Query result help

I have this out from a query
Doc No.   GL Code         Credit     Debit
<b>1             500000            100
2             500010            200
6             700000                        -100
7             700001                        -200
...            ..........            .....        .....</b>
User wants the credit and the debit come on the same line asnd if we look as the table the GL account is different for both and I was wondering is there a way to do this.
Thanks, I will assign full points.

The problem seems to be that you are drilling down by Doc No. and GL Code, but these have different values for the 4 rows. If you want the Credit and Debit values to show on the same row, you will have to find other characteristic(s) (e.g., Company, Accounting Doc, Doc Date, etc.) where there are common values for the rows you want to "combine", and change the drilldowns to those characteristic(s).
For example, if Doc Date is the same for the rows you want to show on one line, then the result might look like this:
Doc Date ... Credit ... Debit
01/01/2007 . 100 ...... -100
01/02/2007 . 200 ...... -200
Hope this helps...
Bob

Similar Messages

Need help on retrieving query result - NPE

Hi, I could get results with the native query in my TOAD, but I can't get it working in my session EJB. I tried both native query and EJB ql. The query created fine, as soon as I try to retrieve results, it gets stuck.
My native query looks like this:
Query query = em.createNativeQuery("select sum(o.amount_reimbursed) from t_expenses o where o.employee_id = '999999911' " +
"and o.EXPENSE_ID in (select p.expense_id from T_Per_Diem_Xref p where p.expense_Type_Xref_Id=22 " +
"and p.expense_Id in (select e.expense_Id from T_Expenses e where e.employee_Id='999999911' " +
"and e.expense_date > to_date('01/01/2011', 'mm/dd/yyyy') and e.expense_date < to_date('12/31/2011', 'mm/dd/yyyy')))") ;
My EJB query looks like this:
Query query = em.createQuery("select sum(o.amountReimbursed) from TExpenses o where o.employeeId = ?1 " +
"and o.expenseId in (select p.expenseId from TPerDiemXref p where p.expenseTypeXrefId=?2 " +
"and p.expenseId in (select e.expenseId from TExpenses e where e.employeeId=?1 and e.expenseDate>=?3 and e.expenseDate<=?4))");
query.setParameter(1, employeeId);
query.setParameter(2, expenseType);
query.setParameter(3, fDay, TemporalType.TIMESTAMP);
query.setParameter(4, lDay, TemporalType.TIMESTAMP);
Either one, I get NPE at the line retrieve result.
// sumAmt = (Double)query.getSingleResult();
List list = query.getResultList();
if (list != null) {
long longAmt = (Long)list.get(0);
sumAmt = (Double)list.get(0);
As you can see, I tried to getSingleResult, or getResultList. also tried to convert the result to Double or Long. None worked.
Please help and thank you for your time.
Sophia

Frank, thank you for your reply. I have this code in my session Facade EJB, and I get the NPE in my backing bean which calls this method. When I debug the code, it appears what really cuases the problem is in this code on the line I try to assign the query result to my variable 'sumAmt = (Double)query.getSingleResult();'. In the debug, when it reaches this line, it starts to give me all kinds of pop-up windows saying couldn't find this file or that file or packages. If I get a stack trace later, I will post it. Right now I am trying to fix something else.
Thanks, Sophia

Query results display help

Hello
I'm having a issue with displaying the results of my query output.
When I cfloop over the results.. the part number is being output on 3 different rows... when I want it on one row querying multiple tables.. and you cant use the group option with the cfloop
here is the query
<cfquery datasource="wire" name="testss3">
   SELECT a.part AS pparts, a.wireid AS wireidA, a.strnds, a.wt, a.sps1, a.sps2, a.sps3, a.tin, b.slookup AS lid, b.wireid AS wireidB, b.reelid AS reelnmbr, d.reelid AS rlid, d.rname, d.rsku, d.rcost, e.plookupid, e.prctid, e.wireid AS wireidE, f.prctid, f.percentage, g.rsize
   FROM Mpart a, slookupt b, reeltbl d, prctlup e, prct f, spoolsize g
   WHERE a.wireid = b.wireid AND e.prctid = f.prctid AND a.wireid = e.wireid AND b.reelid = d.reelid AND g.spoolSizeid = b.spoolSizeid
   </cfquery>
<table border="1" border="1">
<tr>
        <td></td>
        <td bgcolor="#CCCCCC" class="style23">Part No.  </td>
        <td bgcolor="#CCCCCC" class="style23">Wt./Mft.</td>
        <td bgcolor="#CCCCCC" class="style23" colspan="3">Spool Sizes (Cost/ft.)</td>
        <td> </td>
      </tr>
   <cfloop query="testss3"><cfoutput>
     <tr>
        <td></td>
           <td align="left" class="style23">#pparts# @</td>
            <td align="left" class="style23">#wt#</td>
           <td align="left" class="style23">
            #rsize# #rcost# #wireidA#</cfoutput></cfloop></td>
        <td> </td>
       </tr>
</table>
Part No.
Wt./Mft.
Stock Spool Sizes (Cost/ft.)
10 sol @
31.43
1000 2.8000 1
10 sol @
31.43
2500 5.9800 1
10 sol @
31.43
5000 7.3000 1
10T @
31.43
1000 2.8000 2
10T @
31.43
2500 5.9800 2
10T @
31.43
5000 7.3000 2
8 sol @
50
500 2.8000 4
8 sol @
50
1000 5.9800 4
8 sol @
50
5000 7.3000 4
8T @
50
500 2.8000 5
8T @
50
1000 5.9800 5
8T @
50
5000 7.3000 5
the first row should read 10 sol | 31.43 | 1000 | 2500 | 5000
the next row 10T | 31.43 | 1000 | 2500 | 5000
Any help would be much appreciated!
Thanks!

