Query of info record

hi experts
As I know, there is a type of info record without material master,just need to input the material group.
I create such info record under a vendor and a purchase organization.but when I create a po.input the
relevant vendor,purchase organization and material group. but system ask me to input the price,I think
since I had create the info record,the po can capture the price from info record automatically. but acctually seems it is not working,.can anyone give some suggestion? thank you

hi Mark,
When you create the plant dependent PIR doc, that means it can be used only for that particular plant only, but when you create the POrg dependent, then it can be used for all the plant attached to that Porg...
Now, when you reference the PIR document, check whether you are providing the Inforecord number at the item level(or item overview level) as a reference...after entering the number press enter and then check details for Price...
Also, please confirm that the puchase group and unit of measure is maintained same as PIR document or not??
Also please confirm you PIR formation procedure from the below link:
[PIR w/o Material master|http://help.sap.com/saphelp_47x200/helpdata/en/75/ee107055c811d189900000e8322d00/frameset.htm]
Hope it helps..
Regards
Priyanka.P

Similar Messages

  • Query on Info record

    Hi All,
    I have query on info recor. When we create info record(Me11), I am not able to see candition tab on info record where we maintained price.
    Please let me know what is the problem, let me know incase need some  more information.
    REgards,

    Hi,
    Do you really mean the info-record or Purchase order.
    Normally if the item category is U, then conditions tab will not come in purchase order.
    Regards,

  • Report for Materials expired with price on Purchase Info Record

    Hi Experts,
    Can anyone of you advice a report in SAP that can identify the materials where the price has expired on Purchase Info Record.
    Thanks in advance.
    Regards,
    Nagarjun

    HI,
    ME1P will be used to monitor the changes in terms of pricing conditions you made to your info record via Transaction MEKP.
    In case of SA, you will have to build up your simple query by joining two tables A016 and KONP.
    Regards
    KK

  • Document Info Record

    Hi All,
    A PDF file is attached to SAP Document Info Record. While opening that PDF file through CV03N getting a messege like -
    "Error while executing C:\DOCUME~1\.................."
    What can be the reason for this & how it can be soleved?
    Regards
    MHP

    Hi Manish,
    You need to define application type in DC30.
    Kindly put suffix as .pdf and mime type as "application/pdf". This will activate the application pdf in the sap dms.
    if you found problem with other files do same and fill mime types properly. Aslo tick the start authorization field in same screeen.
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Price determination in PO from Info record

    Hi Guys,
    Can anyone help me to resolve following query?
    I have created a info record with General Data and Purchase Org data but did not maintain conditions in that.
    Then I created a PO and entered price manually in that and this PO updated in Purchase Org data 2 Tab of Info record but conditiion did not update in info record.
    Now I am trying to create a new PO and system should automatically determine price from last PO but it is not determining and asking me to enter price manually again.
    Condition type used in previous PO was PBXX(Standard).
    I am aware that Last PO does not update condition in Info record but then whats the use of this PO getting updated in info record. atleast next PO should take the price from last PO.
    Kindly help me urgently because i have stucked up with this issue.
    Regards
    Nitin

    Hello Nitin,
    As you have not maintained any price in PIR it should pick price from last PO, can you please check config at below path:
    SPRO>MM>Purchasing>Environment Data>Define Default Values for Buyers>Settings for Default Values>Select 01 (or whatever default value is assigned in your system)Go to price Adoption tab>Here it should be "Always Copy"
    Please check this and let us know what is mainatined in your system.
    Thanks,
    Yogesh

  • Automatic creation of purchase info record

    Hi friends
    I could not find check box in RFQ (ME41!N)or in Quotation (ME47N) for updating/automatic creation of purchase info record.
    Thanks
    Sunny

