Query regarding moving transport request

HI all,
I have query regarding moving the transport request.
I have a main program with 3 includes. I have made some changes in the 1st include and transported it to the quality(testing). Now i made changes in the 2nd include and saved it in a different request(as request for the 1st include is already released). Now i am moving the changes of the 2nd include into the production. Here I want to know whether all the changes that i have made for the 1st include also will reflect in the production when the 2nd request is moved to production( incase of 1st include, only moved till quality) or only the changes made in the 2nd include will only reflect.
Kindly clarify as soon as possible.
Best regards
John

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Similar Messages

Find Query Name in Transport Request or In TR what are Queries.

Dear All,
I would like to find a Query Name in Transport Request(DEVK.....) or Vice-Versa in Transport Request (DEVK........), what are the queries are included. I created SAP Query using SQ01 and assigned the InfoSet. The query is succesfully executing and getting the required result but I dont know the Transport Request Number which was created. In stead of creating New request, I would like to know the existing Transport Request what are the Queries are assigned.
Regards,
Ujed.

Hi
If you have included the Query in Transport using SAP Query Transport tool, it creates Transport request and makes an entry in the table AQTDB. Check the table entries in the table AQTDB.
~~~Ganesh Kumar K.

How to collect the deleted query in a transport request.

Hi Friends,
I have created a query and transported it to the Quality, the data content is all ok, except that i have not used the Project Naming conventions. Now i have a defect against my name for this. I have to copy the same query with the correct Naming convention and transport it.
My question is after copying the query with correct name i have to delete the old query (if not there would be 2 versions of the same query). How do i collect the deleted image of the query in a transport and send it to quality?.
I tried deleting a test query from Bex Designer, but this does not ask me for a transport. should i use RSZDELETE?. Not sure if it asks for a transport request when i delete the query.
Can someone pls tell me how to go about this?.
Thanks in advance.
BN

Hi BN,
I do agree that deleting directly in Quality and Prod is not good way and not recommeded.
I have not tried and deleted.But if the system is configured in such a way that if it doesnt ask for a request
then i feel you have no option.
If any object is deleted then you must have the deletion image collected into request at the same point when you are deleting.Because later when we go to transport connection we wont find the object itself.
What i think from your point as you said you have done earlier is you must have any open request regrding this query and when this query is deleted , the deletion image is also included in the same request.
So go to se03 and give your deleted query name and check all the requests.
Check in the requests when the deletion image is captured or not. we might be knowing that this is cpatured.
Regards
vamsi
Edited by: vamsi talluri on Nov 9, 2010 9:14 PM

Query regarding moving components

I have a JPanel (call it panel1) in another JPanel which has setlayout(null).
i want to be able to "drag" around panel1 in the other panel.
i used a quick method of adding a MouseMotionListener to panel1, and under mouseDrag(mouseevent e) had the panel just reset its setLocation to the current getX getY coordinates.
This method does not work well, with the panel flickering abit, and not following the mouse too well, and even at some points jumping to a random location.
Whats the best way of achieving this?
thanks for any help in advance

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Looking to confirm the successfully MOVED Transport Requests & their order

Hi,
I have manually ordered about 20 requests which were successfully transported from Dev to Quality; After 6 months of testing, I now need to move them to production.
Is there a way to know these objects which were successfully moved by Basis to Quality in the order in which they were moved (Those days there were a number of them which failed and had to be fixed released again on Dev, etc. so it has become a bit confusing)
Thanks

Hi,
Thanks for the input but I already checked se09 in DEV and it gives which transport requests I released.
But note that it is not request that I released that got moved to Quality.
Also, even for those which were moved, under Released, it only gives me the ORDER in which I released the requests and not the order in which Basis MOVED the physical objects to Quality
Finally, you said to
"...make sure all are transported in QA already to keep in sync ..."
what did you mean by "in sync"?
Thanks

Query regarding extended transport control

Hi All,
I read about extended transport control and I get very confused.What exactly it means.
I have a 3 clients in my DEV system xx0,xx1,xx2, only one in QA and one in PRD.
Now when searched I found..
'when you release a change request in DEV Client xx0
it will not only automatically be added to the Import Queue for QAS but also xx1,xx2 of DEV'.