Hi Dan
When i use the cfouput with the group attribute... the query only returns one of the columns from the table for stock spool sizes...
so the new query results will have 1 part which is good 10 Sol | 31.43 | 1000
but only 1000 .. when it should return 1000 | 2500 | 5000 based on that wireid
Thanks

Help assigning a   calculated arbitrary ID to a query result set

Given the sample query result..
(sorry about the formatting of the output)
GROUPID LAST_NAME FIRST_NAME INITIALS EMAIL PHONE count(PHONE)
GP2001 Troy Diana s [email protected] 123-456-7890 2
GP2001 Troy Diana s [email protected] 123-456-7890 2
GP2006 Thomas Carl p [email protected] 789-100-1112 1
GP2007 Riker William T [email protected] 866-908-6654 1
GP3001 Laforge Jody m jlaforge@enterprisenet 456-789-9000 3
GP3001 Laforge Jody m [email protected] 456-789-9000 3
GP3001 Laforge Jody m [email protected] 456-789-9000 3
GROUP_ID is a calculated field from a select statement.
Individuals with one phone number (ph_cnt = 1)
is assigned an arbitrary unique GROUP_ID.
Individuals, appearing more than once, with more than one phone (ph_cnt > 1)
are giving the same GROUP_ID.
I was thinking of using a case statement in this case...but got stuck on generating the GROUP_ID based
on the phone count.
select case
when ph_cnt = 1 then select 'GP'||to_char(sysdate,'hhmisssss') from dual)
when ph_cnt > 2 then <assign a unique group_id to each set of duplicates/triplicate...etc>
end GROUP_ID,
last_name,
first_name,
initials,
email,
phone
(select last_name,
first_name,
initials,
email,
phone,
count(phone) ph_cnt
from my tab
group by
last_name,first_name,initials,email,phone)
Edited by: ch**** on Apr 25, 2011 7:20 AM

Try this,
SELECT 'GP' || 1000 + DENSE_RANK () OVER (ORDER BY phone ASC) groupid,
       last_name,
       first_name,
       initials,
       email,
       phone,
       COUNT (1) OVER (PARTITION BY phone) ph_cnt
FROM my tab;G.

Getting query results from a PL/SQL procedure

Hi! So, I’m a little stumped and I can’t seem to find the answer to what I believe is probably a simple question…
So, here goes… I have a big ol’ union query that I use to create a report on a page, it’s about 25k – not over the 32k limit, but fails to be able to compile every time (I always get a 400 – Bad Request error). I’m not sure why this is happening, but I can remove a union statement and it compiles just fine – so it has something to do with the size of the query. ANYWAY – I’ve resolved that I should put this bad boy into the database as a stored procedure and just call it from Apex, my problem is I can’t figure out quite how to do this with variables, etc.…
Instead of giving you my whole big query, I’ll use the emp table as the concept is the same:
Say we have a query that creates a report on a page:
select empno, ename, job, mgr, hiredate, sal, comm, deptno
from emp
where job = :P_JOB
and hiredate >= :P_HIREDATE;
How would I take this query, create it as a stored procedure on the db, pass the variables from Apex and return the query result set from the stored proc as a report?
I really appreciate any help on this!
Best,
Gilcrest

Hi Gilcrest,
You should create the query as a View and use the view name and the WHERE clause in the report's sql source.
Andy