    Hi,
    you can maintain the info update for the required quotation through ME47.choose the required line item and click on the "item detail" icon and put the necessary value for info update:
    1-     No update
    2-A     Update with or without plant
    3-B     Update with plant (if no plant ban)
    4-C     Update without plant (if no plant requirement)
    Indicator: Update Info Record
    Determines whether:
    The purchasing info record for this vendor and material is to refer to this PO item, and
    The item is to be valid for the entire purchasing organization or just for the plant.
    Use
    The indicator determines which prices and conditions are suggested in future PO items.
    Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
    For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
    Procedure
    Enter the relevant plant key:
    A
    Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
    B
    Updating is effected at plant level if plant conditions are allowed for the plant.
    C
    Updating is effected without plant data if plant conditions are not necessary for the plant.
    Dependencies
    The level at which updating of the document number may be effected is defined for each plant.
    Hope this will clarify your query.
    Thanks & Regards,
    Bijay Pradhan

  • Customizing the Enjoy PO document overview for Purchase Info Records (PIR)

    Greetings!
    I am looking to use purchase info records to store material pricing information but we donu2019t want to lose the document overview functionality that SAP delivers with the enjoy PO screens (ME21n, ME22n, ME23n).
    Has anyone had success implementing user exit MEQUERY1 to customize the document overview so that a purchase info record query can be added to the document overview & the attributes of the purchase info record can be copied over to the PO?
    Iu2019d be curious to know what solutions other SAP shops came up with.
    Thanks.
    Richard Wortmann

    Nick,
    Thanks for the reply.  We will have the source list generated for the purchase info records (PIRs) however the gap I'm looking to solve for is mainly for non-MRP material buys. 
    Our current business situation allows material handlers to run a query in the document overview to ID specific materials on a purchasing contract (aka outline agreement) and drag those materials to the shopping cart on the PO.  This provides a very easy process for the buyer to ID materials & supplier relationships.
    Since we are moving away from purchasing contracts we want to continue with the same drag and drop process but only allow PIR's to be selected in the query.
    Looks like in OSS note 377180 SAP provides a user exit to implement this functionality (via MEQUERY1)- I'm just wondering if anyone has had success adding a PIR query to the document overview and creating POu2019s with reference to that query.
    Thanks.
    Rich Wortmann

  • Mass Change Of Vendor Code in Purchasing Info Records

    Hi All,
    I have one query and I already search a lot for it but didn't find any specific solutions.
    I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
    Is there any other way to mass change of Vendor in Purchasing Info Records.
    Why vendor field is showing me as a grey Field?
    Thanks In advance
    With Regards,
    Patanjali Bhagat

    Hi Govardhan,
    Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
    EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
    Still i think that we can not change the vendor id's once it is created for Info record...
    Pl correct me if am wrong.
    Uts

  • Vendor Hierarchy with Pricing from Info Record

    Hi All,
    We are currently exploring configuration options available to use a 'Vendor Hierarchy' for price determination during Purchase Order processing - R/3 46C
    We also have a specific business requirement that requires our Vendor Hierarchy node prices be maintained in an Info Record (using a 'PB00' type condition type) rather than the 'LH01' and 'LH02' condition types used to maintain price conditions directly in the Vendor Hierarchy.
    Does anyone know if it is possible to combine a Vendor Hierarchy with pricing that is sourced from Info Record rather than the standard 'LH01' and 'LH02' Vendor Hierarchy pricing conditions in the standard system?
    Thanks,
    Ravelle
    References:
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/12/08464f470311d1894a0000e8323352/frameset.htm">Vendor Hierarchy</a>
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/12/084676470311d1894a0000e8323352/content.htm">Vendor Hierarchy - Purchase Order Pricing</a>

    A solution has not been identified...query closed.

  • SQVI - Material to Document Info Record

    I am trying to create a query that gives me
    Material Number <b>(I tried MARA and MARC but MARA wont join and MARC produces no data when ran)</b>Document Type (DRAW-DOKAR)
    Document Number (DRAW-DOKNR)
    Document Status (TDWST-STABK)
    Once I have these I can create a report that shows me all materials that are not at a release status. I know 90% of the tables I need but when I create a join using the Document Info Record (DRAW) and any of the material master records MARA, MARC, MAKT, MEBW I end up with a join that doesn't work or a join that doesn't have a similar key to run.
    Any ideas?

