Query regarding RSTXSCRP program

Hi All Form experts,
This is one doubt which is really confusing me.
When we export/ import a form using teh program RSTXSCRP, if the form has different languages, say EN, Ja and Chinese, if we want to export/import only one language version to/from our Pc, is it possible?
I tried exporting just the JA lang version of a form to my PC but again all the lang versions seem to be exported. Please find the screen shot/output of the program:
Language vector used: NEDO1J
Definition E exported
Original language E exported
Language J exported
Object was exported
Please Help me out in this regard.
Regards
Priya

Thanks Naimesh.
So you do mean to say that we can export/import only the original language version of the form and not the translated versions. Right?
If it is so, if the form has original lang as EN and 2 other languages in translation , say, JA or Chinese, then is it possible to import only the original language from our PC to SAP?
Regards,
Priya
Edited by: priya p on Feb 12, 2009 8:56 PM

Similar Messages

Query regarding the conversion of DME file in MT940 format.

Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advance

Hi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to find which Query is using program AQ10MM==========Z6============

Hi,
I wanted to know how to find out which SAP query uses this program. AQ10MM==========Z6============
I tried with SQ01/02 but was unable to get it. Can you please help.
Regards,
Mukund S

In my installation , it is usually AQZZ"usergroup"========QUERYNAME======
You could see if you have a user group 'MM' or '10MM' in SQ03 and set the user group if available.. then in SQ01, see if you have a query called Z6
Also try out this function module RSAQ_DECODE_REPORT_NAME to see if it would give you the user group and query name...

Query vs Z Program

Hi Experts,
Could you tell the difference in creating report in Query and Z Program....
Thanks in Advance
Regards
Vijai Jain

Hi Vijai,
The main difference with the select queries.
in the Query the all the select querys will be internally generateda as the SELECT.......ENDSELECT....
which is most performce issue.
but in the Z-Programs we usually write the selct queries as SELECT......
hope this small info will helps you.
Thanks

Query regarding moving components

I have a JPanel (call it panel1) in another JPanel which has setlayout(null).
i want to be able to "drag" around panel1 in the other panel.
i used a quick method of adding a MouseMotionListener to panel1, and under mouseDrag(mouseevent e) had the panel just reset its setLocation to the current getX getY coordinates.
This method does not work well, with the panel flickering abit, and not following the mouse too well, and even at some points jumping to a random location.
Whats the best way of achieving this?
thanks for any help in advance

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Converting SAP Query to Report Program

Hello Experts,
I'm stuck up with an issue.
I want to convert SAP query into a report program as the things which I need to implement is not possible with SAP Query anymore.
So I need to convert SAP query to Report program.
I'm very much aware about the SQ01--> Query --> More functions --> Display Report Program
But this Report Program generates is AQ..................... but if you see the code there will be buch of dynamic calls not as clear as ABAP code and not much flexibility to modify...
Please Provide a solution to this.
Regards,
Titiksha

Hi Bhange,
Glen Anthony has said very well and I support him. Even I suggest you to ignor the report generated with Query and develop a new report with the required business logic.
Regards,
Vijay

Query regarding moving transport request

HI all,
I have query regarding moving the transport request.
I have a main program with 3 includes. I have made some changes in the 1st include and transported it to the quality(testing). Now i made changes in the 2nd include and saved it in a different request(as request for the 1st include is already released). Now i am moving the changes of the 2nd include into the production. Here I want to know whether all the changes that i have made for the 1st include also will reflect in the production when the 2nd request is moved to production( incase of 1st include, only moved till quality) or only the changes made in the 2nd include will only reflect.
Kindly clarify as soon as possible.
Best regards
John

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Query regarding updation thru a Procedure

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru my Java application.
The submit procedure saves the XML data in the database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by adding new elements to the same row.This row now contains additional XML elements.
I would like to display the new row with the new elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru
my Java application.
The submit procedure saves the XML data in the
database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by
adding new elements to the same row.This row now
contains additional XML elements.
I would like to display the new row with the new
elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with
the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,If you delete (it seems to me yours this process is regular and frequent) and re insert the new updated one record then High water mark will cause to scan yours table which may cause to degrade the performance.AFAIK you should go with update.But hold down dont implement it as i suggested lets see what are others solution here which may be more precious then mine.
Khurram

A query regarding synchronised functions, using shared object

Hi all.
I have this little query, regarding the functions that are synchronised, based on accessing the lock to the object, which is being used for synchronizing.
Ok, I will clear myself with the following example :
class First
int a;
static int b;
public void func_one()
synchronized((Integer) a)
{ // function logic
} // End of func_one
public void func_two()
synchronized((Integer) b)
{ / function logic
} // End of func_two
public static void func_three()
synchronized((Integer) a)
{ // function logic
} // End of func_three, WHICH IS ACTUALLY NOT ALLOWED,
// just written here for completeness.
public static void func_four()
synchronized((Integer) b)
{ / function logic
} // End of func_four
First obj1 = new First();
First obj2 = new First();
Note that the four functions are different on the following criteria :
a) Whether the function is static or non-static.
b) Whether the object on which synchronization is based is a static, or a non-static member of the class.
Now, first my-thoughts; kindly correct me if I am wrong :
a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisation, since in case obj1 and obj2 happen to call the func_one at the same time, obj1 will obtain lock for obj1.a; and obj2 will obtain lock to obj2.a; and both can go inside the supposed-to-be-synchronized-function-but-actually-is-not merrily.
Kindly correct me I am wrong anywhere in the above.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation.
Kindly correct me I am wrong anywhere in the above.
c) In case 3, we have a static function , synchronized on a non-static object. However, Java does not allow functions of this type, so we may safely move forward.
d) In case 4, we have a static function, synchronized on a static object.
Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation. But we are only partly done for this case.
First, Kindly correct me I am wrong anywhere in the above.
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".
Another query : so far we have been assuming that the only objects contending for the synchronized function are obj1, and obj2, in a single thread. Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.a; and again obj1 trying to obtain lock for obj1.a, which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed. Thus, effectively, our synchronisation is broken.
Or am I being dumb ?
Looking forward to replies..
Ashutosh