We donot have extended transport configured but still I can see same number of request in the import
queue of all the 3 DEV clients.If the above is right then why is this happeing with my landscape or
have I missunderstood it?
We use Tcode SCC1 to copy client dependent request in other clients. So if an extended transport
is maintained, will that happen automatically?If not then how extended transport is useful.
Please share your ideas and help me.
Regards,
Ashutosh

Hi Sharath,
Thanks a lot for ttaking out your time to help me.You said
Mostly this kind of set up will be helpfull in scenarios where there are more than one
client in QA and PRD systems as becase if you release a request in development system and
if you are having three clients in QA systems, then you will transport the request in one client
and say if you need to have the same kind of changes in other two clients also then you need
to manually use SCC1 and copy the changes if extended tranport is not configured. If extended
transport management is configured then once you release the request in DEV then it will get
added to queue of all three clients in QUA and can be transported using STMS_IMPORT TCode
Thats what making me confused.
In dev we have 3 clients. We use SCC1 to copy the configuration to client xx1 and xx2 from client xx0.
    My doubt is if we have an extended transport,request will show up in the import queue off all the development client.
    So to have the same configuration we have to use STMS_IMPORT to import the request in xx1 and xx2 or SCC1.
    If that is the case then it means there is no use of extended transport control in setup where we have multiple clients
    in DEV server and only one one in Quality server and PRD server.As we will ultimately be using STMS_IMPORT (if extended
    transport is configured) or SCC1(if extended transport is not configured) to import the request in xx1 and xx2 of DEV server.
    Same goes for multiple clients in QA or PRD, as here also we can use STMS_IMPORT (if extended transport is configured)
    or SCC1(if extended transport is not configured) to import the request among different clients.Means I have to use one tcode,
     either STMS_IMPORT or SCC1, then how it is helpful?
Since your target QA and PRD are having only one clients then there is no need to worry about t
           his untill you are comfortable with copying the changes in other two clients of DEV system using SCC1.
    My doubt is if extended transport control is configured can the configurational changes doen in our DEV xx0 be automatically
    gets replicated in client xx1 and xx2?
   Request you all to please help me with your valuable suggetsions.
Regards,
Ashutosh

Regarding Modifiable Transport Request Objetct name .

Hi All,
I have a requirement to get the transport request object names into a internal table.
I have a table E071 which has all the object names for the request. But my problem is to there is no record found for the transport which are in modifiable status. Can anyone suggest me at the earliest.
Thanks.
Rani.

Hi,
Check E07* Tables
Regards,
Santosh

Moving Transport Request ID

Hi,
I want to move my Transport Request ID from one project to another. By mistake it is not assigned to any project it is saved as local object , now I want to move it to another project, so that I can release my task.
How is it possible ??
I will definately reward points for this.
Rgds,
Anid

Hi,
if you have saved as local object then package will be $tmp.
for suppose you have saved the report as local object.
Now follow the following path to place it as a task in request number of project you wish.
in se38 goto --> object directory entry.
now here you have give the package name differently not the $tmp. now press the change button in the popup window and change the package and press save.
Now it will ask for request number.
if you want to place as a task in the already created reuest number then select own requests and select the request number in which you want to place. then this will be placed as task. otherwise if you want to create a new request number for this then choose create then it will be placed as task in the newly created reqyuest number.

Regarding Table Transport request

Hi,
I have created a table in local. Now i Like to move into a transport rerquest How?
Please tell me.
venkat

use se03 tcode
click on change object dirctory entries
tick the check box of R3TR TABL and enter table name
in below further restrictions
enter package as $tmp
then execute
click on ur table name and click on objects menu-->change object directory and enter the package name
and then activate ur table then it will ask TR no
so u can assign a Transport request no now

Query regarding CMS transport!

Hi Experts,
I hav an issue with CMS transport. - I hav done certain changes in a mapping for a specific name space say urn:XYZ. The software component for this name space is say SC1. This software component also contains several name spaces say urn:123. urn:456. urn:pqr. And some of them are active and some inactive
Now as per process, I hav activated my specific messege mapping and then going to TOOLS- Export Design Objects - Mode: Transport Using CMS. -- Individual Objecis -......