Sending email using PL/SQL based on a query result

Hello all,
I want to create a procedure using PL/SQL, based on a query result.Here is the scenario:
I have multiple tables in Target and Source databases that I want to compare(not the whole table but queries on these tables) and if they differ, I want to shoot an email. I have some ideas how to implement this but not sure whether it is the best approach.
select Acct_id, total from SourceTableA
minus
select Acct_id, total from TargetTableA
select Acct_id, sum from SourceTableB
minus
select Acct_id, sum from TargetTableB
If the result of any of above queries > 0 then I want to shoot an email and want to repeat this procedure in the morning every day.
I know how to implement send_mail procedure using UTL_SMTP package and how to schedule tha job by dbms_job package. But I am not sure how to implement the result of minus query. In case if minus > 0 then I also want to send the name of tables in the email message where source and target tables are not same. Should i use cursor, variable or insert the result in a new table? any help would be highly appreciated. Thanks in advance.
Khan

Actually these queries are the part of our daily testing that we run everyday manually(after the scheduled ETL load) to see if there are any discrepencies between our datawarehouse tables and source tables. So instead of running these queries manually everyday we want to schedula a procedure that will shoot an email in case of any discrepency and indicate which tables have problems.

How can I get Numbers to return the first row in a group of VLOOKUP query results instead of last one?

I'm trying to query from one table (call it Table1) a batch of rows in another table (Table2) using VLOOKUP on a date specified in the first table (Table1). My problem is it's returning the last incident in Table2 of the requested date instead of the first incident. This really breaks the OFFSET scheme I'd like to use to collect the rest of the items for that date. Is there some way to compel VLOOKUP to return the first row of query results, not the last?
NOTE: I see I've asked this before, but forgot to go back and look at responses given. It's been a while and I've limped along until now with the way things were. I'm actually trying to delete this questions, so if you see it, ignore it. I suppose if someone can tell me real quick how to delete a stupid question, that might be helpful.

you cannot delete a post yourself. You can flag the post an request a moderator remove.

Large query result set

Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for search in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It results in
too much memory consumtion in our ejb application. What is the best way to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

you can think of following options
1) paging: read only few thousands at a time and maintain a index to page
through complete dataset
2) caching!
a) you can create a serialized data file in server to cache the result set
and can use that to browse through. you may do on the fly
compression/uncompression while sending data to client.
b) applet based solution where caching could be in client side. Look in
http://www.sitraka.com/software/jclass/cs_ims.html
thanks,
Srinivas
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Thanks Slava Imeshev,
We already have search criteria and a limit. When records exceeds thatlimit
then we prompt user that it may take sometime, do you want to proceed? If
he clicks yes then we retrieve those records. This results in lot ofmemory
consumtion.
I was thinking if there is some way that from database I can retrieve some
block of records at a time rather the all records of a query. I wander how
internet search sites work, where thousnds of sites/pages match criteriaand
client can move back & front on any page.
Regards,
Parvez
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi chauhan,
You may want to narrow search criteria along with processing a
limited number of resulting records. I.e. if the size of the result
is bigger than a limit, you stop fetching results and notify the client
that search criteria should be narrowed.
HTH.
Regards,
Slava Imeshev
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for
search
in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It
results
in
too much memory consumtion in our ejb application. What is the best
way
to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

How to get Query Results based on Analysis Authorization Ranges????

Hi Experts,
I have gone through the lot of SDN Links, however not able to find the answer to my question.
I have an Authorization Issue, NO Authorization
Error : EYE 007 ( Insufficient Authorizations )
<b>Here is the issue:</b>
Need to see the complete query result when I gave the range in Analysis Authorization for Controlling Area 001-005. Controlling Area is auth relevant and right now a variable is inserted in the query for it. If I select Controlling Area 001, the result for Controlling Area 001 is displayed in query. If 002 then also displayed. If I do not enter anything, then I get the <b>Eye 007 error message</b>.
I am not sure how do I display/authorize the entire result in the query for all the Controlling Areas, I have authorized user to see??
<b>Its really urgent, please help..!</b>
Here are the logs:
Authorization Check Log
Date and Execution Time (Local Server)
Execution Date: 06.09.2007
Execution Time: 14:48:41
Executed Query: 0CCA_C11/GBCCA_MP01_Q0002_AP
Executed by User ZBI_TEST_001
Executed with Analysis Authorizations of Another User ZBI_TEST_001
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider 0CCA_C11 with activity 03?
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
InfoProvider Check
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider 0CCA_C11:
0CO_AREA
0TCAACTVT
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider :
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
CO_AREA = '0003'
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Authorized
Subselection (SUBNR) Is Authorized
Authorization Check Complete
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Partially or Fully Authorized (Intersection)   Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
184 ( 0CO_AREA )
Authorization Check Complete

Hi,
    Have you defined the vaule for 0CO_AREA as BT 001-005 in you Authorization for 0CO_AREA.Also how have you defined your Authorization Variable on the query? Have you define as select options or interval? I thing you need to define it as interval or select options.
Hope it helps,
Cheers,
Balaji

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

Stepping through a query result set, replacing one string with another.