    When you go into MM03 and look at any material and then go to the additional
    data tab and then select document data that gives you the documents associated with a part. If you then double click on any document that gives you the document status.
    I am trying to create a report that gives me all open production orders - the parts on that production order (which I can do) and then for every part to see which have documents that are on a certain status.
    Example you may be creating an assembly and the drawing on the document went from a 2 hole gidget to a three hole gidget. Well - production people don't know that the document has been re-issued and is being reviewed. This way they can run a report that shows them which parts on the Production Order are currently in review so they should not waste time a money on an assembly if the design is being tweaked.
    Because you can get to the document status from the material master there must be a link. I don't know where that is. I tried MARA, MARC, MKPF and MSEG and nothing links with the document. But there must be something that triggers that the document is attached to certain part.
    I just need to know what table that is......

  • Logic - Picking Up of Price for Costing purpose when 2 Pur. Info Records

    Hi,
    Having one Query related to Product Costing. If you can help out...
    2 Purchase Info Records are there for Same Material & Plant for 2 Different Vendors & Net Price is maintained in both Info Records
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4 (Validity of Inco Record - 28.04.2008 To 31.12.2008)
    2. Material M1 - Plant 1000 - Vendor B - Net Price Rs.3 (Validity of Info Record - 01.01.08 To 31.12.2008)
    Vendor A is Regular Vendor
    (Ticked as Regular Vendor is his Purchase Info Record)
    It is observed that Rs.3 is picked up for Costing Purposes
    Requirement is that - Net Price within Pur. Info Record of Regular Vendor i.e Rs. 4 must be picked up always for Costing Puposes.
    Is this possible???
    What Logic system uses while picking up the Price in case where there are 2 Pur. Info Records for same Material & Plant???
    Thanks & Regards...
    Ameya...

    Create procurement alternatives for the material for the vendor of choice using T.Code: CK91n
    Now assign a mixed costing proportion using CK94. In this screen, mark that vendor with 100%. Make sure you enter the correct Qty Structure Type and periods. If an entry exists for the other vendor, delete the tick to set it to 0%
    Now try costing your product.
    Cheers.

  • Purchasing Info Record

    Dear Group Members
    1. How Purchase info is created automatically?
    Purchase info record is not updated when we use ordering measure in PR
    (followed the instruction as per sap help)
    I donu2019t want to change Purchase info
    details as followed from SAP HELP DOCUMENT
    Message No : ME898
    UNIT H is not intentend as an order unit
    System Response:
    The system check whether the order unit you entered is allowed for this purchase order by comparing the order unit you entered with the order unit that the system determined
    The system check the potential source of the order unit in the given sequence. if a source is not available (if the purchase order is not referenced to a preceding document for example ) then the system checks the next possible source ( such as purchase requisition ):
    1 If you create a PO with reference to a proceeding document (PO, Contract or request for quotation), the system copies the order unit from the preceding document. The Var. OUn (variable order unit) indicator must not be selected in the Purchase info record
    2 If you create a po with reference to PR and the var, OUn indicator is selected in the purchasing info record, the system copies the order unit from purchase requisition.
    In Enjoy PR ( ME51N)you can maintain the order unit on the item detail screen on the sorce of supply tab. in the normal PR (ME51)you can maintain the order unit on the item details screen
    3 When the Purchasing info record for the combination of vendor and material exists, the system copies the order unit from the purchasing info record
    4 IF you create a purchase order with reference to PR and VAr .OUn is not selected in the purchasing info record, the system copies the order unit from the purchasing requisition
    5 If you create a purchase order with reference to a pr and their is no existing purchase info record for the combination of vendor & material , then the system copies the unit of measure from the PR item in the item overview.
    6 If you create a normal purchase order the system copies the order unit the material master
    7 When you create a stock transport order the system copies the unit of measure from material master
    8 If order unit and the unit of measure were not defined in the material master the system copies the material master base unit of measure
    You people guide me how can i update Purchase info record?
    I have Query to be solved .
    Regards
    Shamulheq