Now when I go to the CMS url....there after carrying out the necessary steps [ Pls refer to the following URL.This thing WILL take some time as it is a 2.5 MB file :
http://www.esnips.com/doc/34d643fe-13b3-4c83-922a-c64db6b7e52d/Change-REQUEST-CMS-Process,-manual-Complete.
It contains a word document with details step by step screen shot showing everything in details -- see page 17 and 18. I dont understand , why in the approval tab, the SOFTWARE COMPONENT name is suggested, the reason being, if i select the SOFTWARE COMPONENT, all other name space within this SOFTWARE COMPONENT apart from my desired development get trsnaported in Production!!
EXPERTS, Pls check the doc in details,this is a kind of general manual and tell me if I hav missed out some thing/ or hav done some mistakes , I think this can be a gud document !!
Pls note, dont study the document by the NAME oF DEVELOPMENT perspective, I hav developed this doc from time to time with necessary changes / modifications !!
Regards,
Arnab.
Experts, this question still remains unanswered!
Edited by: Arnab Mondal on Oct 15, 2008 9:25 AM

Hi Suddha,
, it took me some time to prepare myself some answer.
the conversation!
Hi Arnab not a prob. I have not got a chance today to see your latest post on the thread, was busy with some stuff throughout the day.
+ Once Again Suddha , you managed time for me,, let me tell you, mine is not a very urgent issue, but YES, I want to get to the root of it!!!+
As you have said that, you see all the objects in the Assembly Tab page, then do one thing, right after you assemble the specific component, refresh the tab
and check if the other components get removed from the list, under Assembly Tab.
Well, tet me tell you some thing, in my process, I DONT Assemble the Specific component . Let me make this part clear to you . Let me tell you the steps, I
follow in details .
1. Once the change is done in the mapping- I transport it as INDIVIDUAL OBJECTS, through CMS Transport.
2. Log in to the Chanhe Management service!
3.Click on the appropriate TRACk-- that is track for integration repository
4.Click on teh aassebbly tab -- an assembly option arrives -- I select the " same suppot packages number as the last support package number!-- then click
on the ASSEMBLE button.
5. As a result of this all the 4 software components come into the list.
Here I select the appropriate SCV by selecting the LINE. Pls note I dont go to the SELECT Comonent button and select individual SCVs.
6. After selecting the LINE, I go to the approval tab, there I get to see all the SCVs, with severl datse. Here, I again select the appropriate SCV of mine based
on day and time. I select the LINE-- then click on the CONFIRM button. As a result of which i get to see APPROVED, for that SCV.
7. then I go to PRODUCTION TAB , again select the appropriate SCV line and click on the IMPORT button.
These are my steps. This is what I was tought . And now i feel , I missed certain steps .Pls correct me !
Then I must say that somehow you are assembling all the software components, somehow all the components are getting selected. I am having another
doubt, if the components have dependencies, could that be the reason for this?
Well as I described in step no 4 and 5 that I Do select the appropriate SCV in teh Assembley tab, by selecting the line but do not select it through "SELECT
Comonent button and select individual SCVs. Is this where I am going wrong????
Again, as far as the Integration Repository developments are concerned, no two SCV has any dependency, I am sure about that, the major factor being, the
3 SCV that I am working on are CUSTOM SCV.!
One more thing................if you are not going to the consolidation tab and importing the components into consolidation system, how are showing up in the
assembly tab. Strange! don't you think so? You need to follow the sequence of steps. Are you sure you are not referring to some older transports?
Well, this part ,I can smell RATs. Actually in my system I only have a PI develoment and PI production server. This is my first XI proj, and the above 7 steps
were all what I was told as necessary to send developments to Production. I hav absolutely no Idea of the utility of the CONSOLIDATION TAb, and the funda
of importing the components in the consolidation system. I donno anything about the installation of this CMS- Transport studio.But i can speak to the basis
team, and tell you , if you want to know about any specific basis settings.!!!
You need to follow the sequence of steps.
Pls tell me what am I missing !!
Are you sure you are not referring to some older transports?
That is not possible as I can check the date and time. all 3 SCV s have the same date and time. It is in the approval tab, I select the appropriate SCV and
send it for Production!!!
Regards,
Arnab .