I want to write a function that replaces the occurance of a string with another different string. I need it to be a CF fuction that is callable from another CF function. I want to "hand" this function an SQL statement (a string) like this:   (Please note, don't bother commenting that "there are eaiser ways to write this SQL..., I've made this simple example to get to the point where I need help. I have to use a "sub_optimal" SQL syntax just to demonstrate the situation)
Here is the string I want to pass to the function:
SELECT
[VERYLONGTABLENAME].FIRST_NAME,
[VERYLONGTABLENAME].LAST_NAME,
[VERYLONGTABLENAME].ADDRESSS
FROM
LONGTABLENAME [VERYLONGTABLENAME]
Here is the contents of the ABRV table:
TBL_NM, ABRV    
VERYLONGTABLENAME, VLTN
SOMEWHATLONGTALBENAME, SLTN
MYTABLENAME, MTN
ATABLENAME, ATN
The function will return the original string, but with the abreviations in place of the long table names, example:
SELECT
VLTN.FIRST_NAME,
VLTN.LAST_NAME,
VLTN.ADDRESSS
FROM
LONGTABLENAME VLTN
Notice that only the table names surrounded by brackets and that match a value in the ABRV table have been replaced. The LONGTABLENAME immediately following the FROM is left as is.
Now, here is my dum amatuer attempt at writing said function: Please look at the comment lines for where I need help.
      <cffunction name="AbrvTblNms" output="false" access="remote" returntype="string" >
        <cfargument name="txt" type="string" required="true" />
        <cfset var qAbrvs=""> 
        <cfset var output_str="#txt#"> 
        <cfquery name="qAbrvs" datasource="cfBAA_odbc" result="rsltAbrvs">
            SELECT TBL_NM, ABRV FROM BAA_TBL_ABRV ORDER BY 1
        </cfquery>
     
    <cfloop index="idx_str" list="#qAbrvs#">      
    <cfset output_str = Replace(output_str, "#idx_str#", ) 
    </cfloop>               
        
    <cfreturn output_txt>
    </cffunction>
I'm mainly struggling with syntax here. I know what I want to happen, I know how to make it happen in another programming language, just not CF9. Thanks for any help you can provide.

RedOctober57 wrote:...
Thanks for any help you can provide.
One:
<cfset var output_str="#txt#"> 
No you do not need to create a local variable that is a copy of the arguments variable as the arguments scope is already local to the function, but you do not properly reference the arguments scope, so you leave yourself open to using a 'txt' variable in another scope. Thus the better practice would be to reference "arguments.txt" where you need to.
Two:
I know what I want to happen, I know how to make it happen in another programming language, just not CF9.
Then a better start would be to descirbe what you want to happen and give a simple example in the other programming language. Most of us are muti-lingual and can parse out clear and clean code in just about any syntax.
Three:
<cfloop index="idx_str" list="#qAbrvs#">      
I think you want to be looping over your "qAbrvs" record set returned by your earlier query, maybe.
<cfloop query="qAbrvs">
Four:
<cfset output_str = Replace(output_str, "#idx_str#", ) 
Continuing on that assumption I would guess you want to replace each instance of the long string with the short string form that record set.
<cfset output_str = Replace(output_str,qAbrs.TBLNM,qAbrs.ABRV,"ALL")>
Five:
</cfloop>               
If this is true, then you are looping over the record set of tablenames and abreviations that you want to replace in the string.