a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisationThere is no synchronization between distinct First objects, but that's what you specified. Apart from the coding bug noted below, there would be synchronization between different threads using the same instance of First.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.obj1/2 don't call methods or try to obtain locks. The two different threads do that. And you mean First.b, not obj1.b and obj2.b, but see also below.
d) In case 4, we have a static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.Again, obj1/2 don't call methods or try to obtain locks. The two different threads do that. And again, you mean First.b. obj1.b and obj2.b are the same as First.b. Does that make it clearer?
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".That's what happens in any case whether you write obj1.func_four(), obj2.func)four(), or First.func_four(). All these are identical when func_four(0 is static.
Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.aNo we don't, we have a thread trying to obtain the lock on First.b.
and again obj1 trying to obtain lock for obj1.aYou mean obj2 and First.b, but obj2 doesn't obtain the lock, the thread does.
which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed.Of course it won't. Your reasoning here makes zero sense..Once First.b is locked it is locked. End of story.
Thus, effectively, our synchronisation is broken.No it isn't. The second thread will wait on the same First.b object that the first thread has locked.
However in any case you have a much bigger problem here. You're autoboxing your local 'int' variable to a possibly brand-new Integer object every call, so there may be no synchronization at all.
You need:
Object a = new Object();
static Object b = new Object();

How to know , that an index is used in query in the program

Hi All
I have found a SELECT query within a program , which needs to be tuned. I need to justify client of my change. He wants to know how many indexes are there used in the select , as well as which indexes are partially used and how we can optimize use of indexes,
I did an trace analysis of program using ST05, however I am not getting to know which index is used in this trace analysis.
I need help on these points from you all.
Thanks in Advance
Amol

Hi
After clicking DDIC information
I am getting 3 buttons on the top, and below I am getting
Overview of View WB2_V_MKPF_MSEG2
Obj. name                   WB2_V_MKPF_MSEG2
SQL Object                  WB2_V_MKPF_MSEG2
Table Type                  VIEW
Buffering                   Buffering not allowed
Short Text                  Data Selection from Material Documents (without WBGT)
Classification                         Other
                                       Other
                                       Trading Execution Workbench
Author                      SAP
Last Changed By             Not Found
NametabRec.Length                 2436 Byte
Last DB Analysis            00/00/0000
No. of records                     0
All Table Indexes of View                WB2_V_MKPF_MSEG2
Name   Description                                                    Created by     Unique
Indexes of MKPF
0      Primary key                                                    SAP            X
BUD    Index for posting date                                         SAP
Y      Fiscal Year, Posting date and Doc. number                      AJOSHI
Indexes of MSEG
0      Primary key                                                    SAP            X
M      Material documents for material                                SAP
R      Material docs for reservation                                  SAP
S      Reversal documents for mat. document                           SAP
However from above I am not getting which index is being used or not. OR which is used fully or partially .. like that,
I need to know these details
Thanks in Advance
Amol

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Query regarding Cluster nodes in CC

Hi Experts,
We have a query regarding the cluster nodes available in the CC monitoring.
Can two nodes of a same channel can poll at the same time?
Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
Thanks
Suganya.

Hi,
There is an answered thread on this
Processing in Multiple Cluster Nodes
Regards,
Manjusha

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Query regarding App V Deployment - (Deploying DriverMSI in App - V)

Hi All,
This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI using
the DeploymentConfig.xml file but its not happening.
I have tried writing script in DeploymentConfig.xml in AddPackage Tag as shown in the below commands where I have added driver MSI in sequenced package, and tried deploying the DeploymentConfig.xml in powershell during Add-Package event but the driver
MSI is not getting installed in Client machine.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
The other way I have tried is writing a vbscript for installing the driver MSI, added the vbs in sequenced package and called the same in DeploymentConfig.xml but no luck.Please find the command below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
Please suggest any method to make this successful or kindly let me know if there is any mistake in the script.
Thanks in advance,
Vivek V

Hi Nicke,
These are the following methods and steps that I have performed for installing Driver MSi.
Method 1:
1. Included the driver MSI in Package Files Tab in sequencer and called the same MSI in DeploymentConfig.xml using the below script.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
2. After the above steps, deployed the AppV package along with DeploymentConfig.xml in App V Client using the commands mentioned below.
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
after trying the above steps the driver MSI is not getting installed.
Method 2:
1. Included the driver MSI and a VBS file(VBS contains script for calling the driverMSI)in Package Files tab in sequencer. Commandlines has been provided calling the vbs file in DeploymetConfig.xml as mentioned below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
2. after executing the above steps, tried deploying the AppV file along with DeploymentConfig.xml using the commands mentioned below,
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
evenafter trying the above methods the driver MSI is not getting installed. Hope you can understand my explanations above.
Regards,
Vivek V

Query regarding RSTXSCRP program

Similar Messages

Maybe you are looking for