Query on Exchange rate field causing summation

Hi
I have used Sales Item cube. When i query in BEX on Sales order, item no and exchange rate it is perfect. But when i query only on Sales order no and Exchange rate. The exchange rate displayed is cumulative of all Exchange rates in items.
Ex. Sales order   item Ex-Rate
        15000001     0001 4.1
        15000001     0002 4.1
But when i query on SO and Ex-rate
    Sales order    Ex-Rate
        15000001    8.2
Instead should show me as 4.1 only.
Any help is higly appreciated.
Thanks.
A

Hi,
Exchange rate is the type of key figure that is difficult to report on. Even for the same order #, there may be different exchange rates applicable to different lines. Try to get the basic logic to apply exchange rates, the extractor may already providing the rates....if the rates are same for all line items or below that, then probably you can display the average ( try average of non-zero rows).
But I would suggest to derive the rates dynamically from the displayed value (after conversion) and the database value.
Hope this helps.

Similar Messages

New G/L Line item Datasource 0FI_GL_14 not extracting exchange rate field

Hi,
We are implementing new G/L Line item datasource and standarad field of this datasource KURSE - exchange rate field not extracting data.
Debugged standard extractor function module but field for exchange rate is not populating even there is a value in the base table BKPF.
Please advise on this.
Thanks
UDAY
Edited by: Udaybi on Apr 12, 2011 5:30 AM

Did you solve the issue? I am facing the same issue too.

Problem with EXchange rate field in MBEPOH structure

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure in LSMW.
Thanks in Advance ,
Harkamal

Maybe you can use Idoc PORDCR1 (Create Purchase Order) as import method in LSMW.
Exchange rate field (WKURS) corresponds to field EXCH_RATE in E1BPMEPOHEADER segment.

How to activate the "Set Exchange Rate" field in billing document header?

Dear All,
I would like to get the exchange rate at the time of the billing without changing the sales order exchange value.
The set exchange rate field is grayed off.
Thanks in adavance.
Regards,
Niketan

Hi,
This can be achieved using the copy control setting for billing at the Item level. The field is: PricingExchRate type
and the possible values relevant for you are:
C Exchange rate determination according to billing date
E Exchange rate determination according to current date
Hope this helps!
Thanks
Siva

Exchange Rate Field

HI Experts,
How to enable me to edit the exchange rate field in Ap Credit Memo? Coz i have diffrent rate in all transactions within a document....
Thanks.
Regards,
Danny

Hi Danny,
The field cannot be changed.
There should be no exchange rate difference posting as no money changed hands. You sent the Invoice, it was never paid, you clear it with a Credit Note.
For the stock in the movement, stock is always kept in Local Currency in B1, no exchange rate posting.
Hope it helps,
Jesper

Exchange rate field in va03

hi friends
where should i get the exchange rate field in va03 transaction....
can any one telme the field name plz...

This must be a good reading for you.
Difference in Billing Exchange rate(VBRP-KURSK) w.r.t OB08

Exchange rate field greyed out when i use custom PO order type

Hi!
Upon creation of PO using SAP standard order type NB, the field exhange rate is editable. While when i used csutom PO order type, it is greyed out. How can we edit this? Where is the configuration of the exchange rate per order type?
If this is configured in IMG please include path, on how exchange rate is configured.
Thanks a lot.

Hi,
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then check for field " Exchange rate "
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Opt. entry", So that You can get this field in Change mode in ME21N trx...
Thx
Raju

Exchange Rate Field - Frozen in Sales Order Header

Dear Fellows,
Can you please help me on this?
When we enter a standart sales order (J4211) , then in the header side of the order the exchange rate *(USD/TRY)* field comes as frozen and does not give any possibility to modify it. Because , it takes the daily exchange rates from (J00151)table. You cannot change the rate on the order.
The question is : how to enable it to allow the fx rate modification in the order header?
Many thanks in advance...
Regards,
Ozgur

Hi,
Can you please elaborate on what you mean by "picked up wrong exchange rate". Normally in the "Sales" tab in SO header you have a place where you can enter / see the exchange rate.
Regards
Sreekanth.

