error because he can't find the file. My directory structure is like:
webapps/act/ = all my html and jsp files
webapps/act/files = all my data files
webapps/act/WEB-INF/classes/apacheconfigurator = all my class files
my call in the class looks like this:
//Declareren van de input file
FileReader fr = new FileReader("../webapps/act/files/httpd.conf");
BufferedReader br = new BufferedReader(fr);
//Declareren van de temp output file
FileWriter fw = new FileWriter("../webapps/act/files/httpd.temp");
PrintWriter pw = new PrintWriter(fw); -
Query for selecting current date when running report
Hi all
I need a query that will copy today's date on posted sales order via DTW then that query will be linked to an alert and be sent to the sales manager every morning after the import went through successfully.
The report at the moment is running fine as i pulling through the other info required the only problem is it's pulling all the sales orrders on the system , we want it to pull only the days orders imported.You could use either of these queries
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE T0.DocDate = GETDATE()
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate
OR
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE DATEDIFF(Day, T0.DocDate, GETDATE()) = 0
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate -
SPM 2.1 datasource background activity when running report for first time
Hi All,
When I log into SPM and click New -> Report, the cursor changes to the timer icon before i drag in a dimension or run a report.
In SM66 there is an SQL read statement that appears to coincide with this front end behaviour.
Often this process times out in the front end with a timeout error and "time dimension value help failed".
Then if i go to create a new report again, a new tab opens, and it opens instantly and there is no SQL read statement.
Why is an SQL read statement occurring at this point before any data is selected?
Why does it take so long?
Many thanks for any help
Kind regards,
NeilHello,
We initialize the time dimension when the reporting console is opened for the first time. Sometimes depending on the load on your server , this could take a long time thus timing out. I would suggest you to look at the load on your java server. Also , check if there are any background processes running on the ABAP side. Also take a look at the timeout limit in Application Properties and see if you can increase this limit.This might help initially.
As mentioned , the time dimension is only initialized when the reporting console is opened for the fist time in a given session. This explains why you don't see such a behavior subsequently.
Hope this helps!
Thanks,
Madhav -
Nike+ sensor :"no activity" when running
Hi,
I have s strange problem with a captor. I ve bught it last week and i used it one time with no problem. Yesterday when i was using it again it what shutting dont the training with message "no activity". I try to start again, it works 3 minutes and again everything stop "no activity". I restarted my Ipod touch, same message after 5 min (but always during the five minutes the sensor seems to work because it shows the allure and some distance...). When it was stopping I restarted sometime everything of the trainning and sometimes i've just cliqued on "restart"... and always the same, after a while "stop, cause no activity". I was going crazy!!After a trainning of 20 mn the result was only 1 km at 15'by KM!!!!.
I returned at home and tried to use the sensor with the ipod of my daughter and it was the same....
I ve tried with the old sensor of my daughter with my ipod and everything is ok.
What can I do?
Someone has an idea?
Thank u for your help (and sorry for the english, I m french....)
Message was edited by: Lablonde57Hello @Bertholli,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after doing a Restore on your computer you are now starting up to a blank screen. I am providing you with an HP Support document: Screen is Blank after Starting the Computer, which I believe you should review and apply the steps out within to resolve your blank screen issue.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
I have a server 2003 primary domain controller x32. I have a server 2008 R2 x64 that gives me the message you must run adprep /forestprep and wont continue. I put the server 2008 R2 x64 cd in the server 2003 x32 cd-drive and ran adprep /forestprep
and adprep /domainprep successfully. Now dcpromo on the server 2008 r2 x64 server keeps giving me the you must run adprep /forestprep message. After some searching, I think i'm getting this message because I ran adprep from the x64 disc and not
a x32 disc. And I that is the problem, how can I remedy this situation?Notice:
On July 1st we will be making Windows Server 2008 R2 General forum read only. After receiving a lot of feedback from the community,
it was decided that this forum is a duplication and therefore redundant of the
General Forum. So, until July 1st, we will start asking customers to redirect their questions to the
General Forum. On June 11th, CSS engineers will move any new threads to the
General Forum.
Please post a reply to
the announcement thread if you have any feedback on this decision or the process. You can also email
[email protected] -
Format command runs slow on Windows2012 when run through service
We have a windows service which performs some tasks. One of such task is format the given volume(volume name is passed from remote machine). We observed that till Windows2008 format was running properly. on Windows2012 same format starts correctly but runs
very slow. One special case if if the format is quick it runs fast (same speed as windows2008).
Another observation is when we start format as process though we set the priority high after start the priority of the process goes to normal
Any reason why format runs slow?
Any help/comments are welcomehere is some code
We do not use bat file but use process.