Edited by: Arnab Mondal on Oct 20, 2008 11:43 AM

Query regarding Down payment request

Hi,
can down payment request processed with periodic billing plan? I checked the help.sap.com but there its mentioned with milestone billing plan.No where its mentioned whether its possible t process with periodic billing plan or not?
Only constraint is mentioned down payment request can only be processed with billing plan and for order relevant invoice.
Regards,
Bedayan.

This is a new question related to Down payment request
I have the following scenario.
Please advise on how to implement this process using contracts and sales orders.
Customer buys a warranty contract for a specific period of time say 1 year and pays 100% Down payment
This Down Payment must not be posted to revenue account. It should be posted to Down payment
During contract validity time, free of charge services and spare parts are delivered to customer when a customer has a problem.
When services or spare parts are delivered then post to revenue account. E.g 10% of down payment is posted to revenue. Amount on down payment account is reduced by 10%.
Which type of contract and sales process can be used for this scenario?
Note at the time of closing the contract, the spare parts to be delivered are not known.
Many thanks for your help.
Regards,
MKW

Regarding the Transport request

hi all,
I have been assigned two objects with two different TR. What i have done is i saved one object under the Request which is created for another object. Now please give me n e suggestions to save under the correct request. Any help would be highly appreciated.
Best regards,
Subhakar

Hi Ramineni,
Go to SE09 transaction. Display your request and click on display the objects in the request. Delete the object from the request by selecting the row in the table control.
Go to your other transaction number and say display the object in the request and add your program using add entries in the table.
That solves the problem...
Correct me if I am wrong.
Regards,
Ramesh S
*Award points if reply is useful

Problem in moving transport request

Hi,
While performing transports at OS level, we are facing some error.
below is the log. Please look into this issue.
We have already trigged manually RDDNEWPP and
SAP_TRIGGER_RDDIMPDP from client 000
>tp import pf=TP_DOMAIN_FD3.PFL FD3K915202 FT3 CLIENT=010 U01268
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: The following call returned with exit code 236:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
We have also manually triggerred RDDIMPDP via sapevt from OS level. But issue still persist.
There is no error in Import log and import history. But we are getting the below error in slog.
WARNING: System FT3. Warning.        20090602114617 :
ERROR:       The following call returned with exit code 236:
ERROR:         sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
The error in dev_evt is as follows:
Tue Jun 2 09:51:58 2009
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
ERROR ***: Cannot determine mshost
Please suggest..................
Thanks,
Sourav Misra

I have resolved the problem........
As per SAP note 821875 point 2(Security settings in the message server), MSEACCESSDENIED (or rc= -20) errors message can occur if the parameter rdisp/msserv_internal is not defined with 0 value
We have removed rdisp/msserv_internal from instance profile, and add it again in the DEFAULT profile with 0 value. Remember that, after this, it's important to check that the value has been correctly   changed in the correct file DEFAULT.PFL
After this, we have restarted the instance.
I have attached also the following SAP note for information:
826779 - sapevt (Version 5): Security settings in the Msg.g.
                        Please maintain the RDDIMPDP in all clients with user
                        DDIC in accordanceof note 11677. Goto SE38, use RDDNEWPP
                        to schedule RDDIMPDP on client
                        000 and other client with DDIC user.
Thanks,
Sourav Misra
IBM

Assigning a SAP Query to Transport Request

Hi Friends
I have a SAP Query, now I want it to transport to the other system, while saving the query it is not prompting for transport request. Is there any possibility to assign that SAP Query to a transport request, if yes, please let me know the process.
Regards
Praveen

Dear All,
This regarding creation of SAP Query .
Situation:
Infosets and User Groups were created in a DEV SERVER CLIENT 200 and saved in a request ie.REQ01
Now i wanted to create a Query QU01 in the Same User Group in DEV SERVER CLIENT 210 so i tried creating a Infoset but i get this error message
Note: I am not able to create & save an Infoset.
Message no. TK414
Diagnosis
You cannot edit request D01K901880 of user X00012, since this request is reserved for changes in client 200. You are logged on to client 210.
Can anyone clear this error? what is the solution?
Thanking You
Andrew

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Query regarding moving transport request

Similar Messages

Maybe you are looking for