Exchange rate fields get failed when uploading data

Hi,
I have a problem when uploading purchasing data (2LIS_02_SCL) from R/3 to BW. Basically the exchange rate value is right in the PSA but NOT in the cube.
I just wondering what did they do when transfering the exchange rate data from PSA to cube. I have already checked the transfer rules and update rules, but no logic in there. So the logic should be ONLY pass the value, but somehow different value coming up.
Maybe you can have different think about this ?
FYI, I have already transfered global settings and exchange rates from R/3 to the BW. Is there any settings that I missed ?
Very appreciate of your help.
Thanks a lot
Martin Darmawi

Hi Roberto,
Thanks for your answer.
I think it has aggregation behaviour.
Do you know how I can avoid aggregation behaviour for a keyfigure ? Because I can't edit aggregation field and I tried to change the exception aggregation field with First Value, No Aggregation and Avarage value but it does not work.
Please let me know what you think.
Thanks and Appreciate for your help,
-Martin Darmawi-

Setting fixed the exchange rate field (KUFIX) ticked by default me21n

In the transaction ME21N to create purchase orders, there is a field to fix the exchange rate (KUFIX). We want to set this field to 'X' as default value, when the user call the transaction. Does anybody know a user exit or a BADI where I can modify/set this field.

Hello everyone,
I'm also have the same requirement.
Any way to set a default value to KUFIX field?
Thank you.
Anthony

Problem with Exchange rate field in MBEPOH in 4.7

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure.
Thanks in Advance ,
Harkamal

Hi,
Can you please check the valid date of that exchange rate and the goods receipt posting date?
Check in Purchase order also.
Regards,
Kumar

Set exchange rate field in billing document

VBRK-CPKUR (set exchange rate tick box). Anyone tell me wht this does? Is it driven from the billing document type? It is defaulted to checked for us and I don't want it to be. How can I change the default?
Points will be awarded.
Jon

hi,
<b>ID:Exchange rate setting (no new rate determ.in bill.doc.)</b>
Indicates whether the foreign currency exchange rate that is applied to the sales document is fixed or whether it can be changed during billing.
Procedure
The system can propose a value. You can change the value manually in the sales document. If you are allowed to change the exchange rate during billing, the system recalculates prices using the most recent exchange rate.
pl reward if it helps.
Thanks
Sadhu Kishore

Query Designer Exchange Rate

Hi All,
I have setup my own BI currency conversion type which i am using in my reports to convert from Euro to USD.
This currency conversion type is one flat rate so that for each specific month of my report it uses the same rate.
I am now maintaining a different rate for each month and I am looking to use this different rate for each month in my query by making my currency conversion type into a 'Variable Time Reference'.
This works well for fields in the format Fiscal Year Period(0FISCPER) and Calendar Month(0CALMONTH) e.g. 001.2010.
My problem is that my report columns are not in this format, I am using a combination of both 0FISCYEAR and 0FISCPER3 in the column selections seperately and therefore I am having an issue making this conversion type into a time reference variable as in the transaction RSCUR I seem to only have the option of using 0FISCPER or 0CALMONTH.
Any ideas on how I can make this work when the year and month are seperate fields?
Thanks
Flash

Hi,
You will have to design two currency translation types for T and T+1.
This design you should do in rscur transaction.
But you should be maintaining the currency rates in ob08 table in BI.
In rscur,you define your two currency translation types..Then these two
currency translation types(say x and y) has to be used with keyFigure
selling price..When you add selling price in keyfigure column, you can
see one currency translation tab for that key figure..add x as the currency
translation type.Similarly you can do for y too..
Please assign points if it helped you

ME21N : Mark the fixed exchange rate (field MEPO1226-KUFIX)

In the transaction ME21N to create purchase orders, there is a field to fix the exchange range (fieldname MEPO1266-KUFIX). We want to set this field to 'X' as default value, when the user call the transaction. Does anybody know a user exit or a BADI where I can modify/set this field.

Hello everyone,
I'm also have the same requirement.
Any way to set a default value to KUFIX field?
Thank you.
Anthony

Enable field exchange rate during billing

hi,
where can i configure that the field 'exchange rate' is enable during billing creation (VF01)
thanks in advance...
she

Dear She,
I just had the same requirement last week and I would like to share my solution.
1st of all enabling Exchange Rate Field is possible with the help of ABAPers but it is not advisable...
2nd thing is I assume that u maintain Exchange Rate in OB08 regularly as per requirement.
Now you have 2 options..
1) You can cancel the Billing Document and then change the Exchange Rate in Sales Order and again create Billing Document (B'coz Exchange Rate flows from Sales Order)
2) In Billing Document Exchange Rate can be redetermined based on your settings in VTFA or VTFL Copying Controls (Field is PricingExchRate type)
So if you have maintained Exchange Rate in OB08 system will redetermin it based on PricingExchRate Type Field.
If you have maintained in this field "C" - Exchange rate determination according to billing date
then if you will change Billing Date in Header tehn Exchange Rate will also get changed according to your OB08. But make sure that Billing Document is not yet posted into FI.
Hope this wil help..
Regards,
HP

Query on Exchange rate field causing summation

Similar Messages

Maybe you are looking for