Here is some part of code for this
ProcessStartInfo FormatInfo = new ProcessStartInfo();
FormatInfo.CreateNoWindow = true;
FormatInfo.UseShellExecute = false;
FormatInfo.RedirectStandardOutput = true;
FormatInfo.RedirectStandardInput = true;
FormatInfo.FileName = "cmd.exe";
Process format_process = new Process();
format_process.StartInfo = FormatInfo;
if (true != format_process.Start())
int errCode = Marshal.GetLastWin32Error();
String ErrMsg = "Cannot start formatting. Error code = " + errCode.ToString();
Logger.LogDebug(ErrMsg);
String FormatCmdLine = "Format ";
FormatCmdLine += m_driveletter + ":";
if(quick_format)
FormatCmdLine += " " + Constants.QUICK_FORMAT_SWITCH + " "; -
Using 3.1Ghz i5 iMac 2011 with 6970M and OSX Lion 10.7, I'm having this temperature issue on the GPU diode where it was hovering around 80C on just normal task (browsing web). From iStat I noticed that the Graphic Module was taking full 33W even though I was just browsing.
But I did have a secondary display running at 1920x1080 via the thunderbolt port. The moment I disconnect it the Graphic Module drop to 15W and the GPU diod drop to around 60C.
So was it caused by the thunderbolt? Why does running external monitor taxing the GPU so much?Try resetting the SMC and see if that helps. On occasion it takes 2-3 resets for it to "take."
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Just like the title reads. 2011 MBP Quad Core 15". Used boot camp to instal Windows 7 Home premium but screen resolution is bad. Thank you
No. Reopen Boot Camp Assistant and click on the Continue button. You'll see in that screen a checkbox to download drivers. Check that box and uncheck the other boxes. Have a freshly formatted USB flash drive or hard drive connected. Must be partitioned MBR and formatted FAT32. You can format it while in Windows. Have it connected when you use Boot Camp Assistant. Once you click on the Continue button again BCA will attempt to download the drivers.
Once you have the drivers boot Windows. It should autorun the installer you downloaded after Windows gets itself settled in. -
Hi All;
I am setting up CRM on AIX with DB2, and am in the process of creating my Client 300. I was able to create the client in scc4, logged out of the system and then logged into the new 300 client with SAP*. When I tried using the SCCL to copy from 001 to 300 I get the following error
"A client copy run is currently active" If I click on the check mark, it takes me back to the main screen. If I try to display the client information with SCC4, and select edit, I get
"System error: Unable to lock table/view T000" Message no SV050
A system error occurred in lock administration. The data could not be
locked as requested.
Not finding much help with googling the error, so I am at a loss for now.
Any suggestions would be appreciated.Dear Les,
I am facing the same error. Could you please pass the solution you have received?
I would appreciate it.
Latest Update:
Ask yourself the following questions:
1. Did you modify any profile parameter before starting client copy?
2. Check whether sappfpar pf=<Instance Profile> check at OS level, this should give you if shared memory is sufficient or not.
3. Are you able to Launch RZ10?
4. Are you seeing errors in SM21 similar to
9:28:52 DIA 002 000 SAPSYS GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS GI 0 Error calling the central lock handler
9:28:52 DIA 002 000 SAPSYS GI 4 > Dequeue All call failed
9:28:52 DIA 002 000 SAPSYS GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS GI 0 Error calling the central lock handler
9:28:52 DIA 002 000 SAPSYS GI 4 > Dequeue All call failed
9:29:18 S-A 000 zdcadm E0 2 Program rslgsend Ended: o.k., SIGINT
I would suggest you taking a good look at the profile parameters changed or go back to your working Instance profile. This should resolve the issue.
Regards,
Ramanathan EKAMBARAM
Edited by: Ekambaram Ramanathan on May 28, 2009 4:49 AM
Maybe you are looking for
-
Apple tv cant see my itunes match songs, apple tv cant see my itunes match songs
I've set up itunes match on my desktop. Looking at the icloud status of each track its either matched or uploaded. On my iphone I can see all my itunes match tracks but on my apple tv, it says no songs found. Any ideas? I was thinking to reset all
-
Topaz Glow in Photoshop CC 2014
When I first downloaded Topaz Glow it worked, but I had to have my laptop cleaned of adware virus and since then I haven't been able to get Topaz Glow to work. Topaz support has been pretty good about working with me, but I think they may be stumped.
-
Apple support helpline not working
The apple support helpline number provided on apple.com for India ( +91-18004250744) does not exist. I need the working number immediately.
-
I deleted pictures from my camera roll using my computer since i didn't have enough space to back up my ipad in my 5 gigs of space. but after deleting a huge amount of pictures. the size of the camera roll is still the same as when i started. some of
-
How can i fix my side scratched i phone 5
My glossy side of my iphone 5 is scratced how can i fix it?