Date format in Query Result Window

In recent versions on OSD (trying with V3.2.20.09 Build MAIN-09.87) I've been unable to change the date format for results shown in the query results window via the NLS settings in Preferences, it's the same for other users on v3 in my area. Can anyone advice on whether anything can be done to resolve this issue or is there a bug in recent additions of OSD
Frustrating having a result show as 01-DEC-12 and I don't know whether it's 01-DEC-2012 or our default date of 01-DEC-4712 without having to hard code a to_char in my sql which I don't want to be doing all the time to analyse my results
I have an old version 1.5.4 Build MAIN-5940 and changing the NLS settings in preferences refrects correctly in the query results window
Any advice appreciated, Thanks

Thanks, looks like it's permission, tried on a different database supposed to be the same and it works when I update the preferences or run the alter session statement. Call to my admins to get on the case
Ta
for anyone else having simular issues, help are the statements I've tried to confirm it's permissions
alter session set NLS_DATE_FORMAT = 'DD-MON-RR HH24:MI:SS'; -- Original
alter session set NLS_DATE_FORMAT = 'DD-MON-RRRR HH24:MI:SS';
commit;
SELECT *
FROM nls_session_parameters
Edited by: lakeuk on 14-Nov-2012 06:37

Query result caching on oracle 9 and 10 vs indexing

I am trying to improve performance on oracle 9i and 10g.
We use some queries that take up to 30 minutes to execute.
I heard that there are some products to cache query results.
Would this have any advantage over using indexes or materialized views?
Does anyone know any products that I can use to cache the results of this queries on disk?
Personally I think that by using the query result caching I would reduce the cpu time needed to process the query.
Is this true?

Your message post pushes all the wrong buttons starting with the fact that 9i and 10g are marketing labels not version numbers.
You don't tune queries by spending money and throwing resources at them. You tune them by identifying the problem queries, running explain plans, visualizing their output using DBMS_XPLAN, and addressing the root cause.
If you want help post full version numbers, the SQL statements, and the DBMS_XPLAN outputs.

Query Results - failed with exclamation mark on icon

Hi there,
When I run a select query I now get an exclamation mark on the green arrow icon in the Query Results. I've been able to run this query before and no changes have been made.
In the Query Results window if I click the 'reload' icon (two blue arrows) the Output results flash up and then clear.
Version 3.0.02   //   Build MAIN-02.37   //   Java Platform 1.6.0_11
As far as I know I have not made any configuration or database connection changes. This issue appears on all DB connections and all SQL I try to run.
This appears to be the error:
java.lang.NullPointerException
    at oracle.dbtools.worksheet.sqlhistory.db.HistoryDB2.getRowFor(HistoryDB2.java:43)
    at oracle.dbtools.worksheet.sqlhistory.SqlEditorHistory.saveSql(SqlEditorHistory.java:85)
    at oracle.dbtools.worksheet.StatementRunnerResultsPanel$4.taskFinished(StatementRunnerResultsPanel.java:287)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskAdapter.stateChanged(RaptorTaskAdapter.java:95)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.notifyListener(RaptorTaskDescriptor.java:143)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:370)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:352)
    at oracle.dbtools.raptor.backgroundTask.RaptorTask.setStatus(RaptorTask.java:257)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.done(RaptorTaskManager.java:479)
    at java.util.concurrent.FutureTask$Sync.innerSet(FutureTask.java:251)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:500)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:619)
Closing/reopening SQL Developer doesn't help. I've restarted my PC and the results do appear, but then the same error appears again.
Any help would be much appreciated. Thanks.

Hi Jon_Male,
A couple of points:
1. Your release is a bit out-of-date, plus it seems to be an early adopter release rather than the 3.0 production release (3.0.04.34).
2. The following old forum post discusses the same behavior occurring after an OutOfMemory error: exclamation mark on script output tab
Regards,
Gary
SQL Developer Team

Refresh characteristic texts in query result without logoff in Bex 7.0

Dear Experts,
I'm using a query in BEx 7.0 and switched off all caching parameters in RSRT. For instantly reloading values from Cube/DSO this is working fine.
Some of my characteristics are shown as key + text in query result. Unfortulately these texts are not updated during the query reloads. I do not want the user to logoff / logon the report to get the updated texts.
Interestingly, after a refresh the texts for those characteristics are updated immediately for all filter items, but not in the result area.
Could you give me a hint, how I will be able to refresh those characteristic texts as same as the values in the infoprovider? E.g. using VBA makros or by customizing of specific workbook settings?
Thanks for your help!
Kind regards,
Tim
Edited by: Tim Kley on Apr 19, 2010 2:42 PM

Hi,
what have you achieved so far concerning this.
My post from today was also going in this topic.
In Bex update after attribute change run
The setting of this paramter I mentioned there could maybe help in your case.
   transaction "RS_FRONTEND_INIT" add the parameter "ANA_ENHANCE_REFRESH" with value "X"
   o Open the analyzer and connect to system to open WB
   o Click on the refresh button
   o New functionallity "Full Refresh Of Active Queries" is now available.
Best regards Harry

Query result help

Similar Messages

Maybe you are looking for