    Hi ! Jason M.  
    I checked the below configuration
    SPRO - MM - Purchasing - Purchase order - Define screen layout at doc.level - Select ME21N - details - administrative data, item - Info update (optional or required).
    In my configuration screen  Info update is optional
    Even though info records are not updated
    My Query
    PR Unit of measure is created in each, PO  had  created in each in the month of June & info records are in each fo the vendor
    Now the Purchase group realize that the PO should be in Days
    We made the changes in Material master ordering unit of Measure in days  DAY
    A) If we Crete PO system will not allow to save PO in days  but only allows to save in Unit of measure as EA
    B) If PO created by removing the info record  PO is saved in unit of measure as days with the same info record
    But info records are not updating  Pleas provide some solution solve this 
    Regards
    Shamulheq

  • Material Master,Vedor Master and Info record

    Hi
    When we create all these record, some of the fields are populated from one an other, so if we change these common field in one record, will it be changed itself in other record?like purchasing value key in MM and Info record are common so if we change this one in info record,the change in MM will be done itself or not and if not why?

    Hi,
    Let me take one example of reminder days only.
    Now material master's reminder days are specific and limited to that material only. for ex for material "007" reminder days are 3,6 and 9. that is in general.
    but when that material is provided by X vendor than reminder should be 4,7 and 11..than what?
    that should be maintained in info record. so info record is one level up for data maintenance. so if there is no info record, reminder days will be take from material master that is first level. but if you have maintained info record , means you want some specific data for that material when it is provided by any specific vendor..than reminder should be taken from info record.
    when data is adopted , first system checks info record than material master/vendor master.
    so when you create info record, some data are taken from master data ( material master/vendor master) but you can overwrite it base upon your need.
    than that data is fixed for that material n vendor..it doesnt change if you change master data...
    hope this solves your query..
    reward if useful.and revert if any doubt
    regards

  • Info record without material (EINA-MATKL). Tax code

    Good morning
    We need to be able to automatically define in the Purchase Order the tax codes when we are purchasing a free text item (without material master record).
    We are trying to do it by means of the info record for the vendor and material group, without the material. However the system is not able to determine this value.
    Please if you can help us to determine how we can automatically determine this tax code in a purchase order based on the material group, we would appreciate it.
    Thank you in advance and best regards,
    Alejandra

    Hi Steve
    Have a query here regarding Info record without material number (using material group).
    1) I understand we can create info record wihtout material number using material group . but doest it mean all the material comes under that material group and having same vendor will use single info record?
    2) What is Purpose of Sort Key while creating such a info record.
    3) As per my understanding for this type of info record system never update the price automatically using info record in fact for such PO we need to enter the info record number manually.? am i right? if yes then what is the purpose of creating a info record with material group if anyways we need to enter the info record manually.
    4) i am creating a PO but even after entering the info record number (which i have created for the ,material group and vendor combination) system is asking me to enter the price against PB00.
    regrds
    Yogesh

  • Extracting Purchse Info Records

    Hi All,
    I'm not sure where to put this request but I need to check if all our Purchase Info Records have the correct Inbound Delivery setting.
    Is there an easy way to extract the records for a particulatr plant into a spreadsheet?
    Apologies - I'm fairly sure I've put this request in the wrong forum.
    Colm

    Hello,
    You may create a Query (SQVI or SQ01) with Info Record tables EINA/EINE. The field you are looking for is EINE-BSTAE (Confirmation Control Key).
    Thanks,
    Venu

Maybe you are looking for